PhotoSmart D110a Wi - Fi not working after move

I have a PhotoSmart D110a I connect to via WiFi (WPA security).  I've had the printer for several months. When I had originally, it put in place and connected as in a dream and worked without a hitch since the day 1.

This past weekend, that I moved into a new House, and once I had my network up and running again, the printer no longer works. I use the same router (Linksys E-series), with the same SSID and WPA password, and the same computers in the same configuration that previously worked in the old House. Needless to say that computers can connect to the Internet via the router wireless very well, and they are sitting right next to the printer (so there should be no problem of signal strength).

What is happening is as follows.  The printer claims that it is properly connected to my network, but no computers on the network cannot find the printer. I used the utility installation network printer wireless to join the network (it seems to find the correct network, no problem), and re-enter the password via the keypad of the printer utility, as well as using the method of the WPS (i.e. ' push buttons') to re - connect the printer to the network. Each time, the printer indicates that it is connected properly and is able to print a network status page. The IP address is of the order of 194.168.x.x.

But every time my computer or my wife (both machines to Windows 7 64-bit) laptop can detect the printer on the network. I tried to add a new printer using the native Windows program such as uninstaller and reinstalling HP, nothing helps. I have also tried to enter the IP address the printer claims into computers manually, but computers still can't find the printer.

I would be grateful for any help. It's pretty frustrating - for the affected printer, it works fine, but is not, and literally nothing has changed except the physical location of the equipment (same ISP, same cable modem, even wireless router, same computers, printer, even). Thanks in advance.

OK, well, are you sure that the printer and the computer are on the same network?  Probably aren't, but more strange things are are produced.

Have you rebooted the router and verified that the firmware is up to date?

Tags: HP Printers

Similar Questions

  • hp photosmart 6515 software does not work after installation, click on the icons on the screen and nothing...

    I have a fairly (1 month) new HP Photosmart 6515e bought at Costco, replaced the ink installation cartridges with new ones at Costco and had to reinstall the software, but now it does not work. the icons are on the screen but when I click on the hand that resembles a printer, nothing happens, I have uninstalled/reinstalled several times nothing helps, have you tried the USB connection or Setup wireless, still no go, have an edition HP Pavilion p6267c running Windows 7 Professional 64-bit, 8 GB of ram all drivers updated. Help!

    Windows is the problem, I did a ton of googling and many people have the same problem with different printers, etc. I'm wasting my time here, please delete my profile, thank you.

  • Photosmart C309a: Printer does not work after uninstalling and reinstalling to resolve the question of the HP Solution Center

    HP Solution Center has stopped working so I followed the advice of HP Support Assistant to uninstall and reinstall the printer.

    Cannot get printer to reinstall successfully, and more, none of the physical controls on the printer will work much longer, even the power of the power button.  Have to unplug the power off.

    Ironically, I found since the 'solution' through this forum to get Support HP Center works again by uninstalling a recent Windows Update, but do me no good now.

    I tried to uninstall and reinstall the software of the driver several times without success and I'm worried that the function keys not working not not at all on the printer indicates an internal matter that cannot be repaired.

    Anyone encountered this problem?

    Hello - Thanks for the reply.  Power the device power on and off has not fixed anything.  However, suspecting an internal firmware issue, I did a search on the web to see if there was a mechanism to reset.  I found a very useful website that describes three levels of resets, and the second level one (#6) fixed my problem.  I'm surprised HP doesn't have this information in its documentation or on its website.  I understand he has the potential to be used for the wrong purposes and perhaps make an irreparable problem, but it is clearly the solution to an inoperable Panel.  My printer was working fine before this problem and is now back to work again.

    http://resetprinters.com/three-ways-to-reset-the-Photosmart-Premium-fax-C309a-all-in-one-printer/

  • Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

    The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

    Hello

    Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

    Try this solution:

    http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

     

    Hope that helps.

    Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

  • Fingerprint reader not working after hibernation

    Does anyone else have the problem of the fingerprint reader does not work after hibernate? It is an intermittent problem, happens all the time, but frequently. Out of hibernation, it flashes, move my finger, nothing happens, flashing stops and the drive does not work after that. I have to enter my password of Windows and it does not work for all Web sites. Must restart to re-engage the drive.

    I'm on Win 7 Home Prem 64 bit with the latest drivers for the fingerprint reader and last update for Authentec software.

    So, here is the solution (s) found by Pokey and me:

    Option 1:  Computer properties, Device Manager, biometric devices, validity sensors, properties and the power management tab, uncheck the box "allow the computer to turn off this device to save power".

    Option 2:  Try deactivation and activation of the 'Credential Manager' service by going to control panel, Administrative Services, Manager tools of credentials.  Even if the credentials manager status is "started", stop the service credentials manager and restart it. Find more information here: https://support.authentec.com/Forum/tabid/318/forumid/49/threadid/600/scope/posts/Default.aspx

    Option 3:  Do both.

  • Keyboard does not work after authentication on the RDS Session host

    When you connect to the RDS through the access portal or app keyboard does not work after authentication on the RDS session host. Offline authentication works very well, past will guide you to the RDS host, then when you try to reset your password, the keyboard does not work.

    Has anyone else had that... ?

    Options (some better than others!) are:

    1. move all MS applications seamless

    2. have an application named "Reset your password" (or similar) which uses MS Seamless.then you can leave other applications, as they are

    3 disable authentication carried forward and implemented our service reset password instead so people reset their password before can connect you.

    4. use the full desktop instead of transparent

  • Safari does not work after installing macOS Sierra

    Safari and apple store does not work after installing macOS Sierra

    Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

  • iPhone 5 home button does not work after ios 10

    My 5 Iphone Home button does not work after update final IOS version of 10.

    The home button works on the first push to wake the phone but it will not open the phone the second button.

    I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

    You attempted to restart your phone?

    You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

  • Projector does not work after upgrade from Sierra

    My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

    Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

  • Certain things does not work after update MacOS Sierra on my Macbook Air 13 "Late 2010

    Drag between apps full screen, Mission Control and expose App are not working after update MacOS Sierra on my Macbook Air 13 '' end 2010. The problem because my macbook are not compatible with the current Mac OS or something else?

    Go to System Preferences > Trackpad and turn off and then on the ' shot between apps full screen» It should then work.

  • Ethernet USB adapter does not work after update to sierra mac

    Ethernet USB adapter does not work after update to mac sierra.

    Please solve this problem as soon as POSSIBLE

    Hello guatamshah,

    If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

    The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
    Reset the management system (SCM) controller on your Mac.

    https://support.Apple.com/en-us/HT201295

    How to reset the NVRAM on your Mac.
    https://support.Apple.com/en-us/HT204063

    If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
    OS X: about system information and System Profiler

    https://support.Apple.com/en-us/HT203001

    If she does not appear in the information system, see the articles below.
    macOS Sierra: If a USB device does not work

    https://support.Apple.com/kb/PH25343

    macOS Sierra: check your device's USB connection

    https://support.Apple.com/kb/PH25567

    However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

    macOS Sierra: Add a network service
    https://support.Apple.com/kb/PH25279

    If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

    Kind regards.

  • Screenshots do not work after the IOS10.

    Screenshots do not work after the IOS10. I've tried several apps and the iPhone and iPad.

    Help please.

    < re-titled by host >

    You hold down the sleep/wake button first, the fast, click the Home button?

    Have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

    Good luck!

  • Bitmoji keyboard does not work after last update iOS 10

    My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

    the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.

  • Why the highlighting of text in a PDF document does not work after you save the file

    Why the highlighting of text in a PDF document does not work after you save the file

    What application you use to highlight?

  • Delete buttons do not work after the update of 10.11.16.

    Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

    Any suggestion would be appreciated.

    Greetings, r.fromstouffville!

    It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

    Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

    Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

    How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

    Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

    On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

    Thank you for the communities of Apple Support!

Maybe you are looking for