Photosmart 6525: Printer Select drawer

Similar Questions

• Photosmart 6525: hp utility closes unexpectedly when you try to set Scan to computer

  A Photosmart 6525 printer connected through WiFi to a Mac Pro under Mountain Lion (10.8.5)

  Everything seems to be alright except for the "Scan to computer" feature which cannot be enabled.

  Utility HP v. 5.10.1 closes as soon as you click the "Scan to computer" on.

  Installation has been filed using the last updated: Photosmart-6520 - series_v12.24.0.dmg.

  This works fine in Snow Leopard 10.6.8.

  Thanks for any help

  Thanks for help, but my problem is not a printing problem but rather a utility HP problem that happens when I try to activate the function "Scan to computer".

  However, I did what you suggested but to no avail. Repair disk permissions really did keep many errors about files in Safari and iTunes.

  Finally, I did a new install of OS X Lion mountains fresh on a separate partition, added to the printer, and voila, everything went well. (Note however that even on this brand new facility I stil have the same permission errors, so they probably makes no sense).

  In conclusion, it seems that there is something wrong with my drive work system and I'm afraid I'll have to reinstall Mac OS X.

• Scan multiple pages to a PDF file on a printer HP PHotosmart 6525

  I just bought printer HP PHotosmart 6525 and I can't seem to understand how to create a PDF file of several pages of analysis.

  I checked this forum using web and couldn't find the answer.

  Once the page is scanned, I gives me an option to save the file. The only other option is "Cancel".  After saving the file, I was able to scan another page, which is saved in a different file. How can I keep other pages of analysis without saving the file?

  The parameters of scanning as follows:

  Article type: Document
  Type filey: PDF
  The option to save each page in its own file is not checked.

  I use my computer HP software. I tried the digitization of the document of the control panel of the pronter with the same results. No possibility to scan several pages.

  I use Win 7/64-bit.

  Hello

  Open the HP software and select scan a Document or Photo.

  Select the PDF option.

  Be sure to check the preview Scan and set the resolution to 300 DPI or below.

  Click Scan and use the pages add to scan additional pages.

  Once completed the analysis, click Save.

  Shlomi

• HP Photosmart 6525 - tune printer problem after Installation

  Hi - I just bought and installed an HP Photosmart 6525 (connected via wireless), for use with a desktop computer HP running Windows 8.1.  I select the HP Photosmart icon on my desktop that opens the HP printer Assistant - however I get the following window:

  C:\ProgramData\HP\HP Photosmart6520 series\HPUDC\HP Photosmart 6520 series (network)-UDC_Install.json

  C:\ProgramData\HP\HP Photosmart6520 series\HPUDC\HP Photosmart 6520 series (Network) \UDC_device_2.json

  I click on the OK button - another window pop up opens with an additional line:

  C:\ProgramData\HP| Series\HPUDC\HP Photosmart6520 HP Photosmart 6520 series (Network) \UDC_device_2.json

  I click OK - the HP Printer Wizard is blank with a "string not found" poster.

  What is the cause of this and how to fix it?

  Thank you

  Robert

  Hello Robert, I hope you are well!

  I understand that you see a pop up window after you install the printer software. I have a guide that contains a patch, I would see you for that matter: HP Printer Wizard opens with an error in Script or in Notepad

  If the patch does not help, try to uninstall the printer software and put it back again by running the HP printer install wizard for Windows.

  Happy Monday

• All-in-one Photosmart HP 6525: HP Photosmart 6525 stopped properly print in black

  Happy Friday! I had a problem the last two weeks with my printer. I usually use the printer on a daily basis for school. I got the impression during 1 1/2 to 2 years and have not had a problem until now.

  Here is a list of what I've tried so far:

  • Aligned the printer
  • Clean print heads
  • Restored by default
  • Erased the vents on the ink cartridges
  • Clean the screens between the printer and the cartridge

  I did all the steps that I could find for troubleshooting on the internet. Is there something else I can do?

  Hello @chawna,

  Welcome to the Forums of HP Support!

  I understand that you are not able to print black ink of your HP Photosmart 6525 e-all-in-one printer. Thank you for all the troubleshooting steps you have already finished before reaching out for support.

  Unfortunately, at this stage, because you have already completed, troubleshooting steps listed here, the next step would be a hardware replacement as system within your camera HP Photosmart print head is defective. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head is defective in your printer printing system is defective. On this model printer, printhead system is a non-replaceable element.

  I highly recommend to go to the Technical Support queue by phone in order to explore the additional hardware options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  When you talk with the phone support agent, please notify them of all the troubleshooting steps you have completed and the results of these measures.

  I wish you good luck going forward with this!

• Photosmart 6525: auto efax print photosmart 6525

  Efax account and can receive fax, but only show up as an email. Q: a possible incoming fax to print automatically?

  The printer (Photosmart 6525) allow Eprint and connected.

  Appreciate any help,

  Frank

  Hi Frank,.

  Incoming faxes can be printed automatically, for that you must update the HP ePrint email in the settings of efax.

  Connect your user on eFax.com and change preferences as follows:

  • Sign in to your eFax account.

• is there a way to print envelopes of card half fold on a hp photosmart 6525?

  Is there a way to print envelopes of card half fold on a hp photosmart 6525?

  Hi KenRum,

  Here is a table with the envelope sizes supported for the Photosmart 6525.

  Type of envelope	Envelope size
  US No. 10	105 x 241 mm (4.12 x 9.5 in)
  Card envelope	111 x 152 mm (4.4 x 6 in)
  DL	110 x 220 mm (4.33 x 8,66 in)
  C5	162 x 229 mm (6.38 x 9,02)
  C6	114 x 162 mm (4.49 x 6.38)
  Japanese envelope Chou #3	119.9 x 235,2 mm (4.72 x 9.26)
  Japanese envelope Chou #4	90 x 205 mm (3.5 x 8.1 inches)
  A2	111 x 146 mm (4.37 x 5.75 in)
  Monarch	98 x 190 mm (3.87 x 7.5 in)
  6 3/4	92 x 165 mm (3.62 x 6.5 inches)

  Fold half card envelopes are available in different sizes. Compare the size of the envelope that you try to print to the specifications to determine weather or not, you can print on them.

  Here is a link to another forum with other thread trying to custom Setup paper sizes, this may or may not be useful, but here it is in case you want to browse. > Print two greeting cards envelopes

  I hope this information is useful.

• Photosmart 6525: Blank Pages when printing is complete

  After a print job is completed, the PhotoSmart 6525 continues to feed the sheet after sheet of blank paper until one of the following conditions occurs:

  1. The printer is out of paper
  2. I managed to successfully cancel the job (what happens usually after that at least 10 blank pages have been through, the printer jams unless)
  3. The paper jams (usually after 5 or 6 white pages). This is what happens to 90% of the time.

  Troubleshooting steps I have already taken:

  1. Hard reset of the printer (three times)
  2. Clean all rollers (at least twice)
  3. Reset the print Mac (twice) subsystem
  4. Reinstall the latest version of the printer software (also at least twice).

  Nothing did. Any other suggestions? Otherwise, it will be the first (out of seven) HP printers I've owned that lasted less than six years (in this case, 18 months).

  Hey @Fogbear,

  At this point, I will send you a private Message with instructions on how to perform a reset of programming full semi on your printer.

  Please check your private Messages for instructions. Once the reset is complete, please test stand-alone print to see if the problem has been resolved.

  I look forward to hear from you!

• Photosmart 6525: will not print in black

  My photosmart 6525 will not print in black ink.  Clean the printheads 6 times. Cartridge replaced twice. Any suggestions?

  Hello

  Welcome to the Forums of HP Support! I see that you are having problems printing in black. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try the following steps to see if it will solve the problem, HP Deskjet 6520, printers HP Photosmart 6520 - printer prints a blank Page or doesn't print in Blac...

  Here is a document to manually clean the contacts of the cartridge, "not compatible ink cartridge" or "specified ink cartridge needs to be replaced" views for HP Deskjet i...

  Do not take into account the title.

  Here is a document for the reset of the printer. Ignore the title, HP printers - solve the 'problem with printhead,' "The printer failed," 'Ink system failure', or ' 0 x. / c0 > »

  Please let me know the result and if there is anything else I can help you. Thank you.

  

• How to install a PHOTO HP 564XL ink cartridge in the printer all-in-one HP Photosmart 6525?

  I have a HP Photosmart 6525 all-in-one printer.  I buy original HP 564XL ink for my printer in a color combo-pack at my local Costco.  The package includes 3 color cartridges as well as a 4th label "Photo".  My printer has only the slots 3 color + a location for a larger black cartridge. I would use the photo cartridge, but my question is:

  How to install the Photo cartridge?

  Thank you in advance for your help!

  Hi l_john,

  I understand that, with the combo, pack of ink you bought came with a Photo black cartridge, and you're wanting to use it in your printer. In regards to your printer, it is not compatible with the black cartridge Photo, both black and Photo black cartridges are not interchangeable. I have included a document here for you that explains this in detail.

  Thank you.

• Unable to get started on my new printer HP Photosmart 6525 ePrint

  I have a MAC 10.7 and just bought a printer HP Photosmart 6525. I try to activate the ePrint but can't find where I sign up and enter the code from my printer to start?

  I get an error message that says submit Ajax failed: 403 Forbidden error

  I understand that you found ajax send error on your computer. I would like to try restarting your computer and return to eprintcenter and try again. After restarting your computer and if its still working if possible I would try using a different browser.

  Let me know if it helps.

• Photosmart 6525: Cannot activate ePrint for Photosmart 6525

  I had the Photosmart 6525 for awhile and it works very well in general.  I am able to print to it from any computer in the House.  I'm trying to set up ePrint, so I can print to it a chromebook but not having not success.  And I already went through the steps of troubleshooting CIHI then please don't just tell me to go their.

  Tempting of the LCD:

  When I press the icon ePrint, it downloads successfully and poster

  • E-mail addess: < code > @hpeprint.com
  • Status: connected
  • ePrint: on.

  Then, when I type 'Print Info', it tries and then fails saying: "the printer could not connect to the server."  Then, when I press "OK" to go back, it will display:

  • E-mail addess: not available
  • Status: Not connected
  • ePrint: on

  From the web interface, I deleted the web services and reactivated their.  On-screen where she wants Méthé Web Services account must be activated to ePrintCenter", then I get connected 'HP' page and login.  It runs for a long time (about 60 seconds) and finally comes back with a page indicating "your printer is activated.  I then went back to the web interface and click on "I have activated my ePrintCenter printer" and click [finish].

  It then displays a page view:

  • ePrint status: not connected
  • ePrint: on
  • The printer Email address: see the fact sheet *.

  But I don't have any document information because I can't print a.

  I then click [Ok] and once again, it checks for the activation of the printer and indicates ePrint: on

  If I select "Print a Page of Info" and then click [Print Info Page] it says "Connecting to Server" and then "Print Info sheet", but then the dialog box disappears and nothing happens.  Does not print on the printer, nothing displays on the web interface.

  On the 'Connected HP' page if I click [next], it accesses the devices page and shows no devices listed.  If I click on [add device] he invites to the "claim code" and I have no idea what it is because I can't print the worksheet 'Info' to get it.  (I already tried the steps listed here: http://support.hp.com/us-en/document/c03550536 )

  I am connected to the internet via a router.  I can access with success of internet pages (like the one I'm typing this on) of all devices in the home.

  Worked by calling support.  A "partial reset" via the menu 'help' has solved the problem.

  If you are experiencing a symptom where the printer stops an address different email every time, the reset partial should solve that.

• Photosmart 6525 will not connect to the internet to get updates day &amp; ePrint. Test page shows connected. ??

  Trying to install my photosmart 6525. It works wirelessly to my computer desktop & laptop but when I try to open ePrint it wants to check updates and reports that it cannot connect. That is what it is?

  The wireless report Test results show all "TRANSMIT" and shows 'connected' to the internet.

  I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, then proceed as follows.

  1 obtain the IP address of your printer
  a. This can be done by pressing the icon on the printer wireless.
  2. Enter the printer's IP address in a browser.
  3. Select the tab network at the top of the page.
  4. on the left, select network.
  5. Select Network (IP) address
  6. select manual DNS server
  a. manual Preferred DNS should read 8.8.8.8
  b. alternate DNS server should read. 8.8.4.4
  7. Select apply you could get a fair warning select OK.

  Let me know how it goes.

• HP PhotoSmart 6525 Switching Back-and-Forth between USB and wireless

  Hello

  I set up my HP PhotoSmart 6525 following installation 'wireless with a router' instructions (i.e. No Direct wireless).  I am able to print from my laptop through the wireless network.  I would also like to be able to print from my laptop using the USB connection at the time where my laptop is physically sitting next to the printer.  At times where it is not the case, I want to continue to be able to print wireless.

  Is it possible to install the printer drivers on the laptop so that I can switch easily back and forth between printing USB and wireless printing?  I suspect that it is not possible because of the user's guide has a section describing how do to "Change a USB connection to a wireless network" you click on an item of menu called "convert a connected USB printer wireless.  There are no instructions to know how to convert USB.  In addition, the use of the word "convert" makes no sound as you can maintain the two methods to print simultaneously on a single computer.

  Does anyone know if this is possible and if so, how?

  Thanks in advance,

  Paul2

  Hey Paul2,.

  I see that you have the HP Photosmart 6525 installed for a wireless printing capability and would also like to add a USB driver so that it is available for use by the printer.  Please follow the steps below to add a copy of the printer for USB printing.  The steps below are for Windows 7 and below computers.  If you have Windows 8, then the steps will be slightly different then let me know.  Please let me know if you have a Mac, because I can provide these steps at this point here.

  • Press the start menu of the computer
  • Select all programs
  • Open the HP folder
  • Open the folder for the Photosmart HP 6520 series
  • Select "printer setup and software."
  • Select the option to add a new printer
  • Select the USB option
  • Connect the USB cable when the software asks and proceed through the installation process

  You let driver Jack without wire in place and add a second printer in the devices window and print USB printers.  The USB printer may contain 1 copy in the name as a differentiation, but it must also indicate network in the name of the printer to indicate that it is the wireless option.

  I hope this helps.
  Jason

• HP Photosmart 5520: Printer prints blank pages suddenly

  Yesterday, my printer decided that he would simply print blank pages with a black line in the middle. I did a test print via the configuration menu and it prints fine. My wife can print wireless. And until yesterday I had no problem.

  On and off, but today, I have the same problem. Help?

  Hi @StuartY123,

  Welcome to the Forums of HP Support!

  I see you are having problems printing from your Mac to your printer HP Photosmart 5520, but your wife is able to print correctly. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like there is something wrong with the print on your Mac driver. To resolve this problem, we will need refresh your printing system and re - add the printer driver.

  Reset the printing system:

  To begin, I will have you reset the printing system on your Mac. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system" because the steps are the same for Mac OS X 10.10. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Photosmart back in right now.

  Once the reset is complete, proceed to the next step.

  Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Add device:
  1. click on the menu of Apple , then Preferences System.

  2. click on print and scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the driver of the HP Photosmart camera is selected.

  

  6. click Add to add the printer to the list. Do not add the AirPrint driver.

  Source

  Once your printer is properly added to, please try printing again to verify that the problem is now resolved.

  Published by Mr X-23source.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!