Resource monitor Windows vs performance vCetner tab

Similar Questions

• Windows resource monitor shows only a CPU core when he should have four.

  Windows 7 Home Premium 64-bit, SP1
  Intel Core i3 2330 m-hyperthreading

  Resource monitor normally indicates two nuclei and Hyperthreaded (a total of four graphs) when seen on the tab CPU recently single core (one graph) is displayed. This change is caused by one of the updates of Windows or an indicator of a hardware problem? Is there a recommended KB or a patch that solves it?

  original title: change of resource monitor (?)

  You asked: "what version of Windows 7 do you have?" ... Home Premium x 64, SP1 as indicated at the beginning of my first post.

  As my screen name, incurably curious, says I couldn't let it go. Assistance in the meantime, I searched tirelessly and found a cure. I had to make a change through msconfig. I don't have any idea how the settings have been changed because no one else is using this machine.  [????] (Microsoft Security Essentials and Malwarebytes returns own scans; so I doubt that the cause is associated malware.) The following explains what I've done and the results.

  1. I went into msconfig > startup > advanced options and find the number of processors, set one. The arrow to expand a menu drop-down has also shown that a single processor. Which did not make sense because my processor Intel Core i3 2330 M's two core with hyperthreading.
  2. I unchecked the box and restart the computer.
  3. I returned the number of processors as described in #1 above. Expand the menu gave me the choice of 1, 2, 3 or 4 processors. I chose two and checked the box.
  4. I rebooted the computer again.
  5. I checked the monitor of resources (via the Task Manager) and found multiple graphics, I'm used to the display. The graphics are labeled: Service use of the CPU, CPU 0, 1 parked CPU 2 CPU and CPU3 parked.
  6. Parked CPU1 and CPU3 parked show no activity, which is expected. These show only activity when hyperthreading is active, which is rare with the programs I run. Only programs written specifically to hyperthreading use the feature.
  7. CPU utilization service CPU2 and CPU0 show activity as expected.
  8. Manager tasks shows four graphs still now.

  The reason why I know not what to expect is that I have upgraded RAM and completed cooling there are a few months and one of my tools use resource monitor to control the computer. (I used other means to monitor the internal temperature). I managed to run enough programs to use more than 7 GB, the 8 GB available RAM and CPU usage Dungeon in the range of 75 to 100% for more than an hour during trials. Hyperthreading (CPU1 and CPU3) clearly indicated to be active too. Time CPU ran in the range 165F without additional cooling and order of 125-130 with additional cooling.

  I will wait for return of the answers with explanations and/or questions until I got this mark as resolved.

• SFC/scannow stuck at 70 percent and I get the message "Windows Resource Protection could not perform the requested operation".

  Original title: whenever I run SFC/scannow I get to 70 percent and I get the message "Windows Resource Protection could not perform the requested operation". How can I fix this problem and complete the scan?

  Please answer with repair options and details on where to go to get there.

  If safe mode can't complete, it can be continuous malware (run malwarebytes) so clean, you will probably have to run a repair installation.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• Empty resource under fontsize monitor window > 100%

  Hello

  I have Win 7, NVIDIA GeForce 7025. All updates to date.

  After the recent updates, resource monitor shows just a blank window when I run the display under a textsize > 100%. When I change to 100%, everything is ok.

  I think that this behavior is not allowed.

  Any suggestions? Any correction?

  Thank you!

  TH

  Hi Erich,

  Welcome to the Microsoft Community Forum.

  I suggest you follow the steps by roodolpt responded on January 4, 2011 in the below mentioned link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-7-resource-monitor-not-working-no-data/bf2b3275-E543-4f68-982B-af6695fc3d3d

  I hope this helps. Write to us for assistance.

• Resource monitor shows Windows 7 and Windows Vista running different programs

  I followed my programs and other at quite a bit lately since my system hangs and is running more slowly.  I'm trying to understand what might be causing this. I only had Windows 7 loaded on this desktop computer, as I bought it.  However, today I noticed that in the resource monitor to the title of the CPU that Windows 7 is the context of the operating system for some programs and Windows Vista is the context of operating system for other programs (including programs based Apple).  Is this a problem? Could it be added to some of my slowness and crashes?

  This indicates the operating system, the program has been designed to target. If the application does not specify this in its manifesto, it is assigned to a context of Vista. This has been added in Windows 7 that allows new applications to benefit from new features, while older applications continue to work on the former.

  http://social.technet.Microsoft.com/forums/Windows/en-us/cc0740eb-B06A-41a6-98e6-088529bf1f10/what-does-operating-system-context-mean?Forum=w8itprogeneral

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/dd371711.aspx

• Sfc/scannow error: Windows Resource Protection could not perform requested operation

  Hello

  I'm having a problem. All of my windows files are corrupted. When I changed the theme, it's always the basic theme of load. I don't know why. Maybe it's because I never have it patched with Universal Theme Patcher. I know that this will change the windows file, and windows he refused. I'm sorry windows.
  So I want to make a repair. I ran everything. When I ran the system restore, it is said that the antivirus blocked the system restore. I have search on this site, but there is no help. I take the Startup Repair, nothing changes. So my last hope is run cmd and type sfc/scannow.
  And then cmd stop the scan and says Windows Resource Protection could not perform requested operation. I'm looking for help on this site, I have nothing. I did not help
  Please help me. I don't want to reinstall my Windows. Any ideas are welcome. But when no one can help me, what should do?

  Hello

  Method 1:

  a. Click Start, type services.msc in the start search bar and press ENTER.
  b. Locate the Volume Shadow Copy service.
  c. click cliché instant volume, then select restart.
  d. now make a right-click Volume shadow copy, and then select Properties.
  e., under Startup type, select automatic.

   

  Method 2:

  Check your hard drive for errors.

  Follow the below mentioned article:
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• When you try to run the SFC/scannow I get the following message: Windows Resource Protection could not perform a requested operation.

  When you try to run Fsc/scannow I get the following message: Windows Resource Protection could not perform a requested operation. Can anyone help?

  Original title: problems with Windows Live Update

  You run it from a (run as administrator) command prompt?

  SC Tom

• Windows 7 performance issue when he out of the idle situation

  For all the last months when I start windows it will work fine, all programs, IE, as long as I continue to use the computer.

  If I'm away from the computer for an hour or two when I get back to Windows it cannot find all the programs, e-mail,

  Task Manager and even IE cannot stop him, I have to use the power button / stop. Then when I reboot and Windows

  same cycle load all over again.

  I ran Malwarebytes, Combo Fix, an assortment of rootkits even reinstalled Windows nothing helped.

  Anyone have any ideas?

  Thank you, Alan

  Original title: Windows 7 run before oneself times

  Alan

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select Task Manager, performance, resource monitor tab and tab memory. What are the numbers for reserved equipment, in use, modification, sleep and free?

  Is your Windows 7 32-bit or 64-bit? The amount of RAM is installed?

  

• Maximum frequency in resource monitor

  In Task Manager, Performance tab, button resource monitor, which is the "percentage of the maximum frequency" and is related to the Turbo Boost?

  I have a 3.4 GHz quad-core i7 with Windows 7 64 bit.  The percentage of the maximum frequency is usually 103%, but sometimes it's 102 or 101.  I downloaded an Intel program that displays the status of the Turbo Boost.  I had all four cores running, so the Turbo Boost was 3.5.  The Max Freq 103%, and being about 103 percent of the 3.4 3.5, I think that showed the Turbo Boost.  But I ended up some processes, the Turbo Boost has increased, but this percentage is not gone - in fact, he came down.  So, what's the percentage of frequency and is related to the Turbo Boost?

  Hello

  You can not push beyond a certain point and some variance is scheduled. Check with
  Intel, documentation and community support. It's really a hardware problem and
  not directly related to Windows so that you ask the right questions however in the wrong
  places. A person fully familiar with your processor and your hardware can give you
  examples of what results you can expect.

  Intel TurbBoost FAQ
  http://www.Intel.com/support/processors/sb/CS-029908.htm

  Intel mode
  http://www.Intel.com/content/www/us/en/architecture-and-technology/turbo-boost/turbo-boost-technology.html

  Intel communities
  http://www.Intel.com/content/www/us/en/blogs-communities-social.html

  Technology Intel mode monitor
  http://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=19105

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Using resource monitor to connect remotely to another PC

  Hello

  Is it possible to use the resource monitor in Windows 7 and 8 to connect to another Windows computer and know what is happening on it remotely? The monitor has a whole wealth of information that would be useful for troubleshooting other machines.

  Thank you very much

  vnayak

  Hi Vnayak,

  Resource monitor is a tool that allows you to analyze the use of the CPU, disk, network, and memory in real time. You can use the performance tab in the Manager of tasks to see how the CPU of your computer is used by Windows and other programs running on your computer. You cannot use this tool to connect to another machine remotely.

  
  

  However, you can use remote desktop to access other computers remotely and check the Information resource monitor.

  Consult the following link:

  http://Windows.Microsoft.com/en-in/Windows-8/Remote-Desktop-connection-frequently-asked-questions

  Hope this information helps.

• When Firefox is running, IP addresses much appear in the resource monitor to the Win7 taskbar including 93.184.215.73 - that could be malicious. How can I block it?

  I noticed a slowdown sometimes in Firefox - checked the Windows 7 Task Manager resource monitor and found a lot of IP addresses - if open only one window of Firefox. So I checked their - most looks legit, but this one certainly has a bad reputation of computer forums: 93.184.215.73. What I want to know is one) how he block in Firefox? It is easy in Internet Explorer. You block just under the protection of personal information and security tabs. (b) why Firefox even running this?
  Thank you.
  M in Oakland

  Moreover, all that promises a free video download or conversion is potentially suspect in my book. As another experiment, you can disable these extensions for a day and see how that affects your traffic. You can do this on the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, when in doubt, turn off.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Note the differences?

• _ "Boot Performance Monitoring" and "stop Performance Monitoring. __

  I just looked to the top of the page "Event Viewer" and discovered 1 791 itemsmarked as 'endangered', 'Critical', 'Error', etc, etc, etc.!
  They seem to be linked to "Boot Performance Monitoring" and "Stop Performance Monitoring", etc., etc., etc..!
  How can I fix all of these issues, please?
  I have a little trouble with my home computer private.
  Whenever I turn on my PC, it takes a long time to start (is that what you call "Booting"?).
  Also, when I want to turn my PC off, it takes a long time to close.
  I tried a few computer maintenance such as: -.
  CLEANING DISC,
  THE FRAGMENTATION OF THE DISK,
  etc.,.
  but they have not alleviated the problems at all.
  Can someone help me with this please?
  Any assistance, information, suggestions, etc. would be greatly appreciated.
  Thanks !
  
  Alan Merrington
  E-mail address is removed from the privacy *.

  Hello

  Normally how long will it take to start a power off of the State? How long does take for
  Stop for a shutdown of the State?

  Use this simple free utility to read these events and it makes it easier to paste them into one
  message here. Do these after the SFC and CheckDisk as below.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ==========================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  Keep these practice to check possible error messages if they return.

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• sfc/scannow CBS. Corruption, resource monitor error LOG does not, the Preview picture broken, KB2538223 do not install, optional updates IE 10 and 11 unsuccessful.

  I just fixed a major problem I had with a screensaver HBO hogging all my resources. I had to reboot and when it would take place within 2 hours. Now, after cleaning and tweaking, this installation is only a few weeks and I am having some problems.

  1 CBS.log has some corrupted files after doing a sfc/scannow.

  2 resource Monitor works properly and will not load properly not display anything without error message.

  3 image preview does not work on my photos for the thumbnails and will crash after the use of native Photo Viewer after about 5 pictures in the same directory leafing.

  4. Windows Update will not be installed "Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243).

  5. then Windows Explorer 10 and 11 will not be installed and the optional updates that tend to bother me even though I know that I don't need them. But also say that they have failed after that reboot although says that she is successful in the history of Windows Update.

  MOD, do not hesitate to break up of my questions on the correct forums, I want to be like Windows stock as possbile.

  Hello

  Follow this link http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/resource-monitor-not-working/5b471988-ead8-47c7-9078-45ac3aa0c981

  At latest