Similar Questions

• PING: transmit failed, error code 5.

  Hi chris,

  I also have similar problem like this.  my network connection is ok & its working fine, but I'm not able to ping giving following error

  C:\>ping 192.168.1.25

  Ping 192.168.1.25 with 32 bytes of data:
  PING: transmit failed, error code 5.
  PING: transmit failed, error code 5.
  PING: transmit failed, error code 5.
  PING: transmit failed, error code 5.

  Ping statistics for 10.22.22.1:
  Packets: Sent = 4, received = 0, lost = 4 (100% loss),

  C:\ >

  And disconnect it from the network showing connection

  error display:-connection stetus: unknown "the dependency service or group could start.

  When I go to start 'network location awareness' serivece in error 1073741288.

  In all this I have network surfing condition smoothly. but not able to connect to the local network % showing ping disconnect on the taskbar.

  Help me please to this problem...

  Patricia

  Hello Patricia,

  Thanks for posting your question on the Forum of responses of Micrsoft.

  I don't know exactly the question that your question was separated from the previous thread.

  What you ping? Another computer on your network? You are in a domain environment?
  Are all the computers on your network, Windows Vista or Windows XP?

  One thing, you can check to go in the registry.

  1. open the Start Menu > run and type regedit and press the Enter key

  2. navigate to the following location
  HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Lsa
  3. Locate the restrictanonymous key

  4. double-click on the key, set the value to 0 and press OK
  5. exit the registry and restart your computer for the changes to take effect.

  If please reply back and let us know if this helps with your error.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PowerVault MD3220i error (insufficient ability to backup device Cache)

  Hi all

  I appreciate your time and assistance with the following question.

  I recently upgraded to the latest firmware on my HP MD3220i and installed the corresponding update of the NVRAM.

  After you install the update, I get the following error in MDSM.  I checked the cache backup capacity and the total used the two related 1 680 MB.

  Is there a reason that the error occurs and what is the best approach to fix this problem?

  I checked the forums but don't see anything specific in addition to replace the module or the upgrade of cache memory.  Otherwise, the device works without problem, but like most of you, I hate this clear amber flashing in a data center perfectly Blue :)

  Thank you!
  Omar

  Ability of the insufficient Cache backup device

  Hello, Omar.

  This error has been research. In all cases this error is visible by our technicians of telephone, the RAID controller is replaced.

  After talking to some experienced engineers, I would recommend replacing this controller.

  This error can occur either bad shutting down the table leading to a corruption of the meta-database backup, or the stick (a small SD card) cache could be dethroned.

  You * can * try to remove the controller, wait that the "power run" for draining, reinstall the cache memory card and then put it back in the slot. Who can clear this error, but no promises. However, we do not replace the cache card herein. The only thing that replace us inside the controller's battery.

  I hope that helps you out. Let me know if you have any questions.

• Request support by MD3220i - error cluster [CF]

  Buon giorno, US vs riscontro gentile e di assistenza in merito al evento following preventivo:

  The infrastruttura e nostra composed da UN MD3220i con 3 host due e R610 PowerConnect 2848 switch, da some giorno a perdere instradamento verso gli hanno begun the host Announces where the MD3220i.

  Da una prima disgnostica di message following sulla MD abbiamo rilevato it 'alert ':

  Date/time: 08/01/16 8.26.31
  Sequence number: 41599
  Type of event: 4011
  Event category: error
  Priority: critical
  Description: Virtual disk not a being preferred due to the AVT/RDAC failover
  Specific event codes: 0/0/0
  Component type: RAID Controller Module
  Location of components: enclosure 0, Slot 1
  Recorded by: Module to slot 1 RAID controller

  Raw data:
  4 d 45 a2 7f 48 03 00 00 00 00 00 00 00 00 00 4 c
  11 40 18 01 97 eb 57 00 00 00 00 00 00 00 00-9F
  00 00 00 00 01 00 00 00 22 00 00 00 22 00 00 00
  08 00 00 00 00 00 00 00 02 00 00 00 01 00 00 00
  0 a 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  01 00 00 00 00 00 01 00 00 00 00 00

  We have tried a curare infrastruttura MD, host switch e spegnere.

  After the riaccensione he message di "alert" su e scomparso totally, senza più particular if MD, recoupling outdo degli host verso MD3220i risultava Semper ad where con conseguente perdita accesso alle cartelle di rete e macchine virtuali.

  Host No. 2 dei R610 abbiamo quindi con spento 3 he risultato che dopo d manuale da console del servizio cluster it sistema e partito a funzionare senza problemi di comunicazione più correctly.

  Lato host abbiamo rilevato che some door ISCSI MD non sono più ragiugibili del (nello specifico n ° 1 of the castroni sono no door porta del MD3220i controller)

  The VLAN non sono state modificate e lato PowerConnect 2848 switch if not rilevano if.

  Current location: MD3220I senza if a host adapter solo di n ° 3 access.

  Company di MD3220i:

  He prodotto e stato nel 2010 labor-intensive, co del prodotto e scaduta it 13/12/2015.

  Re: MD3220i fuori co serial number F1QGY4J

  Buongiorno, the sto contattando by mail.

• My desktop computer shows that it is connected to the network. However I can not access the detained.

  without intwernet access network connection.

  My desktop computer shows that it is connected to the network. However I can not access the detained. Other computers using the wireless modem work fine. I'm NOT computer savvy, so I am at a loss. I ping tri3ed myself and the result is unanswered.

  Hello

  You can consult the following thread link and check.

  PING: transmit failed, error code 5.

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• Approval of order

  I have ACS solution engine, I asked authorization from command located on the user, under the reference is set of permission controls

  See command

  version license

  permit from aaa

  permit config

  interface license

  allow xlate

  nat permit

  global license

  permit access list

  Road permits

  IP route help

  permit of vlan brief

  ping permit

  Clear command

  version license

  permit from aaa

  permit config

  interface license

  allow xlate

  nat permit

  global license

  permit access list

  Road permits

  IP route help

  permit of vlan brief

  activate the command

  ping permit

  now the problem is that the user is able to connect successfully and is going to activate the mode, but no way, he is able to ping the network.

  Although I welcomed the command ping, but user error

  ping 172.28.95.2

  Command authorization failed

  I want to allow the user to ping anywhere in the network.

  Please tell me how to do this.

  It should be

  configure---> on the left box

  allowed to terminal---> on the right box.

• Deployment/Configuration 12 c problem Agent of OEM 12 c Console upgrade

  Greetings,
  
  I'm still struggling with the difficulties of deployment/Configuration of the agent from the Console to upgrade Enterprise Manager 12 c 12. I use the method 2-system. Several agents were deployed properly, but the health check shows that the ping test failed. I found many discussions of the problem, but many of them are related to the deployment and configuration of a new agent from the console 12 c. The only note I could find about my this is Metalink Note [1377436.1] EM 12 c: upgrade health report deployed 12 c Agent Agent shows "Ping Test failed.
  
  I am able to start the agent of 12 c and we found several suggestions including resecuring the agent, using emctl to clear the status of the agent, but none of those helped.
  
  Some of the things I see are when the agent 12 c is emctl status returns SGD Version: (unknown). emctl ping SGD returns agent blocked by WHO. An interesting thig I see is a warning in the file - gcagent.log
  
  2013-01-24 09:39:23, 076 [167:B5BF5C12:GC. Executor.1 (Ping WHO)] WARN - bad ping interval (EM_PING_NOTIF_RESPONSE: ERROR-Plugin information do not correspond with the repository)
  
  which leads me to think the problem can be related plugin. If it is indeed the case, I'm not able to find information telling me how to fix plugin.
  
  Any suggestions are greatly appreciated.
  Thank you.
  Bill Wagman

  Akanksha,

  Thank you. SR 3-6714456351 has been opened Friday last and is still ongoing.

  Bill Wagman

• Guest VM is unable to connect to DHCP (my router) after attaching a network cable & bridging

  A few weeks ago, my dog has bitten my network cable and I had to go wireless until I had another network cable. Well, during this time, I had to use NAT because the bypass no longer works wireless... While procrastinating on a cable network, I reinstalled VMware Workstation 7.1.4. Well, now that I have a network cable, I decided to go ahead, then assign the network bridge setting. Well, now for some reason it won't even get an IP address from the router. DHCP is indeed works great on the router that I have a client PC that I'm trying, and it connected fine wireless.

  No idea why this VM guest pull one IP address? I even try to set a static IP address that is not used, will not go out. I need to reinstall VMware Workstation whenever I change NIC cards or something? I tried to go to the Edit > virtual network editor and reset all network components. Apparently it does not either. Don't know what else to do.

  It works if I put back to NAT but not filled... Before my network cable being bitten by my shepherd, he has worked... Don't know what the hell that is happening now. So annoying > _ <

  If I have on my NIC bridged (for the guest virtual computer), I try to ping my router (192.168.1.1) and you get "" PING: transmit failed, error code 1231. ""

  Why would it work once when using a network cable, then after the use of NAT for a few weeks and back to cable network, even doesn't work at all?

  Disable the automatic bypass for VMnet0 and select the target of the network adapter in the virtual network Editor.

• rapidwiz does not host or domain control

  Hi all
  
  I started rapidwiz to install R12.1 on windows 2003.
  He did al controls, but fails on the check off-host or domain.
  The following error occurs:
  Host/domain
  
  command: ping n 1 incoredemo
  
  Ping IncoreDemo [172.30.26.159] with 32 bytes of data:
  
  Reply from 172.30.26.159: bytes = 32 time < 1 ms TTL = 128
  
  Ping statistics for 172.30.26.159:
  Packets: Sent = 1, received = 1, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 0ms, Maximum = 0ms, average = 0ms
  
  Ping the host succeeded
  command: ping n 1 incoredemo.officevision
  Ping request could not find the incoredemo.officevision of the host. Please check the name and try again.
  
  RW-50011: error:-host.domain ping returned an error: 1 system variable PATH value:
  C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem;c:\Cygwin\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\
  
  
  
  
  
  So I guess that the domain name is not correct... But I'm not even in a field, I'm in a working group, called officevision.
  Can someone tell me what I can use for domain?
  Or can I just continue?
  
  Thanks in advance!
  Remc0

  Hello

  command: ping n 1 incoredemo.officevision
  Ping request could not find the incoredemo.officevision of the host. Please check the name and try again.

  RW-50011: error:-host.domain ping returned an error: 1 system variable PATH value:
  C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem;c:\Cygwin\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\

  Make sure you entered valid in the hosts file.

  So I guess that the domain name is not correct... But I'm not even in a field, I'm in a working group, called officevision.
  Can someone tell me what I can use for domain?
  Or can I just continue?

  Set the name of the domain as follows:

  -Right click on "My computer" > properties > "ComputerName" > change
  -The value "name of the computer.
  -Click on more
  -The value "This computer's primary DNS suffix"

  Kind regards
  Hussein

• Cannot ping localhost - error code 2 on Satellite Pro A200

  Dear COMPUTER gurus,

  I have a portable Satellite Pro A200.
  When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
  I tried to fix the winsock using articles from microsoft without success.

  Now I want to reapair the operating system using the recovery DVD.

  The recovery DVD has a repair option?
  If this isn't the case, anyone how to solve this problem?

  Help please!
  This is the result, I was using the pc diagnostic tool.

  Date 2008-08-30 01:47:12

  [Information on PC]
  Model name Satellite Pro A200
  Part number PSAF4U - 004 00D
  Serial number Y7312740Q
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.70
  Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
  Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
  Version Mobile Intel (r) 965 Express Chipset Family video = 6.14.10.4833
  Screen resolution 1280 x 768 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5440
  Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = 10.14.6.3 version = MAC address
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.1.0.100 references MAC address =
  TOSHIBA Software Modem Modem version = 2.1.77.0
  Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
  Interface IDE 2 no
  Interface IDE 3 no
  Interface IDE 4 no
  IDE Device 5 Hitachi HTS542512K9SA00
  Interface IDE 6 no
  Internet Explorer 7.0.5730.11

  Hello

  > I tried to fix the Winsock by using the Microsoft s articles with no luck
  I guess you're meaning to this MS article knowledge base:
  [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

  Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

  So searched the Web of the 3rd party site and someone has suggested to try these tips.
  It s also from Microsoft:
  * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

  So check it out maybe it helps

  If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(

  Concerning

• SSL security certificate; Server error ping while testing the Ping between 2 Windows servers

  Hello

  I created SelfSSL certificate for a Windows Server to connect to another Windows Server. I have install the certificate using the MMC Console SelfSSL

  (Certificates).  When I run an application to test the Ping between 2 Windows servers... The below error is the result of executing that PING test.

  

  Hope someone can enlighten me on a resolution?

  Thank you

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Can not get my TV to connect to internet wireless gateway ping error any ideas

  I have a samsung tv have information detects the router but gets the gateway ping error

  Hello

  1. what operating system do you use?

  I suggest you follow the link and check.

  HTTP://SUPPORT-US.SAMSUNG.COM/CYBER/POPUP/IFRAME/POP_TROUBLESHOOTING_FR.JSP?IDX=150825&MODELNAME=LN46C750R2F&MODELCODE=&SESSION_ID=NJC1LW8VRG2CJYCF5QVNDHTLS14W2J43BJDHP3Y2KSJGM1ZNJ012!-1826039379! 1761676444! 7501! -1! NONE! 1298367221195

• Cannot open websites, error DNS when the ping command cannot resolve the name

  Cannot open all websites on a PC. (other computers on the network can access the sites without a problem)
  Error message is "Internet Explorer cannot display webpage."

  I can ping (internal and external) of the IP and gateway addresses.
  Ping translates:
  C:\>ping www.yahoo.com
  Ping request could not find host www.yahoo.com. Please check the name and try again.

  Nslookup translates:
  C:\>nslookup www.yahoo.com
  Can not find the name of the server for the address 192.168.0.1: non-existent domain
  Default servers are not available
  Server: unknown
  Address: 192.168.0.1

  Non-authoritative answer:
  Name: www-real.wa1.b.yahoo.com
  Address: 69.147.76.15
  Alias: www.yahoo.com, www.wa1.b.yahoo.com

  Pathping translates:
  C:\>Pathping www.yahoo.com
  Unable to resolve target system name www.yahoo.com.

  The problem occurs on a wired and wireless connection.
  Reset TCP/IP via netsh int ip reset c:\ressetlog.txt results in the following in the log file error message:

  discount Linkage\UpperBind for USB\VID_0B05 & PID_1723\5 & 2461925A & 0 & 5.  incorrect value was:
  REG_MULTI_SZ =
  SymIM

  Is there a total of 9 errors in the log similar to the one above.
  The host file has only 127.0.0.1 in there.
  Clearing the cache of the arg, flushing the DNS and do a repair on the network connection does not resolve the problem.
  Install a new network device does not resolve the problem.
  I also deleted all the antivirus software and security, including firewalls.
  The Windows Firewall is disabled.
  Boot in safe mode with Networking does not solve the problem.
  Running Winsockfix does not solve the problem.
  Internet Explorer 8 (reset web settings has been done)
  Windows XP Media Center with SP3
  Execution of the IE Diagnostics results in an error 12007 the server name or address cannot be resolved.

  Get the end of the line...

  Any other ideas?

  Thank you

  Larry

  Sorry for the late reply, but I did not have access to the MS Web site for a few months.

  I tried your suggestions, they do not work.

  The resolution is to do a repair of the operating system out of the CD.  Who cleared up the problem.

  Thank you

  Larry

• ipconfig/all and the ping command is not recognized, error: internal or external command.

  Original title: back command.
   
  Then I run ipconfig/all and show the command ping at the command prompt ipconfig/all error is not
  recognized as internal or external, command an executable program or a file of commands in windows xp professional sp3

  Hello

  These two commands are protected against accidental removal by Windows, that is if they get deleted Windows will work just add in the C:\Windows\System32 folder.

  At the command prompt, try to change this folder by typing cd C:\Windows\System32 (and then hit return) before trying the command ipconfig or ping.

  If this lets then run you your 'path' is probably messed up.

  You may first want to set a system restore point...

  http://support.Microsoft.com/kb/948247

  .. .in case spoil you things and that you want to restore to it...

  http://support.Microsoft.com/kb/306084

  ... then...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Click the Advanced tab
  • Click the Environment Variables button
  • In the section system variables, click on path (you may need to scroll)
  • Click the button change

  Paths are separated by semicolons (;), is a path to % SystemRoot%\system32? If not, add one (make sure to separate with semicolon). Click OK (three times) to get out. Restart the computer and try again without the cd above command.

  Tricky

• Once a day, I lose all network connectivity on my Windows XP SP3 laptop. When I try to ping something I get this error: "PING failed, error 1450' code"

  Hello, those in about 3 days, I lose network connectivity on my laptop with Windows XP SP3. When I ping no matter what page of the console I get the following error message: show PING failed, error code 1450. I tried to use the option of repair in my area, but it did not help. Computer restart resolves the problem, but I'd like to avoid doing. What should I do to solve the problem?

  original title: loss of network connectivity

  Since this happen in two different ISP, try to reset your modem or router and also contact your ISP support. Some ISPS will set a rule and limitation of their user, but in your case, discuss it with your ISP, or contact technical support for your PC manufacturer.