Pilot G1 USB 250 HP

Similar Questions

• How to make Toshiba USB 250 GB HARD drive read-only?

  Hello

  I just plug a Toshiba USB 250g external hard drive to replace all the sticks of memory, I've been using.

  I'll use this external hard drive to copy files to other computers and I would like to know how to make the drive read-only.

  Moreover, all the other tips to protect the disc would be extremely welcome.

  I use a Dell with Windows 7 laptop.

  Thank you very much

  Dougal

  I don't know what HARD drive you have exactly, but I know that Toshiba offers a software protection with external hard drives.
  Did you check manuals? Is something like that provided with your HARD drive?

  Maybe you need to use some third party software part for the protection of files on the HARD drive. Google all over the place.

• External USB 250 GB HARD drive does not connect

  Hola everyone,

  A year ago I bought 2 this record.
  Now, the two (running on different stand-alone on Windows 2000) do not contact for the pc. The LED is red and blinking blue.

  The doesn´t of "fantastic" manual say anything.

  Any ideas out there?

  Hello

  I have no idea and I don't know what you're doing with your drives, but it will be interesting to know if you have tried to do something to solve this problem.

  Let moments hard drives without power and try to connect again.

• 250 HP G4: HP 250 g4 windows 7 usb drives

  Hi, I got my 250 HP (m9s71ea) on win7 64-bit g4. Intel celeron and intel graphics hd top card. In any case, I have a problem with the 2 pilots. (Usb) universal serial bus controller and my camera. My USB doesn't work, died and for my camera I use youcam program to check if it works and gives me this message: no webcam detected. Pls help if some1 can tell me something about this. Thanks anyway

  Hello:

  The webcam works may not because it lacks the driver.

  Try the universal driver HP HP Probook 450 G2.

  It's the pilot USB3 for USB3 ports you need.

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/24896/USB-3-0-Intel-USB-3-0-driver-for-Intel-NUC

• HP Pavilion dv6-6135dx USB 3.0 problems

  Recently bought this laptop, I like it, it works fine.

  I reformatted about the day that I got this laptop. However, I can't get USB 2 ports on the left side of the laptop to work, I guess it is the USB 3.0 ports. The two USB ports on the right side of the laptop work well, I guess they are USB 2.0 ports. It's probably missing drivers.

  I tried to download Renesas Electronics USB 3.0 host controller driverthe HP support Web site. It does not work. After installing and running the utility USB 3.0 host controller that it installs, a small dialog box appears which says 'not found USB 3.0 host controller '.

  In Device Manager, I have two devices that have yellow exclamation points. One is listed as Controller of Bus SM, the other is listed as unknown device. The hardware ID for those who are:

  SM Bus controller:

  PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C & REV_13

  PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  Unknown device:

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  Windows Update cannot find something for these two. I also tried to manually select the following drivers for the unknown device and the unit still does not start:

  1. Renesas Electronics USB 3.0 Host Controller

  2. Renesas Electronics USB 3.0 Hub

  3. Renesas Electronics hub USB 3.0

  4. Renesas Electronics USB Hub

  Although I'm not too worried about the SM Bus controller, mainly because I have no idea what its purpose is, I suppose that the ports USB 3.0 is the unknown device because of the hardware ID. Help please!

  The problem is that HP is not labeled correctly pilots. USB 3.0 drivers they have under "Chipset" do NOT allow the ports under Windows 7 on the DV6-6135DX. I discovered this way lasts as well as others.

  I replaced the hard drive and decided to use a generic version of Windows 7 to avoid the HP bloatware. After installation, port USB3 drivers have not been installed and install the package of the chipset section has nothing. Then I found a thread at Notebookreview.com where someone told me where were the USB drivers.

  The drivers for the USB 3.0/chipset ports are rolled in the driver VIDEO package. After you have installed the package of video drivers, my USB 3.0 ports worked. I then installed a video driver up to date from the AMD website and I'm good to go.

  Nowhere on the HP driver page it mentions that USB 3.0 drivers are actually part of the package of video drivers. I had to find the info from a thread at Notebookreview.com. Do not this way. HP should be out pilots in 2 packages and put them in the appropriate section, or put some type of ticket in the chipset section on where the chipset drivers are really.

• a1600n: usb joystick a1600n

  I bought a game controller to my pc. Its not a brand name. It came with a disc bit installations but it will not read my cd player. Pilot joystick usb disk (at the front of it) say. I have not looked in the control panel and thers no mention of any gamepad option. Were to find a driver for this thing?

  Hello

  Try this Microsoft link how to automatically get recommended drivers.

  BTW - I use a joystick Saitek X 45 and the manufacturer does not provide the necessary drivers.

• usb 3.0 device sell me codigo 10 con el driver activated como solucionarlo

  He wont UN material nuevo ultimo pilot a usb 3.0 of the marca renesas electronica, he wont el puerto, y me sigue el ordenador Quebec respond no
  Tengo el driver, por one wont lado y por otro than lo tengo actualizado y sell me 10 Código.
  Como lo puedo delivery,

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page of answers (English) v -click and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Ay019tu HP: HP ay019tu Wireless and blutetooth drivers

  Hello

  I installed Windows 64 bit edition ultimated. I have all the drivers for HP ay019tu HP Web site only.

  But wireless becomes active. Need help with the correct driver. I have widnows 7 OS only with me. cannot switch to other OS.

  Note- It worked very well on "ubuntu"

  

  Details of the pilots

  USB\VID_0A5C & PID_216D & REV_0112
  USB\VID_0A5C & PID_216D

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  Hello:

  You need these drivers wireless and bluetooth for W7...

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72879.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72617.exe

• ScanJet 5370C: is there a Windows Vista compatible driver for Scanjet 5370C

  Analyze the used to work OK with Windows XP now want to use it with Windows Vista, but need a Jet pilot. USB connection.

  ScanJet 5370C y at - there a driver available?  Is no longer supported by manufacturer

  You could set a scanner driver generic as the driver of the HP 5000 here series:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03408379

  Driver ot the 5300 here:

  http://www.nodevice.com/driver/company/Hewlett-Packard/scanner.html

  Also, there is a program out there called vuescan which can provide a generic twain driver.

• Re: Error with driver Bluetooth Stack on protected Z830

  Error during installation of the Bluetooth stack for Windows 7 (version of 15/05/12): first pilot "Bluetooth USB controller-10" properly installed but the second a "Bluetooth RFBUS" fails.

  Therefore Bluetooth does not work. PC says that it is not enabled (with Fn + F8 or Bluetooth setting running)

  Note: the Atheros driver is up-to-date. I tried with and without the Bluetooth Driver filter Pack 1.0.9.

  What should I do?

  Thank you!

  PS: Protected Z830 PT224E with 64-bit windows 7

  Are you using the original preinstalled OS Hat you got with your Portege?

• using recovery on new SSD disks

  Hello!

  I just bought a new SSD, Corsair 120 GB and I want to use it as a system for my HP DV7-7259nr want to drive. How can I use the Windows 8 recovery disks to do? Or... simply... How do I make this change?

  Any advice is welcome!

  Thank you

  Hello Costin.
  
  What disc it has not on?
  
  I think this may have failed because of an Intel driver.  For some reason, one of the pilots ("" Description: USB - IF USB Host Controller xHCI ' ") was an integrated 01/01/2013 expiration date.  This caused a lot of customers unable to perform the recovery.  The work around this problem is to go into your BIOS and change the year of 2012 and save the changes.  This should allow you to install Windows, and once installation is complete, you can change the clock to the correct time.
  
  Let me know if it helps.  Have a most excellent day!

• How to remove the selected driver windows for your Android phone if you want to use a different driver such as pdanet?

  I am trying to download PDAnet found at http://junefabrics.com/android on my desk so that I can use my T - mobile Mytouch 4 G phone as a modem for internet.  During this process, Setup of hardware for windows installed a pilot Android usb which is not compatible with pdanet.  I was not able to remove this driver or make compadible with the driver that I would use.  I went into Device Manager and tried to uninstall the generic usb driver, but this does not seem to actually remove it. I also tried to update the driver, and it does not work either.  I rebooted the computer several times and run updates of Windows (just the ones he can do without internet).

  On my desktop computer's operating system is Microsoft Windows XP Professional, version 5.1.26. I did not send this email from the computer with the problem because, well, I HAVE no INTERNET on this computer.  Help, please!

  Hi Virginia,

  The pilot , you need to download. Once install you on the machine it will then detect the Mytouch 4 G phone.

  Also you can see the T-Mobile Forums of below with all the problems associated with Pdanet.

  http://forums.t-mobile.com/T5/myTouch-4G/PdaNet/TD-p/560883

• Receive lots of BSOD due to ntoskrnl.exe, they stopped, but started again after a month

  I get lots of BSOD. I installed "WhoCrashed" and analyze the dump files. Here's what he said:

  Saturday, October 3, 14 17:29:30 GMT PM your computer crashed
  crash dump file: C:\Windows\Minidump\031014-15147-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B80)
  Bugcheck code: 0x4E (0 x 0x2007E, 0 x 2, 0 20075, 99)
  Error: PFN_LIST_CORRUPT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that the page frame number (PFN) list is corrupted.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  I have this problem for a long time. I've updated the drivers, windows updates, no effect. But, for some reason, he did not seem since February. But Monday, I used MiniCygwin_GOptimize_v1.34.02 to compress files apk android. He uses a lot of CPU. And after that the BSOD began to reappear. I downloaded the Minidump file and Information System if someone wants to check.

  Let me know the reason for these BSOD and how can I solve this problem.

  Hello

  We have many bug different controls:

  PFN_LIST_CORRUPT (4th)

  This indicates that the page frame number (PFN) list is corrupted.

  This error is usually caused by a driver passing a list of descriptor of bad memory. For example, the pilot could call MmUnlockPages twice with the same list.

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1A, {5003, fffff780c0000000, 6933, 64ba0002d266}

  -1 setting of the bug check is 5003 which lists free work is corrupt. It is probably a hardware error.

  We also have another 1st parameter:

  Error checking 1 a, {fffff6800005cf40, eab00001beb34867,403, fffff6fc00df59a0}

  - Parameter 1 of the bug check is 403 which indicates the page table and NFPs are out of sync. It is also probably a clerical error.

  ^^ Pointed out that both of the above can still be caused by a driver causing corruption, but it is generally unlikely.

  And another...

  Error checking 1A, {41284, 159a0e001, 104 d 57, fffff70001080000}

  -1 setting of the bug check is 41284 indicating a PTE or the fixed work list is corrupted.

  BAD_POOL_HEADER (19)

  This indicates that a pool header is corrupt.

  Error checking 19, {20, fffff8a00b91df40, fffff8a00b91e020, 50e040c}

  6: kd >! pool fffff8a00b91df40
  Pool page fffff8a00b91df40 region is unknown
  fffff8a00b91d000 size: 4 d 0 previous size: 0 Ntff (allocated)
  fffff8a00b91d4d0 size: 30 size: 4 d 0 PfFK (allocated)
  fffff8a00b91d500 size: 30 size: 30 PfFK (allocated)
  fffff8a00b91d530 size: 10 previous size: 30 (free) NtfE
  fffff8a00b91d540 size: 30 size: 10 Ntf0 (allocated)
  fffff8a00b91d570 size: size previous 10:30 (free) Nbmc
  fffff8a00b91d580 size: 40 previous size: 10 DxgK (allocated)
  fffff8a00b91d5c0 size: c0 size previous: AfdX (protected) process (allocated) 40: fffffa801098c7f0
  fffff8a00b91d680 size: 170 previous size: c0 MPsc (allocated)
  fffff8a00b91d7f0 size: size previous c0: 170 FIcs (allocated)
  fffff8a00b91d8b0 size: 40 size: c0 (allocated) NtFs
  fffff8a00b91d8f0 size: 30 size: 40 (allocated) PfFK
  fffff8a00b91d920 size: 30 size: 30 Ntf0 (allocated)
  fffff8a00b91d950 size: 150 size: 30 FMfn (allocated)
  fffff8a00b91daa0 size: size 160: 150 FMfn (allocated)
  fffff8a00b91dc00 size: 40 size: 160 (allocated) MmSm
  fffff8a00b91dc40 size: c0 size previous: 40 FIcs (allocated)
  fffff8a00b91dd00 size: 10 size: c0 sect (free)
  fffff8a00b91dd10 size: 170 previous size: 10 MPsc (allocated)
  fffff8a00b91de80 size: size previous c0: 170 (allocated) NtFs
  * fffff8a00b91df40 size: size previous e0: c0 (free) * FIcs
          PoolTag FIcs: Context of FileInfo FS-Filter binary stream: fileinfo.sys

  ^^ Block of pool who looked in the page pool belongs to the context of FileInfo FS-Filter flow. This is related to the file system.

  6: kd >! poolval fffff8a00b91df40
  Pool page fffff8a00b91df40 region is unknown

  Validation of the headers of pool the pool page: fffff8a00b91df40

  [Fffff8a00b91d000] page pool is __inVALID.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  2: kd > fffff960000a874f ln
  (fffff960'000 a 8720)   win32k! NextOwnedWindow + 0x2f |  (fffff960'000 a 8770) win32k! xxxRemoveDeleteMenuHelper

  ^^ The exception is produced in win32k! NextOwnedWindow.

  -----------------------

  Overall, this looks like the faulty RAM. It's not like there is a foul-smelling waters driver causing memory corruption here, but it is possible. The reason I mention this is because I see it in the crash dumps after dumping the! v

  OVERLAPPED_MODULE: Address overlap 'WinUsb' and 'ssudbus.sys'.

  ^^ WinUsb.sys - pilot class USB Windows system, it is a part of Windows. ssudbus.sys-

  SAMSUNG USB Composite Device Driver. Probably a part of Samsung Kies. Uninstall everything that you can find this topic.

  -----------------------

  Please run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• Computer Asus laptop has ceased to recognize the external hard drive Hitachi

  The external hard drive was working ceased to be recognized. I troubleshoot-conducted pilot issues, usb port, System Restore... nothing I've tried has worked. Suggestions?

  Hello Hunter.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the model number of your PC Asus laptop?
  2. you made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted USB controllers or device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Uninstall and reinstall the USB controllers and check the issue. Please follow these steps:

  a. press Windows + X keys and click on Device Manager.
  b. develop a 'USB Bus controllers'. Right click on a device, and then click Uninstall. Please repeat this step for each device.
  c. once it's done, restart your computer.

  All USB controllers will automatically install.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• DRIVER_IRQL_NOT_LESS_OR_EQUAL (athw8x.sys)

  (athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error on a blue screen.

  I copied the contents of minidump and the MSinfo32.

  https://onedrive.live.com/redir?RESID=B7FB0713E87377A9%21112

  https://onedrive.live.com/redir?RESID=B7FB0713E87377A9%21107

  Hello

  All attached files of the DMP are the bug check DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address

  1: kd > k
  ChildEBP RetAddr
  8c7485d0 81b 39923 nt! KiBugCheck2
  8c7485d0 9273ca8a nt! KiTrap0E + 0x1cf
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  8 c 748760 9273c0b8 athuw8 + 0x12da8a
  8 c 748778 926d9aa4 athuw8 + 0x12d0b8
  8 c 748804 92768479 athuw8 + 0xcaaa4
  8 c 748810 927616c 3 athuw8 + 0 x 159479
  8 c 748820 9273e18d athuw8 + 0x1526c3
  8 c 748868 9273dfc7 athuw8 + 0x12f18d
  8 c 748884 92718662 athuw8 + 0x12efc7
  8c7488b0 926ed700 athuw8 + 0 x 109662
  8c7488cc 926f2ea4 athuw8 + 0xde700
  8c7488f4 926ef75f athuw8 + 0xe3ea4
  8 c 748904-9273 has 007 athuw8 + 0xe075f
  8 c 748974 926d2fc1 athuw8 + 0x12b007
  8c7489d0 9266e128 athuw8 + 0xc3fc1
  8c748a48 9266a7f6 athuw8 + 0x5f128
  8c748aa4 926d2c84 athuw8 + 0x5b7f6
  8c748b2c 927972af athuw8 + 0xc3c84
  8c748b44 92692fdb athuw8 + 0x1882af
  8c748bcc 9269312c athuw8 + 0x83fdb
  8c748be0 927997e2 athuw8 + 0x8412c
  8c748c30 81afb372 athuw8 + 0x18a7e2
  8c748c70 81b3ac61 nt! PspSystemThreadStartup + 0 x 58
  8c748c98 81a83a2f nt! KiThreadStartup + 0x15
  8c748cb4 00000000 nt! IofCallDriver + 0x3f

  athuw8.sys is the network adapter Atheros UB91/UB93/UB94 of Qualcomm, pilot (Wireless USB adapter).

  Perhaps this driver is not compatible with Windows 8, see if there is an update as soon as POSSIBLE. If not, uninstall the software and remove the adapter for troubleshooting purposes.

  Kind regards

  Patrick