PC saying disconnected speakers?

Similar Questions

• Whenever I have I try to log in to my user account, it says disconnected a few seconds after clicking on the image to open a session. Any help to solve this problem?

  Well, when at the start screen, I can connect to the admin account, but I can't log in to the user more. It says disconnected when I connect.

  I suggest that you run a full scan with your AV currently installed, and/or both linked below, just to make sure that your system is clean.

  Malwarebytes (free) AV

  http://www.Malwarebytes.org/

  SAS (SuperAntispyware) free.

  http://SUPERAntiSpyware.com/

  Remove anything found and restart after each scan.

  If you find malicious software, run the scans up to their own. When you have finished, try again to load the user profile to see if the problem persists and if he does, refer to the link below for more detailed troubleshooting tips

  http://support.Microsoft.com/kb/947215

  Let us know if you have any other questions.

• OfficeJet 4500 Solution Center says "disconnected".

  I got this HP Officejet 4500 since last October and he has no problem, but something that came just earlier, I get this message on the solution Center HP saying that the printer is disconnected, but everything IS linked and it works.  Y at - it no adjustment I could do short of re - install the software?

  I was on the point to re - install the software but I ran my registry cleaner first, and that solved the problem.  Thanks for your comments.

• Sansa clip froze screen message says "disconnected".

  My machine went on mode standby mode when it is connected with the Sansa clip. I grew up my machine and unplugged the USB Sansa, since then clip shows a message "disconnected." Even if I'm trying out or other options it still shows offline message. I tried the firmware update, but it says that no product can be updated sansa is recognized.

  I hate it when this happens.  The Sansa off, slide the switch to the position IT and hold it there for 10-15 seconds.  This will be a soft reset of the device.

  It should now light up normally and will be recognized by the computer again.

  You can prevent this catastrophe wee by configuring the USB to stay in standby mode. With the trendy Sansa, in Device Manager, go to Bus USB controllers, and expand that.  You will see a list of ads from hub USB root at the bottom of the tree.

  Starting at the bottom, click twice on each one and select Properties.  The Sansa is hidden in this point of view, but it is be clicking on the current tab.  When you have found the position of hub with the Sansa listed, click the power management tab, and uncheck "allow the computer to turn off this device to save power".

  Please note that the Sansa Updater will modernize only the firmware currently installed the latest version, but it is not designed to reinstall the same version, as in the case of a repair.  To reinstall the same version, you must follow the instructions to install the firmware manually.

  In this particular case, I don't think it will damage your firmware.  The soft reset should do the trick.

  Bob

• my wifi doesn't connect not - says disconnected by the mobility center - but no tile reconnection

  Compaq presario cq57 windows 7

  Wi - fi connection, error message stop said was disconnected by the mobility Center, but there is no tile

  to reconnect as it is on my other laptop. drivers update I tried, but they said ok to update and functional

  grateful for any input

  Thanks for the reply kathles.
  
  If the wi - fi button is blue, which means that it is enabled, it can be excluded that the issue.  I do not see a physical switch on this laptop be so that is also excluded.

  Then I would like you try to remove the device from Device Manager driver.  Then restart the laptop without having to reinstall and see if Windows detects new hardware and invites you to reinstall the driver.  Doing it this way should erase all settings disable the device and force it to reset itself.

  Let me know what the result please!

• HP Photosmart all-in-One D110a: Solution Center says disconnected printer, can still print documents, but cannot scan

  No problems before the upgrade windows 10. Solution Center says offline wireless printer but I can still print it. Works on windows 7 without any problem for years, has been working for 9/2015 when I upgraded to W10 and the uninstall update KB3132372. Stopped working today. Cannot scan, but the network is in place. Rebooted everything several times. No recent upgrades or software changes.

  Hi @mikealpha,

  Because there was a registry error in your installation, you will need to uninstall and reinstall the printer software. Below, I've posted some links to documents that offer instructions on how to uninstall, and then reinstall the HP software. Please try all the steps in order and get back to me with the results.

  HP printers - uninstalling the software of the printer (Windows)

  HP printers - Download and install the printer driver and software Via USB

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• No sound from my laptop! in the control panel it says internal speakers are turned on and works but it is still no sound

  Yesterday there was no sound... today no sound?

  in the Panel, he said internal speakers are turned on and working, cannot restore the system that do not have a point to return to.
  can anyone help?

  Hello

  You have made any changes to your computer recently?

  I suggest you to follow the steps from the link and check if it helps.

  No sound in Windows

• Creative cloud says "disconnected" but will not let me connect. Tried all solutions on the login page errors creative cloud 3.

  Creative cloud tells me I am disconnected and will not let me connect. I tried quiting and restarting the program. I tried to configure the automatic detection of the local network settings. I also tried to delete the opm.db. Still does not work.

  Hello

  You can refer to the Thread -: error "You have been disconnected" whenever I try to connect to the creative desktop application cloud

  Also try:- cloud creative connection errors

  Hope this helps!

• BlackBerry Smartphones Blackberry Desktop Manager says disconnected

  BlackBerry 8330 Curve

  BlackBerry Desktop Manager 4.3.0.17

  XP Professional

  Microsoft Outlook 2007

  BlackBerry Enterprise Server Sync

  Installation USB and drivers of Modem (DM4.5_B13)

  Tried:

  Uninstall / reinstall office several times Manager

  Tried 3 different cables for USB and 4 laptop computer ports

  Our IT spent 3 hours without success either guy

  Removing battery Blackberry

  I myself have solved by editing the registry and remove any reference to Sprint and Roxio.  Then I reinstalled the Blackberry desktop software 4.7 v, restarted and installed Sprint SmartView.  It works now.  The key for me has been editing the registry to remove previously installed pay software.

• Internet "disconnected" on a regular basis

  I bought my Toshiba Equium A300D Tuesday, which came with Vista Home Premium and since then I had problems with the internet "disconnect" on a regular basis - I say "disconnected" because in reality there is nothing wrong with my connection to all the.

  I have a local network set in place with the A300D, an address book remove but not Toshiba, one and an old desk. The Office has a wired connection to my router and two laptops have wireless connections, but neither the second laptop or fixed, are having problems with the connection, only the A300D.

  My ISP reports no problem, and my router has been for more than a week now without requiring a reboot. On the A300D but I apparently lose connection on a regular basis, with my browser (which happens with Firefox, Opera and Internet Explorer) don't find no connection and the pages won't load do not.

  Finally, if I try and refresh the pages, browsers just crash (and in the case of Firefox, it is often impossible to end the process with Task Manager, which means I'm unable to re - open). The Google Desktop Sidebar is also losing the connection too at the same time, as a number of other applications using internet connections, * but * Vista, when I try to 'diagnose and fix' the problem is said it isn't a problem, and a few other apps, my backup Carbonite and Skype service are the two remaining connected (and experience with my old laptop if there is internet connectivity problems Skype is usually the first thing to disconnect).

  At first, I thought it was a problem with Firefox (my main browser), but as is the case with others too, it doesn't seem to be a simple matter of Firefox. Malware scan (Windows Defender) and antivirus (Eset NOD32) come to clear back, and it makes no difference if my firewall (ZoneAlarm) is in place or not, and I tried it with just the WIndows firewall as well.

  Everything is going well for a while, but then suddenly I apparently lose the connection and once again, the only way to get it back is to restart, and once again things will be fine for a while until the browsers lose the connection (if as I said, Skype and Carbonite are still connected). At present on average I'll have to reboot every half hour or so, which is very frustrating and I'm getting little done for this reason.

  I tried to look on the Vista from MS community support forum and a number of people seem to have problems with Vista - I was unable to post my problem here but in regarding the site for some reason MS refuses to accept my Windows Live IDs, and a google also found similar problems that appear to be related with Vista and SP1.

  A number of discussions mentioned this could be linked with the TCP/IPv6 protocol, and that to disable TCP/IPv6 as a temporary workaround might work, and when I checked my connectivity TCP/IPv6 connection parameters has been showing as "limited." Disable TCP/IPv6 has however made no difference - I still have to restart every half an hour or two to get things running.

  I am at the end of my home here - at - it ideas?

  Try the following:

  (1) update the driver Wireless LAN from Toshiba Europe site

  (2) update the BIOS from the Web of Toshiba Europe site

  (3) update the Firmware on your Wifi router. Some routers have some compatibility problems with some wifi chipsets.

  (4) go to the Device Manager-> Wifi-> properties and disable power management, increase the output power, disable 802. 11A and others that you do not use.

• Portege R700 - Telstra and Dodo SIM cards disconnection

  I have a new R700 and I am having trouble using my Telstra cards or Dodo SIM internally using the Toshiba Wireless Manager. Two of cards using the USB modems however if used internally during the connection work, it immediately fails and says "disconnected". The signal levels are good and all networks are detected ok. All network configurations seem to be correct. Can someone help or advise on the use of these SIM 3 G in Australia on the R700 cards?
  Chris

  The card SIM of Telstra can lock onto the USB Modem. You will have to perhaps call Telstra and ask them.

  Also, check that the AFN.

• My speakers are plug but he repeats to me is not

  Help me keep ples saying my speakers is not connect but then cheak 5 times

  Hello

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  1. What is the number of brand and model of your speakers?

  2. what operating system is installed on your computer?

  3 - is the speaker not detected in Device Manager?

  4. If it works well before?

  5. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps from the link below.

  Method 1:  Try to run the built-in troubleshooting utility and check if it helps.

  Open the Audio playback problems troubleshooting: http://windows.microsoft.com/en-US/windows7/Open-the-Playing-Audio-troubleshooter

  Method 2: No sound in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is useful.

• my printer says offline and will not print. How can I get this back online?

  I tried to reinstall my printer. I also tried have disconnected and reconnected everything in.  I tried to turn my computer off and turn it back on and it still says disconnected and won't pring

  Try opening your control panel, click Printers and right click on the printer in question and choose printer use online, which takes at least my printer from offline on loan...

• Printer disconnected

  I have a HP Photosmart C4795.  I print a document and pages were print tablecloths in position up, so I took out the paper to solve the problem.  After that, I got a "printer offline" error message.  I tried to restart the printer, my laptop, have disconnected and reconnected in.  I even downloaded updates of the software of the printer from the HP website.  Now, it says "disconnected printer.  I don't know what to do.

  Any help would be appreciated.

  Thank you!

  D

  Hello @dnothwehr,

  Welcome to the Forums of HP Support! I understand your HP Photosmart C4780 shows offline. You tried to restart the printer, laptop computer, do a hard reset of the printer without success. reset.

  I would like that run you HP print and scan doctor- it was designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  If you run the PSDR and still get the error the printer offline, I would like to continue you here: "Printer is off-line" Message appears on the computer and the printer does not print

  I'll watch for your reply, please let me know the result.

  Thank you

• Audio stereo Bluetooth "disconnected."

  Greetings!

  I have recently upgraded to Windows 7 from Vista. I was with a headset Bluetooth de Motorola S9 - HD in Vista for listening to music and it worked very well. However, now that I'm running Windows 7, it doesn't connect as a Bluetooth stereo sound. It connects as a headset for hands-free conversation, but not a stereo headset. When I try to connect as stereo headphones in the Bluetooth options it says connection then it says disconnected. I even tried to disconnect the hands-free kit and then the bu stereo audio connection that does not work either.

  I tried to update the bluetooth drivers, but that does not work either. The hands-free headset isn't even like a play option in the sounds menu.

  Help, please!

  Thank you!

  Hi jrw14493,

  The exact error message will be required to understand the problem in a better way and troubleshoot accordingly.

  After the installation of the new operating system, windows will load the generic drivers for devices. It is always recommended to have the latest drivers for the operating system of the manufacturer's Web site. Download and install the latest drivers for Bluetooth.

  During this time, you can consult the following links:

  Solve problems with Bluetooth devices: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

   

  How to troubleshoot Bluetooth devices!: http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/2fdc6964-78f6-468f-98c2-a1a9c7ffadce

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.