Photosmart 6510 B211a

Similar Questions

• HP Photosmart 6510 B211a unable to Scan

  I have a HP Photosmart 6510 B211a e-Print wireless printer/scanner, that I use with my desktop version of Mac OS X Lion 10.7.5 (Mac Mini) and, with the help of Parallels Desktop 7 for Mac, I use it with my Windows 7 PC.  I am not able to scan from my HP Photosmart 6510 to my PC and not able to scan from my PC to my HP Photosmart 6510.  Moreover, I am able to scan from my Mac to my HP Photosmart 6510, but unable to scan from my Photosmart 6510 to my Mac.  I want to be able to save scans on my PC (and not only on my Mac) and be able to scan from my HP Photosmart 6510.

  Also, I am able to print from my Mac and PC.  The State of the results of the wireless network Test, "no problem found.  Congratulations on the successful your printer wireless installation. »

  "When I try to scan from the HP Photosmart 6510 as a document in the file, I get the error message"Unsuccessful Scan"and"... the States please make sure that your computer is connected to the printer and try again. "When I try to scan from my PC (from measures taken by scan - scan a document or photo), I get a long error message title 'inaccessible Scanner.  I temporarily turned off my Mac and PC firewall, but I always encountered these errors.

  Recently, I changed my phone LAN Ethernet line.  Before this change, I had no problem (at the beginning, when I bought my Mac Mini and Parallels Desktop 7 for Mac, it was very difficult to get printing and scanning to work).  Now I don't know what else I can do other than HP Photosmart 6510 to uninstall and reinstall.  Before I do, I want to know if there is anything else I can do, and if someone else had a similar situation, especially those who use Parallels Desktop 7.

  Good news!

  I was not contacted Parallels, I found another HP discussion not being able to scan.  Embarrassing, I also realized that I never properly uninstalled my printer/scanner on Windows and Mac.  Firstly, I correctly uninstalled (i.e. completely) the printer on Windows and Mac, I reinstalled the printer for Windows using the floppy disk, found the site to download the latest firmware of HP, software and tools of the diagnostic utility (http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=5058336), reinstalled the printer for my Mac, run the tool of diagnosis utlity for printing on Windows (strange that it showed was installed my network printer but gave me an error that it) was not installed, so I clicked 'install'), and finally, I ran the scan on Windows diagnostic utility tool.

  I am now able to print and scan without problems.  Unfortunately, whenever I do a major change (upgrade of Parallels or MAC OS), I must start the process again.  At least now I have the process documented for future use.

  Thank you for your patience and your help.  I am ready to close this discussion as resolved.

• Photosmart 6510 B211a - I can't get BLUE print

  Printer is 4 months old. I just replaced the cartridges of HP to address real, but the BLUE doesn't. All cartridges replaced, blue does not.  I have made the clean print head test, ran the report of quality printer, but no blue appear.  The level of Est.Ink shows a full of BLUE cartridge, but is not blue print on the Test Page, either.

  Hello AJinSCV,

  Please make the "CLEAN printhead" for 2 times, which should solve the problem, that you are writing about.

  If the problem persists, you may need to call HP Tech Support (US) - 1-800-474-6836 , for assistance.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!
  I work for HP

• Try to find a part for HP all-in-One Printer 6510 - b211a (small wire compression spring)

  I have a HP PhotoSmart 6510 - b211a all-in-One Printer. A member of the family has tried to fix a paper jam by pulling with force a stuck piece of paper on the bottom of the printer. This detached from all of roll/spring rubber above the paper tray, and the spring has been lost. I tried to locate this thread spring compression on the web site of HP spare parts, but have been unable to find it.

  The compression spring is about 1.5 inches long. Any idea where I might be able to find one that would work?

  Thank you very much!

  @mmmom, you can follow this link to see all of the pieces on sale for this device. I would like to know if you have problems to view this page.

• Photosmart 6510 "Printer Error" and all lights flash

  I have a 1.5 years, Photosmart 6510 B211a who works well. Now, all lights are flashing and or my USB connected PC (Win 7 Ultimate 64-bit), or my iPad or iPhone (OS 7) connected wireless will be printed.

  When the printer is turned on it goes as usual, wireless and power light stay on and displays correctly (Apps, Snapfish, Photo, copy, Scan), I can print from all devices.

  Symptoms:

  1. in ~ 5 minutes, no noise, all LEDs (displays the screen "Please turn printer then turn it on again."

  2 "(Printer Error is lit above screen, lights beside screen and power and wireless) starts to blink in unison"

  printer does not print

  3, every 10 seconds, a very low "short moan" noise, like something is trying to move inside the printer

  4. when power is cycled it will again be print normally for about 5 minutes and then stop again with flashing lights.

  Have you tried the following.

  1. hard reset (more than once - fired power and USB)

  2. uninstalled and reinstalled software and drivers

  For any help or suggestion will be appreciated.

  Possible solution

  I had the same problem when I moved the printer to a new PC. To end, I decided to change the USB port to which the printer is connected to. well, it worked! Printer now work correctly for wired operation and wireless.

  Not sure if I got a bad USB port or that the cable was not seated properly, or if the USB port had no authority to provide the connection to the printer.

  Hope this helps someont with this problem.

• Network Installation unsuccessful Photosmart 6510 Windows XP

  Wireless printer: HP Photosmart 6510 B211a

  Router: Netgear WNDR3700, 802.11 g, WPA2-PSK

  Windows XP

  Photosmart 6510 series driver and SW ver 24.2.0

  When I try to install the driver, the Setup program reports "installing network without success." The installation program detects the printer, but does not end.

  The printer has network connection. It responds to ping, it works with HP ePrint, it displays Web pages on its IP 192.168.1.2. Test report wireless says that everything is OK.

  I uninstalled and reinstalled several times without success. Always the same problem "network unsuccessful installation.

  I'm looking forward to advice on how to solve the problem.

  I rebooted the router and re-installed the driver. Network installation has always fails. So I ran the Print utility and doctor Scan. Printing and scanning doctor found that the driver was not installed and advised me to download the driver from the HP site package Support & drivers.

  I downloaded and installed by using the downloaded driver package. The installation was interrupted by a Win32 exception:

  

  I installed the driver once more (without uninstalling), now with SUCCESS! My Photosmart 6510 is now running.

  Thank you!

• Printer HP Photosmart 6510 sends only encrypted or corrupted my computer .pdf files.

  My PDF editing software cannot read any file produced by scan on my HP Photosmart printer.  Whenever the software displays the following message:
  "Cannot open PDF file for editing, because it is encrypted or corrupted."
  My printer is HP Photosmart 6510 e-All-in-One B211a; Product number: CQ761A #B1H.
  My software is WordPerfect X 5, and it opened to all other documents .pdf - so normal text or tables - I tried on my computer.  All have been opened in a format that can be edited.
  My computer is a HP Pavilion dm4-3050us laptop new, operating in Windows 7 Home Premium.

  Hi mt88,

  If you are looking for editable text scans, you can buy OCR software that will allow you to scan to the editable document.

• Photosmart 6510 noise

  I have a model B211a printer Photosmart 6510 e - All - in - one series. My computer is an iMac with Snow Leopard OS. Lately, the printer makes a noise of rattling/knocking hard. This seems to happen when the printer screen says he's going through the process "printer preparation occurring." No idea why this is happening or how to fix? Thank you.

  garytech1, your suggestion to clean the rollers seems to have taken care of the problem of noise. This printer has always made noise, but I don't hear the rattling. Thanks also to describe how get to the rollers because graphic design is different from the model that I have. Kudos to you for your help and your expertise.

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• HP Photosmart 6510 e - all-in on: print a picture

  I want to print on paper photo of android (Samsung Galaxy S6 edge).

  The printer is set to ask what tray. Nevertheless, it prints only on plain A4 of android.

  I used the build-in print function the and place paper 4 x 6 inches, the papertray photo value and finally used the application e-print and paper Photo Paper Type value!

  Any help would be appreciated!

  As I mentioned in the op, I tried the HP e-print application.

  But I found a solution, instead of choosing the Photosmart HP 6510 directly (with ip address), I chose Photosmart 6510 with l'[email protected].

  Apparently printing via hp service it does not accept the chosen paper size (4 x 6).

  It works:

  

  But it does not work:

  

  Any other suggestions?

• How can I create custom with the Photosmart 6510 printers paper sizes

  I want to use paper sizes personalized with Word or Photoshop.

  I have a Photosmart 6510 printer all-in-one.

  While I can find the custom size tab layout in Word and can set this size, I don't seem to be able give the new size a name or save it.

  Is it possible with this printer, or is there a workaround to avoid the message 'paper mismatch '.

  Thanks for the ay help I can get.

  I'm sorry not to come back earlier.  I stumbled across a work around for this problem.  Use a different print driver for the printer.  I'll link the instructions below.  Again, sorry I don't come back with the workaround as soon as possible.

  How to assign other drivers to print in different Versions of Windows

• Photosmart 6510: photosmart 6510 prints blank pages

  Printer was working fine.  Had to change the cartridge. First of all, I didn't have black and now I don't have much color either.  The printer says I had no real HP though now it shows that I do. I never bought my cartridges anywhere but the staples.  Printing October 2012 have changed many cartridges before you buy.  Followed everything I could find.  Still not printing.

  Hi @mjohns390,

  I read your post and see that you can not print in black or color now. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document is for the cleaning of the cartridge and the contacts, check the tab on the cartridge and the printer reset. "Incompatible cartridge" or "indicated ink cartridge needs to be replaced" message on the c...

  If the problem persists, perform a power reset. A alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing. Do not take into account the title.

  This model has a permanent print head, this video shows you how to access the print head, so you can manually clean the printer and soak the printhead, it's my own personal recommendation, not one of HPs, is to use the solution proposed in the following videos.  I suggest only doing this if the printer is out of warranty.

  Once you get to the clock at 3:20 minutes, you can stop this video.

  Разборка HP Photosmart 6510 (disassembly Photosmart HP 6510)...

  This video is for a different model but it will provide the steps to move the print head and cleaning, also if you continue the video it will provide measures to remove the print head and soaking. Play video 01:24 minutes. HP 5510 will not print black and color - print head removed and cleaned.

  If you have completed all the above steps and your product still has a problem, service the product.

  I hope this helps. Let me know how make you out. Thank you.

• Cannot scan to the computer. Photosmart 6510

  I have just purchase a photosmart 6510 and I cannot scan to the computer.  The printer tells me that I need to activate this via the printer software.  I know that I have installed all the software from the disc supplied.

  I can't find where I have activate the scan of the computer on my laptop.  Support information tells me to click the icon for the printer to my desktop, I do not have!  I tried going through the control panel and impossible to find something there.

  I go in the HP folder in my Start menu and click on scan HP that I get the following message "the machine HP photosmart 6510 series is not found".  I don't have a problem with printing at all.

  Tried to start printing and scanning of doctor and who did not make a difference. (In fact, the scan option came not on it).

  How can I fix this please?  I'm running Windows Vista Home premium.

  Hello.  Thanks for your reply.

  I've sorted really the problem now.  But let me explain what it was.

  I tried tool doctor who recommended you after browsing these forums, without success.  In fact, when I ran the scanner, he told me that he had no problem with printing, but there was no mention of the scanning anywhere.

  In fact, I uninstalled all HP software, removed the printer from my control panel.  Then reinstalled the software from the disc and then installed the printer again (I did things the opposite of the front walkway).  And the scanner function now works.

• Photosmart 6510 - no computer"found" - "Scan to computer" not activated

  Hello

  With the help of HP Probook, with Windows 7 Professional.  64 bit.

  My Photosmart 6510, I cannot scan documents on my laptop. I think that this only started happening recently when I started to use AVG PC Tuneup software, but I have district check if this may be the cause that the scanner is aunable to detect the computer.  I get the following message:

  "No computer was found - make sure that the printer software is installed on your computer and that the 'Scan to Computetr' is enabled via the printer software.

  I uninstalled the software and reinstalled again.  When reinstall it wonder "Enable scan" I agree.

  Previously, the "Enable scan" message popped up whenever I have rebooted, but that has stopped so I think something may have changed.

  Any suggetsions would be welcome.

  TX, Kurt297

  Hello

  Please, download the following tool and run it on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-135113-1/HPPSdr.exe

  Hope he will give some answers if not reinstall full feature software and drivers from following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5058336

  Kind regards.

• Photosmart 6510: lines horizontal and top and bottom of page when scanning

  Hello

  Scans of the bucket of my Photosmart HP 6510 leave a horizontal line at the top and bottom of the page.

  I tried to adjust every page that I scan to align as straight as possible on the glass and this sometimes helps a bit.

  I am able to bypass the lines in culture to, but would prefer to find a real solution.

  Any help would be appreciated because I don't know a lot about the scanners, thanks!

  I've included a sample page below (the mark on the right side is not dirty glass, it has been a staple in the page):

  

  Welcome to the HP community @lgilb01,

  I wanted to tender hand to respond to your message on the lines that you notice when you scan to scan in your Photosmart 6510 bed. It seems to me that there could be some light enter when performing the analysis, causing lines. If you are only scanning one page at a time, the lines should not appear as they are now.

  Here is a troubleshooting guide for you to try. If the lines do not fade, contact HP directly to see about a replacement printer.

  HP Photosmart 5510, 6510 and 7510 e - all-in - One Printer Series - vertical stripes, lines or scratches in Copies or scans

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope I helped!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.