Tecra A3: display noise

Similar Questions

• Tecra M2 display is compatible with Tecra M5?

  Hello

  I have a Tecra M5 with a ladle monitor.
  does anyone know if the monitor from an old M2 is compatible if I Exchange?

  Thanks in advance

  Hello

  To my knowledge the two models Tecra (M5 and M2) supports the 14.1 display.
  The question is whether the cable screen M2 would be match with the M5 connectors

  Well, it is not known to me but I think generally you likely would be compatible with Tecra M5 Tecra M2 display.

  Greetings

• Tecra R850 - display driver problem - BSOD

  Hello

  I have a Tecra R850 with the ATI HD 6450 M and every now and again it crashes and BSOD appears.
  I have observed that mainly happens when playing flash videos.
  After reviewing the events system, I discovered that there is a problem with the display adapter driver.

  The said event system is perhaps a solution [here: http://wer.microsoft.com/Responses/Response.aspx/21682/en/5.1.2600.0.00000000.9.9?SGD=13feb1cd-4c8b-4c3a-aeee-ca4ca2c99729]

  This Web page indicates that it is a bug in the driver and I need to upgrade to the latest driver to solve problem, and it provides a link to the ATI Web page.

  I downloaded the drivers from ATI Web page and the installation program indicates that it is not compatible with Toshiba laptops.
  I checked the Web from Toshiba site and I already have the last (and only) driver for my graphics card.

  As it appears on the Web page, there is a bug in the driver, but Toshiba seems not having published an update of the pilot despite Ati...

  Can anyone help?

  Thank you
  Jose.

  Hi Jose

  Are you using the original Toshiba pre-installed Windows or your own version?
  Display driver original included in the original recovery image is tested, so you shouldn't have trouble with basic stuff like flash video playback.

  Since when did you notice this problem? Can you give us an example when this happens?
  You have installed updates?
  To be honest, I can't imagine that this issue is on the first day of use.

• Tecra 8100: display suddenly will Dim

  Hello

  during normal operation of the Tecra 8100, suddenly the screen darkens. The display still works, only the backlight is dark. By pressing the small pin, which is turn off the backlight when you close the screen, light reappeares. Sometimes for hours, sometimes for a few minutes, but especially the second. A restart of the computer solves the problem for at least half an hour. What can I do?

  Thanks in advance

  Kai

  Hello

  When the screen will Dim can you get by pressing any key on the keyboard or move the mouse?

• Tecra A4 - audio noise. URGENT!

  Hello
  last week, I bought my new tecra a4-168
  but there is audio noise when I play the audio CD, mp3, midi...
  I tried the helmet and it's the same problem (which means that it is not the fault of speakers)
  I tested all the files on other PCs and they were very good.
  I tried to disable powermanagment but the problem remains the same, I also updated the bios.

  the audio driver version is 5.12.1.5240

  Hello

  I can't imagine that this problem is on the first day. You did notice since when this noise persists? On this path, it is not easy to say why this sound produced what may be the reason.

  I put t believe that noise occur because of the sound card. If there is no success, change audio settings don't try to reinstall the unit with recovery CD. If the problem persists it is definitely a hardware failure and the unit can be checked by the service partner. The warranty will cover all costs.

• Tecra A4: fan noise

  Hello
  I have a new laptop Tecra A4 with a processor P740 and am concerned enough by the noise of the fan.

  I have tried many operations to cool the laptop, including:
  -clock down to 800 Mhz processor
  v down the processor 0, 732V
  -clock to the bottom of the ATI graphics card.

  However, even with these restrictions, the fan works regularly in order to cool the CPU.

  I have not found any fan monitoring software that works with this Tecra.
  I've seen some users Dell face the same issues and that Dell developed a specific BIOS to resolve this (in mode AC, the fan can run constantly, but at a very low speed).
  I hope Toshiba works too on this topic...

  Hello

  I didn't see the new Tecra A4, but you can try to use the properties of standby power settings. Here you can change the method of cooling. Try to set it to the lower level.

• Tecra A3 106 noise on Audio output all supported

  Hi all

  My Tecra A3 generates a noise on line out / headphone for charging the battery.
  When it is unplugged, the noise goes off.

  Is this normal?

  Thanks in advance.
  Onur.

  Hello

  If you remove the battery and just use AC power is it the same situation? If you make more loud music is that noise more annoying loud too?

• Tecra M2 - strange noise abnormal notebook

  Dear Sir/Madam,

  I received my new Tecra M2 two days ago. As I started using it, I noticed a strange noise coming from the laptop. I'm QUITE sure that's NOT the hard drive or fan, as it seems odd and it's a constant noise. Noise is also quite noisy and annoying, it sounds like a mobile phone signal! Could you tell me what could be the problem and how to solve?

  Thank you very much

  Hello
  I also had a problem with noise if my M2 has been linked to a portreplicator. The solution was the number of Microsoft Hotfix KB822603. I hope this will help you.
  Good bye

• Tecra M7 - display will not be repeated after 10 minutes of inactivity

  Hello everyone, I'm new here so please be patient with me! :-)

  I've had my new Tecra M7 for about a week now, and while everything else seems to work perfectly, there is a problem with the LCD screen. By default, it is configured to turn off after being idle for 10 minutes. The problem is that it won't resume from this State.

  I see that the laptop itself is working (he reacts to pressure on keys etc.) but I had to Hibernate and resume the screen lights up. The touchpad and keyboard activity doing nothing, only hibernate.

  At the office, I use the laptop dual-view mode with external 19 "LCD screen connected as secondary display. In this case, the external LCD display will resume after moving the mouse or touch the touchpad, but the primary laptop LCD screen will remain inactive until hibernation.

  My question is: do you have someone running into the same question, or that someone has any ideas?

  I thought to upgrade drivers Quadro NVS, but discovered that the pre-installed ForceWare drivers (version 84.52) accompanying are actually more recent than those displayed on the nVidia site (84,26 - confusion)! Also he reports (everywhere in the system), it has 256 MB of video RAM, so the specification Tecra M7 on the box says 128 MB so I don't know which is correct?

  Thanks for all the ideas in advance!
  RADO

  Hello

  Certainly, the nVIDIA Quadro NVS 110 M on the Tecra M7 graphics card supports 128 MB of video RAM.
  Graphics drivers from Toshiba are not the same thing as the manufacturers of original cards drivers. Toshiba drivers are a bit changed.
  You must use the drivers from the site of nVidia, but especially on the site of Toshiba.

  If there is a newer version of the graphics card driver, then remove the old and install the driver from the website of Tosh.
  Additional if the new BIOS have been published, you can try to update. But be careful. Be sure to use the good BIOS and the correct procedure for updating the BIOS.

  Good luck..

• Tecra S1 - display problem, even on external monitor

  One day I was using the laptop, surfing the net normally, everything was fine and suddenly the screen went bad... (photo below). I tried using an external monitor and still the same, so I'm sure that my monitor is fine and it is probably a problem of display card?
  I tried to update my display card driver and no luck, so I decided to use the recovery CD to restore the system and no luck once again.

  Here is a screenshot after the system restore... y at - there a way to fix this without taking it to a service center?
  Thank you
  Link: [http://i130.photobucket.com/albums/p262/ctb205/mon.jpg]

  Hi borist,

  It s really great that you could post a picture of your problem. Thank you!
  In addition, you have already tried a lot of as the recovery facility and an external monitor.

  Unfortunately, it seems to be a hardware malfunction of graphics card. :(

  This means that you will need to swap the motherboard because the graphics card is fixed on it. Motherboard is a party quite expensive and Tecra S1 is old notebook then maybe you can get a second hand or laptop motherboard on eBay and swap it out.

  Good luck! :)

• Tecra 9000 display driver

  Hello

  I recently acquired a Toshiba Tecra 9000. I added a new 40 GB hard drive and installed Windows XP. The standard display driver does not allow me to connect an external monitor to extend my Windows desktop on 2 screens, so I downloaded the latest driver on this site. However, when I try to install the driver (S3 Graphics SuperSavage/IXC 1179) a hardware setup error appears saying this driver has not passed Windows Logo testing to verify the compatibility with XP. There is no other driver to select on the Toshiba site, so I installed the driver. At first, everything seemed ok, but today my laptop has projected Blue 6 times within the last hour. I've now uninstalled the driver and have not had any problems. However, because I have everything installed display drivers display is basic at best.

  No one else has this problem with the display driver for a Tecra 9000 with XP? Or anyone knows other drivers compatible with my model?

  Thank you

  It's very strange! All the drivers on the Toshiba download page are the same as the CD Utility & Tools.
  Is your TECRA 9000 a European model?
  Try using the driver CD tools & utilities. On this way, you'll be sure to use a right.

• Tecra 8100: Display of W2k driver - S3TRAY. EXE cannot be opened

  Hello

  I have the same problem as the BUSSINIT user posted earlier:
  I have a Tecra 8100 but my screen resolution is only 16 colors, so I tried all the downloads on this page display driver, but:

  S3TRAY. EXE cannot be opened, nothing to do.
  This is the default or something.

  The driver is probably old or something, but what to do?
  I mean, I can't work with display only 16 colors, please help me.

  THX

  Hello

  On the Toshiba page are two different Wk2 drivers listed:

  5.12.01.7002 - 7.30.2 pilot S3 display for the wild graphics card

  7.40.29 display driver for the S3 Savage MX

  Check if you are using the correct driver!

• Tecra 8000: Display driver

  Hi all, I hope someone can help with my problem. I have a Tecra 8000 and just reformat and installed Windows 98 Second edition, the problem is that I have a small window in the middle of the screen with a black border completely round. I don't have the original disks that came with it and said that I need to install the display driver, as I can change the resolution, is does anyone know where I can download this driver from, or can someone provide me with it. I tried the download from toshiba site, but its not available.
  I also tried to change the resolution, but because there is only the installed base driver I can't change it. If anyone can help.
  Thank you
  Mick

  [Edited by: admin on 3 July 05 13:21]

  Hello Mick

  The problem is that this device is not supported for W98SE and that is a reason why you can not find a driver on the Toshiba site. The graphics card in your unit is NeoMagic NM2200 (MagicMedia 256av).

  Please check on the net if you can find a driver on the site of producer of graphics card. There is no guarantee that it will work, but I'm sure that there should be no problem. Please also check the BIOS settings if there is an option called display stretching or something like that. If so he set to active.

• Laptop Tecra 8000 - display with almost ZERO light

  Hi all
  I have a problem with the brightness settings for my Tecra 8000.
  I lowered the brightness to the minimum values, but now I'm not able to down to a level that is "visible."

  Thanks for any advice you might have... it's just frustrating!

  Hello

  Refer to the manuals of use s. You can find how to adjust the brightness of the display to a lower or higher level.

  Also check the power sleep settings. On the Toshiba power extensions tab, you can find power schema Extension settings. Here, you can set different levels of brightness LCD.

  Good bye

• Tecra A9 - display Excel problem

  I have a user with a Tecra A9 causing of the problems with the display in Excel.

  When she jumps on a worksheet to another sorta screen flashes as Excel updates.
  While most of the cells white out with a bit of a click on sometimes they can come back.
  This happens on the laptop and the external display screen.

  So far
  Updated graphics drivers
  Put it on another version of office
  Off acceleration for the graphics card
  Patched up to date
  He spoke in a firm voice

  Did someone come acros something like this before?

  Try to update the driver to display on the Toshiba site.

  If it's not good, google for clues: http://www.google.com/search?hl=en&q=excel+flickering&btnG=Google+Search & meta = & aq = f & oq =