Pinning is not working!

Similar Questions

• Cisco MSE 8510 MCU - comments PIN does not work

  Hello

  We have a few conferences on 8510 blade. Each conference is the main AXIS and the comments set up PIN. When I dial in the Conference, main SPINDLE works fine but the PIN prompt does not work.

  I tried to deal with the PIN of an endpoint, then the guest PIN from the other end, but the Conference does not accept the feedback PIN. I can use the good main SPINDLE on the two end points.

  Anyone know what may be the issue?

  I just tested this without 8510, no problem at all.

  Can you give us a screenshot of the configuration of your conference?

  I had used the same digital ID for Chair and comments, with a different PIN for each.  When I connected as Chairman, I went straight in.  When I connected as a guest, I went straight in, but I got a quick saying saying President to arrive or to connect.

• How can I check the balance on card iTunes so I do not buy anything yet? The PIN does not work.

  Hello

  I just bought a gift card to itunes, but I need to know how much I so I no longer spend. I found the place on my account to check your balance, but the P.I.N does not work. I have to buy something first?

  I don't want to make me pay my credit card I used my calculator to help out me on what I spend. If I spend less than $ 14 million for a $15 gift card I don't is not charged? I know that tax is included, so it may be more. I play the SimsFreeplay and I got to the point where everything is EXPENSIVE, and yes I used help and tips on what makes money and LPs, but I can't follow build things and try to get all of the timed quests done so I'm thinking maybe one or two times, help is ok.

  If anyone has any advice I would take.

  Jackie

  Follow the instructions here > see your iTunes credit balance

  'SimsFreeplay '.

  Be aware of In - App purchases > on in-app purchases

• wireless adapter is gone and the extension display not working after hibernation

  my laptop is a thinkpad X201s, os is windows 7, 32 bit, ultimate, English

  I used wireless home and my laptop is discharged, it is put into hibernation automatically

  the next day, I went to the office, plug power adapter and turn on the computer

  then I found wireless does not work, so I opened 'Control network and Internet\Network connections', there is no wireless icon. then I open "Device Manager", there is no wireless network adapter in network adapters

  and another bad thing is when I extend my screen with another monitor, the second screen shows nothing and the monitor does not work, it does not work in another computer, it seems necessary to fix. but it works before

  and I change a new monitor to connect my laptop display of the extension does not work, but the monitor can work in another computer, that's fine.

  and I restarted computer, no help.

  Finally I found the solution for wireless, first computer shutdown and plug-out the power adapter (it is very important), wait 30 seconds, then plug power adapter and restart the computer, wireless, great work

  now, the extension display function still does not work. I guess that the display extension PIN does not work, maybe need repaired

  Hi Jacky,.

  First of all we apologise for the late reply,
   
  As seems to be problems with the extension display port, I suggest you to contact the manufacturer of the computer.
  http://support.Lenovo.com/en_IN/feedback/contactsupport.page
   
  Please come back incase of any queries.
  Thank you
  Jayant.

• Taskbar not working / "pin to taskbar" option gone

  I have a reorganize my taskbar icon of tasks and removed from the taskbar windows Explorer. When I tried to pin it to the taskbar again (slide / move), he wouldn't PIN. then I tried right clicking on the icon to pin and the dialog box "pin to taskbar" had disappeared. now I can't pin anything on the taskbar by using a method at all.

  I did the 'quick launch' method to compensate for the lack of a taskbar to work, but I want my taskbar to return. all solutions?

  First I would try to re - select the Windows 7 theme:

  1. right click on your desktop and choose personalize.
  2. click on the theme of Windows 7 .

  If this does not work, a fundamental approach to "feature" is to use System Restore to restore your system to an earlier configuration when you caused the problem:

  1. Click Start , type System Restore in the search box, and then press enter.
  2 choose a restore point that dates to before the change.

  I hope this helps.

  -Christmas

• The adjustment brush does not work.  I choose and the pin code will appear on the image, but when I paint with it, nothing happens.  Even the mask won't show too much.

  I have Lr 5.7, the adjustment brush has stopped working.  I upgraded to Lr 6 and still an adjustment brush does not work on both versions (running on the same PC)

  I have antivirus programs and malware which have rubbed my machine, no problem.

  This is the first problem I encountered.  Seems to have worked very well last week, then all of a sudden this function is toast.

  Help.

  Press O to display the overlay that shows the painted mask.

  Make sure that the density and the flow is not set to 0.

• After your upgrade my Pinterest account not working well: pivot opens big enough and Pinterest warning is more than the double spindle.

  Two things happened the day you did upgrade to 28.0:
  1 - upgrade
  1. I received a message from this site: http://barisderin.com/?p=1861

  Now when I try to locate something of a web page - Twitter for example, pine box opens wide enough for me to click on "View" - I have to stretch both ways AND when I try to locate something I have already pinned, Pinterest Don't warn me that it is a duplicate.

  I can stretch the box, although it's annoying that I have - but is no longer, I am convinced that the PIN is not a duplicate, from another Web OR site of inside Pinterest as well. If I can't identify on Pinterest.com - it is useless for me.

  I want to emphasize that pinning is very well on the iPad - app - I do not use the tabs in Safari to pin - and I can't pin App App not sure if the box is opened wide enough, but he tells me I am pinning on a duplicate.

  I pin a lot of outside Pinterest so I really find these two situations to be a problem. Hope you can solve!

  Another thing I'm not sure - is where this site came to tell me that my Pinterest Button had been updated with success - is the part of your upgrade? I did nothing more to read the page and save the URL. It's on my screen when I came back to the PC after having turned it on.

  Thanks for any help you can give me!

  Donna Olson

  Hi pacearly,

  Thank you for your question, I understand that when you try to pin a site, the pin code window opens wide enough to make you click the PIN button. This sounds boring. I understand also that duplicates are not is more detected when trying to locate some Web sites. I also understand that this function works in safari but not Firefox.

  This looks like a job for Web compatibility team. This team is dedicated to helping the Firefox browser to make Web sites as they are supposed to. Please try a new profile to make sure this isn't a preference which is block this feature on the site by using the Profile Manager to create and delete profiles Firefox if it happens again please add your description of the problem and a capture of journal or the screenshot of the Web page on this site : http://dev.webcompat.com
  If you have any other questions on this subject, we are happy to help you.

  For more information on troubleshooting the addons:
  Thunderbird-Add-ons-frequently asked questions

• My HP laptop cooling fan does not work.

  Okay, so. I have a HP Pavilion 1145sg g6. It worked fine all morning, and then I put sleep temporarily (about ten to twenty minutes). When I went to turn it on, the screen was black and he said something along the lines of

  "the system has detected that a cooling fan does not work correctly. Suite operation is not recommended at this time... may result in unpredictable behavior that may result closed random, loss of data or damage the system as possible. »

  Then after a few seconds it stops completely. There is an option to continue with the summary of the system and I clicked once on it, but she didn't go through completely for allowing me to use my laptop properly (I arrived at my wallpaper and it stopped).

  This has never happened before, and I never had any problem with my laptop, like this before. I have had him since last August, and it worked pretty well through until today. Of course, the system sometimes, accused but nothing serious, for the most part just aggravating.

  How can I fix?

  Someone said here that they stung the fan with a hairpin and it started working. I took a toothpick and switched my laptop and tried to move the fan and the fan started WALLA on! I noticed that a lot of dust in there and that's probably the culprit first event hough I keep this laptop clean every day, this darn dust is sneaky and small. If you use a toothpick, make sure not to break anything especially the toothpick. last thing you want to do is cause more harm. Now that I think I don't remember when the last fan worked and if it wasn't for the message that popped up today I would not of the same notice I wasn't to hear the fan because last week I said "wow is not the substance of this portable super hot feeling", but I just thought that my fiance was simply playing games on the computer for too long and that's why he was hot. He never closes the computer off smh. in any case, I'm very happy I read this post of a person using the PIN to hair. That's what forums are all about. Help each other. I hope it works for you. Be gentle, try pushing the way fan propellers in clockwise. Use a flashlight to see if dust or anything like that is by the way to allow the fan to run its on.  I blew in the vents, but it did have almost all of the dust of the road.  All of these messages, it seems this is a common problem. Good luck

• need to install on the machine where IE does not work how?

  had to restore a machine running win7 pro 32-bit. IE does not work reinstall firefox can I do a disk or use a flash drive to install on this machine. How can I do?

  1. Download the Setup-> https://www.mozilla.org/en-US/firefox/all.html file
  2. Save flash, PIN, USB, key USB or transfer to it after the download is complete
  3. Transfer the installer on USB flash, PIN, USB, key to the system without browser
  4. Run the Setup program

  See-> http://support.mozilla.org/en-US/kb/Installing+Firefox

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Tecra M7 & express II PA3680E-1PRP port replicator do not work together

  Hello

  I ve a Toshiba tecra M7 in recent years and have just bought a brand new sealed express duplicator II model PA3680E (docking station) but unfortunately it does not work and a new replacement, sent by the provider does not work.

  What's happening:
  With docking station connected to the start; nothing happens, and the Green dock light stays off.

  Windows when I put the tecra m7 on the dock it connects and disconnects immediately then will not reconnect. The power of power port, the lan port and the power switch work on the dock, but I understand that these are just happening through connections. The Green led power lights up also for less than a second.

  For example, when I do a connection hot, windows is connection chime followed immediately by a chime of disconnection and restores, also all USB connected devices flick-on and immediately off the coast.

  I ve tried under the original Toshiba windows XP install (with the latest Toshiba) and a fresh install of windows 7 (fully updated with all the update from Toshiba). BIOS is the latest available 3.50 (also tried 1.70 & 3.20 bios). tried bios USB legacy on and outside.

  Can someone please help

  Hello

  > With docking station, connected to the start; nothing happens, and the Green dock light stays off.

  The green light that is placed near the eject button it lights up green during normal operation and must be extinguished if the phone has been disconnected.

  If the led does not light green, so I guess that the laptop is not connected correctly.

  If you connect the laptop for the first time to the port replicator, a message should appear stating the device connected to the port replicator are ready to use.

  In my opinion, there could be a problem with the pins or connectors, but the question is what may be touched connector: on the side of Tecra or port replicator

  However, I think that go you to your dealer and need to test another.

• DV9930US. internal Microphone does not work do not (Vista and Windows7)

  Hello

  I had my DV9930US for awhile, but until recently, I've not used the webcam or microphone internal.

  I am preparing for a trip, so I thought I'd see if I could get something like Skype Setup, but I find the internal mic doesn't seem to work (do not hear anything).   Audio output seems to work very well, and also if I plug an external microphone on taking forward, under the keyboard, which seems to work... it is just the internal microphones (there are two, I think, at the top of the screen, which surrounds the webcam) which do not work ...

  Everything looks ok in Device Manager.  Under 'Sound', I have "Realtek High Definition Audio".  The driver is dated 15/01/08, V6.0.1.5548.

  I tried to test it with sound recorder, I also tested the microphone 'configure', but it never shows all the bars and the Sound Recorder file records is essentially silent.

  I still have the original Vista Home Premium on this machine and also Windows 7 Ultimate (I double boot), and even the original Vista seems to have the same problem.

  I've seen a few posts here with problems with G60s, but no resolution, so I was wondering if anyone might know which

  Perhaps the problem is?

  Thank you!

  Jim

  Hello

  For the record, I finally found the problem.

  In the DV9930US, there is a small PCB (1 "x 1"), called the "of the power button.  This is the power button, and 3 pin connectors, as well as a flat cable connector.

  The microphones under the screen to connect to a 3 pinned connectors, and the flat cable is going, I think for the real sound card.

  I had replaced the pickups, which does not solve the problem, so I bought the replacement power button that fortunately, came with a new flat cable.

  It turned out that the original flat cable from the power button on the audio card was bad.

  I replaced the flat cable, and then worked the internal microphones.

  Jim

• Satellite M70 - screen does not work properly

  Hello world

  My screen on the laptop does not work correctly. He sometimes starts to white and becomes inadmissible. I followed the problem down, I think of what I can only describe as a fluorescent light ballast in the upper left of the screen (when looking from the front). If I use a clothes pin and apply steady pressure in the upper left corner, it is achievable. That is to say I can still use it.

  But barely.

  When disassemble the screen there is a kind of metal plate on the side of the screen and there is a part called electw f-1 94v-0 coming in contact with this piece of metal. My guess is that the two pieces have shorted or well have become loose such as tightening this part of the screen made it work again. There are discolorations burned on the piece of metal and the underlying aluminum backup that spans the entire screen. There is also a very slight discoloration burned on the play in question also.

  But as I said that the screen still works if I apply the necessary pressure in the upper left corner (currently with a clothes PIN).

  I have no money and cannot pay to have this problem so I have to come with an eraser he togetether solution myself or end without a laptop.

  What is this part? Part of 94v-0 f - 1 of the Electw? It is manufactured by Tyco Electronics, but in a search on their site I could not find it. And Googling shows up nothing important. There are two of these parties behind the screen on my Toshiba. The one on the right and one on the left.

  They are sodered to two sons, one black and one white that goes down to the area of FL Inverter.

  I know it's a long shot, but I wonder what that these pieces don't and if there is no hope for a temporary solution that will alleviate me of having to use a clothes pin in the upper left corner of the screen to get the screen to work. Perhaps by folding the parts to better contact with this or that. I tried to move a party earlier that helped a little but not much.

  It's got so bad that it sparkles now... a little constantly. Very annoying. But... still usable.

  Any input would be appreciated.

  Thank you.

  Carlos

  If the part is attached to the screen, then you will need to replace the LCD screen, or ask someone to fix it if possible.

  You can not buy the different parts of a strainer.

  If you are referring to the wiring harness/LCD screen, then you can buy a replacement at a cheap price. They are not expensive.

• Tecra S1: Rf Ubuntu wireless switch does not work

  Hi all

  I recently bought an Intel mini-PCI wifi card for my Tecra S1 under Ubuntu. It is detected without any problem, Intel provides even native drivers for Linux. However, the hardware to activate wireless switch does NOT work. According to iwconfig, the radio is off. I use the ipw2200 driver which can detect the hardware and the software rf_kill. I can enable and disable software killing RF, but kill him material stays on.

  I suspect that the radio feature is disabled in the BIOS but I don't have Windows running on the laptop over to change the setting. Is it possible to access BIOS options under linux? Toshutils are not supported by the tecra because she seems to have a Phoenix BIOS.

  I hope you can help!

  Edwin...

  Hello

  Tecra S1 supports BIOS Toshiba you can access BIOS by pressing ESC at the beginning of the startup.
  In any case I think you won't find anything in the BIOS.

  If you are not able to use the switch of material on the side of the laptop then the Wlan card is not compatible or the hardware switch is malfunctioning. I would say that the card is not supported.

  Maybe the insulation of the 13 pin might help please check that this son:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19843&MessageID=74074
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15228&MessageID=56522

• USB loader does not work with the Defy

  Hey people,

  I myself built a USB socket for installation in my car (in a plug for one of the slots to spare for switches). Technically, it's really simple with a voltage of 5V regulator which limits the 12V battery voltage to 5V for USB. Because I want to only use the sockets to recharge USB devices

  (iPod, phone, GPS,...) in the car, I left the data open pins. Today, I hung my little gadget up to a power supply of 12V, measured at the exit of the catch USB for correct voltage and polarity and then hung my Defy. Unfortunately, it does not work. I was pretty well clueless, what could be the issue so I asked some of my colleagues to hang their phone (HTC Desire, HTC Hero and HTC Desire HD), and each of them has worked well.

  Someone has any idea of what I need to do to get this working? He wants to talk to the USB to determine what port it is connected to a Motorola phone (for some reason any)?

  Thank you very much!

  Jan

  For your application, simply short-circuit the data pins.

• EliteBook 1020: External keyboard does not work in the form of Bitlocker

  We had a few HP 1020 and 1040: models recently, and all have the same question. When the laptop is connected, the external keyboard does not work in the form of Bitlocker. It works in the BIOS and in Windows itself, but not in Bitlocker. This means that we must open the laptop screen to enter the Bitlocker pin, then let it open and GPO that dictates the computer into hibernation when the lid is closed. We have twisted the GPO, but in vain. Anyone else seen elsewhere or a solution?

  If the bios is up to date, I would look at the BIOS settings. I think that Fast Boot is enabled in your case, this may cause usb devices not to see in the stadium that BitLocker requires