PIX501 VPN PPTP: I have to browse the internet side remote via my VPN server

Hello

IM using PPTP for remote access to my server VPN, its power remotely connect to LAN, but I did not have Internet access on the remote side is that I need...

IM using windows PPTP client and he has to select the "use default gateway on remote network": but still does not.

Could you help me, thanks in advance

Rolando

6.3 (5) PIX version
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
!
inside_access_in ip access list allow a whole
Note outside_access_in list of outdoor access
access-list outside_access_in allow icmp a whole
inside_outbound_nat0_acl ip access list allow any 192.168.1.200 255.255.255.248
pager lines 24
the history of logging alerts
ICMP allow all outside
Outside 1500 MTU
Within 1500 MTU
IP address outside of *. *. *. * 255.255.255.248
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP pool local remote_users 192.168.1.200 - 192.168.1.205
!
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 *. *. *. *
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
enable floodguard
Sysopt connection permit-pptp
Telnet timeout 5
SSH timeout 5
Console timeout 0
VPDN PPTP-VPDN-group accept dialin pptp
VPDN group PPTP-VPDN-GROUP ppp mschap authentication
VPDN group PPTP-VPDN-GROUP ppp encryption mppe auto
VPDN group configuration client PPTP-VPDN-GROUP address local remote_users
VPDN group VPDN GROUP-PPTP client configuration dns 200.57.2.108 200.57.7.61
VPDN group VPDN GROUP-PPTP pptp echo 60
VPDN group VPDN GROUP-PPTP client for local authentication
VPDN username * password *.
VPDN allow outside
VPDN allow inside
dhcpd address 192.168.1.100 - 192.168.1.199 inside
dhcpd dns 200.57.2.108 200.57.7.61
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside

The PIX cannot re - route traffic to the Internet because it's a feature supported on version 7.x and higher. You cannot execute code on PIX501 7.x.

You can send all traffic through the tunnel (for the PIX) and have the PIX route this traffic to a router internal (on the head), then rewritten the PIX to the Internet.

Federico.

Tags: Cisco Security

Similar Questions

  • Unable to browse the internet for the VPN (ASA5505 running 8.3)

    We have improved our ASA 5505 to 8.3 firmware image (2) and we have a working VPN configuration (customer VPN in Windows can connect and browse the network of the company as well as their local networks [split tunnel seems to work in this regard]).  However, some time connected they are unable to also browse the internet.  In our configuration of 8.2 (1) we have done 'something' to allow remote users to browse the internet at the same time, but apparently this is not transferred in the upgrade.

    I'm sure it's a simple nat our order routing, but it can't know.  I've gotta hit the road now but will post our config this afternoon if no one knows the "secret" to do.  Ideally, internet traffic to remote users out of their internet connection and not be achieved through the office.  We understand the risks associated with it.

    Hi Scott,.

    To the best of my knowledge, I don't think that l2tp over IPSec supports split tunneling. If you use the Cisco VPN client, you should be able to get this working.

    What we can do in this case is to set up turn on the SAA for these vpn clients. Please add the commands to run below:

    permit same-security-traffic intra-interface

    network of the NETWORK_OBJ_10.0.0.0_27 object

    dynamic NAT interface (outdoors, outdoor)

    Let me know if it helps!

    See you soon,.

    Assia

  • Unable to browse the internet while connected to the VPN

    Hi all..

    It was working fine until yesterday morning... Since then, I am not able to browse the internet it I am connected to the VPN... I get a "Page cannot be displayed" error message... the second that I disconnect VPN, I am able to browse internet... I did not change/facilities to do... help please...

    Thank you...

    Check to see if you can ping by IP address (make sure that the DNS information are properly learnt). Also try setting MTU interface to 1300 in case there is a change within the network of your ISP. What is mode NAT or NAT device not compatible?

  • PSAA9 satellite A100 - unable to browse the Internet

    Hello

    I reinstalled the operating system on a friends computer laptop A100, installation of WINXP pro.

    After I installed, I noticed that a lot of missing drivers so I scoured internet and downloaded most of them. The problem I have is that the ethernet connection seems to not work properly. I installed the driver on the toshiba site and hooked it up to a test network to my polytec.

    On this network to test an internet connection is available, but the laptop cannot browse the internet! I can ping other PC networking on mobile Internet sites and ping but cannot browse their IE. Other network PC cannot ping the laptop automatically obtained IP address.

    Any ideas what's happening?

    Hello!

    Have you tried another browser like Firefox? I don t use IE because Firefox is much faster and I can't get a large number of modules.

    In addition, you should try to disable the firewall on the laptop. Maybe it s blocks the internet connection or the internet browser.

    Last but not least try to use a static IP address. You can change this in the TCP/IP settings.

  • HP 15-f003dx: robotic sound on laptop while listening to music and browsing the Internet

    Hello

    I have a HP 15-f003dx and I have problems with the audio driver. Whenever I watch videos or listen to music while browsing the Internet, everything looks like a robot, and it's really bad. I already reinstalled the driver, updated the BIOS and tried the system restore and reformatted. Nothing else has worked.

    Here are my specs below:

    10 64-Bit Windows Home

    Processor: AMD A6 - 5200 APU with Radeon HD graphics card

    8 GB RAM

    Audio: Realtek High Definition Audio

    I'm running out of options. All the solutions to the current problem would be great, thanks.

    Hi @REL1983,

    Thank you for the update.

    I'm glad that the store has been able to solve the problem for you.

    Execution of the troubleshooter is a step I have provided, if you agree that it is your problem, you would be useful to the community by choosing accepted the solution to enable other posters locate information with greater ease.

    Thanks in advance.

  • Satellite A120 - loss of Performance after browsing the internet

    Hi all, Im currently new on Toshiba laptops, just got my first one. But this question is for my brother. There an A120 laptop with windows xp. His laptop is generally very well outside of slow down after browsing the internet for 5 minutes of the ish. Initially he sails very well, but then all of a sudden slowing down, but it's not just the internet, the laptop everything slows down, turning off takes a lot of time just like any other process. The internet works fine on all other devices, IE. other computers laptops, xbox, mobile phones etc. His ISP has confirmed that there is no problem with the internet.

    Anyone have any ideas? He has already reinstalled XP

    Who knows what's wrong there. Install CCleaner and clean OS every time before you turn off laptop.

    Might be time for a clean installation of the new OS if your brother use it for years.
    You know, we don t know what is preinstalled on it, which is running in the background and what personal configuration on this machine.

  • I don't have access to the internet

    Separated from this thread.

    I don't have access to the internet. How can I get it back

    What is internet access from the browser or the network connection? What do you have on the PC?

    Open a command prompt and try "ping google.com" and see if you get a response like below.

    Ping google.com [202.124.127.249] with 32 bytes of data:
    Reply from 202.124.127.249: bytes = 32 time = 1ms TTL = 60
    Reply from 202.124.127.249: bytes = 32 time<1ms ttl="">
    Reply from 202.124.127.249: bytes = 32 time = 1ms TTL = 60
    Reply from 202.124.127.249: bytes = 32 time<1ms ttl="">

    If the request has timed out, you may need to check the network connection and see what are the settings in network properties.

  • computer keeps restarting, against all odds, while I browse the internet

    How can I determine my type of memory to change?

    My computer keeps restarting, against all odds, while I browse the internet, I have advised me to try to change the memory card, but I do not know how to determine the type of card, I need. I have a Mirus counter top, and I'm running Windows XP SP3.

    Hi paulipaul,
     
    You can take any memory card (RAM-Random Access Memory), but make sure that it should be less than 4 GB. For the shoring of RAM to the motherboard you are using, refer to the manual of the computer.
     
    More information on:
  • Why not wmc7, like vista allow you to browse the internet on your TV for xbox 360

    original title: internet browser for xbox 360 using wmc7

    Why not wmc7, like vista allow you to browse the internet on your TV. I have the Extender plug.

    The Xbox 360 does not support Internet TV content. S.Sengupta Media Center MVP

  • Allowing internal users browse the internet

    Hello

    I have a PIX 515E with IOS 6.2. I am currently using ISA server as a proxy server to browse the internet. I would like to change this and allow users to browse the internet through the PIX firewall. This wud give me an additional IP address on the ISA server computer.

    Can you tell me what commands do I need.

    Hello

    Using the ACL (named in this case) you do the following:

    > access inside permit tcp host XXXX list any eq www

    > access inside tcp list deny any any eq www

    > ip-list access to the Interior for a whole

    .. now configure the ACL inside with a statement of the Group of access interface that is

    > group-access to the Interior in the interface inside

    (NOTE. IN THE FIRST ACL ABOVE XXXX IS YOUR IP OF ISA)

    In addition, after you set up the ACL make sure to a wr m (write to memory)

    Hope this helps-

  • all my icons that were normally at the bottom of the screen have migrated to the right side and are all bundled together how to place their return to the bott

    I recently bought a HP 15 laptop with 8.1. I use mainly desktop with latest Mozilla. All my icons that is usually found at the bottom of the screen have migrated to the right side of the screen and boots, to the top, I can't do your choice. I tried to customize without result. I am 75 but strive to keep abreast, but it baffled me.

    Sorry, it's a question of support of Windows, the Windows taskbar does not part of Firefox. I do not use Windows 8.1 myself, and I don't know if the process is the same as on my Windows XP - but maybe click and hold and drag this bar down might work like on Windows XP.

    If you do not understand what I said, or it does not work, here is a popular Windows 8 support forum that should be able to help you.
    http://www.eightforums.com/

  • My Firefox browser is unable to browse the internet

    Hey there! When I use Firefox to browse the internet I just get a screen that reads "it works!" Thoughts? I'm happy to send a screenshot of the screen.

    It started when I installed the module for HTTPS Everywhere.

    Problem solved. Embarrassing, I simply relied on tools "Clear recent history" and all selected. It works fine now.

  • When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.

    Original title: Windows Explorer announced.

    When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.  How can I stop this coming?

    I think I found a solution.  A very good actually, if it works.  I opened the adversiment. just a line in the upper part of the screen and goes to unsubscribe.  The line mentioned coupons that I'm not interested.

    He said that it takes several days to unsubscribe, so I don't know if it will work.

  • How can I download the drivers for a processor that crashed and does not have access to the internet

    How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

    How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

    First of all, please note that you mean a computer, not a cpu.  "CPU" means "Central processing unit". In modern personal computers, the CPU is a relatively small chip, an integrated circuit. It is located on the motherboard inside the computer case. It is not the case itself, nor is it the total computer, which includes the case and what it contains.

    Download drivers on another computer and put them on CD or thumb. Bring them to the computer in question, and then copy them there.

  • When browsing the internet I get the pop-up windows telling me that my computer is infected "bestantivirus2011."

    original title: bestantivirus2011

    Occasionally, when browsing the internet, I get a popup telling me that my computer is infected. Then it executes an ASNA and comes up with a long list of malware. When I click on remove all he wants me to install a file called "bestantivirus2011". research tells me that it is a scam. How can I remove it from my computer?

    Thank you, Jim B

    Hi, Rkill install and run. Do not restart or close Rkill.

    http://download.bleepingcomputer.com/grinler/rkill.com

    Install and scan with malwarebytes and remove any file that's find.

    http://www.Malwarebytes.org/MBAM.php

    Copy/old newspaper of malware in your next post.

Maybe you are looking for