Photosmart ink advantage - airprint does not work

Similar Questions

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• HP Deskjet Ink Advantage 2545: HP Deskjet Ink Advantage 2545 does not print Cyrillic

  Hi all

  My HP Deskjet Ink Adnavtage 2545 does not print Cyrillic characters, for example: България. I installed the latest drivers from the link below, but the problem persists: http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-Ink-Advantage-2540-All-in-One-Printer-ser...

  I will be grateful if you help me to solve this problem.

  Hello

  I called the support in Bulgaria, but the cause has not yet been identified. :-(

  Update (10/03/2015): the problem was caused by the original-black cartridge - which came with the printer. It has been cleaned and now everything works fine.

• Photosmart 7520: Printer Wizard does not work on Windows 10

  My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

  Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

  Now all I get is a printer configuration screen that has 3 options

  -connect a new printer,

  -convert a USB printer wireless, and

  -Add new software.

  How can I get the correct printer assistant screen to run?

  Thank you.

  Hi @AJA3,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

  I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

  It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

  I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

  If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

  Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

  I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

  At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

  I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

  I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

  I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

• during installation of HP DESKJET INK ADVANTAGE 3525 does not recognize original black print cartridge

  Hi all

  during the installation of my new printer HP DESKJET INK ADVANTAGE 3525 I discovered, that the printer does not recognize the new black ink cartridge. The black cartridge, as well as the other colours, is original and it was packaged with the printer.

  Thanks in advance for your help and have a nice day!

  Hello @Hugh_G,

  Welcome to the HP Forums

  I'm sorry to hear that your printer does not recognize the black cartridge, and I am happy to help you solve this problem!

  Are getting you any kind of error message about the cartridge? If this is the case, please follow this ink cartridge problem: "Not compatible ink cartridge" or "Ink cartridge must be replaced" message for HP Deskjet 3520 e-all-in-one and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series document and, hopefully, the printer will recognize the cartridge after these steps.

  Maybe that's not the question if you thinking maybe that black ink is not printing? If this is the case, please try these steps printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series for a possible solution

  I would like to know if these steps help and what happens after trying them and I hope that we can get things working for you!

• ePrint on iOS 5.1.1 5.0.1 can't find my wireless printer / Airprint does not work

  Printer model: HP Photosmart 5510

  Model of router: Linksys WAG120N

  Devices and operating system: the new iPad, iOS version 5.1.1

  iPod 4th generation, iOS version 5.1.1

  ePrint , installed on both devices, version: 5.0.1

  Application Description: I can print "Via a local Wi - Fi network: easily identify HP wireless printers available on your network."

  This doesn't seem to work on my network described above. whenever I want to print a document, it requires activation to the ePrint online service. I have this, provide the email address printer, but in this case, the document must be printed is sent to HP ePrint Center then back to my printer and not directly through WIFI.

  In addition, Airprint works only onetime after I restarted my printer, so it is no more.

  I'm just disappointed with all combinations.

  Can you please support me in this issue?

  Thank you.

  Hello

  To print from an iPhone using HP ePrint or Airprint network must use the multicast Apple Hello service depends on.

  According to similar discussions, it seems that the multicast is not supported by the specific router model:

  http://homecommunity.Cisco.com/T5/cable-and-DSL/WAG120N-wont-AirPrint-to-HP-printer/TD-p/371737

  https://discussions.Apple.com/thread/2656668?start=75&TSTART=0

  It seems to be the lack of support of your envoirnment network.

  To ensure my suspicions, try please perform following steps:

  1. On the printer, press the wireless icon, and then press the settings button.
  2. Select Restore Defautls network.
  3. In the same menu, tap on wireless and make sure it is set to.
  4. Since the iPhone, go to settings.
  5. Tap on WiFi.
  6. Select the printer SSID (will include 5510 or B111 in the name of the network)
  7. Allow 2-3 minutes to establish the network connection, now the iOS device directly connected to the printer.
  8. Now try printing using HP ePrint or Airprint.

  I think that you will be able to print without problem... which means the problem caused by the router...

  I recommend you contact Linksys support and check for any possible solution (e.g. Firmware update), however, it seems that the router does not support the requirements of connectivity Hello...

  Kind regards

  Shlomi

• Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

  I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

  Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

  I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

  Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

  So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

  My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

  Here is what I tried:

  I had hoped he would ask me for a new name / password, but it did not.

  Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

  I pressed the wireless button that has the flashing blue light and nothing happened.

  I pressed the button, don't know what it is, but it has a white light, and nothing happened.

  I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

  Y at - it everywhere where I have being a novice could get instructions on how to get this working?

  I appreciate any help you can give me.  Thank you.

  Hello

  I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
  
  Kind regards.

• HP Deskjet Ink Advantage 3525 does not connect to the server

  Hi guys, I am exhausted after a week of trying to solve the problem. I am printing and scanning over wifi without problem, but there is no way to activate the print server (ePrint). The printer screen (and also Web page) explains this printer could not connect to the internet. I tried to reinstall, open ports on the router (WRT54GL) and millions of other web solutions. I don't have a proxy on my home network. Someone has solved this problem, please?

  Hello

  Try to set a manual DNS and check if that can help you.

  Just follow the same steps as shown below from the HP Deskjet Ink Advantage 3525 software:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-6520-scan-to-email-connection-problem/m-p/2549789/highlight/true#M58522

  Shlomi

• AirPrint does not work all of a sudden

  Yesterday morning my HP110a stopped working with airprint. iPad and iPhone 4 with iOS 4.3, having worked well before, suddenly can't find the printer on the network. Using Safari, I can access the Web page of the printer of the iPad and the iPhone, my MacBook Pro detects the printer with Hello, ePrinting works fine - but AirPrint stubbornly refuses to work.

  I have been through every troubleshooting - active network, checked all the software / firmware is up to date, same update iOS 4.3.1 without result.

  To print from the iPad is urgent - what can I do?

  To solve this tonite! Changing the protocols of Internet printing setting off on, suddenly the printer can be found via AirPrint. Interesting! Why not make HP it clear that PPI must be on for AirPrint working. I lost several hours trying to resolve this issue.

• Photosmart D7460 with wireless does not work with Win. 7 ultimate connected to the router

  I have a desktop HP upgrade to Windows 7 Ultimate and the new HP printer driver has been downloaded and installed. It seems to print via the server message/controller but is never to the printer or to a file if this opton is selected.  I have also a laptop on group residential network running home premium 7 and same driver.  It works very well to the same printer.  The printer is connected to the wireless router as it is the laptop.  The office is connected to the router.  Any suggestions appreciated that I'm obviously above my head.

  Thank you

  Jackie Draffen

  NO I haven't installed upgrading to windows7 after problems with her 7 installed.  I think it worked a little but only showed 3 ink levels and other problems

• OfficeJet pro l7480 ink new cartridge does not work

  Hello world

  the magenta cartridge from my all-in-one closed his ink, or so it seemed. Even though I replaced this cartridge (shaking he seems to have a lot of ink inside) with a new one, the officejet still tells me to replace the magenta cartridge because it is empty and the printer cannot print. I have always used hp original cartridges.

  I'm looking for advice to solve the problem.

  Thank you very much.

  Max

  Hi Max, thanks for getting back to me.

  It is strange that the inks are behaving this way.  If you have already tried new cartridges, the best recommendation I can do would be to contact HP directly. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide.

  Thanks for posting on the HP Forums.

• Photosmart 7525 Printer Wizard does not work with Windows 8 Pro

  Just installed the 7525, networking and it. Print, fax, etc very well, but when I click on the Printer Wizard, Notepad will open with two separate screens, HPSPProgress.hta, and HPSolutionsPortal.hta with many sequences of text I do not understand.

  I have a Toshiba Satellite P755-S5278 upgrade Windows 7 to Windows 8 Pro.  I know he kept Windows 7. However, 8 is here so is there a solution?

  Thank you

  Hello

  Use the hotfix or follow the steps listed below, if the program the error described resolution:

  http://support.HP.com/us-en/document/c03640384

  Shlomi

• 3545 Deskjet ink advantage: my 3545 printer does not work

  I just brought my printer., after the installation, does it take almost an hour to print the page test, plus his watch this error code., I am not able to print additional pages, the scanner also does not work... can anyone please solve my problem

  Brand new? It is broken. Take it for a full refund or a replacement.

• hp photosmart 6515 software does not work after installation, click on the icons on the screen and nothing...

  I have a fairly (1 month) new HP Photosmart 6515e bought at Costco, replaced the ink installation cartridges with new ones at Costco and had to reinstall the software, but now it does not work. the icons are on the screen but when I click on the hand that resembles a printer, nothing happens, I have uninstalled/reinstalled several times nothing helps, have you tried the USB connection or Setup wireless, still no go, have an edition HP Pavilion p6267c running Windows 7 Professional 64-bit, 8 GB of ram all drivers updated. Help!

  Windows is the problem, I did a ton of googling and many people have the same problem with different printers, etc. I'm wasting my time here, please delete my profile, thank you.