PE8: Cannot burn disc from working only area?

Similar Questions

• Cannot burn DVDs from the tv recorded in media center

  I have a Dell XPS laptop with Media Center tv tuner.  I have no programs stored for a while but recently.  However, after recording a television with success, I want to burn to the disc.  However, when I put a dvd disc, nothing happens.  Nothing comes up asking if I want to make a copy as it used for a year or two ago.  I tried to watch a movie in the disk drive and it works, but time and time again, can't burn movies recorded on the disc.  Helping an older person!  Thank you.  Oh... computer is no longer under warranty (5 years).  I have the windows xp operating system

  Download and install Sonic Encoders: -.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-30721-1

  Read also: -.

  http://Windows.Microsoft.com/en-in/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  S.Sengupta Media Center MVP

• enter in safe mode then I can burn discs from system restore...

  I have a very dead battery on mySony computer Vaio laptop, I failed to connect before the battery died and my laptop is closed.  When I plugged in, it turned on and click on "Start windows normally", I get "windows failed to ADO because the system registry file is missing or damaged.

  I have been informed that I have to perform a full system recovery, but I need to be able to get into safe mode, so I can burn my recovery discs, as they did not come with my computer.
  How can I get in safe mode so that I can burn my recovery disks?
  Or y at - it somewhere I can download and burn the recovery with another computer disks?

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Click on Vista in 'Summary' above the link to get Safe Mode instructions.

  Use the F8 , or the ways of msconfig .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Read this info re using your recovery Partition back to factory settings:
  

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them how to use the recovery on your computer/laptop Partition to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• It cannot burn DVD from ISO file.

  I can't burn an ISO file that Proshow Gold (PSG) made to burn a DVD on my DVD.  PSG made the file ok and it seems complete with what files I expect on a DVD, but if I right click on the file... Win 7 does not have the option "BURN to DVD".   If I try to burn the file manually... I get an error that says: "not a supported file Type.

  I played with it for 2 hours... What am I doing wrong?  (Note: I burned the DVD before, but never with an ISO file.)

  I can't burn an ISO file that Proshow Gold (PSG) made to burn a DVD on my DVD.  PSG made the file ok and it seems complete with what files I expect on a DVD, but if I right click on the file... Win 7 does not have the option "BURN to DVD".   If I try to burn the file manually... I get an error that says: "not a supported file Type.

  I played with it for 2 hours... What am I doing wrong?  (Note: I burned the DVD before, but never with an ISO file.)

  =============================================
  The following article might be worth a visit:

  Windows 7 - burn a CD or DVD from an ISO file
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-from-an-ISO-file

  And... the free ImgBurn is another option.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Ignore most of the download buttons and click to the left of the
  green circle with the white arrow... He says...
  «Click here to download»

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (Windows XP / Vista / 7 / 8)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorial is maybe worth a visit:

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

• Cannot burn disc when the disc is present inside the car

  Original title: dvd/cd writer does not recognize a disc to burn even when there is one in there

  Why my computer won't recognize that I don't have a cd-rw or dvd rw to burn files?

  Hello

  1. do you get an error message?

  2. what applications do you use to burn the disc?

  Method 1: Run the Troubleshooter and check.

  Open the troubleshooter of reading and burning CDs, DVDs and Blu - ray discs

  Method 2: perform operations from the link and check.

  Change settings for burning a CD or DVD in Windows Media Player(Windows 7)

  Hope this information helps.

• HP 1536dnf: M1536dnf cannot send faxes from charger only from glass.

  I can't send faxes to high feeder if I place the fax on the glass. Message I get is always "the fax storage" and the makers of fax to be sent. Updated firmware to date with no solutioin.

  Welcome to the HP community @perlfather,

  I read your message on the message "memory fax" you're noting on your LaserJet M1536dnf and no faxing. I suggest you power reset of the printer and to make sure that the printer has a connection directly to a wall jack, avoiding power bars and surge limiters.

  • Turn on the printer.
    With the printer, unplug the power cord at the back of the unit.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord into the wall outlet.
    Reconnect the power cord to the back of the unit.
    If the printer does not by itself, press the Power button to turn it on.

   

  Let me know what happens please. I will do my best to help if necessary!

  Send me a 'thanks' by clicking on the thumbs upward! If these steps help to solve the problem, please press "Accept as Solution" too!

  Best wishes!

• Error: Insert the CD into the CD player when trying to burn disc Windows Media Player

  Original title: cannot burn music from WMP.

  Try to burn music from Windows Media Player, does not drive D: burn:

  A cd I burned another computer, read in my drive D: as "CD ROM".  But I got a 'blank' CD - R in drive D: and it has not recognized - msg "INSERT CD into DRIVE D:" only.

  I don't think I have a drive for burning CDs. -correct?

  007Trina

  Hi 007Trina,

  1 you get an error message when trying to burn the disc using Windows Media Player?
  2. what version of Windows Media Player?

  It seems that the CD is not recognized as a recordable device. We recommend you to try the steps mentioned in this article and check the difference:http://support.microsoft.com/kb/316529

  For more troubleshooting, see How to troubleshoot problems that occur when you write data to an optical disc CD-R or CD-RW in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot copy images from any type of disc. ??

  Cannot copy pictures on any type of disc. the computer behaves as if she is unable to format the drive? I thought that this was done automatically.

  Hello

  ·        What is the exact error that you are experiencing when you try to burn the disk?

  ·        Outside photos, you are able to burn other files on the disk?

  ·        You use any burning software to burn the photos to disk?

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I suggest to format the drive and check if you are able to burn discs or not. Follow the steps mentioned below.

  a. be aware that Windows XP, in its native form, does not directly support CD formatting. Formatting a CD requires support for the ISO images that is missing from Windows XP.

  b. download or buy CD and formatting of third-party burning software. Third-party CD utilities include features like CD burning, imaging of CD and the CD put fit.

  c. install the third-party software, following specific instructions in accordance with the software documentation. Many programs will require you to restart Windows to complete the installation. Close all other applications and do it.

  d. place the disk you want to format in the drawer. Make sure that it is in the drawer of CD - R or CD - R/W and not another tray (tray of DVD) or a simple CD player.

  e. start the third-party application and follow the instructions on the screen as they appear. Choose the "Format CD" option on the file menu, or choose 'Create a new CD.' This application controls tend to vary an application to, so be sure to check the documentation.

  f. don't forget to leave the CD in the taskbar until the process is completely finished. If you remove the CD before the completion of the formatting, you will ruin the disc.

  g. give a volume name to your new CD.

  I also suggest you to check the article mentioned below.

  Should which CD or DVD format I use?

  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  Note: This article also contains information about Windows XP.

  I suggest you run the fix it is present in the article below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Why DVD players does not work? Indeed, DVD player works ONLY playback,... but doesn't work NOT to the write/burn any DVD/Sony and Memorex, etc..

  Hello:

  DVD players, both came with the PC and MSI DVD - Rom I bought through the Internet works ONLY for playback of CD - r and DVD - r, but the two do NOT write/burn brand new DVD and CD - R, popping up in the middle of the screen,... Please insert the blank in the E floppy when I actually inserted in the DVD drive.

  I have uninstall and rebooted the PC, in the hope that readers DVD works OK,... but nothing helps.

  Wonder if the registry damaged for DVD player, or what other problems causing this problem?

  Any help on this would be greatly appreciated.

  Hello

  Have you checked if the CD/DVD drive you purchased is a recordable disc? If this is the case, there should be an indication (e.g., CD-RW/DVD-RW). You can also check for the indication Device Manager.

  If you have confirmed that it is indeed able to write on the discs, then try to activate the IMAPI. To do this please see the instructions below.

  1. click on start

  2. click on run

  3 type "services.msc" (without the quotes)

  4. in the window that opens, you select IMAPI

  5. right-click on it and select "Properties".

  6 start the services.

• I am trying to burn a DVD using Movie Maker, but every time I burn it to disc, what happens at 60%, then all I get is "unspecified error cannot burn the disc?

  I created a movie after the import of videos and images, first after their conversion to Quicktime version to a version that would play in Windows. I made the movie and it plays well in Movie Maker and starts ok when I burn to disc, but happens about 60% each time and then just says it cannot create disc because of an unspecified error. So, I don't know what I have to do? Any help? Thank you.

  It may be interesting to try to publish (save) the project of a
  folder on your drive hard in the. Film WMV format.

  If it works... then import it. File WMV in DVD Maker.

  The following articles explain how to save:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

• my windows box works only in normal mode, cannot run in safe mode.

  my windows box works only in normal mode, cannot run in safe mode, in the fourth stamp corner with 'safe mode '. And when the loading starts there is a note: "3 processor system, multiprocessor kernel". When I run the Action Center in reliability monitor there is a note: "DefaultTabSearch.exe stop working. And when I check in the user account, in the tab - configure advanced user profile properties, there are 3 users: '1 default pofile (1.63 MB)' - "2nd computername\NameFileFolder (20.6 GB)" and "3rd computer name\updatus (58, 2MB)» Please give solutuion for this problem.

  I tried to restart and press F8 and already choose all the list of options, and the result is noting changed.

  Hello

  1 did you change on your computer before this problem?

  2 have you tried to run the Startup Repair tool? If so, what was the result? For more information, refer to this link: Startup Repair: frequently asked questions

  As you're able to boot in safe mode, you can restore the system back to its previous state when it was working fine:

  a. click Start, type system restore in the Search box and then in the list click on the system restore program.

  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click choose a different restore pointand then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  
  Reference: System Restore: frequently asked questions

  Hope the information is useful.

• CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 does support OpenCL and OpenGL?

  Are all features that CS6 supports for NVidia Cuda available for the M6100 OpenCL?

  Bill supposed to first Pro CC (not CS6) response. Windows of Premiere Pro CS6 version does not support OpenCL for accelerating GPU of MPE. Therefore, there is no "opencl_supported_cards.txt" file in the folder of Premiere Pro, and the code to OpenCL is disabled permanently in all versions of Windows from Premiere Pro CS6. So, for your over-pants M6100 Premiere Pro CS6 will be permanently locked to only software MPE mode. (Acceleration GPU of MSES in the Windows of Premiere Pro CS6 version is limited to the CUDA only, which means that only NVIDIA for GPU - no AMD over-pants or GPU Radeon support CUDA at all.)

• Latitude D610 - able to read discs, but cannot burn

  I have a laptop Latitude D610 I use for business purposes.  Once a month I have to burn word and Excel files on a disc to send to our customer.  Last month I went to burn and the drive is no longer burning the files to a blank disc.  I tried several discs, I also tried to reinstall the drive.  Today, I replaced the drive with a laptop replacement, we have on-site.  I'm still not able to burn.  Most of the time it will not detect a disk if the disk is empty.  Discs with the media are read without any problem.  Any ideas?  I want to get this working so I can't keep my boss for burning the computer loan.

  Latitude D610

  Windows XP

  CD-RW/DVD-ROM Dell Part #8W007-A01 (supplied with the machine)

  Managers of device says its working properly

  When I click on the drive with an empty disc, I get the message next - D:\ is not accessible. incorrect function.

  All other discs with media work very well.

  Message edited by cgillen on 03/26/2008 09:28
  
  

• HP Pavilion x 2: computer hp laptop pavilion x 2 works only when the Tablet is removed from the keyboard

  Hello

  My 3 year old hp pavilion x 2 removable 2 in 1 touch screen works only if detached from the keyboard.  It has been for the last couple momths stop without warning whenever it was moved slightly while attached to the keyboard. Now it doesn't work at all and stops as soon as I connect it to the keyboard. Everything else works fine. Any help is appreciated. Thank you.

  Pat

  Hello @pmm25,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the problem of keyboard and wanted to help you!

  Given that the question seems to be hardware related, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Burned discs are not playable except on my computer

  Burned discs are not playable except on my computer!  How can I solve this problem?

  Hello

  Use the mastered Format to burn the discs, so you can read about other players. Even their use
  in a car drive.

  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Burned CD does not not in car CD player
  http://www.andybrain.com/archive/MB/burned_cd_in_car_player.htm

  Why the CD player in my car does not play the CD that I burn?
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0091.mspx#EKF

  Check with the experts here
  http://Club.myce.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">