People hear my helmet through my output sounds

Similar Questions

• Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

  Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I understand from your description, that you get beep when the camera is focusing.

  To better understand the question, please answer the following questions:

  1. have you made changes on the computer before this problem?
  2. is it works much earlier?

  Come back with more information to help you better.

  I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

  You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  For more information, see the link below:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• notification through bad output device sounds

  I just noticed that my opinion sounds (messages specifically) play in my speakers system even when they are not selected as the output device. I have currently a USB headset connected to my end 2012 27 "iMac running the latest version of El Captian and my message notifications play aloud while all other system sounds are coming in my helmet. Anyone know of a solution for this?

  Thank you

  What you have chosen in the preferences-> sound effects system?

  

• My IP6S - people try to call but can't get through. No sound for calls and messages

  Hello

  With the last 2 ios9.3.1 of recent updates, my IP6S went crazy. A few times it didn't ring for incoming calls, that it goes straight to missed calls. Ditto for the incoming message for SMS or Whatsapp. Ive tried already turned off the phone and even to reinstall updates again its have the same problem. This is not funny effect on my other phone IP6. Help, please

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support

• My speakers does not work when I talk on the phone but when I have my headphones or have the phone up to my ear people hear me perfectly fine, please help.

  My iphone does not work on audio speaker and everything is perfectly fine, but when I'm on the phone and put my phone on speaker, no one can hear me not at all, but when I have the phone to my ear, or have headphones in people can hear me very well. I don't think it's a software problem, that my phone is updated with ios 9.3.5. Can someone help me please on this issue.

  Force restart the phone now sleep and home for 10 seconds, button until the Apple logo comes back again. You won't lose data.

  Have you tried plugging the headphones into an output a few times?

  Does say "headphones" when you toggle the volume and no headphones attached?

  More tips here:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

• I can't hear my friends, but Skype normal sounds work fine

  Recently, I noticed a bug where I can't hear my friends, but they can hear me. I can still hear normal Skype looks for incoming calls. I have the Razer headphones, and I have updated the software. I also tried /golive, but I can hear them yet. The only solution I found was to switch the sound around my speakers, which is really annoying for games. Is there any solution for this?

  Hello

  Problems with a helmet of Kraken are known by Skype and a fix is being.

  Hope that helps.

• I hear only left with 5.1 sound on Satellite P100 system

  Hello!

  I have a P100-347 and a logitech 5.1 sound system.
  The logitech 5.1 has 3 connection: 1 is connected to the Line-In input, the other to be connected to the output and the 3rd to be connected to the Microphone Jack.
  When you use it on my desktop which has a card at random his SIS, it works fine.

  Yesterday I plugged on the P100-347, but I don't get sound from the line out jack. I have changed the preferences of 5.1 sound, but it makes no difference... I only get sound from the line out. Y at - it an update of drivers that I need to do or everyone is aware of this and how can I solve this problem?

  Just one thing... With the laptop came this "Express Media Player recovery CD" cd, what is? Is this something to install after runing the "product recovery CD" in order to install drivers or anything that is in the cd that came with the product as well recovery CD? Anyone know?

  Thank you.

  Hello

  There's no problem. As you say the laptop supports Line-in; helmet & S/PDIF jack, and microphone.

  If you want to connect the stereo or another device, you need to choose the helmet & taken S/PDIF. Only this port provides the audio output.

  The two takes another only provide the function to a signal (sound) reception!

  My laptop has the same plugs and I connected the laptop to stereo (5 speakers) via a Y-audio cable like this:
  http://images.Belkin.com/F8V235-06/FUL1_F8V235-06.jpg

• problem of output sound iOS

  Hello

  I'm working on an application of sound processing, which records the sounds first using the microphone and later plays the transformed sound dynamically using SampleDataEvent.SAMPLE_DATA event.

  It works perfectly on the iPod Touch devices, but there is a problem with the iPhone. Recording and processing are very good, but the sound is played through the ear speaker, not the speakers. Do you know how to solve this problem and route the audio output to the speakers of the iphone?

  Thank you...

  Hello

  We are aware of the problem that you see on iPhone and working on a solution.

  What happens is that when you use the Microphone API, the operating system uses the speaker in the receiver on the iPhone as the audio output by default instead of the enclosure of the device. As you pointed out correctly the problem does not occur on iPod or iPad as it has a speaker device on these devices.

  While we are working on a solution, we ask you to please use the headphones when you use your app on an iPhone.

  Concerning

  Frank

  (AIR engineering)

• Play two sound waves through two different sound cards at the same time?

  Hi all.

  With the help of old ship poles and the example of screw provided with Labview 2009 SP1, I could get a part of the path.

  The goal is to simultaneously play two .wav files, to two different sound cards. So far:

  (1) I can play a wav file for each sound card

  (2) I can generate two sinusoidal waves of different tones and put each two cards separately at the same time.

  But when I replace these two tones of #2 with .wav files, wave files play in turn. If wav_1 plays sound_card_1, THEN wav_2 plays sound_card_2, not simultaneously.

  It is even possible to play 2 wav files simultaneously on different maps?

  I've included a VI of the attempt to #2 above. WARNING: my labview skills are minimal and this vi was very experimental is probably terrible form.

  Why do you want to do this. Many modern sound cards have 5 channals output

• Output of different analog signals through 4 outputs

  Hi all

  Exit 4 different analog signals from the PCI 6711 map: I need help.  I intend to use the waveform function from the palette of analog generation vi.  My goal is to be able to enter the 4 necessary functions, it sampling information and then leaving four available analogue outputs available to the Board of Directors.  I saw the code example for the output on multiple lines, but it doesn't seem like he is able to create unique waveforms through the exits, they are all the same waveform.  I've attached what I thought work, but I can not get my number of rows in the data to match my number of rows in the task.

  Specifically, choose instance polymorphic Analog-> multiple channels-> multiple samples-> 1 D wave.

  Your current instance you chose is for just a single line.

• How can I activate the output sound

  The speakers I plugged in the job just fine so I know it's not that. It is a parameter which must be applied and I'm not sure exactly what steps to follow to activate the audio output

  Hello

  To turn on sound follow the steps below:

  a. right click on the speaker in the system tray icon and select read.

  b. Select speakers and choose Properties.

  c. under use of the device, select use this device (enabled).

  d. click on apply to save the changes.

  Hope this helps,

• No sound through speakers, no sound through headphones, with the exception of a few videos.

  DV7-6c90us w/Beats audio Entertainment PC. IDT High Definition Audio Codec. The drivers are "up to date". Device Manager indicates that this sound card does not work correctly. No sound through speakers. No sound of Blurays / DVDs. DVD reading slow and erratic. Sound will play with some videos, both on the hard drive and online. Sounds Windows play in the headphones. I did a scan of root of Avast Antivirus and PC Cillin Housecall. Not found any viruses.

  Please, any help would be appreciated.

  Download & save the last Audio driver. Go into the Control Panel, programs & features - software uninstall IDT. Reboot the laptop. After loading Windows, install IDT audio by using the downloaded file.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5218634

• I have a mac pro I will be able to use my hearing aid resign through it as my phone i 6 more

  will be my mac pro sport resound hearing aids

  You can probably not too connect your hearing aids to your Mac.

• My headset, front hook, works very well, but without a helmet I have no sound

  I have a capacity of Realtek and have updated the driver.  However, when I plug the headphones I have sound but when they are disconnected I have no sound.  Someone has to help me make sure I have all my setting for the correct sound.  (All volumes are turned upward, I know).

  Hi JeromeLenczowski,

  Welcome to the Microsoft community. According to the description of the problem when you plug the headphones you have sound, but when they are disconnected there is no sound. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  I'll help you with this problem. I suggest you follow the steps in the article.

  Tips for solving common audio problems

  No sound in Windows

  See this article for more information: sound cards: frequently asked questions

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Working with multichannel sound in hearing

  I am fighting to get my head around what appears to be a multi-channel workflow rather restrictive in Adobe Audition (CC2015). I produce a soundtrack multichannel for a film, which in this case is likely to end up as 5.1, but I'm also going to require stereo mixes. I also sometimes works in other multichannel formats as standard 5.1 - so sometimes I produce compositions in 8 channels for example.

  Hearing seems to allow the outputs Master to put in place such as mono, stereo or 5.1, when you create a new sequence. This cannot be changed after the fact at all. With the output value Master 5.1, the individual titles in the multitrack session have miners instead surround sound stereo Pan controls. For this reason, it seems to me very tedious to produce a stereo mix of a project built in 5.1 - because I really want to use a traditional stereo miners when mixing in stereo (of course, you can assign sounds to the left and right speakers only with the surround panner, but the surround panner is not simplicity and ease of use of a traditional pan for a stereo mixer designed for 5.1).

  Also, I started often 5.1 mixes by building my calendar first in stereo, before later "extrusion" my stereo composition in a field surround sound.

  Further on the issue, I often make you use the two miners stereo and surround sound miners of the same project, depending on where I want to put a sound in multi-channel and what kind of movements in space may be required. It seems to me that you can work with one or the other in a multitrack project, I'm good?

  The best compromise I can find at the moment involves the implementation of new sequences with the stereo master outputs but creation then bus to L, R, C, Ls, and Rs (if I wanted to produce stereo and 5.1 mixes). At the mix to the forefront, I think you can export each bus independently, so it's a way to get a multi-channel output (exporting stems for each channel bus) exported from a multitrack stereo project.

  The Audition Installer seems to make these workflow of stereo stereo - multichannel - very difficult, and I was wondering has anyone found ways to work around that? As is - this something that could be dealt with in future updates of the program? I worked for years in Logic Pro and this type of workflow is easy to achieve.

  Thanks for your response-

  ""I don't know if it will help, but if direct you the output of a track of output rather than the 5.1 master stereo panning and then converted to a standard stereo one.".

  Contributing to a Yes measure - on the work plan a stereo mix of a session multitrack 5.1. Right now I'm working around the problem by setting up projects stereo and then bus within this project - a mono for the C bus, stereo for LR and then a stereo bus DSL. It is not ideal, but it works. This implementation of the bus for the outputs discrete also works for me if I brought to dial in for example a multi-channel space of 8 channels, but what I do have with this method is a master fader (and meters) for the whole of the bus.

  "Also in the Surround panner, you can activate the destination off by clicking in the C. Ls and Rs boxes so that the letters light up blue white inxtead." "The Pan then moves only outputs through the normal stereo field"

  Yes, I played with it for a while but the control is not the same - it is complicated by the presence of RADIUS, angle etc, so you know exactly what she is doing in comparison to simple pan pot from left to the right balance. I understand the same thing could theoretically be achieved, but I find it needlessly tedious to do what can be done with a pot of pan.

  See you soon