Photosmart C7280 prints not photo tray

Similar Questions

• HP 6520 printer prints not photo tray

  printer cannot print photo tray?

  Moved from feedback

  Original title: printer hp 6520...

  Hello

  It would be more useful, if you answer these questions:

  1. what happens when you try to print from the photo tray?

  2 you get a specific error message?

  3 Windows operating system you are using?

  4 have had any changes made on the computer before the show?

  I suggest you follow the method provided to fix the problem.

  Method: Fix printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Alternatively, you can check the link for the HP support forum, which talks about the same issue.

  http://h30434.www3.HP.com/T5/Web-printing-software/B210a-unable-to-print-from-photo-tray/TD-p/546375

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Windows 8 drivers/software for the Photosmart C7280 printer/Scanner

  Hello

  I have a HP Photosmart C7280 printer/scanner. I have recently installed Windows 8 Preview Release and discovered that the software I have installed Windows 7 doesn't seem to work as well. On the Setup, the only butotn displayed is "Exit" - that's why I can not install the software and drivers.

  Are there solutions available for Windows 8 again (even if its only beta software - I'm happy to give it a go)?

  Thank you

  Jamie

  Hi Travis_C,

  Thank you very much for the reply.

  What happens to me with respect to scan using Windows' built in the analysis Assistant which is OK but that only gives me the option to save as a bitmap, .jpeg, .gif, .png or .tiff.

  Software of HP that I used in Windows 7 accepted save me the scanning to PDF which is what I want in this case. Is it possible to get this software to run in Windows 8? In addition, will you be brining a version of Windows 8 of this software?

  Thank you

  Jamie

• IP address changes each time the router loses power or is reset (Photosmart C7280 printer)

  I have a Photosmart C7280 printer wireless on my home network via a Belkin F6D4230-4 v1 router.  Whenever there is a power failure or the router is reset, a different IP address (in the range of 192.168.2.2 and 192.168.2.9) is assigned to the printer when the router comes back online.   This action requires each computer on the network (in total up to 9 computers) reinstall the driver and reset all the preferences print on each individual computer.   How can I assign a static IP address to the printer recognize the router dealing whenever it resets and not to assign a different address whenever the power goes off (too often in my area)?

  I hope I've provided enough information here.  If more information is needed for a good solution, answer and I can probably more information.

  Thank you

  John

  Set a static IP address is explained in Point E of the guide here:

   

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/eprint-apps-connectivity-troubleshooting-please-review/TD-p/572635

• Photosmart all in a photo tray the 3100 series printer will not print 4 x 6 photos.

  Original title: Photo paper tray does not load

  I have a photosmart all-in-one printer 3100 series and the photo tray pledge is no longer for me to print 4 x 6 photos. I have to hand it to pass in the main paper tray. Help, please!

  Hello

  For any other help, I suggest you because it seems to be a hardware problem with your printer, contact HP support.

  Link HP Support: http://WWW8.HP.com/us/en/support-drivers.html
  

• HP Photosmart 6521: Can find photo tray option when printing

  I bought a HP Photosmart 6521 today, part of the family 652 x.  I set up via the USB cable on my old Mac that is running Leopard 10.7.  The printer software is automatically downloaded and the printer set up like a dream.  Wifi link to my Wifi network configuration.  Can print from my new toptop running OSX10.9 no problem.  Problem is that I can find a print option on the laptop that allows me to choose the phototray.  I looked at the Mac and HP support forums, I downloaded and installed the software for the HP Photosmart 6520, no problem with the installation.  Still do not see an option on my computer to print from the phototray.  Any ideas is this likely to be a problem of HP or a Mac problem.

  Thanks for the comments.  I have mangaed to solve the problem.  See my post titled.

  Cannot select the photo tray on HP Photosmart 6520 from iPhoto OSX 10.9.5

• HP Photosmart C7280 Scanner not detected since Mac OS installed Sierra

  Hello

  I installed Mac OS sierra

  Since then, my HP Photosmart C7280 scanner is not longer detected:

  • In the system preferences tab scan
  • Image transfer can not find any device

  I reinstalled the device

  Print shops

  Scanner is connected to the router (Hello) by Eternet

  Scanner still works when you use a Windows 10

  MacBook Pro (retina, 13 inches, end 2012)

  macOS Sierra Version 10.12 (French)

  Here is a link to the HP support pages, please read carefully including the FAQ, there is a link to the HP scanning utility.

  Drivers for HP printers and scanners are downloaded on the App Store, have checked whether there are updates for your HP product.

  What OS did you go to?

• Photosmart c7280 will not keep Wi - Fi. said the radio but the radio works failed. repairable

  HP photosmart c7280 wireless printer has been working and connected to the router. Stop printing. The test report under collar "Radio on", according to Radio wireless working' fail. Is - fixable? The printer is only used wireless and not as part of a networked system.

  I thank very you much for your help and confirmation. I certainly could have been more specific about the problem and what I did. It was my first time, and you were very understanding.

  Thank you once again

  Sandy

• HP photosmart c310: print ONLY photos 4 x 6-3.7x5.2

  title says it all. I want to permanantly avoid any impression of all the photos of my printer that are not 4 x 6.

  I adjusted my settings of the printer to 4 x 6, added the photo tray in devices and printers, changed the Print 4 x 6 paper, changed the size of 4 x 6 print, cropped and photos up to 4 x 6 aspect ratio scaling. AND ALWAYS MY PICTURES ARE PRINTING OUT at 3.7X5.2... How to fix this? like really solve this problem?

  Hello Frustr8ed,

  So you say that you have a border of 1/4 inch around the photos of 4 x 6.

  You select the checkbox no margins for the release, and it still does not work?

  If Yes...

  How did you install the printer on your Windows 10 machine?

  To print from what application are you using?

  If you have installed the drivers yourself, I uninstall them completely and download the full Set featured from the link below and reinstall.

  PS_AIO_07_C310_FSW_Full_Win_WW_140_408 - 5.exe

  I would like to know if it works.

  PS: It would be unnecessary to completely stop the other paper size options to get the size from 4 x 6 to work.

• Photosmart C7280 will not scan

  I am running Windows 7, I just replaced a photosmart c6180 with a Photosmart C7280.  The C7280 will not scan.

  When I use the Solution center, the analysis shows a black with no document screen as someone forgot to turn on the light.

  I tried printing and scanning utility, he said I was missing a update on the Solutions Center.  I loaded it and I still have

  have the same problem.  The printing and scanning utility now works without error throughout.  Until I loaded the C7280

  software I removed all software C6180.  I did some research and found that I should use a scrubber to get rid of all the

  the previous software.   I found a list of what it takes in hp support forum 1380995 and followed to the letter.

  I still have the problem. I'm on a 32-bit computer.

  Thanks for any help.

  I guess that's it.  I want to thank you for all your help in this matter and stick with me.

  Thanks again.

• HP Photosmart c7280 printing Phototray

  When I try to print from the phototray, tells me that my selected paper size is not compatible with the size of paper in the photo tray.  I selected 4 x 6 paper and print formats as well as other options and the default printer, the 8 x 10 Board.  Any suggestions?  Thank you

  I had figured it out.  On the second print screen, there is option to iPhoto.  What to choose and an option for 'without borders' just as well as the amount and source.  If I select "without borders" he wil feel.  There may be better solutions, but it seems to work.

• Photosmart C7280 will not communicate with the network. The diagnosis says that the Radio does not

  Photosmart C7280 C5582A work through a MacBook via a Mac (OS 10.5.7) wireless router was working fine last week.  Today when I tried to print, the printer was stuck in the "printing page 37%.  When I checked the Print Manager, the printer was "slowed" and since I had a lot of trouble with this printer connection before losing, I did what HP told me the last time which was to remove the printer and then recharge it.  Except that this time, once the printer has been deleted, he could not find the printer even after I restarted the wizard and reinstated the SSID and WPA many times.  I have reset the printer and the router by turning off and disconnect power provided, but he still had the same problem.  When I ran the diagnosis, he told me: 'Pass on Radio, Radio work on failure, not plugged cable Ethernet-Pass' the rest of diagnosis is "not run" and other data on diagnostic tests are the Mac addess.  The Diagnostic says the "wireless radio does not work.  Contact HP support.  Unfortunately, it's evening Sat and HP support is closed.  Any help or is this printer dead?  (I spent a fortune on ink cartridges)

  It is indeed a hardware problem then.  I'm sorry.

  I always believe that repair costs would be better put towards buying a new printer.

  However, there may be options that I'm not aware where do not have access to.  This document has some support listed options.

  However, I recommend you contact HP support at the 1-800-474-6836 (to the United States and Canada).  Phone support can provide that more than an estimate on the repair or replacement of the printer with HP and you could compare this with the cost of a new printer.

  A new printer is under warranty and most likely to be an improvement on an older printer.

• Photomsart D110: HP Photosmart D110 printer not printing color

  Hello

  I have a Photosmart D110. I've been using cartridges remanufactured for some time now without any problems.  The printer was unused for some time, maybe a month. When I went to print a color page, there was no color in the output, only black.  I thought that the ink cartridge is exhausted. I changed the color to a remanufactured cartridge. Once again, no color.

  I did a basic test, like a color copy of the control panel to eliminate problems of color generated in software rendering.

  I ran the procedure on the printer control panel, clean print heads. After having done that, I don't always get no colour. Is there some

  other printer parts that can be cleaned to get the printer to print in color?

  Thank you

  Hi @mikemilw,

  Welcome to the Forums of HP Support!

  I see you are having print quality problems on your HP Photosmart D110 printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you don't have problems with your printer using remanufactured cartridges, until recently, looks that there could be a problem with the cartridge or the distribution of ink system.

  To determine if it is a hardware problem, I would use this guide:

  • The problems of print quality for the printer series HP Photosmart e-All-in-One (D110a and D110b)

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no can not solve the problem.

  If the problem persists and the cartridge is no longer under warranty, you can try the solution proposed in the video below.  Please use at your own discretion.

  Video: 7 ways to clean blocked clogged ink cartridges

• How to find the MAC address for photosmart c510 - printer, not zineb

  HP Photosmart c510 all-in-One

  Windows 7 SP1

  Printer bought 2 weeks ago.

  Printer wireless light is not on, not even flashing

  I use MAC address filtering on my home wireless router.  No problem adding the Zeen, I found that it is easy MAC.  Of course for the printer, it says "Printer not available" on the display of zineb, just below the zitoun MAC address.

  So I need to add the MAC address of the printer to my router.  I know that I can turn off filtering by MAC address and I hope that the printer connects, and then I can print the printer network settings, get the MAC, and then again turn on the filter and add the printer Mac

  Is this the ONLY way I can get the MAC address of the printer?  I'd rather not have to do that whole process, but will if I have to.

  I also wonder why the printer wireless light is not even blinking as he is looking for a network.

  Can anyone help?

  Print a network Test Wireless in the network menu on the front of the printer. It will contain the MAC address. Note that MAC filtering is not in that ensure that used MAC addresses are sent in the clear, and it is easy to impersonate a MAC address on a computer.

• Photosmart C4795 prints not (most of the time)

  I have a Photosmart C4795 installed on two computers, one with XP, the other Vista. Installation (with the Vista computer) went well, and all tests and some documents on the XP one and myself. After a few months, he started to give me a "document not found question '. I discovered that I needed to push hard enough to get the book far enough, but not too far. Now (on the XP computer) it says its printing, extracted in the document, then sits until I get an error message on my computer. I went through all the guided solutions and none worked. The XP computer is a HP Mini 1000, and HP update doesn't change anything.

  I got to work by sending the document again, and then cancel the print job wrong on my computer, and after that it was cancelled on the computer to cancel on the printer. At the point where the paper ejected I placed it on the tray at a time an inch away where I was told in the animations. Then he started on the second print job and worked (he stopped because I only had one page, but took over when I placed the book in the same place and pushed OK.) If the problem was in fact where I place the paper I want animations would show good positioning.

  Yet once again, if anyone needs help or clarification on how I did the job please answer.