The remote gateway Tuxedo monitoring

Similar Questions

• RV082 VPN gateway to gateway does not solve remote gateway DynDns

  I have two RV082 is connected. Each has a dynamic IP address (generally changes every few weeks). I have configured tunnels on both ends with a local and remote "Remote/Local Security Gateway Type" of "+ IP dynamic authentication with domain name".

  If I look at the State of the VPN tunnel summary, it shows the IP "mondomaine.dyndns.org 0.0.0.0" under the column heading "Remote Gateway". The button "Connect" Tunnel test is n/a.

  I can solve each mondomaine.dyndns.org on both sides of each VPN entry using the Diagnostic DNS search within each router. If I wired a fixed IP address for the Local and the remote gateway, everything works fine. VPN is good.

  I can't seem to get the "mondomaine.dyndns.org" function works. It seems that the router is unable to solve the dynamic IP address of the domain names on each of the routers.

  I am confused, but this is my first time using a Cisco VPN router. Thanks in advance for some ideas.

  Hello MtnSledder,

  You can use only address dynamic IP + domain name (FQDN) of one side of the tunnel. On the other device try to select IP and then the possibility of using the IP by DNS resolved.  You will find this under the remote gateway once you select IP only.

  Give that a try and it must raise the tunnel.

  Christopher Ebert

  Network support - Cisco Small Business Support Center Engineer

• where we get Networkid, Accepoint on the remote control, local to the tuxedo Server

  Hi xu he
  
  We had the Client Code written in c language, his work when sending messages from Tuxedo
  He was earlier developed by others. Now we must develop with Jca adapter, for those who we need
  Networkid and Accepoint of the remote and the local, please suggest me where I
  Can get this information to the existing code, I got the Tuxedo of the remote computer Server Code and client code to the c language
  
  \tuxedo (main folder)
  -Ben
  -include
  -inventory
  JRE-
  -lib
  -regional settings
  -udataobj
  -uninstaler
  -registry.xml
  -set.env
  
  I need to use these DM_LOCAL_DOMAINS, DM_TDOMAIN, DM_REMOTE_DOMAINS, DM_LOCAL_SERVICES.
  in the configuration of the jca adapter, where can I get this information to the code existed, please suggest me.
  
  Thank you & & best regards
  Olivier

  Hi Olivier,.

  You have described the structure of the directory is the Tuxedo installation directory. What you are looking for is the application directory where are the application configuration files. If the application has already been configured to use the gateway of the field, there will be a file containing configuration areas. If you have configured the environment application (TUXCONFIG, TUXDIR, DMCONFIG, variable of environment, etc.), you can use the dmunloadcf command to get a text representation of the areas configuration copy if you can't find the original source for it. Which will contain all the information of domain configuration you must configure the JCA adapter.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Portege R500: unable to connect the remote DVI monitor via Dynadock

  Hello

  I just connected Dynadock (DVI) with my Portege R500. The cell would be supported - according to Toshiba - but my experience confirms that Dynadock is not able to access the DVI ports. This implies, that Dynadock is nothing more than the USB HUB.

  My setup: Vista 32 company b (CZE edition), the latest patches, Toshiba R500.

  Software: latest dynadock software 2.3 c.

  Symptom: I can't connect to the remote DVI monitor via the dynadock, there are only two external panels with 800 x 600, but Vista does not allow me to choose.

  More information: software Dynadock requires to run without Microsoft Defender, otherwise it blocks the service: DisplayLinkService; file:C:\Program Files\DisplayLink base Software\DisplayLinkService.exe
  If you turn off the MSDef, the "error 2738" message appears when you connect the dynadock and when Vista tries to install a missing drivers for you.
  Yes, I know the VBS question and the problem is not caused by VisualBasic - VBS "Hello World" runs.

  If you think always, Toshiba Dynadock is compatible with Toshiba R500, then press Fn + F5 and look at your logs and you should find something like:
  In English: igfxext.exe throws an exception 0xc000000d, offset 0x0000f9f8.

  I look forward to the comments, advice etc. If you are able to transmit this bug report to a responsible engineer, do please.

  Hello Leo

  As far as I know, Toshiba has not designed for laptops models own only Dynadock and it can be used on every laptop or fixed. Because of this, I think that this statement about model of care is not so important for this problem.

  Toshiba provides devices and software. To connect using the USB port, and these ports must each computer or laptop. I hope that you have installed the software by following the on-screen instructions (device of should not be connected to the start-up of the plant).

  Is your Portege docked the host or you have connected Dynadock directly in Portege s USB port?

• How can I activate the remote computer to power saving Mode monitor?

  I am a technician in a small private company and it is my duty to keep all desktop computers works very well.
  Desktop computers:

  • are the Dell Optiplex GX260
  • Run Windows XP SP3
  • have Dell 17 "monitors
  • with Intel Pentium 4 (2.4 Ghz) processor with 1 GB RAM

  I do my job after working hours. I connect to them with my laptop (running Windows 7) and check their conditions, one by one. Now, my employer comes to know that when I do this whole process monitors for desktop computers continue to run. As it is not put in place a very large company and electricity and the price of fuel in Pakistan are very high. So, he asked me to find a way to turn the monitors to the power saving mode, when I do my work. In this way, it will be significant energy savings and fund savings in monthly bills. So, can someone please tell me How do I turn on monitor of the remote computer to the power saving mode?

  There are several ways to handle this.

  #1-have affected the power turn on their monitors, but let run PC
  #2-click Start > Control Panel > Power Options and choose how long it is before the screen turns off. Once your activity on their machine is complete, then will kick time.
  #3-you say that you connect to their machines to check their conditions... whatever that means exactly. You can map their computer management console directly to your machine and I * think * he didn't wake up the monitor.

  I hope this helps.

• Internet access from the default remote gateway? NO SPLIT TUNNELING

  I am facing a problem for a long time, I have an ASA5505 I went through a lot of config and research until I got the inside interface to be able to go to the internet; However my VPN clients are unable to go to the Internet. Now, here's the network config:

  -J' have a router (which is a modem and a router and an AP) 3 in 1... This router is connected to the ISP with a coaxial cable. the Interior is 192.168.0.0/24 network.

  -L'ASA is connected to rotate inside the network of its ' outside the interface.

  -L' SAA within the 192.168.1.0/24 network is a configured static gateway already (which is the router) outside the int > default gateway 192.168.0.1 (which is the internal IP address of the router).

  -Inside the ASA computers are able to connect to Web sites (but I can't do anything outside the network of CMD PING)!

  -When a VPN cleint to connect using IPsec (without certificate) by using a Cisco VPN client software, the client can ping and do the remote desktop connection with computers on the same within the network (192.168.1.0/24) but can not pass the Internet even know that other computers on the network can go to the internet.

  -One of the computers on the network (the inside network) is a DC server 2008 R2 which can go to the internet, as I mentioned above.

  What I'm trying to do is have the VPN clients to be able to go to the internet with the help of which the ASA inside the NETWORK card as a default gateway (192.168.1.1), I already have the VPN configuration with the name of the group, preshared key, user name and password and without the split tunneling (which is what I want)

  Thank you

  Hello

  The most common problem by getting ICMP to work through the ASA failed ACL or the ICMP Inspection rules.

  Check your configurations of current ' policy-map ' on the SAA with the command

  See the race policy-map

  I assume you have the default configurations 'policy-map' on the SAA, that are attached to the global

  Under ' policy-map ' configurations, you should see several 'inspect' commands. Pass under the correct configuration mode (where the current commands are found) and add the following

  inspect the icmp

  inspect the icmp error

  Then retest the ICMP through firewall.

  In regards to the VPN Internet traffic, we would need to know the level of Software ASA which you can check with the command 'show version'

  You must first verify that you have this command

  permit same-security-traffic intra-interface

  This will allow the traffic to the VPN users access the interface ' outside ' of the ASA, get PATed and then leave again through the ' outside ' interface. Without the command above it will not work. Will never go the VPN Internet user traffic through the interface "inside" of your ASA.

  Then, you will also need the dynamic configuration PAT for your VPN users, so they are translated at the same IP address that users of LAN behind the ASA. This format of configuration depends on the software level, that I mentioned above

  On a SAA running 8.2 (or below) you would usually have this configuration

  Global 1 interface (outside)

  nat (inside) 1 0.0.0.0 0.0.0.0 (or the mentioned specifically LAN)

  To activate the dynamic PAT for VPN users that you would add

  NAT (outside) 1

  On one ASA 8.3 running (and above) you can configure the dynamic PAT for users of VPN in the following way

  network of the VPN-PAT object

  subnet

  dynamic NAT interface (outdoors, outdoor)

  It should be. Of course, you could have a configuration that may replace it, but I doubt it.

  Hope this helps

  -Jouni

• "The remote server returned an error: (502) Bad Gateway" while matching Protected Site VC and recovery Site VC in VMware SRM

  Hi all

  I am trying to Setup VMware SRM 4.1 groups. I had configured hitachi usp vm storage based array replication in both sites.

  Now when I try to pair the two sites vCenter, I get an error at the end of the phase of matching as message "the remote server returned an error: (502) Bad Gateway ' on the protected site. But surprisingly, I am able to match both the vCenters on the recovering site.

  Please help me to get the problem.

  Thanks in advance,

  Sanjeev

  Run telnet server vCenter/SRM protected site to the recovering site server vCenter/SRM:

  Telnet IP_ADDRESS 80

  Telnet IP_ADDRESS 443

  You succeed?

• monitor the remote JVM to a web application

  I have a web application hosted by tomcat. Any application is hosted on the server. Can I follow JVM's behavior through my system?

  Follow the following steps
  If you have access to the server only

  Step 1: define the suite JAVA_OPTS in file catalina.bat tomcat/bin
  JAVA_OPTS = - Dcom.sun.management.jmxremote = true - Dcom.sun.management.jmxremote.port = 7091 - Dcom.sun.management.jmxremote.ssl = false - Dcom.sun.management.jmxremote.authenticate = false

  Step 2: Redeploy application

  Step 3: open JRMC marks a new connection. Give the Ip address of the server where tomcat is deployed and jmx port 7091.

  you will be connected to the remote JVM hosting the application

• RDP in the remote computer works for only 1 of the 2 local machines almost identical

  I have a laptop and desktop at home, and I'm eager to distance in my work machine. The laptop can RDP into my machine to work very well, but I was not able to understand why my office cannot. I was even able to RDP in my work from my office machine in the past (a few months ago), but now he can't. Here is the error message I get on the desktop after the RDP authentication will fail; the laptop can connect correctly by using the same credentials.

  

  Both are running Windows 7 Ultimate 64 bits.

  Both use supplied with windows Remote Desktop connection application.

  Both access to the internet via a wireless connection (the desktop equipped with a wireless adapter computer) connected to the same router.

  Both are fully updated with updates of Windows and run the same antivirus.

  The two successfully connect to a VPN software that connects very well and uses the same network as my work computer credentials.

  Both must connect using the same login information, which are the same login information that I use at work.

  On the desktop, I tried and failed with the following text:

  Disabling the Antivirus and Windows Firewall.

  Copy and run the RDP file saved to the laptop on the desk.

  Reinstalling the VPN software on the desktop.

  The only difference between the two that I can think is that my office does not require a password to connect; but it doesn't stop me of remoting in the working computer in the past, and my computer configuration has changed very little since then.

  What else can check to figure out what could be allowing the laptop through, but deny the Office? Any help is appreciated, because I prefer to use my home office instead (two monitors, better equipment, etc.).

  I was able to find a workaround for this problem, well that is not ideal. It seems that my work computer and desktop home somehow at some point got the same network IP address (192.168.1.106, at least by trying to connect to my work machine). Even if not connected via VPN software, they both have the same network IP address. That's why I was able to connect to another computer on the network, but not my machine specific work; My Home Office thought he needed to connect to itself. So what I was for my home desktop to have a different network IP address. my laptop has had a (192.168.1.3) which differed from the work machine.

  What I did to work around that it was:

  On my desktop, I opened the command prompt and run the ipconfig command and writes down the subnet mask and the default gateway of my wireless connection for use in later steps.

  I then roughly followed the steps of this (somewhat similar to Windows 7) site to modify the IPv4 settings to change from automatic to manual IP address assignment. Set it to manual and back (i.e. reset) has not worked for me and has given rise to the same network IP address. So, using the values of the ipconfig I ran earlier, I chose a random network IP (192.168.1.42) address, left the settings to manual assignment and find other info. For DNS servers, I use Google's Public DNS.

  The end result looks like the following and I am able to connect to my work from my home office machine.

  

  EDIT:

  After a little more work and looking around, I could cancel the settings above (thus leaving my office with the default settings) and solve the problem of logging in my router settings and my office assign an IP network (192.168.1.42) using its MAC address. As long as I don't have to RDP into a computer to work with the IP address assigned, it will work very well.

  I would mark this as the answer but do not see how.

• Channel disconnected error with the remote server

  I created the Mobile Flex and PHP project that works very well with a local server (MAMP on Mac). Basically, it reads the data to get MySQL and displays the map Google. Now, I'm moving from a local server to a remote server.

  But when I run my application on emulater, I get the error "channel disconnected - disconnected prior to receipt of the acknowledgement of receipt."

  I Googled what this error is and found a web site that described on this error. According to the web site, the error is probably due to a PHP syntax error and use Network Monitor to debug it.

  However, the problem is that after I activated the network monitor and run my application on the emulator, nothing appears on the monitor network. My first question is if I should use Network Monitor to debug this error of channel disconnectef? The second question is negative, how can I debug this error? Any help would be appreciated.

  I finally understood what I was doing wrong. I followed the insturction of davidflexto http://forums.adobe.com/thread/875709 and didn't I have to set host = 'localhost:8889' in my php that connects to my remote mysql server. It's delicate sicen is remote server, you set host = your domain name, but that's not true. Like davidflex said you need to set host = ' local: 8889 "since your gateway.php is also running on the remote server.

  I fell for several weeks and hope that someone else get stuck like I did it for several weeks.

• Able to interact with a Panel before the remote cRIO to a computer, but not another

  I have a cRIO application that publishes a remote façade for the monitoring and control of the application. A PC (Win7 & firefox), I can see, interact and control the cRIO through published remote façade. A second PC, also Win7, I can see and monitor the status of the cRIO, but no interaction does not control remote that opens and it's true that I use IE, FF or Chrome as a browser. When a PC is connected to the cRIO, via a dedicated Ethernet connection and only the cRIO and PC are on this network. For this private network of two devices, the PC is always the address 192.168.1.1 while the cRIO always use 192.168.84.199 (port 8000).

  The rules of firewall on both computers are configured to allow all inbound and outbound programs/ports/protocols to be used between these two IP addresses.

  Two PC's have development systems LabVIEW to update installed on it (which more or less guarantees that they have the minimum requirement LV of execution necessary to see and use a remote façade).

  What may be different on the PC who discovers, but cannot interact with the remote control?

  Right-click on the second, and then select "take control of this VI.

  As far I know - that a viewer of the remote façade can control the frame at any time - the rest cannot display.

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Unable to ping the remote host IP address

  I have a home network with 2 desktop computers, printer, TV and BlueRay attached.  The PC is both XP and members of the same workgroup.  I can't get the connectivity between the PC 2.  With 1 PC, I ping successfully all connected devices, with the exception of 2 PC.  2 PC, I ping equipment successfully connected, including 1 PC...  I get the same information using a different router and a different network on 2 PC card.

  I tried the following steps of the Article 314067:

  1. check on two PC's TCP/IP configuration.  Result: good on both PCs.

  2. use the ping tool to test connectivity.

  • Ping the loopback address.  Result: good on both PC
  • Ping to the IP address of the local computer.  Result: good on both PC
  • Ping the IP address of the default gateway.  Result: good on both PCs.
  • Ping to the IP address of the remote host.  Result: bad on PC 1, good on PC 2
  • Ping other IP addresses on the network.  Result: good on both PCs.
  • Ping the host name of the other PC.  Result: bad on PC 1, good on PC 2

  Article:

  If the ping command fails, the remote host may not be responding, or there may be a problem with the hardware of network between computers. To the rule

  on a remote host does not respond, use Ping again to a different remote host.

  If you cannot use Ping successfully at any time, verify the following configurations:

  1. Make sure that the IP address of the local computer is valid and that it is correct on the

  Tab general of the Internet Protocol (TCP/IP) properties dialog or box when it is used with the Ipconfig tool.  Result: good on both PC

  Make sure that the default gateway is configured and that the link between the host and the default gateway works. For the purposes of troubleshooting, make sure that this gateway by default is configured. You can configure multiple default gateways, gateways after the first gateway is used only if the IP stack determines that the original gateway is not working. Diagnosis is to determine the State of the first configured gateway. Therefore, you can delete all the other gateways to simplify your task.  Result: good on both PC
  Make sure that Internet Protocol security (IPSec) is not enabled. According to the IPSec policy, Ping packets may be blocked or may require security. For more information about IPSec, go to method 7: Verify Internet Protocol security (IPSec).  Result: good on both PC

  Thanks for your suggestions you may have.

  Hello

  Firewall such as Norton, McAfee etc can cause a loss of network connectivity, even when the network is correctly configured. Try disabling the firewall on both computers to see if the ping works.

  Tricky

• Connection to the remote computer problems

  Have XP Pro on work and home computers. Monitoring the windows XP start using remote desktop info. Computer work defined as host, trying to connect remote, after putting in the name of the computer to work, I get "unknown parameter was specified in the computer name field.  How can I connect to my work computer?

  Hi Raider2118,

  · What is the work computer protected by password?

  · Is the work computer have to plan together?

  When you connect to another computer using Remote Desktop connection when you specify ComputerName/console in the computer box, and then you click Connect note ComputerName is the name of the remote computer to which you want to connect.

  To get the name of the computer navigate to the location below:

  a. Click Start, right click my computer

  b. click Properties

  c. Select the computer name tab

  If you have tried the steps above and then temporarily disable the security software on the computer and then try to connect to the computer and check the results.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• To find the details of connection of the remote user to my computer

  I want to know who is connected to my office using the Remote Desktop feature in Windows XP / Vista / windows &. is there a system where Windows saves the remote user connection logs

  Hi Roger,

  Remote Desktop connection is a technology that allows you to sit at a computer (sometimes called the client computer) and connect to a remote computer (called the host computer) in a different location.

  If someone wants to connect to your computer, you need to enable remote desktop on the computer.

  For more information, see the links.

  Connect to another computer using Remote Desktop connection

  Remote Desktop connection: frequently asked questions

  If you suspect an infection of malicious software on your computer, see the link.

  How to stimulate your defence of malware and protect your PC

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Event Viewer is a snap Microsoft Management Console (MMC) that allows you to browse and manage event logs. It is an indispensable tool for the operation of systems for monitoring and resolution of problems when they arise.

  For more information, see the link.

  http://TechNet.Microsoft.com/en-us/library/cc766042 (WS.10) .aspx

  Please update us with the results and we will be happy to help you.