PL5060N 50 '' plasma

Similar Questions

• HP PL5060N Plasma HDTV - part of the display of the image is black screen

  Our Plasma HDTV has suddenly stopped working properly. Nothing has been updated or changed. The left third of the picture is now just black screen. The image is not condensed somehow - showing just is no longer on this third. If I try to bring up a menu it also shows that 2/3 of the screen. Help, please! Thank you.

  Hello

  I think you have a few questions about it. There are two things that can cause this black: a buffer Board and the plasma panel itself. We are unable to determine what is the cause without putting the Council of the buffer in the game. If the buffer Board solves the problem so you can use your TV again. If it does not solve the problem then the plasma itself Panel is bad and the tv will be trashed, not repairable.

  Now, it is still under warranty? If Yes, call HP otherwise with the current prices of plasma TV, buy a new one might be cheaper.

  Kind regards.

• Apple TV is compatible for use with HDMI Panasonic plasma TV model TH 50PX70A 2007?

  Apple TV is compatible for use with HDMI Panasonic plasma TV model TH 50PX70A 2007?

  Yes

• Somehow my new Apple TV 4 causes my Panasonic Plasma TV turns off every 30 to 60 minutes.

  Somehow my new Apple TV 4 causes my Panasonic Plasma TV turns off every 30 to 60 minutes. I thought for sure I had capacitor problems with my TV (he is about five years old) but my wife suggested to check our new ATV4 because the problem started just after Christmas when we got the new ATV4 and the problem occurs with our ATV3. I was skeptical but I have tried to unplug the power cord on the ATV4 and to my surprise the TV cutting question disappeared, so I have to have my ATV4 unplugged when not in use and plug it in when I want to use it, a real pain in the *. If accidentally, I forgot to unplug my ATV4 after using my TV stops every 30 to 60 minutes after my ATV4 is connected and not in use. I'm at a complete loss as to what is causing this problem. For any help or suggestion would be appreciated.

  ATV turns off after a certain period of time in the settings: http://help.apple.com/appletv/#/atvb7a7550e3

  The ATV also has the ability to control the power of the TV via the HDMI cable, if the value.

  I will try to put the ATV to sleep immediately after use, as explained above and see if the TV turns off then.

  If so, go into the settings, remote controls and disable control of your home with remote control entertainment system and see if only he stops.

  When the TV turns off, it is on the entry of Apple TV and the screen saver or you look at another entrance, for example, a cable?

• Qosmio G30 - no sound output HDMI with Plasma

  Hello

  I tried to coonect my g30 with a Plasma TV, I get that video without sound

  I changed my defult for digital output device (SPDIF Out) device, but it did not help

  I don't have that in playback devices is:
  Speakers / headphones
  Digital output device (SPDIF)

  Help, please

  Hello

  I don't know what Qosmio G30 exactly do you have and what operating system is preinstalled but maybe that this document can help you:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  Check it out!

• How to connect a plasma panel digitally to Qosmio F10-130

  Hello

  I just orderer F10-130 and I would like to connect my Panel plasma with a digital video signal. The monitor has a DVI input and the F10 has a'D-video out' so-called interface I've ever seen elsewhere. What is the best way to connect the two devices? I know D - Sub or S-video VGA should work, but IMHO, it is not state of the art. A D-Video/DVI adapter exist?

  Kind regards
  Marsu

  [Edited by: admin 14 March 05 21:12]

  Hi marsu

  Connection D Qosmio port, you can connect to the TV SCART port. The cable is supplied with the laptop Qosmio. Sorry, but I think that there is no ability to connect to the DVI port on your TV.

  The only thing you can do is ask some experts in electronic stores if there is a solution for this problem.

• Can't play BluRay from PC via HDMI on plasma TV

  Im having a problem playing a bluray to PC via HDMI on the sanyo plasma TV

  Introduction page of the fine BD functions with the sound, but the actual sound when the movie plays dosent work.

  Someone at - it ideas

  Hello

  Pleas check contrl Panel-> sound-> read if HDMI has been defined by default.
  This is necessary if you want to have the sound of the TV connected to the laptop via a HDMI cable.

  Welcome them

• Output suitable for Satellite P205-S6267 cable available to connect to an HD Plasma TV?

  This is my first post. I'm not very well informed about computers.
  I have a laptop Toshiba Satellite P205-S6267 which according to the manual, is supposed to be able to read any DVD HD. I just bought a Samsung 50 "plasma TV model #PN50A400C2DXZA from Sears and it notes that a PC can be connected via a cable, but does not exactly what type of cable is needed.

  My question is: the Toshiba has a port "S-video (TV-out)", but the manual Samsung TV shows only two ports of entry that can be used to connect a PC: 1. a D - Sub cable with Audio output of the PC cable and 2. a HDMI/DVI cable with 3.5 mm stereo/2RCA cable.

  Can anyone suggest exactly what kind of cable I need to buy to connect the Toshiba PC to the Samsung TV to use the TV works like a PC monitor?

  If there is a cable that works, the TV shows PC output in high definition?
  Thank you
  Jim

  Hello Jim

  I tried searching in Google which TV you have exactly, but I didn't have success.
  Can you please post exact description of the TV model?

  In any case, all new TVs have several different ports on the back. In General, you can use most of them. The question is which ports on your laptop TV output.
  According to the specifications of the laptop, your laptop has an S-video output port. The same port should be available on TV also. If this isn't the case, you can use the S-Video/RCA cable. RCA yellow port must be available on your TV.

  With this single image of cable can be sent to the TV but no sound.
  High definition signal can be sent by HDMI cable only but your laptop hasn t this port.

  If you have any other questions please post again, or ask in the nearest electronic store. I don't know that they can show you all the cables and adapters, you can use to connect your Satellite to the new TV.

  Good luck!

• Where can I connect the headphones wireless at the back of the plasma LG tv? Need to Add ' l. wire?

  Helmet model # is MDR-RF985RK 900 mhz.

  Where to connect to the back of the plasma tv?

  Hi Carl84Rossi,

  Detailed instructions as well as the pictorial representation to connect the headphones to the TV are mentioned on the link below:

• How to connect the Qosmio G20 to screen plasma HD

  Hello... I'm so confused! ... Please can someone advise me... Read all the posts on this... What is the best way to connect G20 - 139 running Vista Home to a Plasma HD? ........ Can I buy a D-video to HDMI Cable (searched on the net but not sure of what I seek in a cable... (LOL)... any help please... I am not an expert!

  Hello

  If you have time please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=11821

  For me, it is very interesting and you can find a very interesting discussion on the Qosmio G20 to connect to an HD-ready LCD TV.

  Good luck!

• Qosmio G20 - 127 connection with plasma TV

  What is the best way to connect the Qosmio G20-127 with plasma Panasonic TV? Plasma TV has HDMI port. Should what cable I be able to connect to the HDMI port?

  Hello

  The Qosmio G20-127 supports a component port (D-video output port)
  You can connect you laptop to TV with a D-video cable.
  You can google a bit and you will find a lot of offers.

• Satellite A300/Y00 - connect to the Plasma TV?

  Is it possible that my satellite A300/Y00 to connect to my plasma 50 inches, if so, what cable should I buy?

  THX

  Hey Buddy,

  Why it would not be possible?

  Satellite A300 and all Plasma/LCD TVs are generally equipped with HDMI port. So just buy a HDMI to connect your laptop and TV cable.
  HDMI cable transfers audio and video signals so only one cable is needed.

  Lastly but not the least of using FN + F5 secret key you can switch between monitors. :)

• Also someone can enlighten please... why some DVDs burn work on local plasma screens in the buildings of the Council?

  Also someone can enlighten please... why some DVDs burn work on local plasma screens in the buildings of the Council?

  Also someone can enlighten please... why some DVDs burn work on local plasma screens in the buildings of the Council?

  ==================================
  Hard to say exactly... but it may be worth trying to use
  another brand of draft DVD and the slower burning speeds.

  Check the support site for your DVD burner... they can
  offer suggestions on the DVD blanks to use.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Video of Plasma to laptop

  I have a portable Ibm R50e under Microsoft Vista. I need to get the video from my plasma?
  Panasonic TH-42PX750

  Connect your laptop to your plasma using a video output on the laptop, as you can to get a video on the plasma display.  Maybe you have a VGA output and a VGA input - get a cable, Plug and change your display settings so that it reflects or extend your desktop to the plasma.

  Worst case, you may need an adapter for your laptop video output (or plasma video in) make a cable works.

• CAN'T CONNECT THE LAPTOP TO SCREEN PLASMA (2011 MODEL)

  IAM using win - xp on laptop hp and panasonic plasma tv, iam trying to connect these two via vga cable, but after plugging also iam get no matter what display on TV screen, I made an adjustment on the properties of the display (according to my knowledge) but still the same. IAM trying to click on "identify" # 2 icon on the display properties, but the screen comes up as # 1 only.  I made all the mistakes to and trial, even on the options "advance" with Intel(r) graphics media accelerator driver for mobile, but it is always the same.  Please help me solve the problem since the basic settings.

  Thanks in advance

  Hello

  Method 1:

  Follow the steps in the article that talks about how to configure multiple monitor in Windows XP:

  http://support.Microsoft.com/kb/307873

  Method 2:

  I also suggest update you the graphics driver and check if it helps:

  http://support.Microsoft.com/kb/283658

  Reference: http://support.microsoft.com/kb/319908

  Method 3:

  You can also download and install the latest driver for the graphics card from Intel site.

  http://www.Intel.com/p/en_US/support/detect/