Photon: Rattle of camera

Similar Questions

• My IpadAir camera button is no longer a component noise rattling

  My IpadAir camera button does a shutter clicking when you take pictures.  Can I fix this?

  Swipe up from the bottom of the screen to control galloping. Tap the bell icon until it becomes black. Then try the camera again.

• x 51 r2 came with a noise of rattling GPU.

  I looked through many messages here, but I only see people talking noise from the CPU fan, which looks OK in my case. Since the first time that I turn it on, the GPU rattles. It's worse when I started a game. The video should be clear enough. Can someone take a look and offer a solution? Thank you! [View:www.youtube.com/watch]

  It sounds like a cable is disconnected by the fan. Power off, unplug the power cable, remove the GPU cage. Look under where would the fan on the video card. Try to move them from the road. Make sure that the video card is secure in the cage, then replace all. Turn on. Re-test.

• 7 Top rattle phone iPhone

  It seems to be a rattle abnormally strong from my iPhone brand new 7.  I know a certain level of it's normal, but it of boring dish, tapping the screen to tap or tap apps what anyone in the upper third of the screen of the phone has this rattle.  I followed the rattle and can only conclude that sound of the camera, the reason why I upgraded to this phone in the first place.

  Is this normal (and absurd) or something I should take in?

  Hello

  I noticed the same thing on my iPhone more than 7.

  IF I tap the top of the phone or the base around the home button it vibrates like something loose inside. I moved from samsung note 4 and never had problems like that.

  Seems that other users of iPhone 7 are starting to notice this problem too.

  Response

  Useful (0)

• Q: connecting under "Load" only photon

  On my previous smartphone Motorola International, XPRT (MB612) there were FOUR options when it is connected to a computer:

  • Motorola phone portal
  
  
  
  • Windows Media Sync
  
  
  
  • USB mass storage
  
  
  
  • Load only
  
  

  The Photon q (XT897), only three options are presented...

  • Mass storage
  
  
  
  • Device media (PSG)
  
  
  
  • Camera (PTP)
  
  

  .. .and there seems to be no way for the PQ to be connected via USB to a computer blu - ray player, TV big screen, or any device other than a simple charger just to keep the battery in "normal" mode.

  For example, when it is connected to my Samsung LED LCD flat screen HDMI to view videos or photos, it would be nice to also be able to connect via the USB port to keep the battery charged.

  Instead, immediately on the connection of the devices through the USB port, the PQ dismantles the SD card (where are saved the videos and photos) and mode Mass Storage, Media Device or camera.

  Is anyone aware of any way to have the PQ connected to a computer or other device are not specifically a charger without going the PQ to enter in a special mode and remove the SD card?

  I miss my XPRT "Charge Only" fashion.

• Photon: Ringtone issue Please HELP!

  My father has a motorcycle Photon 4 g the next day it came out and everything was going well until the day one of his contacts called and the default ringtone is out rather than custom it they assign. Made all to remove the battery for a while, the factory reset and also it took to Sprint and they checked it and also a factory reset and none of these things worked, so to the they gave him a new, but the problem persists. Someone now, any difficulty or if Motorola has an update on how to fix it? Just in case, everything is stock. Any help would be grateful.

  
  

• Photon: Dropped calls and network connectivity problems

  I bought my Photon August 18 and he was not long for me first to the problems with network connectivity.

  The phone displays signal on the phone, but when you try to call, send text messages or surf the web. Zilch.

  A soft reset works every time. I've had some experience with the issue of the "appeal of ghosts", but had no network connectivity so often that he was too much a problem. Restores the soft 3-4 per day.

  I took the phone to the Sprint store and they told me that my phone verified and were not hardware problems that may be found. I said at the time on the update of the software of MR5 and was anxious to see how the phone after the update.

  I received the update on Wednesday and the phone worked fine. No appeal of ghost, no network connectivity not problems, only dropped the call.

  Now, Friday morning, I lost network connectivity despite seeing the strength of the signal and had to perform a soft reset to regain connectivity. My wife and I bought this phone at the same time. She had many calls interrupted before the update and we both experienced after that update eventhough signal showing on the phone is at least two if not more bars.

  Is this a known issue? Is it going to be/CAN this be corrected by a software update? Is this phone a lemon and he'll remember?

  I LOVE this phone. I don't want to get rid of it, but...

  Seriously. It's a phone! Making calls should be the FIRST thing that is done right.

  Please, someone, Motorola, reassure me that this isn't a lemon and that network problems are going to be fixed. I CAN wait, but I don't want to get stuck with two phones for $200 that need to be pampered just to be usable.

  Thank you

  TC

  Yes, it turns out that be was a buggy phone. Two stores tested Sprint phone for reception of the signal and they said that it spent; but as said the technician in the second store, the tests they take place the phone in ideal conditions.

  The two stores I've visited, said they were ready to replace the phone, but my first visit came just before the MR5 update software while I was willing to wait to see if the update corrects the problem. It didn't, but the replacement of the second store phone works fine with upgrading to MR5 and really no problem.

  I'll go ahead and mark this question as a response, but if you experience the same problems of chance complete loss of all network connectivity (Sprint or otherwise), I recommend getting the phone replaced. It is a bad camera.

  Oh and the technician at the second store mentioned the network problems. It has been a problem for them, but the most telling proof of the issue of network is random dropped calls. So if from time to time, you lose a call under the conditions of good network signal, it's probably not your phone and Sprint. I have almost that many abandoned calls as of late, so it could have been the wrong phone I had that really amplified the problem... or... Sprint has got some of the bugs in our region.

  Thank you for looking in. I hope that your problems are as easy to solve as mine and I hope that you are still within your 30 days so that you get a new replacement.

  Best wishes

  TC

• Satellite L650 - 10 M product noise rattling sound with delay

  My laptop often produced a noise of rattling sound (on the speaker or the headphones) of any output device audio with a delay of 2 to 3 sec. I don't have this problem all the time, but could not definitely say any time. This problem occurs even when I m running any applications like media player. But during this delay I ve noticed that the hard drive turns at full speed like disk hard led light in my laptop shows. I also noticed that this time varies from time to time sometimes 1 sec sometimes up to 7 sec. I fear that this could be a hardware problem. My laptops warranty ends in this month of July if this problem can be retrieved by warranty, how to explain the problem to the service provider. I have no evidence to produce service provider .only possibility is by recording the incident but that's impossible because as I said no one can expect this problem to a very special moment.

  I tried to reinstall my windows using the recovery media, but I still have the same problem.
  I tried to run memtest and it say s no problem or mistake was there.
  I tried to run the scan disk and Defrag, but there is no error found.

  Before 6 months, I had the same problem but one day it stood for a long period of rattling noise and eventually lead to a blue screen and which marks the end of my disk.at this instance I tried to re install windows using the disc of recovery, but at this time there, an error came out saying disc problem for raid 0 also I can't even connect to my laptop to this time and strucks to with a black screen.i took my laptop for service provider and got my hard drive replaced. Now with the new drive hard the problem still persists.

  How to explain the problem to the service provider?
  suggestions please

  Post edited by: mohdarshad

  Hey Buddy,

  If you run the version preinstalled Windows with all the drivers and Toshiba tools, you should check the utility disk protection tool. I had a similar problem during playback of music and videos, the laptop freezes for 1 or 2 seconds and caused by this tool because disk head has been moved to the safe position.

  You can change the sensitivity of this tool and I chose the lowest value that does not resolve the problem :)

  Check this box!

• Photon counting using the FPGA of the series R. problem generation TTL signals

  Greetings,

  I try to use the R series FPGA to read and count the pulses TTL of a discriminator (count of photons of the Hamamatsu C9744 unit) connected to a PMT (Hamamatsu-H7422P-40). The release of PMT looks fine (signal.png H7422P-40) but the discriminator wasn't able to generate corresponding TTL 5V pulse. There was some scattered and random spikes, but nothing significant. Instead, the only stable the PMT signal is a single + 5V pulse no matter how, I adjusted the PMT (C9744 output.png) control voltage. The PMT and the discriminator is connected by an ordinary BNC cable 50 ohms.

  I am really confused because it was supposed to be a really simple installation. Anyone have a similar question or have similar Instrumentation (but no problem) configuration? Comments/suggestions are greatly appreciated.

  Thank you very much in advance!

  Hi Kelli,

  Thanks for your help. Sorry it took so long to get back to you.

  I actually found the question. The discrimination of the Hamamatsu unit level is set too high that all signals got filtered. After adjustment of the threshold of manuallyt, I was able to get the camera TTL pulses. And 7842R worked correctly for count impulses. Everything works fine now. Thanks again for the input.

• Rattling at startup on Acer 7720

  I posted about it before, but despite the change in power I get it again? To work around the problem, I do a forced reboot and then asks him to load windows normally... .so no problem any ideas? Can you do a test on a test of POST?

  below is the original announcement:

  Convince Folks, can you help me with a problem... I've been using this laptop for some time without problem using windows 7 Ultimate. At the beginning I had problems with the icons when I open a particular program icon I'd get another program?

  So I thought that it is just a mistake and began a reboot... then I had continous ping, but windows starts after 30 to 45 seconds, but with some of the issues previously reported... Then I took the ram and made sure that they were clean and firmly installed and rebooted, but the same issue continues? I then cleaned the system and also checked for viruses, but all came to own. My next step is to Flash the bios and had once again the ping? Puzzled on this I decided to take the laptop to a computer specialist, but took the laptop and not food... when I arrived I went to demonstrate the problem but couldn't? I tried 5 times to shut down and restart and all icons worked with no beep, I couldn't believe it... I took the laptop back at home plugged the power and back came the Bing and errors? IF BY CHANCE it seems to be something to do with food? I leave the laptop a bit run down and then began a reboot... NO rattling? So what - the? any ideas... another .the question I suffer with is when typing the cursor jumps to the top of the window, I type in? also when holding an adventure when you scroll down it immediately jumps back... Its got that me confused! PS: I did a restore to an earlier date and still no go... again I have used this laptop several times before with the same power supply and no problem either!

  Close this thread because it is resolved. And open another thread with your new question/topic. In this case, others can find answers better if they have the same problem. Do not hesitate to give congratulations.

• Xperia Z2 Tapping "rattle".

  Hello guys...

  Basically, when I type to the top right of my back Z2 / or before and also the bottom left, I hear a slight "rattle" or click noise, from the region of camera...

  Ive looked around this topic and a large number of phones do this, apparently, it has to do with the auto focus/camera/lens mechanism? I just want to know if someone of you this experience

  Thank you for your time

  Hi, if you look carefully in the lens the entire thing moves up and down a more optical way to autofocus. This part that makes the endearing loose sound when clinking of tape on the back

  See you soon

• Noise from camera of blackBerry Smartphones

  Anyone know how to disable the camera noise rattling? Its very annoying!

  b

  Download the third-party application called BerryAnnoying.

  It will silence the camera for those times that you shouldn't use it.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• Rattling noise - the graphics card or power supply?

  Hey guys,.

  I've had my HP Pavilion Elite m9300t for almost 1 year now. About half of that time, I had to deal with the annoying rattle noise that I attributed to one of the fans in the case. Unfortunately, my PC is equipped with GeForce 9500GS formidable card (with the black cover) and so noise, while annoying, is not surprising. The rattling noise has been stronger and more widespread during initialize and not significantly lower over time.

  But now I have an another problem and I'm not sure if the two are related. Now, the sounds rattling calms down (no noise whatsoever) and in 20-30 seconds, the screen empty... similar to the computer goes into mode 'sleep'. More funny thing is, the PC is set to operate at full capacity and therefore the 'sleep' mode. This problem started occurring 4 weeks ago and happen once a few days ago. Now, I am unable to work for more than 5 minutes after the initial upward boot before the screen turns off.

  I concluded (don't know if I'm right or not, where my post here) I have a power supply issue. The PC came stock with a 350W power supply, but I don't know if my linked overuse of heat damage on the motherboard or the power supply failure. I work with software music production and large audio files 70-80% of the time and the PC stays on for long periods. I am aware that these applications are stressful, but I'm not sure whether or not they can cause the types of symptoms that I described.

  So basically I guess what I'm asking is the following; is my problem, a graphics card or POWER supply number or both? Then based on the advice given, I would also like to know what the next step is to get my PC to 100%.

  Thanks in advance for the help.

  If your PC still work with a white screen, I would check the video card first, especially since you did not get the new & improved version

  Try to isolate the problem step by step, the PSU isn't necessarily the problem as the system is in place.

  Message edited by sclui56 on 08/11/2009 20:50

• The camera on my iPhone 6s is suddenly in a folder

  MY camera has moved into a folder called photography and I can't remove it.

  Tap and hold the icon and when your apps start jiggling, press on and drag the camera out of the folder app and move it where you want.