Photoshop cc 2014 update: photomerge does not work properly

Similar Questions

• After that insert update trigger does not work properly

  Hello experts!
  
  I created an insert/update trigger after and what strikes me is that it does not work as expected.
  The trigger starts a procedure that performs an insert in a second case of changing values table triggered table ("my_table").
  
  The problem is that in my second table values, which are correlated to the "my_table", are not changed by the correct values immediately. The trails of the trigger and insert!
  
  I need to update two times to values appear in my second table. Then only the data of the first update will be inserted in the second recital to table the table parent ("my_table") held the most recent values.
  
  Do you have an idea what could be the problem?
  

  create or replace
  trigger myscheme.after_update_insert_set_tw
   after update or insert
    on myscheme.my_table
    for each row
    
  declare 
  
  begin
  
   pr_my_table_tw_sync_sk(:new.lng_falle, :new.int_fallennummer, :new.lng_schaedling, :new.objectid);
  
  
  end;

  Brgds,
  
  SEB

  Remove the pragma autonomous_transaction and validation of your relaxation. This might be the reason. The transaction autonoumous cant properly consider the values of the current transaction (which is not engaged yet).

  This is not logically (if the upgrade fails or is rolled at the time you do not want the inserted row).

  If you then get a problem because the mutation of tables, you will need a different solution: an autonoumous transaction is not the right solution to workaround.

• "The Windows update service does not work. Please restart your computer.

  If I click on "Check for Updates", a dialog box appears:

  "The Windows update service does not work. Please restart your computer.

  I rebooted several times, but the same error.
  Help, please.
  Thanks in advance.

  This site will help you get the update of Windows running service

  http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• I need to re - install Photoshop and my serial number does not work?

  I need to re - install Photoshop and my serial number does not work?

  Quickly find your serial number

  Error "serial number is not valid for this product". Creative Suite

• Photoshop Creative cloud blur tool does not work as it should

  Photoshop Creative cloud blur tool does not work as it should!

  I'm going to blur a painting that I do and he don't not blur and I use the Tablet wacom Intuos 5 Med.

  and I even put the sensitivty tablets for low pressure and then by default and still not get the blur tool to do its job.

  I even adjusted the brush settings too to be able to scramble even more on hard settings, still nothing.

  at least he bluring not enough to see major changes.

  the only way I can all that Fuzzy is using the filters blur or brushes (brush mixer) settings to mix colors and make this way.

  (note) I will not post my systems plug sorry I do not have it, and even technology from adobe says that I don't have to. and so I used!

  just need to advise of don't not to share the system specifications.

  and that is what this forum forums is for advice and read what others are saying about the issue.

  It is not to publish them or share the system specs!

  with the road so I don't need that advice please?

  Hello

  It could be that your picture is too large with respect to the dimensions in pixels for the well blur tool run.

  If you zoom in to 100% you see no change when you use the blur tool?

  What are the dimensions of the image in pixels?

  (Image > Image size)

  If you try a small image, the blur tool work?

  What happened when you use the mouse instead of your Tablet?

  Can you at least tell us what operating system and version of photoshop with your?

• Update/install updated C3 does not work

  Update/install updated C3 does not work.

  Computer is an Apple C5 Desktop OS 10.5.8, Dual 2.7 GHz PowerPC, 3.5 GB of DDR SDRAM.

  I use applications Adobe C3, which now requires updates.  When an Adobe product needs an update, an update notification dialog box appears.  I click ok to download and install the Adobe updates to all my products.  I saw preferences indicating the C3 and a number of other applications.  I click on continue and the download begins.  Installation does not seem to happen or at least it is / was no indication except noting a percentage of completion passing.

  The problem is that this process continues and continues and continues during and in the course of every time I clicked on continue.

  When I could see the preferences once, I deselected all downloads there.  I then clicked on continue.  Unfortunately, the process has continued and continues and continues whenever I clicked on continue to download, but not to the best of my knowledge.

  There is no error message.

  This problem occurs for every download of the update.  I have to click Cancel to stop this process so that I can continue work on computer.

  Help, please.

  Bud Willner

  Many gave to the buggy auto update and go to the page updates, get them from there and run them locally.

  http://www.Adobe.com/go/gntray_dl_updates

• My product key on a new installation was invalid so then I activated by phone... now when I use windows update it does not work correctly

  My product key on a new installation was invalid so then I activated by phone... now when I use windows update it is not working properly because it says that I don't have a genuine copy of windows... But it seems that the updates don't come down... is it ok to work this way?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
   
  Windows security updates will continue to come down the pipe under automatic updates, but you cannot access the General updates until the system to validate.

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Mat * one years (uj-840) DVD player does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
  Check it out!

• Carpet * a DVD - RAM in Sat M55-325 drive does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0
  I have RecordNow from Sonic/Roxio which is preinstalled on the computer.

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  Hello

  Check it please this page http://support.microsoft.com/default.aspx?scid=kb;en-us;320553 Microsoft

  I had similar problem. The ODD (optical disc drive) did not appear in Windows Explorer. Method 1 from this page solved the problem. Please try the same thing and let me know if ODD working again.

• Satellite P25-S520 - DVD player does not work properly

  Difficulty of DVD player or buy the external drive

  My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).

  I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.

  An attempt to update the driver has also fails.

  I was able to copy a CD of music last night so that at least works properly.

  Does anyone know how can I fix? The important part is to be able to load my new program.

  Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?

  Thanks for any help,
  Humbaba3000BC

  Satellite P25-S520
  PIONEER DVD - RW DVR-K12D
  Driver provider: Microsoft
  Driver date: 01/07/2001
  Driver version: 5.1.2535.0
  Digital signer: Microsoft Windows Publisher

  Any external USB CD/DVD drive will be compatible with your laptop.

  However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.

  So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K