PERC drivers does not

Similar Questions

• Satellite P300D-15O - display drivers does not-XP/Vista

  Hi all

  After buying this Satellite P300D-15O tried several times the reinstallation of operating systems: Windows XP Pro, Windows Vista x 32 and x 64 version, but does not display drivers offered by Toshiba downloads: it runs only the Windows standard vga drivers after you have installed and not working drivers for AMD/ATI HD3470.

  Max resolution is 1152 x 864. The laptop has been pre-installed with Vista Home Premium and good work and resolution of 1440 x 900 ATI drivers; but I want a new installation on my own without any addition of pre-installed software from McAfee/Google etc - The Toshiba telephone Customer Service can't help for this problem, they have NO answer, :(! Is there a solution with the inf files? Can anyone help!

  THX, endo

  Hello

  In my opinion, make you a huge mistake. Laptop with factory settings is perfect set up and all hardware components are working properly. OK, I understand you don't want to use some additional preinstalled software, but you must understand that you don't have to do it.

  I have absolutely the same option about it than you and the first thing I did with my Satellite P200D is to remove all the software, I don't want to have installed on the system.

  You can do the same thing. Go to the control panel > programs and features and then remove all the additional software. Later, install your favorite software and be happy with it.
  I do the same thing. Why install OS Vista own especially if you ve already paid for a Vista license.

  What do you think of this?

• 15 - p245sa: USB drivers does not not for the 15-p245sa

  Hello

  I recently put on windows 7 (downgraded from windows 8)

  All right, except that the USB is not working... No USB is detected or is even turned on.

  At first he could not update the driver by itself so I downloaded driver HP chipset and installed and now its labelled as:

  Mobile 5th generation Intel (r) Core USB Controller xHCI - 9CB1

  However, it made no difference and still make the USB does not work.

  Here is the hardware ID:

  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2293103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2293103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03

  compatible and ID.

  PCI\VEN_8086 & DEV_9CB1 & REV_03
  PCI\VEN_8086 & DEV_9CB1
  PCI\VEN_8086 & CC_0C0330
  PCI\VEN_8086 & CC_0C03
  PCI\VEN_8086
  PCI\CC_0C0330
  PCI\CC_0C03

  In the general tab, under device status, he said:

  No drivers are installed for this device.

  I'll look at the bios now, any other ideas?

  Thank you

  You are the very welcome.

  You need the driver for this device...

  Software and driver Broadcom Bluetooth 4.0

  File name: sp66402.exe

• Ocean Optics LabVIEW 8.2 drivers does not not with USB2000

  Hi all

  I've recently started working with the USB2000 in LabVIEW 8.5.1. I downloaded the drivers from instrument driver page of NOR and tried to install and run.  When I did this, an error message pops up saying that these drivers were designed to LabVIEW 9. If someone has had this problem and nobody knows how to fix?

  Thank you

  Rob

  You have established in your first post that someone does not have the correct project on the web site. Expect NEITHER correct or simply make and post the project in the download thread convert.

• DV7 - 6160ca usb 3 drivers does not

  So I did a fresh install of windows 7 on this laptop and the whole left side usb does not work and I can't get the usb3 drivers to load. I downloaded several different drivers on the website and none worked. The laptop has only four days.

  I found the drivers it's amd usb drivers 3. I never knew they did some lol. learn something new ever day. Would be nice if hp in the list of drivers in the title of the 6160ca driver page. Driver that worked for me was http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5098215&swItem=ob-97269-1&prodNameId=5098217&swEnvOID=4058&swLang=13&taskId=135&mode=4&idx=3

  My wireless was also broadcom who also wasn't on the list

  Thanks for your help.

• Fingerprint reader drivers does not not on HP DV6 7060SF

  Hello

  I had to change my hd recently and I installed an SSD in my laptop. I also had to install W7 and I lost all my drivers and original software.

  I was able to get most of HP, but do not have the drivers for the fingerprint reader. The installation always stop. Maybe I forgot to install something before, or maybe I did it wrong.

  Can someone help me please?

  Thank you

  YD

  Hello YoungDreamer,

  Welcome to the HP Forums!

  I understand that you are looking for the pilot of fingerprints for the computer, because the fingerprint reader does not work. I can certainly help you! Choose a driver to download and install, based on the operating system of your computer:

  Windows 8, 8.1 - fingerprints of validity sensor driver

  Windows 7 - fingerprints of validity sensor driver

  After that the driver will install and this should solve the problem, restart the computer. If it is not, please let me know the operating system of the computer. Thank you and have a great day!

  Mario

• Pavilion dv6-6c53cl: dvd player not working not not after restoring - all missing drivers, does not appear in Device Manager

  Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box.  The dvd drive no longer works.  When you put a CD, you can hear him swirling but the screen does not open.  In addition, in the Device Manager section, dvd is not listed.  I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).

  I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it.  Clearly, I don't know enough about computers.

  In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that.  Obviously not used often.

  You can provide any help would be greatly appreciated.  The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little.  The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist).  Thank you!

  You may consider replacing the internal DVD player or using an external DVD burner.

• Audio drivers does not work after the upgrade to Windows 7 on Windows 8? Try this!

  If you're having audio problems with Windows 8 does not, I would recommend reinstalling the drivers from the swsetup folder. I've seen this work with some laptops, but your results may vary.

  1. go to your C:\ folder and search for "swsetup" and select this.

  2. once in this folder, find the folder "drivers" and select the "audio" folder

  3. once in the folder audio, we are looking for the file "setup.exe".

  4. select it and run it. Once completed, restart the computer.

  I hope this helps!

• HP G6 2240-sh gpu drivers does not properly

  Dear HP,

  I bought a HP Pavilion G6 - 2240sh C6C63EA 3 months ago. I am quite satisfied with the performance of every day, but I always had problems with the display drivers. I have Windows 8 X 64 pro and a Windows X 64 pro also 8.1.

  First I used it with Windows 8 with the latest drivers, which was available December 2013. Then I formatted my HARD drive (after a nasty virus) and clean then installed Windows 8.1 X 64 pro, so that the latest operating system. Since then, I have problems.

  There is no problem with the Intel HD4000, but the Radeon 7670 m did not work properly. I tried several drivers on the HP support site, the most recent is: AMD HD 1020-1022.

  When I pass any application (with a right click on graphics cards to office/switch) to use the Radeon it hangs or does simply not. VLC crashes always, Wolf Among Us does not even start.

  With the Intel card everything works, games included. My system says every time you start upward: "driver load.mm has just stopped working" (, so the there is a problem with the Radeon driver).

  I got fed up with this, formatted my HARD drive and then reinstalled Windows X 64 pro 8.1. Now, the system does not display this error: "load.mm driver has stopped working", however still applications do not work. It's the same as it was. But when I want to install the latest graphics driver Intel high definition (HD) it says: 'this machine does not meet the minimum requirements. I installed the latest .net also, but the error is the same.

  I found a guide here in this forum. I need to install the drivers in a specific way:

  1 Intel Chipset Installation Utility and driver, then restart

  2 Intel Management Engine Interface (MEI), then reboot,

  3. high-definition (HD) Intel Graphics Driver

  but at this point, I'm working in the same problem: "this machine does not meet the minimum requirements.

  In the Device Manager the Intel HD 4000 driver is present and functional.

  After that, I installed the Radeon driver. At startup, there is no problem, but when I go to use the radeon card of the problem previously. For example: VLC crashes, the games do not work.

  In summary: I normally use the intel VGA, but I can't use my Radeon card.

  After that, I tried the same process with Windows 8 X 64 pro, but the problem is the same. I even used former official HP Intel vga drivers, the message is the same: 'this machine does not meet the minimum requirements.

  I even tried the latest generic Intel driver. After you change manually the driver in Device Manager, driver setup intel a run and after a reboot the driver intel worked properly. However the Radeon driver still did not work. I can't even install a gereneric official AMD driver.

  Please help me to solve my problem. I am full of ideas. I would like to play games and watch movies BD with my Radeon card, but it does nothing like it.

  Thank you very much for your answer.

  However, I was able to solve the problem. I formatted the HARD drive again then install Windows 8 x 64 pro, then chipset inf, intel mei, then driver intel vga (he couldn't install again). After that, I installed all the drivers for windows 8 HP 2240sh and installed all windows updates. After each driver installation, I restarted the computer.

  Now it seems that everything is fine with my Radeon card, can I use it with games, video players and all, load.mm problem does not appear. The Intel card is also correct. Media Center is present in the Panel Intel and work (9.17.10.2849).

  The reason that I don't know, since I have tried to use these two drivers (what driver versions are different):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111605-1&CC=Hu&DLC=Hu&LC=Hu&OS=4132&product=5319684&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124655-1&CC=Hu&DLC=Hu&LC=Hu&OS=4158&product=5319684&sw_lang=

  Windows Update didn't download driver Intel (only realtek and synaptics)... This is strange.

  Best regards

  PS: I uninstalled the Radeon drivers, restarted the computer then used the tool that that you pointed out. He installed the generic AMD driver and it worked, but I could not switch graphics cards because the menu doesn't show after right click on the desktop. So I uninstalled, then used the official HP driver which works very well now.

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Canon MG5220 printer drivers does not not with Windows 8

  I have a Canon MG5220, who does not work with my newly purchased Windows 8 Lenovo Ultrabook.  I called Canon and after some things that they checked, they have advised that I need a similar driver from Microsoft that will work for my Windows 8 to use the Canon.  Help, please.

  I have a Canon MG5220, who does not work with my newly purchased Windows 8 Lenovo Ultrabook.  I called Canon and after some things that they checked, they have advised that I need a similar driver from Microsoft that will work for my Windows 8 to use the Canon.  Help, please.

  Canon either supports their device under a given operating system, or they don't.  Microsoft is not responsible for providing drivers for hardware does not manufacturer or support in any other way.  Who has always (will probably always) fell to those who have actually made, sell and take charge the device in all directions.
   
  Then...
   
  Technical support Canon followed their script or lied or had no script or knowledge of the subject at hand.
   
  Canon PIXMA MG5220 )<-- link="" to="" the="" canon="" support="" page="" for="" said="" device)="" has="" downloadable="" drivers="" and="" such="" for="" windows="" 8="" (32-bit="" and="" 64-bit)="" available. ="" download="" and="" install="">
   
  Now - I suppose it's possible that you have Windows RT?  It is also supported under RT according to Canon.
  http://www.USA.Canon.com/Cusa/consumer/standard_display/Windows
  The score for RT, "for devices running Windows RT, the Inbox printer driver will be installed by Plug and Play. Canon Inkjet Print Utility & Easy-Photo Print will be downloaded for free at the store Windows. »

• U330 Windows 7 drivers does not work

  Hello

  I was recently in the process of updating all my drivers on my u330-2267EU for the latest versions of Windows 7. I was waiting for this update on the site of drivers for a while since I was able to get Windows 7 installed before Oct. 22 release. I'm running Windows 7 64 bit and I'm running into some trouble with these latest drivers doesn't work does not correctly.

  (Using Win 7 64 - bit Versions) U330 driver download site: http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16

  Switchable Graphics: there are 2 new Windows 7 drivers related to the video I downloaded. One referring to the ATI graphics card discrete address and the other to the Intel Graphics Media Accelerator. After installing these two, for switchable graphics BIOS setting and run the switchable graphics program from the desktop after startup, the menu desired with the ability to switch the GPU to gpu performance of energy saving. When I click on the button "gpu high performance ', the screen flickers and fades to black momentarily as it should, but when the screen comes back and then wait for a few minutes, no switch, it just stays in the powersaving gpu. Suggestions?

  Power management software: I also downloaded Energy Management Windows 7 Lenovo driver for the u330. After installing the software, I was initially able to bring up the menu to change power options, but the options I chose would not involve no apparent change. After you install the program, it actually, my screen unable to change its brightness using the 'function + arrow' key combination. Also, more is when I change my windows default power supply options she adjusts the brightness of my screen. It remains just the same no matter what. The only way that I can now change my display brightness is by going to the Intel GMA graphics settings and change the settings there, but it's a completely horrible way to have to do that.

  So now that you have it, after all this waiting I have always to use switchable graphics, or properly use the Lenovo power management software. Oh yes, and I can not adjust the brightness of my screen. I have re-uploaded and re-installed the drivers several times to try to make them work correctly, but so far no luck.

  I would greatly appreciate any help on the subject or at least have the knowledge that someone at Lenovo noticed these problems and a fix will be available soon

  Thank you!

  see our thread here

  http://forums.Lenovo.com/T5/Windows-7-launch/U330-Windows-7-drivers-problem-amp-solutions/TD-p/16716...

• Character animator error AIF/OpenGL. Update drivers does not. With the help of Intel HD 3000.

  What should I do? I have my drivers up to date with the latest versions of 2015 and I still get the problem as soon as I click a puppet (which of course does not show). Is this in relation to my video card?

  I run Windows 7 Edition home premium SP1, Intel Core i7 2.2 GHz, 8 GB of Ram, Nvidia GeForce 610 M 2 GB video card. Record video adapter in the image.

  I fixed it!

  So, you make the default memory Nvidia GPU.

  To do this, go to your desktop and right click anywhere on it.

  Select 'Nvidia Control Panel' and you will be prompted with this window (Yes, it's in Italian, just look at the buttons)

  

  Then, go to 'Program settings' and click on the Add button. Choose Animation character from the list and click Ok or whatever your button on your right at the bottom.

  Then:

  1. you will see that the host of character is selected.

  2. now select the bar below "Nvidia processor high performance.

  Last important thing: press on apply on the bottom right.

  You should be good to go now!

  IF THE CONTROL PANEL GIVES YOU THE ERROR "ACCESS DENIED":

  1. If you are using a laptop computer, go here

  Driver GeForce Hotfix 353.00

  Choose the 32-bit version or 64-bit, download the drivers and install them.

  2. If you are using a desktop computer, go here

  NVIDIA - Drivers download

  and do the same thing

  It could be that these versions are older than what you have installed, but they do not give the issue "access denied."

  It is everything I could find and it works for me, character animator goes perfectly.

• HP Officejet Pro 6700 Premium: 12.34 FOR OFFICE JET 6700 DRIVERS does not WORK WITH MACOS SIERRA

  I guess that the file 12.34 driver does not work with MacOS Sierra, it is impossible to save a file when scan you a document. Instead of file name, you can see "prefix" and in all cases, it is impossible to save any version of the document, does not illuminate on the button "Save". Do you have a solution to risolve without using the Web server?

  Hello

  Follow these steps to solve this:

  http://support.HP.com/us-en/document/c05270318

  Kind regards

  Shlomi

• Windows 7 home premium error AMD drivers does not or not installed Radeon 7670 m

  Error every time I start, with the following text - AMD drivers are not installed or that they do not work. We checked for repairs andupdates but it comes back.

  What happened when you tried to install the driver package I linked to?

  If this fails, you can try using AMD uninstallation utility to remove the existing software and then try installing the driver that I linked again.

  Let me know what happens.