photosmart HP B210a more fails to align cartridges

I just got a hp photosmart more B210a, but it fails to align the cartridges.

I have tried head cleaning happening.

Re try Align cartridges, but still does not work.

I use Windows 7 (64-bit).

Hope someone can help.

Thank you very much

Craig

Hello

Ink cartridges supplied with the printer you are using?
The test page that was printed after execution clean print head, it's because of the quality of impression as the impressions you see on this page? Try to follow this troubleshooting procedure described, click here.

If the problem persists after you follow these steps, call support hp at 1-800-474-6836 for any recommendation.

I hope that these help!

Tags: HP Printers

Similar Questions

  • Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

    For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

    Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

    So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

    Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

    Hi @kootstra,

    From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

    I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

    This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

    There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

    A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

    Reset the printer: what you need to know

    Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  • Photosmart HP B210a more: HP Photosmart Plus B210 missing Scan software

    Hi all

    OK, Ive problems (two hacks, printer malfunctions, 1 disk repair, etc. over the past months) my Mac for the last two days, I restored Mac OSX 10.10.4 successfully and everything is well save for my printer as indicated above. I didn't know the usefulness was eliminated when I upgraded to Yosemite and it was hogging my CPU with a processing loop that was killing my Mac (I call her Alice!...)). So, I did get them all today my research on what went wrong with these processes which lead me to upgrade drivers Max OSX Yosemite and tried troubleshooting through:

    (a) installation of printers, their uninstall through the system preferences/printers and Scanners to verify that the drivers are there, I installed via the using field list driver HP Photosmart Plus B210, who can confirm print successfully without any trail of CPU (I uninstalled the HP before this point utility).

    (b) tried to get into the system preferences/printers and Scanners / where I chose "Scan" in the window of the printer and it says "SCAN SOFTWARE does IS NOT INSTALLED" (see attached printer screen)

    (c) I installed the driver in the development of window for HP Photosmart Plus b210 series that SHOULD allow the printer and scanner to work from my window System Preferences/printers and Scanners, I've lived more troubleshooting try to import a scan of the system of preferences/Applications/Image Capture and preview also. The two scan attempts to import sent the same message, lack of scan software when I tried via the printers & Scanner on System Preferences window.

    So frustrasting as she is, I set up a test on the printer to use the port MMC to scan an image of the window of the printer to the MMC card, that I inserted in the printer and it worked to prove that the software of the printer works on scan, but not directly with my Mac. Printing software is confirmed later, brings back me to my Mac and his missing scan software.

    This seems to be missing and appropriate drivers that should make the impression (works fine, no trail of CPU as before) as well as scanning (missing software problem). Does anyone know how I can fix this and if I need to download software drivers or anything please provide your console if necessary with links to what I need...

    Thank you all... I should have logged at noon instead of 4.30... I just might have gotten something else after you fix this problem...

    Try to update the software by following these steps:

    Click on the Apple icon, then select about this Mac.
    Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

    Be sure to install any update HP or Apple, then check for the difference.

    If it persists, try manually install the package below. Tjen try to scan the image:
    http://support.Apple.com/kb/dl907

    If you're still having problems, try the HP Easy Scan application below:

    https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

    Shlomi

  • Photosmart HP B210a more - keeps saying lack of print head

    Help! I've had my printer for months and it has not yet printed anything. When installing, it came across with a message "lack of print head" and regardless of how many times I have re-seat of the print head it will not go away. I tried to clean it, turn off the printer and wait, restart, nothing works. Please help me!

    Try to connect your printer to a different power source, directly connected to the outlet, to deny the problems of power.

    If the same error message as well, contact the call center of HP in your region, as the printhead is damaged and need a replacement.

  • photosmart HP b210a more does not connect to the server.

    I installed this new printer a few days ago and it works wireless laptop problem, phone and pad. So now all of a sudden I can't print wireless. The printer says does not connect to the server if the wireless works. The wireless working on my computer too. Repeatedly, I installed the installer hp for Lion, I installed the drivers from HP on the Apple site.

    Technical specification:

    iMac running Lion

    Mac Book under Snow Leopard

    iPad

    iPhone 3 g

    AT & T Uverse router

    Thanks to anyone who can help!

    The router rebooted, reinstalled again and it seems to work? Don't know what went wrong.

  • My hp C309g printer range fails to align. just changed the ink cartridges. Works on Windows 7.

    has a great. My son worked hard a yuear there to get this printer working... He changed the cartridges of ink a couble of day and now it is not printing.  We tried to realign the heads but it come as "Failed" to align on the screen... Please any suggestions.

    Ok.  Once remove you / reinstall the print head, try to clean the printheads via the printer software.

    If it does not, the new print heads are about $95 or you can taste (unofficial) cleaning procedures listed on these forums.  Search for them.

  • Printer insists, to "align cartridges".

    Hello

    I have a HP Officejet 6500 E709a on an iMac OS X 10.6.8.  Everytime I turn on my printer, a message appears on the front of the screen of the printer, the "load paper - plain white paper in the main tray and press OK.»  Of course, I already have the paper loaded.  Once I press Ok, a message appears, "alignment cartridges... Please wait... this process will take about 7 minutes."  I'm not sure whether if I caused this or not.  One day, I decided to clean the printer heads myself BEFORE this error, because it's been a while since I had cleaned their.  Then, I loaded a black ink cartridge.  Too little time after, this error started.  I even tried to install new software driver for this printer several times subsequently.  Is there a way to fix this, or is it a permanent error?  I'm more covered by a warranty HP, so HP customer service may not be able to help me.  For the moment, to scan/fax, I just press the Cancel button continuously until the message goes.  However, I can print without having to clear this error here, and the quality of black ink is fine.

    Hello

    As a response to your question, as a color all-in-one device color printer maintenance requires in order to operate the device as expected.

    Kind regards

    Shlomi

  • Photosmart Plus B210a ink level by computer will not work

    I have Photosmart Plus B210a. Running Windows 7.  The function to determine the level of ink by computer suddenly won't work.  The option will not even appear in the devices & printers screen.   I install only the HP cartridges.

    It is possible, it was lost if you did an update of the Hp software. To get the option on your computer, you can download the latest drivers. Don't forget to uninstall and re install with updated drivers. When pilots selection select features complete drivers.

    Updated drivers

  • problems with the HP Photosmart Plus b210a Wireless

    Good evening. I have some problems with the HP Photosmart Plus b210a. Precisely after printing when the printer is not detected on the network and is defined as "not available". The works remain in the queue and the printer is turned on and on again unable to work in print queue.
    The printer on the network report says "Success" for each element

    It is the same for the iPhone 4 and iPad 2

    The system is composed of:

    MacBook Pro 13 "with OSX 10.6 update now
    Connected to the Internet router Wavewgate Digicom3G150 with key
    HP Photosmart B210 Pro Aio series with ultimate drivers Apple

    Network:
    D4 HW (MAC) address: 85...
    192 168 123 102 (non-static) IP address
    DHCP configuration
    Authentication: WPA - PSK
    Encryption: Auto (AES / TKIP)

    The same system also use a PC with Windows Seven Home, but in this case, the printer works PERFECTLY! Even with the iPhone and iPad!

    Thank you for the help that you can give me

    OK, I will assume that the connection of the printer to the router and the router are OK for 3 other devices work correctly.

    Make sure that your OS X is healthy:

    1. download and install OS X Combo Update.
    2. download and install the printer drivers HP from Apple.

    After that, you can reset the printing system once more.

  • Error message "press ENTER to align cartridges".

    PSC 2210: After having installed the new cartridge, message "press ENTER to align cartridges" will not disappear. Said HP blog Setup and hold and press Options, which does not work. HP technical support will not answer me and only offers to sell me a new printer for $99.00

    Now I am answering my own question. HP site does not say that the Options buttons and Setup must be kept pressed at the same time not independently. Now it works. It's all the support Tech had to say instead of trying to sell me a new printer and they would not. Nor would they say even here is the answer, pay US $20.00.

  • align cartridges HP psc 2175

    To change black cartridge - the "Press ENTER to align cartridges" message.  I can't find a way to clear the message, I think I've tried everything...  Copy / scan functions do not work - print works very well.  Suggestions?

    1 try to remove the ink cartridges.

    2. close the printer's front access door

    3. turn the printer off.

    4. disconnect the power cable on both ends of the printer

    5 wait about a minute or two.

    6 reconnect power cord then turn on printing.

    7 wait until you will be asked to insert the ink cartridge.

    8 insert the ink cartridge when you are prompted, and then follow the on-screen instructions.

    9. Insert plain white paper and follow the on-screen instructions. It should align the printer.

    Please let us know if you have any questions.

  • HP Photosmart Plus B210a won't come out of power save mode.

    The printer works fine until it sits awhile and goes into 'power saving mode'. Nothing it comes out that mode except unplug the power cord and back running the printer. I disabled the: power saving mode and have had no problems. Is there a fix so I can turn the: energy safe mode: back on?

    I have a HP Photosmart Plus B210a and it's brand new. I am using Windows 7 32 bit and I get no error message. When I ran the HP print utility, all checked in green except when I tried to print a test page and test page remained in Quebec and a red X.

    Technical support told me that the problem was a hardware problem. They sent me a new printer!

  • Ink system failure code... 0xc19a003... Photosmart Plus B210a... Help

    I have a HP Photosmart Plus B210a printer code

    My problem is the following: -.

    The printer screen is display the following information:-the 0xc19a003 ink system failure code. Please turn printer and then turn it on again.

    I tried several times with HP solutions. Nothing worked and I just keep getting the same results. Ink system failure... 0xc19a0003... Please turn printer and then turn it on again.

    Can anyone help me please with a solution.

    HI VTHapa,

    I appreciate your help. After trying to solve my problem with your suggestions and the HP suggestion, nothing worked. So I abandoned my printer and bought a new one.

    Now I don't know how to remove my ad?

    Scooter

  • Printer HP HSC 950 "Press to Align cartridges" loop - how to print?

    Hello

    I have a printer all-in-one from HP HSC 950 that always returns to the display of message "Press ENTER to align cartridges", even after a complete print alignment is performed and seems fine.   Beyond that, I can't print anything.   I lost a lot of ink and time trying to get past this message.  Can anyone help?

    I encounter this error when the printer is plugged into a laptop running Windows XP, or when it is connected to a router that accepts printing from the computer i - mac OS 10.4.   The link below, you should get to the HP page with the product that I write on the subject.

    Thanks in advance

    http://h10025.www1.HP.com/ewfrf/wc/product?product=60259&LC=en&cc=us&DLC=en&JumpID=reg_R1002_USEN

    The solution was to replace the color cartridge, as suggested in a previous post Bob Headrick.  Thank you, Bob!
  • HP Photosmart Plus (B210a) - part way freezes by printing

    Product name: HP Photosmart Plus (B210a)

    Operating system: Windows 7 (64-bit)

    I recently had experinece problems when you try to print. The printer starts printing the paper, freeze for a minute or two and then spit the sheet on incomplete. He will then proceed to print another sheet, outside, with black strips, running through it, either with a series of letters and symbols on the top. It seems very occasionally to print without any problem at all.

    To try to resolve the problem so far, I've updated the software of the printer, it seemed to have no effect, and I ran printing HP and doctor scan, but it can't seem to pick up all the problems. This is a wireless printer that is connected to a network, it was connected to and has worked previously.

    I hope someone can help because I'm getting very frustrated! Thank you in advance.

    Hi A0805_JKS92,

    Welcome to the HP Forums, I hope you enjoy your experience!

    I understand that the printer is not printing correctly.
    I'll be happy to help you.

    I turns off all startup programs to make sure there isn't something blocking the printer from printing. Click Start, in the search box type to perform, enter, and then type msconfig, click OK.

    Click the Services tab to select the hide all Microsoft Services check box. Click Disable all, and then click OK.

    Then click on the tab at the top of the start page. Click Disable all.
    Restart the computer.

    Disable any antivirus software.

    Try printing right now to see if that makes a difference.

    Then, return to msconfig and enable all the Microsoft Services and enable all Startup tab turn on the Antivirus software.

    I think that this will provide a solution to your problem. Thank you.

Maybe you are looking for

  • Is WiFi adapter supports WPA - PSK on Equium A100-147 encryption?

    I decided to buy a satellite A100-147, but I would like confirmation that the WiFi adapter supports WPA - PSK encryption. I can't find confirmation anywhere. My guess is that he does, it's a recent machine, but I would be sure. Thank you once again.

  • Background music on DVD is stronger than the word.

    When I play a DVD of some of the music seems perfectly normal however when a person speaks, I can hardly hear them.  I'm able to increase the volume to hear them, but when something else comes on it is much too strong. I checked all the speaker plug-

  • G6 No. C4M14EA #ABU Pavilion: pavilion laptop g6

    When you try to print it tells me that the - series HP Envy 5530 - printer is offline, which is incorrect. Printing is made possible by her disconnect and reconnect the power to the modem when printing takes place. This problem appeared only in the l

  • Pavilion 15-e008sv: what is the max ram

    Hi, I have the hp pavilion laptop computer 15-e008sv and I would like to know the max ram for this one! Thank you!!!

  • the user privileges

    HelloI am new to oracle sql, I need to know what privileges must be a user to connect and select/delete the lines for a specific table in another schema.Thank you