Permission to connect ACS 4.1
Hello
We installed the new ACS 4.1 device. Its fine for all newspapers but newspapers for work permit do not come. I made the necessary configuration in the AAA clients. If anyone can help with that. I need to upgrade the application?
Pls suggest...!
Update and install with the latest patches available in cisco. It will work. Update 4.1.1 bulid 23.
Tags: Cisco Security
Similar Questions
-
Permission denied: connect
My BB10 Dev Alpha "debugtoken" has expired and the previous blackberry debugtokenrequest fails.
Just a minor inconvenience.
Here is the command and the error-
C:\Program Files (x 86) \Research in Motion\BlackBerry 10 SDK WebWorks 1.0.1.17\de
pendencies\tools\bin > blackberry-debugtokenrequest - storepass xxxxx - devicepi
xxxxxx No. debugtoken.bar
Error: Permission denied: connectI have not changed my - storepass, or ma - devicepin, to the best of my knowledge.
My signature keys are always in place.
I rebooted the device DevAlpha. Wow, that's still slower than Windows!
I can still transfer files to and from the device.
But I press 'Remove the Debug token' Silly me!
I can't remember or find that "use development Mode should be turned on or OFF, so I tried both.
All ideas welcome!
Thank you
Solved!
Using the graphical help of Blackberry Tablet OS
-
Hello
How to disable AutoComplete for username and password on the page to connect ACS 5.3 GUI? I have watched with in the Administration of the system GUI pages for example Sessions and can't find how to turn it off.
Y at - it a CLI command I can run?
Thank you
Stuart.
Try to update to patch 5.3.0.40.7
Resolved questions in ACS 5.3.0.40.7 rollup
CSCub40498 : the password in ACS 5.3 field has enabled auto operation.
-
Error of the client vSphere ESXi "you don't have permission to connect to the server.
Team,
I get the following error when I try to connect to the ESXi box with vSphere Client.
"You don't have permission to connect to the server.
Thank you
John
This is due to lockdown mode is activated on the ESXi host, connect using locking DCUI mode and turn off and try.
-
Set of permission controls Shell ACS 4.1 - configuration of VLAN
I'm looking to limit some users to VLANs, they set on the switch ports. I have configured the custom of "switchport" the following:
deny access vlan 11
allow access vlan 10
allow access vlan 13
allow access vlan 40
allow access vlan 50
allow access vlan 60
allow access vlan 101But it is allowing to the ' switchport access vlan 11 ' to be a viable command in this group. I have "not allow unparalleled args" checked and I have the game of 'Unmatched orders' to refuse. It's as if the part 'switchport access' is the acknowledgement, but the rest is ignored. Can you put only one argument by command? If this is the case, I tried to add a "vlan" command and also limit in the same way to deny 11 and leave the rest, but that did not work.
Since you already have "unparalleled commads' set to REFUSE and"allowed unparalleled args"is the uncheceked that you don't need explicit" deny access vlan 11 "." Can you withdraw from there and try again.
In case it does not, please obtain the following information:
Debug aaa authentic
Debug of the aaa authorization
debugging Ganymede
Connect GBA > reports and activities > Ganymede administration > check what is the format of the command to come here.
Kind regards
Jatin kone
* Make the rate of useful messages *.
-
VMware VC 5.5 first issue of permission to connect, please help
Also, vsphere 5.1 from the SSO is required to connect.
In vSPhere 5.1 it is administrator@system-domain
5.5 the user name is: [email protected]
PLEASE CONSIDER the ASSIGNMENT any USEFUL or GOOD answer. Thank you!!
-
Limited permission problem control ACS 3.2
I'm trying to implement a command authorization set allowing a group to set up and change the loopback interfaces, but any other interface. Currently, once I have to configure, I can't limit what interface they can change. It's either full configure access or none.
I implemented the command set like this:
-unmatched orders = deny
-allow the unmatched arguments is DISABLED in both cases
Configure
terminal licence
Interface
allow ^ loopback
AAA server Ganymede group + tsg1
Server x.x.x.x
!
AAA authentication login default group Ganymede +.
AAA authentication login vty group tsg1
the AAA authentication enable default
AAA authorization exec default group tsg1
AAA authorization exec vtyauth group tsg1
AAA authorization commands default Ganymede group 0 +.
AAA authorization commands by default 1 group Ganymede +.
AAA authorization commands by default 15 group Ganymede +.
AAA - the id of the joint session
RADIUS-server host x.x.x.x
RADIUS-server timeout 20
RADIUS-server application made
RADIUS-server labrat1 key
RADIUS server authorization allowed missing Type of service
Is could someone please tell me what I'm missing?
Works of "... aaa authorization commands. "only on the commands in exec mode. Once you're in config mode, this authorization has no effect and the user will be able to do anything.
Add the following command to activate also the authorization for the config mode commands:
AAA authorization config-commands
and you should be good to go.
-
Permission to connect from page to page or menu to the menu
Hi all
I'm trying to creaet a permision site based and I'm trying to wrap my head around how to do it using Flex. I could be over thinking this, but either I deal through this outlet and see what I get.
I google and Im get lots of how-to creation script alogin which is fine, but it is not exactly what I'm looking for.
My question is, after a successful login, how does use of user credentials to access the other parts of the application in flex?
Lets try an example: dating site.
User, with successful logon quickly gets access to others or the pages. Most these days dating sites use PHP and probably using 'sessions' to control the authentication of the user throughout the websit.
question I guess is, I have to create the whole application in an application may be using view state control access) or can I create several application and use authentication contorl full page access?
is there a better way to do this?
any help you can give me would be greatly appreciated.
see you soon
There are many ways to architect this in your application, but one thing that might be common to several of these options is to have the notion of roles assigned to users.
If you have information about your users in a database, and each user has one or more of the roles assigned to them.
According to user roles, you can allow access to different areas of your application based on roles.
So now you need to decide how your application to allow access by the role of the architect.
Don't use States to do this, better use ViewStack and if there are multiple views in your application, that uses many typical user will not need to see, modules to reduce the size of the original SWF file.
http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=navigators_3.html
http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=modular_2.html
If this post answers your question or assistance, please mark it as such.
Greg Lafrance - Flex 2 and 3 certified ACE
www.ChikaraDev.com
Flex / development, training, AIR and Support Services
-
Web Services connection permission
I developed an application for my 8300 with software v 4.5
It consumes web services as a customer.
Every time that the application tries to consume the web service presents a new screen asking user permission to connect to the destination IP address.
How can I avoid this application for my application runs continuously?
Thank you
Antonio
Otherwise, this could be the standard BlackBerry screen "Firewall/Permissions" checking connection.
There is a checkbox "ask once" at the bottom of the dialog box asking the question? Try to check that.
If it is the Application of permissions, then you have a range of options including:
(a) that the user addresses and use the option "ask once"
option (b) use the "Set Permissions" to download time during the installation of Over The Air
(c) set the permissions of Applications via the BES for this application (assuming that you are pushing it the BES)
(d) set the permissions on the device - Options--> Advanced--> Applications--> change permissions
(e) programmatically in your Application
Look around here this forum for other users who have asked similar questions.
-
Dear Sir
I plan to connect my ACS server to external database (oracle 10g) for making this deal would please let me know how I would be able to connect ACS to oracle. It is significant that I read a document from Cisco on this case, but there are still some problems. I would be happy if you let me know your comments.
Kind regards
Hamza younes
To connect ACS Oracle database server click external user database > database Config > external ODBC database and mention the server running Oracle. The following link can help you
http://www.Cisco.com/en/us/products/ps8543/prod_troubleshooting_guide_chapter09186a00808e7d1d.html
-
Cannot connect to content content/URL/default
About once a month, I get a PopUp stating the following:
Printer software update available
Because HP values your privacy, we would like to ask permission to connect to the Internet for this quick update.
It then lists a privacy notice and then asks if I want to continue.
When I click on 'YES', after a few seconds, I get the following message:
Cannot connect to content content/URL/default.
I have two printers connected to my desktop of Windows 8
(1) photosmart C7180 is network connected
(2) photosmart 5510 connected to the wireless network
I do not know which printer the PopUp's from East does not identify a printer.
This has happened for the last 3 or 4 months.
Does anyone have an idea what to do with this error
jhaiar,
Welcome to the HP Forum.
You can control the schedule on these applications update - even turn off checks altogether.
Once your stable printing software / installed, you don't need raises unless you like around.
The software is from one of the few locations of remote server - the errror is probably a mistake to match missed server. If the error condition is traceable to your side, the evidence may be in your Event Viewer logs.
You have the option of checking / downloading the software to print manually at any time.
There are a lot of additional information available at the website of the printer: manuals, documents How - to's, troubleshooting help and others. You might like to your favorites of the reference sites.
HP Photosmart C7180 all-in-one printer drivers
Photosmart HP 5510 e - All - in - One Printer - B111a drivers
Click on the Thumbs-Up Kudos to testify and say thank you.
Although I strive to reflect best practices of HP, I do not work for HP.
When the answer is a good patch or solution to your Question, click accept as Solution !
-
How remote in computer at home without needing permission?
I setup the remote control from my laptop to my desktop, but the question is he asked permission that must be accepted before I can access the computer that I am trying to distance but if I'm out of the House, at work, and that no one is at home, how can I accept it is a password or something that can be used to access my remote computer without having to get permission from connect?
* original title - connect remotely without getting allowed *.
Use teamviewer and give him a predefined password. Then you will not have to change all the time
-
Not remote desktop connection to use saved credentials
Even if I clicked on "Edit" and put in my credentials Windows 7 Remote Desktop connection not automatically uses it.
The checkbox 'always ask for credentials' is NOT checked.
When I connect to other Windows clients on the target computer even their saved credentials are used properly.
Is this a bug of Windows 7 Desktop connection remote or I do something wrong?Hi Rawsome,
Thanks for posting of ' Getting Ready for Windows 7»
Here is an excerpt from a remote help desk and how to make the article can help see the process as it is activated.
To connect to a remote computer that computer must be turned on, it must have a network connection, Remote Desktop must be enabled and you must have access to the network to the remote computer (this could be through the Internet), and you must have permission to connect. For permission to connect, you must be on the list of users.
Have you tried to change the settings of the remote computer?
1. Open Desktop connection remote by clicking Start , all programs, Accessoriesand then clicking Remote Desktop connection.
2. Before connecting, click Options, and then make the changes you want in the display of local resources, programs, experienceand Advanced tabs.
NoteTo save these settings for future connections, on the general tab, click Save. 3. Click connect.
Please let us know if this helps you or if assistance is needed.
Debbie
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Want to access another computer on Windows 7 using Remote Desktop connection
Dear member of the community,
I have 2 desktops, one with 10 windows and more with windows 7. Now I want remote access to the computer windows 10 windows 7 without logging on the computer windows 10. Kindly, guide me for the same thing.
Hello Alice,.
I would like to know some information about the problem so that we can help you better.
The computers are connected to a domain network?
Thank you for details on the issue.
I also appreciate that fact that you want to access 10 Windows in Windows 7 remotely.
With Remote Desktop connection, you can connect to a computer running Windows from another computer running Windows that is connected to the same network or to the Internet. For example, you can use all of the programs, files, and network resources from your computer on your computer at home, and it's just that you are sitting in front of your computer at work.
To connect to a remote computer that computer must be turned on, it must have a network connection, Remote Desktop must be enabled and you must have access to the network to the remote computer (this could be through the Internet), and you must have permission to connect. To obtain permission to connect, you must be on the list of users. Before you start a connection, it's a good idea to search the name of the computer you are connecting to and to make sure that Remote Desktop connections are allowed through the firewall.
I suggest you use the steps in this article and check if it helps.
Reference:
Connect to another computer using Remote Desktop connection
https://support.Microsoft.com/en-us/help/17463/Windows-7-connect-to-another-computer-remote-desktop-connectionI hope this information helps.
Please let us know if you need more help.
Thank you
-
Problems with 9000 device establishing a socket connection?
Edit again: still a problem, see Update 2 to end...
My app works fine on 4.3 & 4.5, device and Simulator. Also works very well in the 4.6 Simulator. However, on the bold new we just acquired today, I can't do the blackberry establish a socket connection. As far as I can tell a call to Connector.open which has the form:
String connUrl = "socket://
: ;deviceside=true";StreamConnection sc = (StreamConnection) Connector.open(connUrl); .. will never return! I set breakpoints after him in the file and I get nothing. There is no sign of a connection through to the other end. I put a breakpoint on the line with Connector.open so I know is to be worn, but if I click on 'no more' control is never returned to the jde debugger.
I realize in Application 4.6 permissions have been moved around, but I've set manually the application has permission to connect to the internet. I tried to connect to a server, I know that the blackberry can access (e.g. www.google.com), I expect this to cause then an exception more than my application is obviously not HTTP... but nothing! No indication the Connector.open never call does not return. No exception seems also to be thrown, ControlledAccessException or other... can someone guess what might be happening here? It seems that it is a fundamental thing to do, I don't see what could have changed. My thread Manager program is still running behind all that (I see his messages to regular use of ram) isn't as all users of the application are overwritten or anything.
My request is signed, I checked several times. I can also access the internet as usual from the blackberry browser. It is also interesting to note that, on the debugger to connect to the device, told me debugging information are missing about two - net_rim_cldc and net_rim_os modules if I remember correctly. Then, he said because of this "many debugging features will not work properly", but as far as I can see, willing or not, debug this connection is simply not be established, and yet no exception or anything is up. The above code is surrounded by try/catch that will catch java.io.IOExceptions and ControlledAccessExceptions, among others, but none of this code is already hit. And surely if it was some type of more exotic exception that I have no intention, I would like to at least get a popup on the screen tell me about an uncaught exception?
Help would be greatly appreciated!
UPDATE: standard Version, as soon as I had finished my half hour trying to get this thing to work and then wrote a post about the epic forum, he begins to work. Perfectly as I can tell. I guess it could have been a little temporary bad service from my supplier... Oh well anyway we are all good now...
UPDATE 2: it appears when wifi connections aren't a problem, but if I turn off wifi problem remains. Any ideas?
How long did you wait for an exception? It must expire after 2 minutes if it is unable to connect. Which way you make the connection? You use the deviceside parameter?
The BlackBerry has been activated on a BlackBerry Enterprise Server? You have completed the information under Options, Advanced Options, TCP APN? The BlackBerry shows 3G on the home screen (capital G)?
Maybe you are looking for
-
Requirement of password "you have to change your unlock iPhone code access in 52 minutes.»
My father is very upset and frustrated, and so I am. I hope that we can be compensated in some way (but probably not). My father unlocked his iPhone 5 as usual, then he got a notification on the home screen that says "password requirement you need to
-
Hi, I have a dx2450 which has a m2n68 mobo - with a 4450B processor that I want to spend, can someone help me with who's the best, I heard it was the Phenom 9600, but also read that someone had put a 9750, but before I buy it I know for deffinet, tha
-
How to control the number of cycles?
I am a new user and I would like to ask a question. I use this VI (which is attached) and I want to control the number of cycles of the generated wave (sine, Triangle, saw tooth place). How can I change the VI to do this? Best regards Michael
-
Inspiron 15 7537 can not see windows 8.1 update
Just not windows 8.1 update in the store. I installed all windows updates, so don't tell me that. I check any FAQ 8.1 windows but does not work. I can't update the PC to windows 8.1?
-
How to open the maintenance Manager to change the printer ink
How to open the maintenance Manager to change the printer ink