Photosmart HP 7520: scan a document to my computer

Similar Questions

• How to scan a document to my computer from my computer instead of the scanner itself?

  I tried the real scanner scanning and it says "Scanning error Scan of the computer" but how do I do this? I don't know how and I need to scan this document to my computer as soon as POSSIBLE!

  Read this and apply it to any model you have:
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-D110-scan-error/TD-p/370037

• HP Photosmart AIO 7520: Scanning under MacOS Sierra is no longer working.

  Recently upgraded to MacOS Sierra (MacOS 10.12).  Since then, my Photosmart HP 7520 is no longer will allow me to scan or save the scans to the computer.  The "Save" button is grayed out and cannot...  HP must send the updated drivers that resolve the problem very soon.

  Trash the older Scan Utility as he said? Who did it for me. Maybe try to restart after that? And restart the printer too?

• All-in - one Photosmart C8180: I'm unable to use the HP Solution Center to scan a document into the computer.

  I downloaded the updated driver that is located on the HP site for this printer. I uninstalled and installed this driver three times. I keep getting an error message when I use the HP Solution Center to scan a document to a PDF file. I restarted the program, rebooted the computer and reinstalled the software, as had been suggested in the error message.  I'm losing my patience! Anyone have any ideas as to the cause and the solution to this problem?

  Hi @AMDK,

  Thanks for getting back to me.

  This is a document of support that has alternatives for scanning when Windows 10 does not work with the software of the printer - Scanner without HP (Windows 10) software.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• No list of LCD on all-in-one printer, HP Photosmart C5280 to scan an image in my computer.

  When I turn on printer to scan an image to the computer there is no list of LCD.  The only way I get the list is if I turned off the printer and the computer.  Then reboot again.  How can I get the list of the rear LCD screen on the printer.  The operating system is Windows XP Professional.  I have not installed new software or new hardware.

  Sorry for the confusion. Power cycle is turning just off, wait 30 seconds and turn it on. Not uplugging, this is considered a hard reset. Just off tension.

• Photosmart HP 7520: Scan lost PC connection

  My HP Pavilion is connected to my 2.4 Ghz wireless network, as is my printer.  When you try a scan PC for my printer, I see the message "no computer."  This just started a few days ago. If I scan to email, it works fine. The printer, I reset the IP address and the password.  The computer prints to the printer via the wireless network. In addition, a laptop in another room remotely connects and prints well. I ran two times printing and scanning doctor.  Both times he concludes that the connection is good. Yet, no scanning of the printer.  The box in the toolbar at the bottom of the PC continues to say "Scan of the computer is currently unavailable.  From there I try enable and check the autostart box, but no change. I also downloaded the latest version of the software updated 12/15 no change. However, I found that if I use the HP Scan application on my PC now I have added to my office, it works very well (to the PC).  It's a little more "awkward", but it does the job. I'd rather eat the scan from the printer.  It was quicker and easier. Does anyone know why the printer is unable to 'see' the PC while it is connected to the network and all the functions the scanning started work on PC?

  Hi @Javaunoand welcome to the Forums of HP, as you know it is a good place to ask for assistance from members of the community! I'd love to help you with your Photosmart 7520. If I understand your description you can scan when you start scanning from the printer software, but when you try to scan from the front of the printer, the analysis did not make for a lack of connectivity.

  Be able to scan from the computer leads me to believe that the connectivity is not the root cause of the problem. However, I found something that might help.

  This document contains information on the possible causes of an interruption of the connection wireless, tips to avoid the question, tips to maintain a connection and troubleshooting to help you re-establish the connection Wireless on your printer; The printer keeps Wi-Fi connection.

  In addition to the solutions proposed in the document and you've probably already tried, please make sure that the printer is connected directly to a wall outlet, not a surge protector / power bar. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see:

  QUESTION:

  Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  It is also good if you already haven't, to be sure the printer firmware is up to date. This Firmware update improves and addresses the following issues:

  • Update the firmware of the modem FAX to avoid false failures FAX Test
  • Solves problems in networking that can cause the printer not responding
  • Improves the reliability of the cloud print
  • Improves the reliability of printing using HP ePrint and printable applications
  • Improves the reliability of the printer, automatic updates
  • Improves support for AirPrint™
  • Corrects the minor defects

  Update firmware to improve the functionality and performance.

  Disabling UPnP can be worth it too if the problem at this point. Follow the steps below to disable UPnP in the EWS printers,

  1 type the printers assigned to IP address in the Internet Explorer address bar. (you can get this report you would have printed everything by following the steps described in the document that I posted above)

  2. click on the network at the top tab

  3. Select the option of networking on the left

  4. click the UPnP option on the left

  5 Select the option 'Disable UPnP'

  6. click on 'apply '.

  And finally, I would like to disable IPv6 on the printer. This setting can sometimes cause problems. Follow the instructions below to disable IPv6

  • On the front panel of the printer, press the wireless icon, this is the second of the four icons on the top.
  • Navigate through the Wireless advanced settings menu and go to the IPv6
  • Disable IPv6

  Please let me know if that solves the problem, or if you need assistance. In fact, if this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. I'll look for a response on your part, thank you.

• Photosmart HP 7520: scan hp connects to the scanner

  I have a new MacBook Pro that came with installed Yosemite.  I think that HP Scan frequently does not connect to my scanner HP Photosmart 7529 using my wifi.  I get an error indicating that the scanner... is currently unavailable.  I called the service of HP and their only solution was to do the following in order: 1. turn off the router, 2 disable the 7520, 3 put the router 4 switch 7520.  Now, it works but it happens regularly and frankly is quite a pain and I'm sure is not how it is supposed to work.

  The scanner worked well with my previous MacBook Pro (OSX Lion).  The scanner also works through preferences, but that method has very limited functionality.  How can I get this problem?

  Hi @normka,

  Welcome to the HP Forums!

  I'm sorry to hear that your HP scanning does not connect to your HP Photosmart 7520 scanner. But I'm happy to help you!

  Please have a look through this guide to scanning, "computer no. has detected" or a Message appears "connection error" for HP Photosmart e-all-in-one 7520 Printer series.

  This guide may also help HP Scan software done is not open or stops responding in Mac OS X.

  I hope these guides will solve your problem and I thank you for posting!

• Photosmart HP 7520: Scan to email does not work

  Hello

  For the last few days I am facing problems of scan to e-mail function. It gives me an error - "failed to connect to Web Services. "Confirm access to the internet and try again. I checked access to internet, is turned off and turned back on, but everything is fine, except that scanning to e-mail still does not work.

  I also tried the suggestion of manual entry of the DNS server in the DNS address configuration, but it does not work.

  Kindly help.

  Kind regards

  Alok

  Hello @alok7,

  Welcome to the HP community!

  I understand that you have a problem with scanning to E-mail app on e-all-in-one printer, HP Photosmart 7520. I'd love to help you with this.

  Here are the steps I suggest to try everything first:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  You mentioned that you have already tried defining a manual DNS for your printer, DNS that you used. If you have not already tried so, I suggest to use primary like DNS 8.8.8.8 and 8.8.4.4 as the secondary DNS.

  If your web services connected, even if scanning to email does not work, you may need to reset the web services on the device.

  NOTE: Reset web services clears the custom email ePrint you have configured on your printer. Please be aware that if you have a personalized email ePrint, after doing this, you will need to configure again and will not be able to use the same address.

  1. press the Web Services button on the front panel.
  2. tap on settings.
  3. pressremove web services"and confirm deletion.
  This will bring you to the homepage.
  4. press on the icon Web Services , once again on the printer and go through the installation process.

  5. once the web service has been activated again, try to configure your scan to E-mail

  Please reply to let me know if these measures have helped to solve your problem.

  Thanks for posting!

  

• Photosmart HP 7520: Printing of documents on paper Photo Photosmart HP 7520 AirPrint

  When you use airprint from iPad/iPhone to HP printer, the document is printed on Photo paper and not Std paper - how do you want to chaange this defect? THX!

  Try to check the settings of the tray from the printer and check if this may help you, those are the only parameters that may be applicable to the side of the printer, AirPrint itself does not offer such control.

  Of the printer, click the configuration option, and then select Preferences.

  Select printer selected tray, then select main tray and confirm, now try to print and check to see if that can help you.

  Shlomi

• My HP C7820 all-in-one will not scan a document to my computer. The menu says no scan option

  How can I get to operate. The computer is using windows 7 Professional 64-bit

  Download and install the drivers and the newest comprehensive software on the HP website.  Try now.

• I'm trying to scan a document with my c3180 in word, so I can change it?

  I'm trying to scan a document into my computer with my Photosmart C3180. I t scans very well, but the winds into the high slot form image. I need to transfer it in Microsoft word, so I can change it & then print it out. I can't change it to a usable word document. Any help?

  Hi KenHallett,

  I would continue to use the OCR software that you downloaded if it does not work for you. You can also try to download the drivers and full software functionality from another computer to see if you have the same problem.

• HP Photosmart C7283 - cannot scan to the computer

  Sorry I'm not a guardian that someone made a joke, I'm just a frustrated user of HP

  Recently I had to buy a new office count runinng Win7/64 Home Premium SP1.

  The printer is configured as a member of the home wireless network.

  After reinstalling the HP software

  /PS_AIO_02_Net_Full_Win_WW_130_140.exe/

  and

  /CPE_SCAN_DESTINATION_UPDATE_hpcom_001_003.exe/

  I'm not able to scan a document into the computer, control printers screen nor the Hp Solution Center.

  I am constantly a msg of error with a 4, [(3,42,0) extended error]

  

  Can someone me work around this problem help pls

  S. stef, Israel Tel Aviv-Jaffa

  Just a frustrated user

  Thanks for your efforts, but nothing's done sofar.

  I found the solution elsewhere on this forum trying to decipher the code erroe himself.

  It's here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Windows-7-and-scanning-crash/td-p/283209

  The problem is in DPI of the screen.

  Sorry I can't give you any cudos at this time.

  Good bye

• Model D110a - why do solid when black pages copying or scanning. Printing from the computer works.

  Printer all-in-one Photosmart D110A. Printer works OK to computer when printing black and white or in color. But when using the scan or copy feature the printer does a solid black page. This just started recently. If I try to scan a document from the computer, the analysis that results is black Uni. I guess that it is a hardware problem. If this is correct, how can I get it fixed. Who should I call at HP for parts? Can I fix it myself or the printer fatally broken and that I should buy a new printer?

  Thank you for all that help you can provide.

  It sounds like the scanner lamp turns off.  You can't really repair or replace just the scanner lamp.  The way to resolve this would be to replace the entire printer.  Check your warranty here.  If the warranty is still good, you can join the 1-800-474-6836 technical support in the United States and in Canada, international users click here.

• Photosmart HP 7520: Two questions - one who changed the default for printing, saving another scans

  Recently, I had a problem when I go to print a document.  It is default to the fax.  I've never used the fax so doesn't understand why this should happen.  He always missed HP Photosmart 7520 series.  How to bring back the default?

  Next issue: I want to scan an image and save it to the computer.  I chose the 'computer' it attempts to analyze and comes up with this error: "no connection without a computer.  See the help documentation and the printer to troubleshoot the connection"sometimes there is a popup on the computer screen that says to choose my program photo but most of the time I just get the error message on the printer screen.

  It becomes crazy.  This morning is not allow me to do anything unless I go into the Printer Wizard and click on the "scan a document or photo.  This time, it will "select a shortcut, etc.  I click on the choice I want then and it scans and wonder if this.  I can't to point to the exact location, I want the image to achieve (my library of images).

  I think I'll have to do the work around like that.  At least I can now.

  I hit the "accept, etc." and sign off the coast.  Thanks for your help.

• Impossible to analyse on Photosmart 7520 legal-size documents.

  I use the top loader to scan my documents, but they intersect. Should I change some settings on my computer?

  Hello

  The document feeder are supported up to legal size according to its specifications:

  http://shopping.HP.com/en_US/Home-Office/-/products/printers/HP-Photosmart/CZ045A?HP-Photosmart-7520-e-all-in-one-printer&JumpID=reg_r1002_usen_c-001_title_r0001&lang=en&cc=us

  What app did you use to scan?

  You must set the original as legal size in either HP Scan or screenshot images.