Photosmart 7525: Photosmart 7525 - not of Scanner selected

Similar Questions

• have a brand new photosmart d110 printer/copier/scanner. My Mobile Spartan has xp.won't work :(

  need to know if there is something I can do for my Mobile Spartan w / Windows XP compatible with my HP photosmart D110 printer/copier/scanner. People have told me that I can download a driver to make it compatible with Windows XP by downloading a driver. Others have said that my computer does not have the ability to be compatible because the printer needs Vista to work. I am really confused about this. I am not very computer but I get. If anyone can help me I would really appreciate it. Thank you

  Hello

  Wep passphrase is the security of your wireless network, so I can't tell you what it is. However check bottum of your router/modem, most of the time people do not know their code they use standard code that is supplied with the router, and the code is on the bottum router ussualt.

• HP Photosmart 7280 not recognized via WLAN MAC OS 10.7.4 Lion

  The problem: HP Photosmart 7280 not recognized via WLAN MAC OS 10.7.4 Lion on my Mac Book Pro (end of 2011)

  What I tried:

  Reset the printer, reinstall the HP software, update via Apple update Routine.

  LAN works perfectly.

  My iMac 24 "with 10.6.8 Snow Leopard WLAN print works perfectly.

  Sitting right next to my iMac with my new laptop, the printer does not appear in 'printers '.

  Someone has an idea or knows this problem?

  Thanx for some feedback

  jhwb

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• When you try to scan using the HP Solution Center - I enter the file type, but am not able to select where to go in the scan to: box - just get an error nessage

  When you try to scan a document to the Photosmart C6180 ALL IN ONE PRINTER. FAX, SCANNER, COPIER, VISA FROM 64-BIT TO A DESTINATION ON THE COMPUTER 'EG' TO THE: DIGITIZATION TO: WINDOW - THE WINDOOW IS BLLANK AND DOES NOT ALLOW THE SELECTION OF ANY DESTINATION? RESTARTING THE COMPUTER DELL 530 S, TRIED TO REMOVE AND RE DOWNLOAD SEVERAL TIMES, TO NO AVAIL.  THE DISC OF HP THAT I USE IS "HP PHOTOSMART C500, C6100 AND C7000 AIO SERIES PRINT AND SCAN DRIVER, VERSION 080.001.225.000 MICROSOFT WINDOWSD VISA" ANY HELP APPRECIATED!

  Hi JIMANNA,

  1. you try this for the first time?

  You can try to create a new user account and check if the problem occurs:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The text of the e-mail under the column of the object does not match the selection

  When I get to my Inbox and select an e-mail to open the middle box and the text box below do not match the selection in the object column. This has occurred recently and only on my laptop. My office works fine. The central area and the text matching, this email has been deleted but the text won't just change and go. I'm going on a trip tomorrow, and if I can't fix this, I won't be able to open emails with possible solutions. I'll see answers but can't open them.

  right click on the folder, select Properties, and then on the button repair.

• Modules window does not appear when selected in Tools/Addons except new open first tab

  Addons window does not open when selected Tools/Addons, except new (empty) tab was selected first. Is there a fix or is this a bug

  This has happened

  Each time Firefox opened

  == upgraded to 3.0

  It is a problem with one of your modules, Mr Tech Toolkit, it is a known problem, but I don't know any solution, although there are workarounds.

  In Mr Tech Toolkit options, under the section "Manager Hacks > Behaviour ', you will have to"select target window' set to 'new tab '. One solution is to change to 'new window '.

  An alternative is to use a bookmark to open Bookmark Manager modules in a tab at the following location:
  chrome://mozapps/content/extensions/extensions. XUL

• I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3.

  I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  tupensi wrote:

  use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  Then you should post on the Microsoft Mac forums where to hang out the gurus of the Office, as is the Microsoft product, with that you are having problems:

  http://answers.Microsoft.com/en-us/Mac

• HP deskjet F4500 all-in-one not the scanner to the computer

  I have a HP Deskjet F4500 all-in-One. I can use the printer and copier, but not the scanner. I use a USB cable for the connection and I have Windows XP.

  Thanks for any help.

  You will need to provide some information... or see one of the links here--> http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=56740&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3944758

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• Error when you try to modify or to open a video (WLMP) using Windows Live Movie Maker: Movie maker does not support the selected file

  WLMP does not open on windows live movie maker?

  Well I made a video Windows live Director and saved it but when I try to open it to change some more it is said "Movie maker does not support the selected file" but he should not let me because I did in windows live Director please help!

  I'm having the same problem, but if I double click on the Window media player file appears help!

  ================================================
  Right-click the. WLMP file and try... Open with / Windows Live Movie Maker...

  See the following article

  Windows 7 - changing the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I created 'language bar' for 5 languages. All 4 works well, but "Korean" does not work when selected. My system is windows 7 ultimate.

  I use a few different languages in communication with others.

  So I implemented 'language bar' on my new windows 7, just like I used to do it on windows xp.
  I followed through all the suggestions to make trouble, but it still does not work.
  "Korean" does not work when selected.  He types English instead of Korean.
  Maybe "Korean" was not installed.
  Is it possible to make my language bar works correctly?

  Hi John Kim_775,.

  Please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Not able to select calculation Variables Manager

  Hello

  Not able to select any variable with variable selector during the creation of business rule. Variables are available in the Variable Designer

  Version (11.1.2.4).

  Thank you

  Riadh

  Hi Raju,

  Variable selector is available for block Member, formula and condition.

  "You are not supposed to select Variables to 'Start' and the end."

  According to the guidelines of the screenshot, click on the form and then try to select the variable.

  Kind regards

  Bala

• Cmd - H not hiding text selection

  Not sure if it is a small problem, but all of a sudden command - H not hiding the selection of text block when I've got live text selected with the text tool. Used to work. This happened to someone else? Is there a setting I'm missing?

  Illustrator 2015.2.1

  Cantina Dan:

  It works as it was when I disable GPU performance:
  

  Turn it off, give it a try and then decide which is more important to you: features of Adobe Illustrator GPU Performance improvements .

• Download the image does not match the selected image - incorrect cataloguing.

  Hi have downloaded an image but it does not match the selected image.  He has obviously been catalogued incorrectly.

  AdobeStock_40645074

  Can you please SRS.

  

  The image image / I download who is it

  

  Thank you

  Hi Karen,.

  I have a license of the image on my end. You are right, that the preview is incorrect for the file I.

  We would get the image inspected and you will receive a credit on your account by Monday, May 16, 2016.

  Kind regards

  Gerard

• Hello, I do not have the selection icon to choose the direction of the Arabic language in the CLOUD of CS. Where is it, please? Thank you

  Hello, I do not have the selection icon to choose the direction of the Arabic language in the CLOUD of CS. Where is it, please?

  Thank you

  Cloud of swap language http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html can help