Performance - Remote PC temperature monitor

Similar Questions

• Satellite A30 and temperature monitoring

  Hi all I am, I was wondering if any of you can recommend a good temperature, monitoring program?

  Hello

  I read that the software of SppedFan should be a good tool.
  In addition, you can also check this page:

  http://www.PassMark.com/products/temperature.htm
  http://home.CFL.RR.com/EAA/ProcessorUtils.htm

  concerning

• Control/monitoring of temperature monitors/clocks CPU/GPU: recommendations?

  Given the need to document and mediation temperatures GPU, especially about GPU NVIDIA with high failure rates, here are 2 programs you can consider using.  All OEM computer customer support is more often limited and unsolved.  We, end-users must increase troubleshoot our own systems, with the help of these programs and with the help of such as this community.

  I ask that users who have had experiences with these products or other programs could give their experiences.

  «HWMonitor is a program that reads the sensors key health systems PC hardware monitoring: voltages, temperatures, fans speed.»   HWMonitor (32-bit & 64-bit versions) is free and it provides only the basics, so it is a little limited in utility.  HWM Pro incurs costs.

  HW is the program that I recently installed.  Thanks to James_Cummins for providing the first link HW.

  http://www.CPUID.com/HWMonitor.php

  "RightMark CPU Clock Utility (RMClock) is a small GUI application designed to time real CPU frequency, throttling and load level adjustment on-the-fly and monitoring CPU performance level on some models of CPU supported through power management model-specific registers (MSRs) transformer." In automatic management mode it continuously monitors the CPU usage level and dynamically adjusts the frequency of the processor, the level of gas and/or voltage according to the needs, realizing the concept of "Performance on Demand." »

  "Basic version RMClock is free for personal and non-commercial use and for non-profit organizations. No registration or activation is necessary.

  Thanks to killaprofile for having recommended RMClock, a program that I have not used.

  http://CPU.RightMark.org/products/RMClock.shtml

  Finally, I will propose this post for tips and tricks article with changes and based on the answers.  I encourage all experienced users here to catalog useful programs or workarounds to the tips section once it are mentioned in the sections of software/hardware/other for these valuable recommendations did not to do buried in this forum moving quickly.

  Thank you.

  ---------------------------------------------------------------------------------------------------------------
  SIG: Pavilion model Series # dv9500t (t = Intel) _CTO_Prod # RL653AV_Vista Ultimate _SP1_Intel (64-bit) 2 Duo CPU T7500_2 GB Ram_BIOS F.09_NVIDIA 8600 M GS_200GB 7200 RPM SATA Dual HD (100GBx2) _HP 300GB HD USB Kit for 2007-xb3000_8
  For chipset temp, nVidia System Monitor, part of nVidia System Tools (no need to install the other two parts of system tools), also works well that's a bit inflated to install compared to HWMonitor.  On the positive side, it can display only what you want above the other windows in the small Panel.  "GPU" is the place for the good temp video integrated chipset or motherboard no matter what the choice is.

• With Toshiba Tecra S3 RAID hard drive temperature monitoring

  I wonder if there is a software (or a tweak for Toshiba RAID Utility/drivers) that would allow the monitoring of the temperature of the HARD drive.

  Utility known as SpeedFan, HDTune etc., I tried, and that work very well at least with IDE drives, either don't notice not the hard drive SATA RAID at all on my Tecra S3, or they can not access the S.M.A.R.T on the temperature information (possibly information can not pass through Toshiba RAID drivers...)

  Thnx for any comments.

  Hello

  I usedEveresthome edition.
  But I am an owner of the laptop with a disk IDE HDD and to tell the truth I don't know if it will support the feature m RAID.

  But you can test it.
  This utility reports the HARD drive and the temperature of the CPU and provides many useful and detailed information on the characteristics of portable equipment.

  I hope it's going to market

• Windows/Microsoft asked PC Optimizer (Tel.No 0441234765093) to call users of Windows to perform remote health checks on the home PC? phone call received today stating that is the case.

  I received a phone call indicating that the person called the PC optimizers. They said that they had requested by Microsoft/Windows of people in an area to perform a health check on domestic Remote Desktop connection as there had been major virus problems in the area of the canvas. They asked check application warning and errors: my computer, manage, application section. They then talked by a procedure of execution for www.support.me to create the link.

  Can you confirm that this is a legitimate operation?

  I run my own COMPUTER business I get out to clients in their own homes.

  I came across this a lot with elderly people taken to the huge amount of money.

  This is a scam and nothing to do with any founded microsoft in the measure of the im aware.

  They take your pc remote access and updates actually spyware / malware on rather than remove it.

  I recommend telling them you have a pc and see how long takes the call.

• Remove a remote host from monitoring Infrastructure

  How can I go about removing a host of infrastructure monitoring?  If the host has its own fglam, I was able to disable the agent simple, remove fglam, etc..  In this case, I see no option to turn off monitoring, or withdraw completely from the remote host monitoring.

  In the screenshot below. Let's say that I simply wanted to see information of the rd-r220-01.  But I always wanted my central collector collect statistics on all remote hosts.

  See you soon,.

  Seth

  If I wanted to stop monitoring of the vmebizjmc of the host, I'll stop the WindowsAgent. In the screenshot you can see other officers running from the host even where a foglight agent Manager is running. I can't stop foglight agent manager.

  

  David Mendoza

• The remote gateway Tuxedo monitoring

  Is it possible to control a Tuxedo domain traffic on a bridge to a remote domain (for example, WebLogic)? If so, would it then possible to say which remote node in a multi-node configuration is selected for a specific service request?
  
  Thank you.

  Hello

  Smoking in itself does not provide for either. On the other hand TSAM provides both. TSAM can monitor traffic to remote domains and a request for follow-up since its introduction until it ends or leaves the Tuxedo environment. In other words, you can follow an application and WTC to the point of the bridge of exciting field, but not what gateway's connection. Now if separate you from your remote connections to separate domain gateways (GWTDOMAIN servers) then you would be able to know which remote WTC instance, the request went to.

  We seek to be able to track the requests to the bottom of WLS and WLS in the tuxedo, but for now TSAM can monitor within one or more areas of Tuxedo.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Performance - remove igdkmd64.sys monitor - its by slowing down the boot process

  Hello

  I am running windows 7 Home premium SP1 64-bit and the monitor above suggests that I try to delete the driver above because it slows down the startup / boot process

  Can someone please suggest easy steps to remove the same and if there are implications for the removal of the driver

  Hello

  What is there to process you followed to remove it... It's actually not a bad file... Its graphic driver Intel. Igdkmd64 sys is the Intel Graphics Kernel Mode Driver for Microsoft Windows 8, Windows 7, Windows Vista, and Windows XP 64 - bit operating systems.

  the igdkmd64.sys file could be the driver Intel Graphics. Have you tried to download the drivers directly from the Intel web site? If this is not the case, try using this link:

  http://www.Intel.com/p/en_US/support/detect

• Still no monitor temperature and no USB boot support

  Hello
  Many users of Toshiba laptops I am disappointed because no CPU temperature monitoring utility, none support USB booting is provided for my laptop.
  It is ridiculous that there is no utility that shows the temperature, the speed of the processor or the functioning of the fan.

  Is there any solutions for this?

  Hello

  1.) If you want to boot form USB you use the floppy drive.
  2.) pre-installed Toshiba Software are responsible for the processor and the cooling performance module.
  Open energy saver, and there you can change some settings. (CPU processing speed, the method of the cooling module)
  3.) Unfortunately, this software does not support any temperature followed :(

• Using resource monitor to connect remotely to another PC

  Hello

  Is it possible to use the resource monitor in Windows 7 and 8 to connect to another Windows computer and know what is happening on it remotely? The monitor has a whole wealth of information that would be useful for troubleshooting other machines.

  Thank you very much

  vnayak

  Hi Vnayak,

  Resource monitor is a tool that allows you to analyze the use of the CPU, disk, network, and memory in real time. You can use the performance tab in the Manager of tasks to see how the CPU of your computer is used by Windows and other programs running on your computer. You cannot use this tool to connect to another machine remotely.

  
  

  However, you can use remote desktop to access other computers remotely and check the Information resource monitor.

  Consult the following link:

  http://Windows.Microsoft.com/en-in/Windows-8/Remote-Desktop-connection-frequently-asked-questions

  Hope this information helps.

• S1900-303 monitoring CPU temperature

  Hello

  I am aware that others have asked similar questions... but are - someone out there who knows if I can monitor the temperature of the CPU on my S1900-303...?

  BIOS (updated Toshiba) give no indication of power management (sensors, etc.) ... I was browsing the web and downloaded several S/W (MBMonitor, MBProbe, SpeedFan etc)... but they do not seem to detect anything!

  According to Intel (got a P4 2 GHz CPU) there is a sensor in the chip.
  Any suggestions/ideas

  Concerning
  Yiannis

  Yiannis salvation,

  Sounds strange! I searched the net and found some interesting links. These sites told me that the CPU on a 1900 Satellite temperature monitoring should be possible, so the problem is that no official statement from Toshiba!

  You wrote that the laptop had detected the probe temperature, so in my opinion, the version of the BIOS disabled this feature! Two suggestions: first of all it must wait for a new update of the BIOS of Toshiba and hoping that the feature is turned on again or secondly take old BIOS and do a downgrade from the BIOS!

  Antoni Bye

• Utility of monitoring temperature CPU - walk-it!

  After long research and tests HW several programs of surveillance, it works! Temperature monitoring on the computers CPU laptops toshiba! Hmonitor v4.2.5.1 to http://hmonitor.com/

  Good luck!

  Hi sauliaus

  Thanks for your information.
  I checked a few comments and it seems that some users want to install the temperature monitoring utility.
  I don't know that this post will help many users.

  Thank you once again ;)
  Good bye

• I have two monitors, I need remote desktop for my computer at home and be able to see two screens on my home computer, how do I do this?

  I have a laptop with a single monitor.

  I need remote desktop for my computer at home and be able to see two screens on my computer at home.

  How do I do that?

  Original title: dual monitor question

  If you look at 'Options' remote desktop and look at the "View" tab there is a checkbox for "use all of my monitors for the remote session.  You may need to be an administrator to set this option.

  Check out these similar posts too.

  http://www.Google.com.au/search?q=remote+desktop+dual+monitor&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = WgtJUKLeH6mRiQe834DoAw

• Resource monitor Windows vs performance vCetner tab

  We looked at the CPU and memory on a virtual computer by using the built in Windows resource as well as the performance of vCetner tab monitor and data do not seem to be compatible. This morning for example resource monitor showed 30 second outbreak of the CPU at 100% but if I do a CPU view of this time in vCenter for CPU performance area, it does not appear there. Is one accuarate more than the other?

  Performance in vCenter tables vary in collecting periods and rollups. I think that they breakdown as follows:

  Real time = 20 seconds

  = Every 5 minutes per day

  Each week = every 30 minutes

  Every month = every 120 minutes

  = Every year every 24 hours

  Looks like you might be getting caught up between rollups. It is better if you look at the performance troubleshooting guide and see if that helps you. This is a great doc and thus covers esxtop.

• New HP PAvilion DV7 temperature reach 70 degrees

  Hi guys,.

  Need help. I just bought my HP Pavilion Dv7 last Saturday.

  When I bought the shop, I've checked everything. and it seems ok.

  When I come home, I noticed very hot temperature and fan noise sound like it accelerates.

  then I installed temperature monitoring applications. It shows cpu temp is around 60-68 degrees during the inactivity and the use of 68 to 75 when heavy (install apps). is this normal? Help, please

  I need to know that information, so I could find the appropriate plug at Intel.

  The specifications of the processor to the Intel state that Tjunction is 100 c. which means 70 c is nothing to worry about.

  If all goes well, there will be a BIOS that will change the performance of the fans to run a little cooler. Just keep an eye on the BIOS updates are available and read what the improvements are before the update.

  What is the usual temperature where you use Notepad?