Phtosmart Premium c410a: photosmart will analyze APC?

Similar Questions

• Photosmart Premium C410a: Photosmart C410a does no copies.

  My printer has stopped making copies of hard documents placed on the printer screen.  It still prints from my computer.

  Hi pcmck,

  When you turned it on and lift off the cover, is the bulb scanner/copy up on the side? If this isn't the case, then it is not getting enough power and you need to try a different wall jack, or there is a hardware failure.

  You can also try a reset from power - just unplug the printer for a minute or two without off with the switch, and then connect the in the.  If that doesn't help either, you can call the HP support by phone for the options of upgrade/replacement...

  You can contact HP support at 1-800-474-6836 North America or find the local number for your country here: http://welcome.hp.com/country/w1/en/support.html please look for the category 'technical support after you buy '.

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• HP C410a Photosmart Premium: bad printing quality on the picture

  Printer HP Photosmart Premium C410a, just replaced all THE cartridges (genuine HP) - he always tells me cyan and magenta are weak, but the test page printed fine and I cleaned the print heads. When I print a picture (of the program Apple Photos) the ink begins to blurr and run. It is a new problem, all worked well.

  Hello and welcome to the community of HP @BevA1,

  I understand that you encounter some problems print quality when you print pictures of your HP Photosmart Premium C410a. I will do my best to help.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Problems with print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e)

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• HP Photosmart Premium C410a: printer not printing black

  Printer prints is not black.  Cleaning print head.  New cartridges, printhead replaced, will be always not print black.

  Try these videos Youtube here.

  https://www.YouTube.com/results?search_query=Photosmart+premium+C410a+print+head

  Find out more if necessary.  If no joy, your printer is toast.

• Photosmart Premium C410a: driver installation fails repeatedly wins 10

  Network printer on the local wifi network.  Became the busy error scan after reclassification of Win7 to Win10, did not know that was a problem known to HP, so uninstalled the printer drivers and downloaded the latest version of the driver, went to reinstall.  It happens on the screen "I agree", and when I click Next, it flashes "Remove HP software" and closes.  Tried several times.  Checked if it has been set to the private network, it is.  Tried the HPPrinterInstallWizard, it downloads the same driver, take me up to that point, and when the installation fails it curls back and begins to do the same thing everywhere.  Tried the HPPrinterandScanDoctor, it does exactly the same thing.  And of course, HP don't talk to me because my printer is not new.  I even tried the old software CD (2012), it loads and says: "Welcome Back! Click here to exit. »

  Hi @pgd1,

  Welcome to the HP Forums!

  I see that you have trouble to install the printer HP Photosmart Premium c410a on Windows 10. And I'm happy to help you!

  To check the printer hardware is functional, are you able to make copies using the printer scanner glass?

  You see error messages on the display of the printer?

  How is the printer connected? Wireless, Ethernet or USB?

  In the meantime, try the following steps in the following order:

  • Uninstall the software. Uninstalling the printer software. (Only do it if you think that some software are always installed.)
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows.

  Hope that these aid measures and hope to hear from you soon!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP PHOTOSMART PREMIUM C410A COPY SURFACE GLASS OR FEEDER TRAY

  HP PHOTOSMART PREMIUM C410A, WINDOWS 7, DON'T COPY OF SURFACE GLASS OR TRAY FEEDERS.  DO NOT DISPLAY THE ERROR MESSAGE.  NEED HELP

  Hi jcollis217,

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• Windows Vista Home Premium - Disk Defragmenter will analyse but not defragment

  Windows Vista Home Premium Disk Defragmenter does not work properly.  It will analyze the disks and say they need to be defragmented, but when I click "Defragment now" he begins to analyze again.  It keeps analyzing and telling me to defragment however it defragments never really.  Please PLEASE HELP - it's so frustrating. Thank you =)

  Hi islgrl10,

  Alternatively, you can also view the partition on which you try to run disk defragmentation, it may be corrupt or have some bad sectors that might have prevented disk defragmentation utility runs successfully.

  To check for errors on a partition,

  1. click on Start button, and then type command prompt and run as administrator.
  2. in the command prompt, type chkdsk /f and press to enter.
  3. When you are asked to plan the check disk on the next reboot, type 'y' or 'Yes' and restart your computer to run the utility chkdsk on your computer.

  Kind regards
  Arona

• My Windows 7 Home Premium 64 - bit will make not a disk defragment!

  My Windows 7 Home Premium 64 - bit will make not a disk defragment! Can anyone help?

  "Disk Defragmenter is currently using custom settings created by another program."
  RE - issue of Tom Ferguson - "computer maintenance program."
  Including Norton or any of the other AV that has 'optimize' tools
  It's may be in conflict with the Windows Defragmenter?

  "The drive has 318 439 Go free."
  My understanding is Win7 Defragmenter needs 15% free space and you
  are a bit lower than that.
  Normally, you would get a message saying that you have enough free space, but
  who cannot occur due to the other error message.

  "Or is the only alternative-3 rd party software?
  You can try AusLogics Disk Defrag, but still 15% needs to free up space.

  «Is it possible to uninstall and reinstall MS disk defrag»
  You cannot uninstall or reinstall defrag Ms.
  ... Just a guess. If it were somehow corrupted you might replace the .msi file
  with a new copy,

  .

• Photosmart Premium c309a series - will print but scanning and fax are not in printers and Fax preferences

  Any expert out there?

  I already posted this problem.  I deleted Photosmart Premium C309a [OEFC74} of the preference of the "Print and Fax" system on my desktop Mac running OS 10.6.8.]  I deleted it to correct a mistake, "Printer offline", when the printer was offline but would not.

  I then added in Photosmart Premium C309a as instructed.  He has fixed the "printer offline" problem, but now the scanner icon disappeared from "Print & Fax" and I cannot scan documents.  I've always had to scan from my computer, not the printer itself, but I've lost this ability.

  Before deleting the printer in the printer list, I had two icons of the printer: Photosmart C309a series [OEFC74} and Photosmart C309a [192.168.1.5.]] (Fax) listed.  Now, I have one with a different designation, simply Photosmart C309a series.  I had to spend two laptops to this designation of printer in order to print using these laptops (all Macs).

  The all-in-one printer is connected wireless via a home network using a wireless router.

  HOW to bring back the ability to scan?  I spent hours on this forum without finding a solution.

  Thanks for any help.

  Radio of your printer may have indeed failed, and it is not uncommon with this model.

  Try to reset it to put off the printer, then hold him down # and 6 keys while and for a few seconds after I turn it back on.  If the radio is just when, this should fix it.  If she suffered a hardware failure (such as a circuit board) cracked, this will not fix it.

  With this model, you can also connect it to your router with an Ethernet cable and have the same functionality available for all devices, including those who have connections to your router wireless.

• HP Photosmart Premium C310 series will not power

  Printer hp photosmart premium C310 went offline and will not print. Usiing Window 7 64-bit OS. Had no problems until I tried to print the other day and a message came saying printer has been disconnected. I tried printer, computer and router wireless off. And reinstalling the printer software. Now when I try to activate the printer back on it's stuck at the 'initializing' on the printer screen. This process has removed the printer from my computer and now since the printer will feed properly, I can't reinstall it. Help, please. I need my printer ASAP for my college courses.

  With the current of the printer, unplug the power cord from the wall outlet.  Wait 10 minutes and plug it back and check.

• HP Photosmart Premium C410a: leading edge margin problem

  The leading edge of each document prints a quarter inch less margin than it should. Have tried many things without success. Apparently, something slipped a quarter inch into the additional paper tray, but I have no idea what. It's one great printer in all other respects.

  Hey @sandlapper,

  Thanks for posting in the HP Support Forum,

  I understand that you have a print quality problem when you use your HP Photosmart Premium Fax e-all-in-one printer - C410a.  I would like to work with you on this.  I have a few suggestions that may improve the quality of your print.

  I recommend you to make a copy of the front of the printer in order to isolate the issue further. If you have the same problem when copying, then likely the issue-oriented material.  If so, click here and try the solutions that apply to your installation.

  If your printer has a decent copy less error of margin is probably the printing problem you see is related software. In this case, try the following:

  1. Uninstall the printer - click here for instructions.
  2. Fix permissions of the disc on your Mac - click here for instructions.
  3. Once you have finished running the utility above, restart your computer.
  4. Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

  * edited for grammer

• product hp photosmart premium c410a

  I have a HP Photosmart Premium all in one C41a.  I am not able to record on eprint.  I have my printer e-mail address.

  When I entered my name and your email address, email address am I to go to and what password?  I tried different ways and then when I click on create account, it does nothing.  What should do?

  Hello Lainey04,

  I understand that we are not able to save the ePrint printer.

  I will do my best to help save the ePrint for you printer.

  The following link will take you to the ePrint installation web page.

  http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/setting-up-mobile-printing.html

  It seems that you have left to set up your ePrintCenter.com account.

  1. When you go to http://www.ePrintCenter.com , click on the blue button panel and on the right, then click on create an account link in blue.

  2. the account will need to enter your first and last name, nickname, email address and password.

  3. There are two checkboxes, one is for updates, offers and the new ePrintCenter and the other is to sign up for Snapfish.

  4. click on create account after you have entered information.

  5. your account opens with a window asking for the code printer print after that activation web services on the printer.  If you need the code once again, press the ePrint on the front panel of the printer > down arrow > ok on the print info page

• Can not scan wireless Photosmart Premium C410A

  My C410A runs well wireless for all functions except scanning. It will not respond to a command to scan wireless. Support long sessions with HP and Microsoft Netgear (mfr-router) have failed to identify the source of effective workaround of prob. has been to use the USB connection for the scan only function. Everyone knows the inability even to scan wireless?

  Problem solved after three hours on the phone with HP technicians yesterday and today. Bottom line: the signal from my router Netgear Wireless-G (WGR614v10) is not enough to support stable wireless scanning, and therefore the permanent solution is to scan to my HP C410A only via the USB connection. A secondary issue was my inability to scan from my second printer, a HP all-in-one Photosmart 3210. Technology concluded that, because of the presence of the solution Center for the C410A, the scan of 3210's function, which depends on a previous Solution Center version much (v7), could not coexist on the same computer. So, the solution to this issue is simply to use the 3210 for everything except scanning.

  Thanks for your efforts. Detective Conan.

• Photosmart Premium printer/Scanner will not print

  I just bought an iMac and have installed the latest HP driveres for my Photosmart Premium, but it seems that there is a kind of shipping between the two problem.

  When something I send to the printer (and I tried a number of different software applications) it seems to take a long time to buffer, or simply not print at all.

  I noticed a page or a towing cost about when printers go into energy-saving mode this can be a problem, but I can not disable the mode, there is only 5 to 15 minutes to choose energy-saving.

  I seem to be able to bypass sometimes by unplugging the USB cable to the back of the computer and by him plugging in again, I guess that it wakes up the printer.

  can anyone give me ideas on how to address this issue.

  T

  OK, thanks for the clarification.

  Click the icon Apple and chicken software update.

  Any update HP is available?

  If so, be sure to install it and then check for any improvement.