Photosmart HP 6520 - printing black ink does not after having been replaced

Similar Questions

• P703w all-in-one printer black ink does not print right.

  When I print a black and white document, only a few impressions, but it's very light.  No words will print at all. I callibrated, cleaned print heads, went out and reinstalled the dell ink cartridges.  I don't know what else to do.

  Hi lionness91,

  White pages or impressions of light can be caused by any of the following reasons:

  • Ink cartridges are not installed.
  • Ink depleted.
  • Failure of the print head.

  Here are some steps we can try in this case:

  1. Reinstall the ink cartridges. If the cartridges do not seem to fit, make sure that the print head is installed and re - install the cartridges again.
  2. Try using a spare cartridges to reproduce the problem. We would be able to locate it to a cartridge impoverished if the replacement cartridge helps you to print correctly.
  3. Load plain paper.
  4. In the printer control panel, press menu .
  5. Press the arrow keys to scroll to maintenance, and press OK.
  6. Press the arrows to scroll to print head deep cleaning, then press on OK. Print a cleaning page.
  7. Press the arrow keys to scroll to align printerand press OK. Print an alignment page.
     
     Note: does not remove the alignment page until printing is complete.
  8. Select a higher print quality in the printer software. To select a better print quality:
     1. Your document open, click file print.
     2. The print dialog box opens.
     3. Click Preferences, Properties, Options, or Setup (depending on the program or operating system).
     4. The Print Options dialog box opens.
     5. On the Print Setup tab, select a higher quality setting.
     6. Reprint the document.
  9. Make sure that the Firmware is updated to the latest version from the link: http://dell.to/13SF1D7
     1. Make sure that you have selected the right operating system before you start to download the firmware.
     2. Print head needs to be removed and the cover must be closed before you upgrade the firmware.
     3. After the update of the firmware, install the print head and try to print.
  10. If the steps above do not resolve the problem, you can consider replacing the print head service kit.

• HP DV9291ea paved, works does not after having been in repair

  I have a HP DV 9291ea laptop. It is a model of 17 inches with a keypad on it. The problem is, when the NumLock key is turned on allows the keyboard number pad of the EEG. I recently had the motherboard changed by HP/Tarsus. I suspect that they do not have load the correct keyboard profile. (Tarsus) they said that should bring the laptop and he will fix it (free). I'll do it if no one can help me out here, is there a simple solution and permanent to this problem?

  I can get temnporarly around him as follows:

  • making sure that the NUMLOCK is off.
  • opening keyboard on screen (start > programs > Accessories > accessibility > on screen keyboard)
  • a keyboard layout will appears on the screen
  • I hold down FN button on the real keyboard and clicking the nlk on the on-screen keyboard button with my mouse.
  • the problem is I have is to support on the numlock key once again I'll have to go through the whole process again.

  Anyone have an idea what could cause this or how to solve this problem permanently?

  If you have a suggestion, please report it to me...

  This thread has been dead for a few years, but since I had to really search to find the answer to this question, I thought I'd share what has worked for me.

  In Win7, go to start-> Accessories-> accessibility-> Ease of Access Center, click on "Make the mouse easier to use" and uncheck "Turn on mouse keys".

  It fixed my problem on a HP G72 with numeric keypad integrated.

• Photosmart D110a: installed the new HP black ink cartridge and now the black ink does not print

  Just installed a new print 60xl cartridge to replace the one that was being ink. Now the black ink basically does not print. I cleaned the cartridges 4 times and run all Diagnostics pages. The black prints just a small piece of the upper part of the letters on the pages of diagnostics and in grayscale on the test pages.

  Hello!
  Welcome to the HP Forums, I hope that you are @janmacwill,

  I saw your post on the black ink does not print your Photosmart D110a and I wanted to stop making you share my suggestions. See the link below to solve the problem and if the black still does not print, contact HP (below) to see about a replacement unit.

  Printer prints a blank Page or doesn't print black or color ink for the printer series HP Photosmart e-All-in-One (D110a and D110b)

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up".

  to say thank you for my help.

  Have a wonderful day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.

• "I have a hp officejet 6500 e709 - black ink does not print." I have replaced the ink cartridge...

  "I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.

  Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  Try this first and post back to tell how you got.

• Printers HP 309 g - m: black ink does not print not and feel vaguely colors.

  HP 309 g - m question all-in-one printer: I replaced two of my color ink cartridges in my printer and now black ink does not print and vaguely printing colors. My ink level is all good (not even close to being out). HP printer cartridges. was working fine before. Help, please. Thank you.

  The here document has troubleshooting which can help solve the black does not print on your Photosmart c309.  Be sure to check the vents.  If the above does not resolve the problem, the message here can help.

• black ink does not print from new cartridges

  black ink does not print on photosmart 5514 running Windows XP. has crossed all suggestions online, changed twice same cartridge. What should do?

  Thanks for the reply.  I tried everything you suggested and it still does not work. Stayed for more than an hour on the phone with tech support and they also determined that it is a hardware problem.

• HP Officejet 6500 e709n: default alignment and black ink does not print

  Adapting the failure message.

  Black ink does not print.

  I chose clean print head - more than once.

  It took several alignings, printer status reports, wiping excess ink and so on.

  After a day or more, the HP6500 Officejet 6500 e709n printed ink black.

  Just a note:

  My color ink cartridges are very low.

  I just use black ink.

  Thank you for your response.

• black ink does not

  I have a HP C309G printer and the black ink does not work. The cartridge is new. and again, I replaced a new one with a second brand new and it isn't always black printing. I tried all the diagnostics tools and cleaned terminals. Help, please

  If you are still in warranty, I'd contact HP to help you replace heads printing or printer service.

• black ink does not work

  black ink does not work although the level shows that it is almost full

  Your print head is probably clogged.

  See the first two FAQ here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?infoType=FAQs&oid=58602

  Read this before you do anything: http://www.inkmagic.com/shopcontent.asp?type=Unclog_Epson_Printhead_Nozzles

  If you are adventurous and really mechanically skillful, see http://www.hardwaresecrets.com/how-to-unclog-epson-print-heads/

• black ink does not print HP Photosmart all-in-one

  I have new cartridges and after installation black will not print.  All other colors are pring.

  Hi Luv2dance728,

  Thanks for the reply and the information

  I suggest you start as a result of this document for Troubleshooting print quality problems, should be able to help you to get black ink works again. If it isn't, you can also try manually cleaning your print head to make sure there isn't a buildup preventing out black ink.

  If the printer still won't print black ink, it is perhaps an accumulation inside the print head or on the beak and to help solve this problem, you can follow the instructions in Bob_Headrick in this post on soak your printhead.

  If after these three things, black is not always print, it's a hardware problem with the printer print head and I suggest to call HP Support and inquire about their exchanges of and the trade program.

  Hope this helps, have a nice day!

• HP Photosmart Premium Fax e-Al: black ink does not print

  Black ink will not print. The cartridges has changed three times. No luck. All other colors work very well.

  All you can do now is to search on Youtube.

  https://www.YouTube.com/results?search_query=HP++C410a+PRINTHEAD

  Try here for answers.  Otherwise, the printer is history.

• Photosmart HP 6520: Printer Photosmart HP 6520 no black ink

  I'm having a problem with my printer.  It was not printing black ink at all. I tried several hours cleaning the print heads.  I tried the printer alignment.  I tried leaving off, remove the ink cartridges and leave it off for several days.  I tried to replace the ink cartridges.  What are my other options?

  The message here is a troubleshooting document links for the Photosmart 6520.  If steps it do not solve the problem, Please contact the HP Support, even if the printer is no longer under warranty.   If the above does not give satisfactory results so please post back here after contact you HP.

  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
   
  File number and phone number are displayed.

• Black ink does not print, message alignment is not

  Photosmart HP B210a more - black ink print do not. Put in a new cartridge even if there is still ink in another cartridge. A cleaned, check printing (only the color has shown), align printer has failed.
  Called customer support told them after that research problem that he said might need replaced print head. Gave me two phone numbers with an exhibit, waste of time with this option. I wanted to know the cost of replacement to see if it is worth)

  If you have already performed the steps in troubleshooting in the paper here I would soak the printhead as described in the post here.  Note that black does not print, alignment to fail.

• 7520 e-all-in-one black ink does not print

  Black ink will not print.  Tried to clean it. Replaced by the new cartridge. Other colors are fine.  Picture is fine.

  The here document has troubleshooting which can help solve the black does not print on your Photosmart 7520e.  Don't forget to check the vents, as shown in the third stage of six, solution.  If the above does not resolve the problem, the message here can help.