Photosmart C4780: Reconnect my C4780 to my wireless network

Similar Questions

• Once I connect my Photosmart C4780 to my wireless network, I lose everything internet.

  My router is a Netgear WNDR3700v3 with firmware version V1.0.0.22_1.0.17.  I can get internet to work on my HP pavilion dv7 with windows 7 64 bit, my smart sony TV, my xbox 360 and a phone that I connect to my wireless router.  The second, I configured my HP Photosmart C4780 wireless router I lose internet on all devices.  I can connect to the router again but can't get out to the internet. What would be the printer could prevent me from accessing internet?

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP Photosmart C4780 - cannot operate wireless

  I just spent 5 hours trying to implement a new Photosmart C4780, I bought for my mother.

  I ran through the installation easily enough and chose to use the wireless printer. He took a series of measures, including the selection of my wifi network, enter the key security etc but at the last stage, it failed without explanation. I don't remember the exact message, but it was something in the sense of "the printer could not be completed.

  I tried again and again to complete this and things seem to go from bad to worse.

  1. now, when I reached the page "search for wireless networks" it shows without networks despite Windows 7 showing at least 10 networks in range. I have to manually enter the SSID details and although it seems to work, the installation still fails in the final phase.

  2. strangely, the printer now seems not be able to start up. I unplugged it etc and when I turn it on the screen shows the HP logo with what appears to be a below progress bar. It's never happened that.

  I desperately need to get this job because I won't be home from my mother to Spain for the weekend. HP support seems to be Monday to Friday only, which is not very useful and there is no way on earth she could do it voluntarily.

  Any ideas on what to do next?

  OK on the front panel of the printer: Setup > WIreless > start WPS > Pushbutton.  Within 2 minutes, press the the router WPS button.

  This will connect the printer to the wireless network, then simply run again the HP software (Printer Setup & software) to complete the process.

• HP Photosmart C4780 connects not (wireless) on Mac or wireless network

  Sorry for the long post, but please someone help me!

  I bought my new printer a few days (actually 14th) and began to implement on my MacBook Pro with my Wi - Fi, which is routed through a Linksys router and mainly through my desktop computer (a PC with Windows XP). I used the CD that came with the printer to set it up on my Mac and it has set up the fine by USB, but when I try to set up the wireless, I get the following message:

  "Device not connected: to configure the network settings for the selected device, please connect via USB temporarily." The device can be disconnected from the USB once the network settings are transferred. »

  I reconnected and got the same message over and over again, so I decided to set up on my desktop computer instead. This does not work either and I got the same message on my desk I have on my laptop. Uninstalled on both computers, reinstalled and I STILL got the same message. At this point, I'm about to throw all the electronics in my bath tub and be done with them but on the contrary, I checked (and double checked - and triple checked) my router via my browser settings, fact that I know the SSID and the password and reconnected to the network through my laptop... Once again, the same message. I tried the network installation of push, the installation of the network PIN, I feel I have tried everything! Probably miss me something small, but eyes fresh is always an asset.

  Can someone help me? I printed a Test report of the network so that a Page Network Configuration and settings I received both... if need be, I can post the information from my router, in order to verify to implement, but after two days of trying to implement something that should have taken ten minutes (sometimes) I'm at my wits end.

  Network Test report:

  "Your HP printer cannot find your wireless router. Check our wireless router has power. Make sure that your network (SSID) HP printer name exactly matches your router (SSID) wireless network name. If they do not exactly match, run the installation of the wireless network to set up your HP printer. »

  How to change the network name of the printer to match?

  Summary of diagnosis:

  Wireless on: PASS

  Wireless work: PASS

  Find the network name (SSID): FAILURE

  Security: PASS

  The printer settings compatible with the wireless router settings: does not work

  No filtering: does not work

  Related: Does not work

  Signal strength: does not work

  Other networks detected matching your network name (SSID): does not work

  Detected wireless networks: 1

  Downlink Count: 0

  Channel: Does not work

  Although I was given my SSID (which does not match my home network - but how can I change this?) and my MAC address (I guess for the printer), so I didn't have the IP address of my printer has no way for me to get online to check all the settings! Is there another way to get this IP address?

  Summary of configuration:

  Communication mode: Infrastructure

  Authentication type: open

  Encryption: no

  ______________________________________________________________

  Network Setup page:

  General information:

  Network status: offline

  Type of connection: no

  URL to Web server integrated: http://0.0.0.0

  Firmware Version/Hostname/serial number were all given

  Admin password: not set

  802.11 wireless

  Hardware address (MAC): data

  Status: disconnected

  Port 9100

  Status: enabled

  mDNS

  Status: enabled

  Service name: Photosmart C4700 Series [6 last digits of my MAC address]

  SLP

  Status: enabled

  Microsoft Web Services

  WS discovery

  Status: enabled

  WS Print

  Status: enabled

  PC connected (s)

  Address IP/hostname: (nothing is here) Time since last access (mm: SS): (nothing is here)      

  Number of 802.11 networks discovered: 1

  (my correct information of wireless network is here, including the SSID, Mode (Infrastructure), BSSID, Channel, privacy (RSN), Auth (WPA - PSK), Encrypt (TKIP-AES), Signal and WPS (no))

  Help!

  Did you read this on your Verizon FIOS router? : http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Connection-problems-with-Verizon-FIOS-Actiontec-routers/td-p/892967

• Misplaced installation CD, can not reconnect the printer to the wireless network

  Recently, I replaced my router, which forced me to re-setup my home network. A consequence of this is now my HP Officejet Pro does not connect on the radio I searched up and down to the CD without a bit of luck. Is there another way to connect my printer to the network?

  Thank you

  Aaron

  First replace your router you should not have to reinstall the software.  Try here.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  If you think that your driver and software are watered, download the installation set up files on the web site of HP.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4323659 & CC = US & DLC = in & LC =

• Photosmart more B210b: printer not connecting to wireless network

  I try to install the printer, which has worked before with a different wireless router. I can't connect to the network, even if the print network configuration page says PASS and YES at all the right place with this new router (DB of Belkin Wireless Router N600DB).  When I connect to the router, the printer does not appear in the list of connected devices, but the printed page says it IS connected (has assigned IP address192.168.1.100 on the page). When I try to install the device and connect it to the laptop computer, the IP address is not recognized.

  Both devices are in the same network (belkin.b2.c)

  I've completely disabled the firewall, I install it, both in the protection antivirus software, windows AND router, have revived all 3 devices (printer, router and laptop), but still unable to connect.

  I'll be very grateful for your help.

  JorgeAV wrote:

  Thank you Dragon-fur

  I have a problem with your suggestion and a question.

  First problem: I can't change the SSID name or to change other settings of the printer because I can not connect at all.

  The question is, I see my router dashboard that the Pool of IP address of departure is 192.168. 2.2 and the Pool of IP address is 192.168. 2.200 now, IP address, I can see the printer is 192.168. 1.100 as you can see, the range is different. This could be a problem?

  Comment

  The printer is on a different subnet from the rest of your network.  Yes, it's a problem.

  The printer and the router - and indeed, the rest of the network - these must all be on the same subnet.  Any network - but they are to be on the same.

  For example:

  It is not important whether you choose 192.168.1.1 for your gateway router

  OR

  whether you choose 192.168.2.1 for your gateway router

  The rest of your computers, printers and devices must be on the same network of "sub" as the gateway router.

  You can try changing the IP of the printer on the printer control panel if you can't connect with EWS (built-in web server).  Push the printer over subnet 2.

  Maybe give printer IP address: 192.168.2.226

  Click on the button the printer wireless...

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Photosmart 5524: Photosmart 5524 will not connect to the wireless network

  I recently moved house, and since the move does not connect the printer to the network.

  The router and the parameters are the same as before the move, and appliances are on opposite sides of the same coin.

  Initially, he sees the network, but does not connect when you press the WPS button or the password.

  After the first attempt he cannot see all networks at all until the settings are reset, even if the network name is entered manually.

  Printed on the test result to get a 'Pass' for YOU wireless and WIRE WORKS, a "failed" to FIND NAME of NETWORK and "Not run" on all other tests. The proposed solution is not useful, as it suggests using the Wireless Setup Wizard to set up the printer, which I already do.

  No other device has problems see the network or connection to it. MAC filtering is not lit. Some devices have a static IP (required to stop Ipad wife being a tyrant of intellectual property), but the router DHCP is still active for most devices.

  Temporarily remove your SSID of your router password. Now try to connect to your SSID unsecured. Are you successful? If so, go back and add WA2 - AES with a password and try again.

• HP Photosmart Premium 360 g, can identify my wireless network, but said the WPA is not valid

  It's a family printer used, I've never connected to the front, I downloaded the software and drivers.

  The WiFi radio is on, and it was printed from my computer via a USB connection.

  He repeats just my network password is not valid, and it certainly isn't.

  Have you tried printing and scanning doctor?

  Its here

  www.HP.com/go/Tools

  This tool can help determine if your printer on the network of law etc.

• Cannot connect to my wireless HP Photosmart C4780

  Evertime I try to connect my HP Photosmart C4780 to my wireless network, I get this message:

  "Your computer is unable to communicate with your printer at 192.168.1.127. This can be the result of firewall software. If you use firewall software, make sure that the 427 UDP port is unlocked for the incoming and outgoing traffic.

  Your PC cannot communicate with your printer at address 192.168.1.127. Check all cable connections. Check that the printer and the PC and the router are powered on and connected to the network. »

  I tried to disable my firewall and that did not work. All the cables are connected and is turned.

  OS: WIndows 7

  Wireless router: Cisco series router Linksys E1000

  -Elliott Crouch

  OK, let's check some basic first things.  Are you printer connected to YOUR router or your PC?  Print a Test of the network wirelessly from the configuration > network area of the front of the printer.  There, it will tell you the name of the network to which it is attached.

  Compare the IP address to your printer.  Is - it the same, except the last numbers?

• Problem with the HP Photosmart C4780 connection after moving

  I recently moved into a new place, so, get a new router, connection. Since I moved, I was not able to connect my printer (HP Photosmart C4780) to the wireless network. When I try, an error message indicates that the IP address of the printer does not match the one on the PC (a Windows 7 32 bit). How can this problem be solved? Thanks in advance

  From the front of the printer: [Scan] Setup > network > network by default.

  Now run the HP software to add your printer (start > all programs > Hewlett-Packard > C4700 series...)

• Where's MAC address for Photosmart C4780?

  Hi people,

  I'm implementing this Photosmart C4780 with my wireless network that uses MAC security screening. Can someone tell me where to find the MAC address of my machine? It must be 8 digits with numbers and letters, possibly separated by a colon.

  Thank you!

  Well, to answer your question, it can be found on a network configuration Page or test wireless network, as well in the configuration > area of the network control panel.

  Now, please recognize that MAC filtering is NOT a security measure and can cause problems with the installation of the printer.

  Read more about it here.

  I would recommend filtering MAC do not hide the SSID and simply apply WPA or WPA2 with a password strong.  You will be safer than you are now with much less hassle.

• Photosmart C4780

  Upgrade to Maverick - new airport Time Capsule (so new wireless network)

  Worked before updates above...

  Printer does not recognize uninstall and install the wizard. Won't find it.  When these wizards say to choose the device, it does not show.

  Try to change the ssid and wep on the printer to be able to connect wireless network to share the printer.

  Thank you

  Steve

  Hi SteveMacH,

  I understand that you have a printer Photosmart C4780, have changed wireless routers and are eager to connect to Mac OSX 10.9. I will definitely do my best to help you with this.

  Because there is no full software functionality to connect your printer with OS X v10.9, we take a slightly different approach to get the printer connected to your router again.

  First what you will do is to restore the default settings of network on the printer. For this, with the printer on the main screen, tap the button next to the analysis, then the button next to the wireless Menu, and then select default network. After 5 minutes, please proceed to print the Network Configuration Page, and this will give you the IP address into the browser (which will be explained momentarily).

  At approximately 01:19 seconds into this video, the person shows how to connect to the network printer you will. Then continue with the video to enter your IP address in a web browser. Your embedded Web server should look very similar to that of the video. He teaches to put in everything manually, but you should have an option to simply run both Wireless Setup Assistant, and I would say that the road if it is available.

  Once the printer is connected to your wireless network, you can stop watching the video. Now you can connect your Mac to your own network (you just connect the printer). After that click on the Apple icon, go to System Preferences, open Print Scan and proceed to add the printer using the symbol +.

  Hope this helps, have a nice day!

• Photosmart C4780 do not print

  HP Photosmart C4780 formerly operating wireless Mac OS x 10.6.8 now says offline and will not print. pleasehelp.

  What router?  What has changed?  From the front of the printer: [Scan] Setup > network > wireless network Test.  The printer is connected to your wireless network?

• Printe all-in-one Deskjet 3520: cannot reconnect my printer all-in-one Deskjet 3520 wireless network

  Hello!

  I'm having a problem to reconnect my printer on the wireless network. I unplugged for a few days and now it won't connect to the wireless network. I get the following message on the small screen on the IP of the printer: not connected SSID:N / A. I hope you can help me solve this problem.

  Best regards

  Mina

  Hi @Mina85 and welcome to the Forums of HP!

  I see that you are having connectivity problems.  I would try to help!

  I recommend you to perform a power reset.   Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also suggest this document on Center of troubleshooting wireless printing.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Photosmart c7280. wireless network.

  Photosmart C7280 has been active in a wireless network.  then the injury signal.  Diallo said that radio is on.  Radio has failed the test of work.  Is there a way to reset the radio.  or to solve this problem, if the radio is shot?  If connect us printer directly into the router instead of the rest of the network wireless access to the printer in this way?

  Thank you.

  Connect the printer with Ethernet is a great alternative and any computer can print, no matter how they are connected to your home network.

  If you want to try to reset your printer to retrieve the wireless radio: turn the printer off, hold it # and 6 keys while and shortly after having again.