place, trace, expand and race - stuck on the race

Similar Questions

• Laptop stops randomly and gets stuck on the saving settings

  Basically, we have some laptops 10 + this will stop randomly and get stuck on the "saving settings screens.

  Here are the different models of toshiba R500-R600 M10 M9 M5

  We changed versions of bios etc, reimagee them, even used an image of windows xp disc rather than soe.

  Hardware tests OK and customers do not something in particular, some when others when you connect using applications office, back in after a while. Some use docking stations, others not.

  All ideas

  Hello

  Just a question: are you an authorized service provider?
  I ask this question because it looks like you are an ASP because you have so many laptops and you have tested different things.

  It's really hard to say what the reason is for this but I think that in this case, you should contact Toshiba directly. Maybe it s a known issue and it can be fixed in a few minutes.
  So ask for it and wait for a response.

• IPhone crashed the Middle updated and now stuck on the setting of the screen!

  My Iphone has been unusually slow. So I tried to update my phone I thought it's maybe the old version of the IOS that makes my phone lag (I think I downloaded the latest version, 10. something). While trying to update my phone, it crashed at halfway. Now I'm stuck on the screen that appears when your phone has been updated (white background, that invites you to enter the password and put in place). However, after putting in my access code and attempts to connect to the wifi, my phone indicates that the wifi password is incorrect, this is not. Also, when I try to connect through mobile data it shows that "your phone could not be activated because the activation server is not reachable. Try to connect your iphone to iTunes to activate it, or try via the mobile connection in a few minutes... ». As a result, I tried connecting to ITunes and I got a different view of error message saying "ITunes only could not connect to this iphone." An unknown error occurred (0xE8000015).

  Help, please!

  Try If you can to update or restore your iPad, iPhone or iPod touch - Apple Support.

  TT2

• HP Jet 7 - has crashed and now stuck on the screen "the HP BIOS update.

  "bought this tablet for my MOM as a birthday present on Sunday, February 28, 15 and now not even a week later the * beep * thing is stuck on the update of the HP BIOS" screen... what the f is this

  The solution is here, you need to run your battery all down until it resets the CMOS.

• Windows Live Mail sends several emails to the recipient and gets stuck in the Outbox

  My windows live mail sends multiple messages for one of my email accounts (and only one). It seems stuck in the Outbox and not appear in my sent items folder, but the buyer complains to receive up to 25 times. I uninstalled norton antivirus completely because I've heard of a similar problem with outlook, but have seen no improvement. Please help, it's making me look very unprofessional. I tried same emailing with my current antivirus disabled, but have not seen any improvement.

  Windows Live Mail questions belong here: http://windowslivehelp.com/product.aspx?productid=15

• Why my download of Creative Cloud box keep saying and is stuck on the "connect to Server"?

  I just bought a pack of cigarettes and of course in order to download the applications I need to have creative Cloud. Creative cloud has been download/load on my laptop ASUS for 15-20 minutes and is still stuck on the first 5% and says "connection to the server. Surely no time this this or is their a problem on my side?

  log out and then back to your office of cc with the help of the adobe id to subscribe, sign, sign in | Creative Office Cloud app

  If you always connect after that, sign, activation, or connection errors. CS5.5 and later

• Forgot password and now stuck to the 'Upgrade Coup'

  Last night, I installed a password before going to sleep because my brother mess with her when I'm asleep and when I woke up I forgot my password more. Reviewed online for solutions and I tried to restore and now I'm stuck on 'Shot of Upgrade' with a forgotten password and iTunes will not access the iPhone unless I unlock it.

  1 - put the device in DFU mode.

  STEPS FOR DFU MODE

  Hold the Power button (4 seconds)

  Continue to hold the power button and also has the home button (20 seconds)

  Release the power button while continuing to press the home button (10 seconds)

  Your device should prompt with the "Connect to iTunes screen.

  2 - plug it into your computer and open iTunes. It will ask whether to restore and update or restore manually by following these steps.

  the steps restore to iOS

  Before you restore:

  Make sure you use the latest version of iTunes.

  Back up your device.

  Transfer and synchronize content on your computer.

  Restore your iOS device

  Connect your device to your computer.

  When it appears in iTunes, select your iPhone, iPad or iPod touch. Select the Summary tab, and then click Restore.

  Click on restore.

  After a restore, the iOS device restarts. You should see "slide to put in place". Follow the steps in the wizard to install iOS.

  Restore your device from an iCloud or iTunes backup - Apple Support

• I got my Vista home premium 32 bit for 5 years, s and never stuck to the configuration of stage 3 of 3. Help PLZ its updates since 08/01/13 in this way?

  Hello, I hope someone can help me if I can use my lovely Vista Home premium 32 but the computer again. its driving me crazy why I'm stuck in stage 3 of 3 to 0% for 18-13 configuration updates. THA last 5 years I've never had a problem finishing to get updates. Now that I've seen other ppl having it stuck in this loop and cannot go out for a long time and microsoft did not have a fix for that update.  But I have a gateway GM5420 desktop and I'm not that good at any issuss of fixing software happens to me from time to time. but it's the one worts. I read KB949358 and I can't do most of the fixes here. And I tried all F8 functions and they will all go back to the configuration of stage 3 of 3. and I have trired a few things on F2, F10 and start the computer it always goes back to configuration of stage 3 of 3 0%... Can someone please give me some instructions step by step on how to fix this so I can use my nice vista office because I have a lot of things on the hard drive, I don't want to just throw in a way. There must be an easy fix now?  I hope I get any help because I am a 100% disabled Vet. and just can't come out and put down 600 at 1000.00 for another beauty of desktop computers. I have Toulouse each all evry one of your help so that I can go beyond this configuration step 3 of 3 to 0 5 from 08/01/13... Thanks for any help? !!

  I had this problem for 3 days
  No matter what I do it will not go beyond the screen "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer.
  I even tried boot to Disc... Please help. I need to get to school papers that he

• The screen expands and shrinks everything using the touchpad.

  Original title: touchpad on my laptop widens and narrows the view apparently at random. How can I control that?

  Sometimes when I slide my finger on the touch pad to move the cursor appears a magnifying glass icon and my view zoomed or shrinks. I don't know what triggers. It is extremely annoying. I want to know how to control this function

  Check the options on the settings of your touchpad, its nothing to do with win7 itself

• Denial of world App because of icon and app stuck on the first page

  I recently submitted my application for approval, but I got the same problems of feedback twice now:

  -After the installation of your application on BlackBerry Z10, Q10, Z30, there is the icon of the application is / mark questions. If you use our Eclipse plugin, please check your BlackBerry_App_Descriptor.xml file and make sure that you correctly specify your custom application icon
  -When typing your app, application pasted on the first page. Please make sure that your app work correctly.

  I have included a custom icon specified in the configuration file with the .

  I have also run the application on my device dev-alpha with no problems. The screenshot that I received the first time in support of BB showed no bar to future Action to exit the splash screen; However, when I run the app on my dev-alpha device I am able to see the action bar and navigate to my three monitors.

  Someone else has experience this problem?

  There is no such thing as all my code to inspect at github

  Thanks in advance for the help.

  Hello

  What version of OS are you running on your device?

  The action bar is probably due to an outdated version of bbUI.js be used. Currently using:
  https://github.com/InnovateorDieOnline/Bote/BLOB/master/index.html#L11

  Which is: bbUI VERSION: 0.9.6.15

  So that the most recent:
  https://github.com/BlackBerry/bbUI.js/BLOB/master/pkg/BB10/BBUI-min.js

  Is actually: bbUI BB10 version: 0.9.6.889

  There are a number of BBUI updates that were needed to support future versions of 10.1 and 10.2. Probably an update to your library BBUI is necessary.

  Regarding the app icon, I don't know exactly. If you are ready to send me your record of BAR ([email protected]), I can verify that the config.xml file / BAR descriptor are configured correctly.

• I forgot my password for the administrator account and am stuck on the comments! Reset the password.

  I just changed my password of the Admin account as my fraping friends keep me, I chose a very long password, but he forgot the moment I got to the school house.  I now have only the available Guest account.  What should I do? Help, please.

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you changed the password.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Printer and job stuck in the machine

  I have windows 7 64 bit and a HP Laserjet 1022.

  Everything worked normally until yesterday. I tried to print a PDF file and the spooler does not work anymore.  Could not cancel printing. Spooler restarted and after a few tries (start stop restart), I was able to delete the printer.

  When I reinstalled the printer (after a cold start) pasted work reappeared in the queue. Tried to run fixit, no joy. FixIt has reported the correction of a problem, Windows would not print to the printer.

  Any thoughts?

  It turned out that there was a problem with the PDF file. It appeared when I tried to print using another computer and a printer.

  Although a virus scan detected nothing wrong, deleted the file from the machine as soon as I was able to delete the printer, clear the queue, reinstall the printer and everything worked again.

  I have never seen anything like this before.

• When I send a message it gets stuck in the Outbox and won't unless I click on the message until it is "BOLD" with a print, then delete.

  Forwarded messages or new messages are not automatically leave and get stuck in the Outbox.  If I leave it alone, I get a message that there was an error and the message could not be sent.  However, if I leave the message stuck in the Outbox, the message gets actually released several times until I have go into the Outbox and delete the message.

  Compacting files try one at a time.

  To defragment:

  Start | All programs | Accessories | System Tools | Disk Defragmenter. Just above that you'll also see disk cleanup. I was running first and also in the other Options tab, the third option to get rid of old that take place of restore points.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• the mouse cursor suddenly began to be stuck at the edge of the top or bottom of the screen.

  using Win 7 and all of a sudden today the mouse cursor would not and was stuck at the bottom or top of my edge of the screen.  I tried several different mice, both wireless and wired without result.  I rebooted several times and made a thinking system restore date was also a problem. I looked everywhere for a solution and can not find a.  I don't think it is specific drive due to different types of mouse, I've tried.

  Help!

  Hi RussCFP,
   
  1. have you installed the latest drivers for the mouse on your computer?
  2 did you check for any yellow exclamation point in Device Manager?
  3. other USB devices work properly?

  Method 1:

  I suggest to start in safe mode and check that the device.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode 
  Method 2:

  Try to run the troubleshooter and check.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   
  Method 3:
  
  Try to uninstall and reinstall the drivers for the mouse on your computer, to do that follow the steps below.
   
  a. Click Start and then click Control Panel.
  b. double-click System.
  c. click on the Hardware tab.
  d. click on Device Manager.
  e. expand mice and other pointing devices.
  f. right click on the device IntelliMouse that you want to delete and then click on uninstall.
  When the confirmation message appears, click Yes.
  Note Your mouse does not work at this stage.
  g. restart the computer.
   
  When your computer restarts, Microsoft Windows automatically detects the hardware change.
  Install the mouse driver and check its operation.
   
  Contact your hardware manufacturer for the latest drivers for your mouse.
  

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• When I try to compose an email, simply consist of window icon stuck in the taskbar windows cannot really expand and use it

  OK, the details of installation below, so when I try to compose an email, I just get a new message window icon stuck in windows
  taskbar cannot really expand and use it. If I reboot in safe mode with all the addons disabled, then it works fine. But
  If I restart normally and manually disable addons/plugins, then close and restart normally IE mode unsecured, it
  breaks, so doesn't seem to be an addon or plugin, but rather something with the configuration.

  Application Basics
  

  Name Thunderbird
  Version 31.6.0
  User Agent Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Thunderbird/31.6.0
  Profile folder
  See file
  (Local disk)
  Application version identifier 20150330093429
  Permit Plugins about: plugins
  Build configuration about: buildconfig
  Memory usage on: memory
  Mail and News accounts
  Outgoing server ID incoming servers
  Connection security name authentication security name connection default authentication method?
  Account2 (no) plain passwordCleartext of local records
  account3 (nntp) news.mozilla.org:119 passwordCleartext plain stbeehive.oracle.com:465 SSL passwordCleartext set to true
  account5 (imap) stbeehive.oracle.com:993 SSL stbeehive.oracle.com:465 SSL passwordCleartext true passwordCleartext
  Incident reports
  ID of the report
  BP-0a8986d2-ff0c-41C3-9da6-e770e2141224 24/12/2014
  BP-01f44ba7-3143-4452-AC98-981b62140123 23/01/2014
  Extensions
  Name enabled Version ID
  British English Dictionary 1.19.1 false [email protected]
  3.3.3 lightning {e2fda1a4-762b-4020-b5ad-a41df1933103} false
  Oracle Beehive Extensions for Thunderbird (OracleInternal) 1.0.0.5 false [email protected]
  Important change preferences
  Value name
  accessibility.typeaheadfind.flashBar 0
  Browser.cache.Disk.Capacity 358400
  Browser.cache.Disk.smart_size_cached_value 358400
  Fake Browser.cache.Disk.smart_size.first_run
  Fake Browser.cache.Disk.smart_size.use_old_max
  extensions.lastAppVersion 31.6.0
  fake font.internaluseonly.Changed
  make. Name.monospace.El Consolas
  font.name.monospace.tr Consolas
  make. Name.monospace.x - baltic Consolas
  make. Name.monospace.x - Central-euro Consolas
  make. Name.monospace.x - cyrillic Consolas
  make. Name.monospace.x - unicode Consolas
  make. Name.monospace.x - West Consolas
  make. Name.sans - serif.el Calibri
  font.name.sans - serif.tr Calibri
  make. Name.sans - serif.x - Baltic Calibri
  make. Name.sans - serif.x - Central-euro Calibri
  make. Name.sans - serif.x - cyrillic Calibri
  make. Name.sans - serif.x - unicode Calibri
  make. Name.sans - serif.x - western Calibri
  make. Name.Serif.El Cambria
  font.name.serif.tr Cambria
  make. Name.Serif.x - baltic Cambria
  make. Name.Serif.x - Central-euro Cambria
  make. Name.Serif.x - cyrillic Cambria
  make. Name.Serif.x - unicode Cambria
  make. Name.Serif.x - West Cambria
  make. Size.Fixed.El 14
  font.size.fixed.tr 14
  14 are. Size.Fixed.x - Baltic
  make. Size.Fixed.x - Central-euro 14
  14 are. Size.Fixed.x - cyrillic
  make. Size.Fixed.x - unicode 14
  14 are. Size.Fixed.x - West
  make. Size.variable.El 17
  font.size.variable.tr 17
  17 do. Size.variable.x - Baltic
  make. Size.variable.x - Central-euro 17
  17 do. Size.variable.x - cyrillic
  make. Size.variable.x - unicode 17
  17 do. Size.variable.x - West
  gfx.blacklist.Suggested - driver-version 257.21
  mail.openMessageBehavior.version 1
  true mail.winsearch.firstRunDone
  mailnews. Database.global.datastore.ID 8 d 997817 CEE1-4f16-aa36-008d5baeb30
  Mailnews. Fake Database.global.indexer.Enabled
  true network.cookie.prefsMigrated
  Network.TCP.sendbuffer 65536
  places.database.lastMaintenance 1429004341
  places. History.expiration.transient_current_max_pages 78789
  plugin.disable_full_page_plugin_for_types application/pdf
  true plugin.importedState
  plugin. State.Flash 0
  plugin. State.Java 0
  plugin. State.np32dsw 0
  plugin. State.npatgpc 0
  plugin. State.npctrl 0
  plugin. State.npdeployjava 0
  plugin. State.npfoxitreaderplugin 0
  plugin. State.npgeplugin 0
  plugin. State.npgoogleupdate 0
  plugin. State.npitunes 0
  plugin. State.npoff 0
  plugin. State.npqtplugin 0
  plugin. State.nprlsecurepluginlayer 0
  plugin. State.npunity3d 0
  plugin. State.npwatweb 0
  plugin. State.npwlpg 0
  true plugins.update.notifyUser
  Graphics
  Adapter Description NVIDIA Quadro FX 580
  Vendor ID 0x10de
  Device ID 0 x 0659
  RAM 512 MB card
  Adapter drivers nvd3dum nvwgf2um, nvwgf2um
  8.15.11.9038 driver version
  14/07/2009 driver date
  Active Direct2D blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  Fake license DirectWrite (6.2.9200.16571)
  Gamma settings ClearType: 2200 Pixel Structure: R
  WebGL Renderer blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  GPU accelerated Windows 0. Blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  Skiing AzureCanvasBackend
  AzureSkiaAccelerated 0
  AzureFallbackCanvasBackend Cairo
  AzureContentBackend Cairo
  JavaScript
  Incremental GC 1
  Accessibility
  0 Active
  Prevent accessibility 0
  Versions of the library
  Minimum version expected Version in use
  NSPR 4.10.6 4.10.6
  NSS 3.16.2.3 ECC base 3.16.2.3 base ECC
  Util NSS 3.16.2.3 3.16.2.3
  NSS SSL 3.16.2.3 ECC base 3.16.2.3 base ECC
  S/MIME 3.16.2.3 NSS ECC base 3.16.2.3 base ECC

  Noticed in the information provided:
  Graphics adapt Description NVIDIA Quadro FX 580
  Vendor ID 0x10de
  Device ID 0 x 0659
  RAM 512 MB card
  Adapter drivers nvd3dum nvwgf2um, nvwgf2um
  8.15.11.9038 driver version
  14/07/2009 driver date
  Active Direct2D blocked for your version of the graphics driver.
  Try to update your driver graphics version 257.21 or newer.

  You can update your graphics driver and retest.