L7780 all-in-one printer does not start make

Similar Questions

• HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

  HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

  Hello

  Thank you for using the HP Forums.

  You can try this alternative solution to Scan:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• Just upgraded to Windows 7 and my Dell All IN One Printer does not print. It is said that the pilot of the AIO 942 not found

  Just upgraded to Windows 7 and my Dell All IN One Printer does not print.  It is said that the pilot of the AIO 942 not found.

  Anyone where I can download this driver?

  See http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20942%20Photo%20All-In-One%20Printer&v=Dell&uid=942STD&pf=0&pi=1&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit.

  There are only drivers for Vista at http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=R151559.

  They are supposed to work if installed in compatibility mode. http://en.community.dell.com/support-forums/peripherals/f/3528/t/19319527.aspx.

• HP C5280 All in one printer does not print all of the beginning of the page or end of page

  HP C5280 All in one

  Does not print all of the beginning of the page or end of page

  Hi david skelton.

  I would like that you start by checking that you have the latest drivers for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3204464&

  I hope this helps!

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 4380 all-in-one printer does not detect the print cartridge

  My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.

  I'm sorry you have a problem with your ink not detected.

  The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.

  For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.

• Photosmart premium all-in-one: printer does not print.

  I printed a photo of the night before and the next day it wouldn't print.  I put in a new black cartridge HP first, and when it does not work I put in a new photo cartridge.  All my cartridges show as complete on the computer report but the report to the printer does not show anything in the settings of the picture. I downloaded a driver updated, still no luck.  Very frustrating!  What can I do?

  Help please...

  Yay Jabzi!  I am so excited!  It actually worked!  I am 72 and a little hesitant to pull things out of machines so am very happy and grateful for your help.  Thank you!!!

  Marg

• My HP Photosmart C4280 all-in-One printer does not print PDF files. I use Windows 7 SP1.

  My C4280 printer does not print PDF files. Cannot understand it.

  I fixed the problem by uninstalling the printer, then re-install. That seemed to do the trick. Thanks for your help though.

• HP Photosmart 7525 e-all-in-one printer does not print black

  I got my product for a little over a year (out of warranty), I replaced all the cartridges and fact print diagnostic quality. However my black will not print. Photo black works, but not the principal, great one.

  I cleaned the pinhead super. At the beginning of printing, it was black, but then disappeared to grey streeks.

  Can anyone help with this?

  Thank you!

  The document here can help solve the black does not print on your Photosmart 7525.  Go through each of the steps, but be sure to check the events on solution 6.

  If the steps described in the seven first solutions do not resolve the problem of the post here can help.

• All-in-one HP Officejet 4635: my HP Officejet 4635 all-in-one printer does not print since upgrading to Mac 10.10.1.

  All-in-one HP Officejet 4635 does not print since upgrading to Mac 10.10.1. Any suggestions? Thank you!!!

  Hi brenHP4630,

  You might want to try updating the driver for your specific operating system. You can find the download HERE.

• 3520 all-in-one printer does not print

  Recently, my printer stopped printing.

  I used printing HP and doctor scan and there is nothing a test page is capable of printing after using it.

  I rebooted the printer and the router without success.

  I rebooted the computer without success.

  When I hit print a pdf document, the job goes to the tail and he says he has to wait, or there is an error.  Two of those messages showed upward.

  I use windows 8 and, usually, a printer icon appears on the toolbar at the bottom when I hit print and it does not appear now.

  Thanks for your help.

  Hello gie72,

  Welcome to the HP Forums.

  I see that you have a problem with printing from your computer via a wireless connection.

  I have a few troubleshooting steps we can try to solve the problem.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Another step we can try is to go into the Setup Menu and then go to wireless menu. Scroll to the Restore Defaults option and select YES.

  Go back to the top of the Menu wireless and make sure that the wireless is turned on.  Then go to the WiFi Protected Setup and connect the printer to the wireless network.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• 6520 inkjet printer all-in-one: printer does not obey orders requested

  When I try to change the printer from printing, for example a booklet to print a standard A4 size single sheet it does not obey the request, I have uninstalled and reinstalled the printer software and check the updates for software and drivers with no result.

  Anybopdy can help?

  Hi @Brisey,

  Welcome to the Forums of HP Support! I see you are having problems printing to A4 paper size. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I have provided a document to check the paper type and size settings of paper in the print driver, Printers HP Photosmart 6520 - Printing Documents (Windows).

  If you still encounter problems printing to A4 paper size, change the location settings on the computer to the default paper settings see if that will help.

  • Go to start, Control Panel, language and region.
  • Select the location tab, click the menu down and select the United States.
  • Then, click the Formats tab and click the menu down and select English (United States).

  Restart the computer.

  Again, check the paper size settings in the driver printing and the application you are printing from, go to file, Page Setup and select the correct paper size.

  You can also install a generic driver, if the problem persists.
  On the computer, go to start, devices and printers, select Add a printer. Follow the steps, select HP and Deskjet 9800 in the list. Set it as default printer.

  Please let me know the results and if there is anything else I can help you. Thank you.

• My HP Photosmart C4280 All in one printer does not print

  I troubleshoot the printer and it says that there is no problem.

  Tried to check ink, does not. Checked with MATS and there is no problem.

  is there a problem with these printers?

  Here are three books for this specific printer including how istalll it.  I suggest to download and review them to see if you properly follow the process:http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&softwareitem=mp-52220-1&os=219&product=3192753&.  If you have any questions as you go along.  There is a lot of reading, but there's everything you need to know to do it right - it's not just a matter of steps, but also to do them in the right order (and there may be steps that you did not because they were not explained properly).  Make sure you have all the software, drivers and firmware necessary and compatible with both your printer AND your version of Vista.  Download and re - install them again just to be sure, didn't you build a time corrupted version first.

  If those who do not help, contact HP Technical Support at the: http://welcome.hp.com/country/us/en/support_task.html and request their help in istalling the printer and do print and work in all its forms, it should.  They know more about their products that we do.  I'm sure they will be willing and able to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!