Performance and memory problem

Similar Questions

• Profile of Performance and memory

  Hi, guys

  Trying to analysis the data of my profile to the profile of Performance and memory.

  When I check the data for VI times, I found there are same screws with different time of VI, whatever that means

  Why I cela it is because I will add model pulse for my VI, so I need to know the relationship between my all instruments and time, I'm on the right track

  Thank you

  It seems that the calendar had a resolution of 15.6 ms, which I think is common on some flavors of the Windows operating system.  Note that the average time on some of these screws is equal to zero.  This suggessts that time for many tracks 1878, was probably recorded as zero and some were 15.6 ms.

  It's one of the limitations of the Profiler.

  Lynn

• Toshiba A50-frequency of 106:FSB Bus and memory problem

  Hello
  I have a problem with my new Toshiba A50-106. There are Celeron M 1, 5 GHz inside. That all specifications for this processor FSB speed should be 4x100MHz and for my memory bus speed should be 2 x 133, but when I check in SiSoft Sandra 2004 I see 4x187MHz (748 MHz) FSB and the speed of the Bus of Mem 2x249MHz (4 98 MHz). I can't fix it myself, because there is no such option in the BIOS and there is no standard software from Toshiba.
  Consequence of this is the problem of the temperature of my cpu. It is on average 54 c in an idle state.
  Perhaps you have had the same problem or knows what is in him and you can help me.
  What is a temperature average of your Celeron M?

  Thank you in advance,
  Michael

  Hi michael,.

  to your first question, have you run Sandra 2004 in battery mode because in battery mode CPU manages to set the speed of the FSB and memory also bus speed!

  So, try once more on AC power mode and let me know the results.

  Also, you should check these results with different bechmarking systems because these programs work differently.

  @ temperature problem: there is problem o with 54 HP. The home page of intel, said a 125 C is the maximum and then the CPU stops automatically!

  Rudi Bye

• New PPr upgrade and memory problems now

  I upgraded my version of PPr CC 2015 20 days ago and I went back to make a project that I had previously worked on and made more than 3 weeks. Now, it will not be made and the computer is just running out of memory and encoding is abandoned. I am on Windows 7 with a 2 years old i7 processor and have been able to use the first Pro CC 2015 without problem until the upgrade to the latest version that came out about 20 days ago. Are there bugs that are being developed here? Thanks for any info. I had the project made out by removing all effects to make sure it was a memory problem and quite sure the file render out with effects off the coast. However, I could make with effects on before this update.

  Thanks for you response Brian.

  Can you remove the effects of light and then give it a shot? Effects of light seem to be common with those who have reported this problem.

  Thank you

  Regalo

• C++ = > LV: array, pointer and memory problem

  Hello

  To research and spent a few days on this...

  I have the following function in C++, which returns a pointer(float *) in an array of float, I need to be dumped in a block of code. I created the DLL and I loaded it in the DLL to LV function (everything is ifne I see and I add the parameters) and accordingly implemented the following example. I then had to find a way to get the pointer to work. All the examples use U32, not a float... There is no float * double or type... back... How is it that is managed?

  So I think I'm sort of on the right track by searching and using the example here:

  http://www.NI.com/example/28672/en/

  I'm sure that isn't true, b/c I simulate the DLL code in MSVS and it works perfectly, but when I have the port, the data are bad... but I get size of 4 floats. ALSO... the memory of DLLS don't reset... so if I run it for the first time, it will calculate the data for n = 0 ==> = 1000 n (see photo), but the next run instead of repeat when I press play, data will begin to n = 1000, ==> n = 2000 all I want to do is pass an array of size 3 type of float data our of my DLL , and in labview... race LV and then stops, the memory will NOT keep its value but reset...

  Here's the function, call others, but you can see:

  char * getYawPitchRoll (float Gx, float Gy, float Gz, float Ax, Ay float, float Az, __int32 msTimeStamp)
  {
  char * YPRptr = YPRDEG; SIZE OF 3 FLOATS DATA TABLE
  getYawPitchRollRad (Gx, Gy, Gz, msTimeStamp, Ax, Ay, Az); written in an array (float) of global variable 'YPRDEG '.
  UpdateYPRDEG();
  Return YPRptr;
  }

  Also attached photo of LV code and library settings *.

  Why is it so ridiculous for LV to manage?

  Please help, I'm out of gas here.

  Thank you

  -Peter

  You must change the table Type, then set the table on pointer data in Table Format. I've never had this problem with variables keeping their previous value and my C is a little rusty, so I'm not sure your problem of Globals. If they are initialized on charge then Taki solution should work, even if repeatedly loading and unloading of the dll should not be necessary. Or maybe you could initialize the when you call your main function? MC

• PC freezes and Hardrive memory problems

  I have a hp g62 with windows 7 Home Edition on it

  Sometimes it blocks for awhile and then he unfrezzes then goes over and over again and I need a program to optimize my PC

  next lot of my windows files take a lot of space on my hard drive

  im a gamer and I need to have good performance and memory without it freezing and I had to remove a game 11FR because windows Scott files take a lot of space

  Here is my card and details they are (FORMAT HTML)

  http://sdrv.Ms/Kspugd

  the specification of two files are somewhat the same thing but better to check both

  Thank you

  Well, as a first step, you use two utilities questionable; SlimWare & IObit, if you used either to "optimize" your system or use the driver verifier, who knows what problems you have caused to your system.

  Uninstall both, before using an "undo" option, if programs have such.

  Visit the HP support for your model, then get the correct drivers

  Your C drive has enough free space (238 gb), victory uses 62 GB (which includes your libraries)

  Graphics of your laptop computer may not support some modern games, the game machine to will specify what graphics are needed.

• Memory problems and questions related to the process

  Does this look just for you, because the modified memory does little until after I had computer problems and had to do a factory reset

  The operating system is Windows 7 64-bit edition SP1

  I disabled SuperFetch is told by the way, if this help anyone on this issue.

  Resource monitor

  

  Windows process

  

  Services

  

  

  

  Performance

  

  Hello

  When your computer doesn't have enough memory for all the actions it is trying to perform, Windows and your programs can stop working. To help prevent information loss, Windows will inform you when your computer is low on memory. You can also learn to recognize the signs of low memory and take measures to prevent the problem. Insufficient memory problems occur when your computer is running out of RAM and becomes virtual memory. This can happen when you run more programs that the RAM memory installed on the computer is designed to support. Low-memory problems can also occur when a program free up memory that it needs more. This problem is called memory overuse or a memory leak.

  You can consult the following Microsoft articles and check if it helps.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-AU/Windows7/diagnosing-memory-problems-on-your-computer

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-AU/Windows/preventing-low-memory-problems#1TC=Windows-7

  You may receive an "Out of Memory" error message because of the limitation of in Windows Vista or Windows 7 desktop heap

  http://support.Microsoft.com/kb/947246

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Function of memory in the loop control and Simulation - problem of the ODE Solver

  Hello

  I'm correctly using the control loop & simulation to simulate the behavior of what is essentially a shock absorber-spring-mass system. In the process of change in time (dt) is used to integrate an arbitrary value. I use a rack depending on memory to store the time, to calculate the change of time (dt).

  The simulation is quite complex, because of the precision required, not all the ODE solvers can all support. Currently I use the Adams-Moulton method, this works very well for the simulation. However, it cannot detect the change in time, the change is constantly zero. This problem has auto market by using an another ODE Solver, but then the simulation has been messed up instead (even when I listen to the step sizes and tolerances). So I'm pretty confident that Adams-Moulton is one of solver ODE best suited to the problem at hand.

  Is there another way to store the previous hour and use it calculate lag, that the use of the memory function? Everyone knows about these problems before?

  I did a lot of research of error using the probe, but I'm sure that there is a problem with the ODE Solver and memory function. See the image below, showing basic how is calculated the change in time.

  I'm pretty new to LabVIEW, so if there is something else I missed I would be happy to hear it.

  PS! I set the tolerance minimum step of size/relative and absolute for the Adams-Moulton to simulate the behavior of the system properly.

  Problem solved!

  It turns out that the ODE Solver has struggled because of two "table 2D find" used functions. This was created for the interpolation/extrapolation, which caused a problem constantly and the ODE Solver could not resolve correctly, so the functions of memory doesn't work does not correctly or the other.

  By increasing the table manually, I could use closest method instead, with also good results as interpolation.

• Problems of performance and more recent PPAPI Flash Player free?

  Hello

  I recently noticed some pretty serious performance issues in the latest versions of PPAPI Flash Player in Chrome.

  I use:

  • Windows 7 64 bit
  • Version of chrome 41.0.2272.101 m (64-bit)
  • Flash Player Version PPAPI: 17.0.0.134

  I noticed a sharp decline in performance recently when updating of Chrome, I've been using Away3D 4.1 (using Stage3D) to create a series of generative Art experiments, if you check out the one below that I found in Internet Explorer and Firefox (using the version of the Flash Player NPAPI), the performance of FPS on my system is about 35-40 fps for me , but in drive PPAPI of Chrome, it fell drastically to all about 6 or 7 fps.

  Recently I updated my version of Chrome, so this is a recent change... around a few weeks ago, that this content was working fine in Chrome, around 35-40 fps even I get in other browsers.

  http://Waroo.com/genart9s

  Did anyone else out there see these performance issues with recent versions of the Chrome PPAPI Flash Player?

  That's the good news, thank you for the update.  We work closely with the team of Chrome, and there were corrections of the performance of both sides.  I have to debug it to understand which give, but it is good to know that things are trending in the right direction.  We would certainly reach parity with NPAPI in terms of performance (he has often a trade-off between security and performance), and we will continue to target for earnings opportunities wherever they present themselves.

  Thank you!

• Satellite L500-1z1 - virtual memory problem

  I need help.

  I have switched side bar indicator to see the cpu usage and memory. I noticed that the memory runs at 85%. I was told to put the processor for the four cores. Now, the cpu runs at 0.4% to 23% and the memory usage is always the same. I thought about the formatting of the laptop, but then I lose my operating system and the backup with the laptop is a downgrade.

  I need to know what I should change to operate normally.
  wise on the C drive memory I have 149 gb of which 87.9 GB is free. D I have 148 GB which 131 GB is free.

  the paging file size is 4096 MB for all readers.

  > I need to know what I should change to operate normally.
  Each laptop comes with OS preinstalled and each run normal. Problem is that many people do some experiments and plays with different settings and try, I think, increase the performance of s for laptop.
  Unfortunately sometimes it goes in the wrong direction.

  To be honest I didn t understand the current situation. can you use pre-installed OS or you want to install it using recovery disc HARD option - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm?

• Computer says disk C and F are weak and memory Windows is very low. and I have the same thing in so many programs.

  I have windows xp home edition, he received from a friend. Tells me disk C and F are close to full. Make cleaning disc, but not enough. AND says the window is very low on storage space. Don't know what to delete and keep programs are

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  Read what you and answer a few questions about your system:

  1. What is your current antivirus?

  2.

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

  3. look in disk management, how many partitions? How much free space on each?

  4. optimize your pc:

  Stanley Zhang tips

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• Change username and logout problem - not supported

  When the user switching or disconnection of the screen becomes black and unsupported is in big letters white, it restarts the computer, I start windows normally, then a box just telling me I was expectantly stop and windows will search for a solution, I have 3 users myself as an administrator and two others, if I start it in safe mode, you can switch or disconnect any problems. I uninstalled the last program which had been installed and tried to do a restore of the days different samples about 5 times each time I also unplugged my external hard drive in case that was the problem

  Can anyone help please

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.
   
  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.
  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Go to the all tab and uncheck everything to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Blue screens are caused by defective material or defective hardware drivers.

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post these details here.

  To see if any recent system change caused it

  In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.

   

  Standard hardware troubleshooting

   

   

  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
   
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

   

   

  Dump files

   

  Dump files are files containing the status of the machine when it crashed. We can analyze the file to identify the driver (or program) causing the accident. See the last section on how to get them analyzed by a volunteer.

   

  Analyze dump files

  If you want to analyze your own dump files.

   

  You need start exploring as an administrator to access the files in C:\windows\Minidump. Explore a right click and choose run as administrator.

  
  Download and install the debugging tools for Windows

  http://msdn.Microsoft.com/en-us/Windows/hardware/hh852363

  Install Windows SDK, but simply choose the debugging tools.

  Create a folder called symbols in C:\

  Start Windbg. Menu file - path to the symbol file and enter

  
  SRV * C:\symbols* http://msdl.microsoft.com/download/symbols

   

  Close, and then reopen WinDbg. Menu file - Open Crash Dump

  It will analyze the crashdump. You must close and reopen WinDbg for each analyzed dump file. Because you download symbols from the internet WinDbg seems to be to do nothing. But it's the download. Be patient.

   
  Looking for a driver or a library system that the incident occurred at the end of the list. Find the file, do a right click then Properties - Details tab. If it shows a driver, you will need to update the driver identified. Most of the pilots are in c:\windows\system32\drivers.
   
  Look for the drive for a file.
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type by replacing drivername.sys by the name of the file (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\ drivername.sys/a/s

   
  If it has a file system see if you can get a program to analyze - v.

  Type in the theWinDbg command prompt

   
  ! analyze - v

   

  -v means Verbose and if the accident was created by a program, as opposed to hardware or a driver, it will appear in the middle of the list.

   

  for example

   

  Nom_processus: java.exe

  Nom_image: ntkrnlmp.exe

   

  Nom_processus does not appear in the output of v - analyze and only if a program is from the call that was blamed.

   

  Download them for analysis

   

  Or download files minidump to your Public SkyDrive folder and copy the link in the address bar, and I'm going to do an analysis.

   

  SkyDrive is the download file from Microsoft, Windows Live, at https://skydrive.live.com/site.  Read about it at http://explore.live.com/skydrive.

  If you downloaded one of the Live applications or a web site based Live mail account, you already have access to your Skydrive.

  Put your list of events in the Public folder and copy the link in the address bar.

• Monitor performance and reliability of Vista not updated

  Hi all

  I have a HP Pavilion dv4 Vista SP2 machine is installed. From time to time, I check the performance and reliability of my machine monitor. Recently I discovered that reliability monitor has not been updated since 17/03/2012, while performance monitor is OK. I've used various methods to overcome this problem to delete the contents of the folders PublishedData and stateData evolution of their access permissions. However, no method has been of assistance. I also tested my memory with the Memory Diagnostic tool, and if all goes well no error has been detected.
  When I check the Task Scheduler RacAgent.exe, everything is OK and its State is mentioned as queued. But when I run it, nothing happens and the last Run result shows 0 x 0. Also when I run the command line RacAgent.exe nothing happens. I should mention that a few days ago the RacAgent.exe worked normally and the task manager has also shown its process for about 30 seconds and the field last result run the task scheduler has shown other useful addresses, but even at that time there, I had the same problem: reliability monitor not updated.
  I really need your help and I look forward to your itinerary
  Best regards

  Hey Amir,

  Thanks for asking! Looks like there could be possibly a corruption of system files or an infection. We will check by running the associated scans.

  The auditor of file system (CFS) scanner to check any file system corruption. Follow the article here.

  In addition, run Microsoft Safety Scanner to check any infections. Read this article for the same thing.

  I hope this helps! Don't answer that if they do not help, we can seek other options.

• Big client - vCenter 5.5 response time of the customer Web U1c / questions of Performance and Navigation

  So we're all aware of the issues with vCenter 5.5U1 WebClient and how we are forced to use it to make use of all the features of the v10, vDS 5.5 vHardware (config switch changes the synchronization problems if an emergency change is done on c# client vDS) VSAN only available via the web client, flash, sluggish to questions do not respond the questions and the list goes with the presentation of the menus and hard to navigate, issues SSO (always after 5.5 upgrades)

  So @ VMware vCenter Architecture Team is going to make an effort to hear and give due to the much needed performance improvements and improvements to the user interface before adding more features and SSO type services which majority of clients don't use not and not force it's customers continue to loose faith its vCenter product?

  Looking for answers with options to remove vCenter 5.5 U1c installation as well as a promise to answer to these in vCenter 6.0 version!

  Here is your answer. First of all, to use Chrome as your browser, then you need to go with at least 4vCPU * 32 GB of RAM & adjust the segment size of java for SSO, Tomcat, (TC) Management Server, inventory server and profile based storage to "refine" vCenter device with DB Oracle embedded or external memory. I did, and performance gains went 10 X. This includes the vSAN enabled running clusters. My recommendation that works very well based on design documents:

  vCenter Server inventory	VMware VirtualCenter Management Webservices (tc Server)	The inventory service	(Sps) profile-based storage service
  Large (more than 400 guests or 4000 VMS) stock	4 GB	12 GB	4 GB

  Setting on the vCenter server 5.5 of the memory unit

  • Connect the unit to vCenter server using SSH
  • VI /usr/lib/vmware-vsphere-client/server/wrapper/conf/wrapper.conf configuration file, locate the JVM memory section and change maxmemory to 4096

  Line 66

  # Memory #wrapper.java.initmemory = 512wrapper.java.maxmemory = 4096 JVM

  • /usr/lib/vmware-vpx/inventoryservice/wrapper/conf/wrapper.conf VI configuration file, find the setting. MaxMemory and replace it with 12288

  Line 116

  # Size (in MB) maximum Java heap wrapper.java.maxmemory = 12288

  • VI /usr/lib/vmware-vpx/sps/wrapper/conf/wrapper.conf find the setting. MaxMemory and change from 1024 to 4096

  On line 154

  # Size (in MB) maximum Java heap wrapper.java.maxmemory = 4096

  • Restart the vCenter device w / DB (1000 hosts) external /embedded for lab (100 guests)

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2005086&sliceId=1&docTypeID=DT_KB_1_1&dialogID=294472825&StateID=1%200%20294492358

  Documentation Centre of vSphere 5.5

  PS: vCenter 6.0 has much better performance based on my beta test... so don't lose hope yet. Many improvements to come...

  PS: I've also broken down on this here until I figured this out just recently: Re: big client - vCenter 5.5 response time of the customer Web U1c / questions of Performance and Navigation

• My Firefox exit and gives a "not responding" message once I used Google Mail. I tried to boot into "safe" mode and the problem persists.

  I have a question where Firefox wont ' quit and give a message "not responding" after I've been using Google Mail. It works fine when I'm not using this program. I tried Safe Mode and the problem still happens when I go on Google Mail, so it is not connected with modules, extensions, etc.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.