Planning, estimation of the disk and memory requirements

Similar Questions

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• 'the disk check utility requires exclusive access to Windows__files on disk' (my hard drive). "Re-start of Windows. __

  FAILED: attempt recovery of bad sectors (disk hard C)

  I followed the instructions to increase the speed of the PC on the home screen of the box to highlight the function of microsoft.com.

  I could access the program successfully on my home screen (Windows XP Edition family version 5.1 service pack 3.0).  Phase 1 of the scan completed successfully, but about 70% through the phase 2, the analysis stopped and I got this message: "the disk check utility requires exclusive access to some Windows files on the disk.  These are accessible only by re-starting Windows. "   I was in charge of restarting my computer and repeat the test.  I did this, but got the same message several times in a row.

  I use the MS Update center regularly, my Windows XP software has been certified 3 times as being Windows genuine, and I update MS Security Essentials at least every 2 days.  I DON'T KNOW WHAT ELSE TO TRY!  As a general rule, ALL my other Windows functions work correctly & completely of my home screen.

  I also welcome Microsoft to have remote access to my computer, so that they can analyze & fix problems as well hardware & software automatically or from the center of MS Fix - IT.

  Please contact me at * address email is removed from the privacy * with specific instructions.  I'll try the center of update every day, where you will find all items that can be downloaded to fix this thank you for your continued support.  Joy Knobloch

  UPDATE WE CHECK DISK: 2 responses of PML & TWELCH were marked as possible answers.  After you schedule a check disk and shut down your computer, you must WAIT an hour or two before starting.  There is perhaps a long line of users waiting to get their audited records!  I finally managed to get the disk to run check (I also checked the box that says automatically correct errors).  BUT I NEVER GOT A CONFIRMATION MESSAGE THAT DIRECTLY STATED THAT ANY "BAD SECTORS" HAD BEEN RE-COVERED.

  LAST QUESTION: Can we assume that if the disk check ran completely and automatically corrected "problems", that the "DEFECTIVE SECTORS" have been found?

  Thanks to everyone who participated in this forum.  E-mail address is removed from the privacy *.

  It is not clear what you were / are doing.  Try this:

  Start > run > chkdsk /f > OK

  A box appears with the following message:

  The type of the file system is NTFS.
  Cannot lock the current drive.

  Chkdsk cannot run because the volume is in use by
  process.  You want to schedule this volume t
  check the next time the system restarts? (Y/N)

  Type Y and press ENTER.  Then, restart the computer.

  If, during the process that follows, you still receive the message "FAILED: attempt recovery of bad sectors (disk hard C)" or something similar, go to the website of the manufacturer of your drive hard drive and download the appropriate for your hard drive diagnostic tool.

  I also welcome Microsoft to have remote access to my computer, so that they can analyze & fix problems as well hardware & software automatically or from the center of MS Fix - IT.

  Unless you allowed to access remotely in accordance with a phone call to the support of MicrosoftTHAT YOU HAVE MOMENTUM, you must disable the remote access and Remote Desktop (right click on post work, select Properties, click on the 'Remote' tab).  In fact, you must disable these features now and only reactivate if still initiate you a phone call to technical support Microsoft and will need to enable them.

• Script to get the disk and LUN informaiton

  Hi all

  I have the list of virtual machines on servers different vCente and I need to get the disk and LUN information for the list of virtual machines.

  Help me build the script?

  Kind regards

  Vijay

  $Information = @)

  $Vminfo = get - VM | Select-Object *, @{N = "Hard drives"; E={$_ | Get-HardDisk}}, @{N = "HDDcount"; E={($_ | (Get-harddisk).length}}

  $vmlist = $Vminfo | Sort-Object-down HDDcount

  {foreach ($vm to $vmlist)

  #$Harddiskinfo = $vm | Get-hard drive

  $props = new-Object PSObject

  $props | Add-member-name "Folder" - Membertype NoteProperty-value $vm.folder

  $props | Add-member-name "VMName" - Membertype NoteProperty-value $vm. Name

  $props | Add-Member-name "vCPUs" - Membertype NoteProperty-value $vm. NumCpu

  $props | Add-member-name "Memory (GB)" - Membertype NoteProperty-value $vm. MemoryGB

  $DiskNum = 0

  foreach ($hdd in $vm. Hard drives) {}

  $controllerinfo = $hdd. ExtensionData

  $datastoreName = $($hdd.) Filename.Substring (1) - split ("]" ")) [0]

  $datastoreinfo = get-$datastoreName data store

  $controllerkey = $controllerinfo.controllerkey.tostring)

  $keycount = ($controllerkey |)  measure-object-character | Select-Object - expandproperty Characters) m:System.NET.SocketAddress.ToString)

  $virtualID = "{0}: {1}: {2} ' f $controllerkey.substring (0,1), $controllerkey.substring ($keycount - 1), $hdd. ExtensionData.Unitnumber

  $props | Add-Member-name "Disk scsiID$ ($DiskNum) '-Membertype NoteProperty-value $virtualID

  $props | Add-member-name "$($DiskNum) hard disk drive"-Membertype NoteProperty-value $hdd. Name

  $props | Add-member-name "Disk$ ($DiskNum) Size (GB)"-Membertype NoteProperty-value $hdd. CapacityGB

  $props | Add-member-name "$($DiskNum) DatastoreName disc"-Membertype NoteProperty-value $datastoreName

  $props | Add-member-name "$($DiskNum) DatastoreSize disc"-Membertype NoteProperty-value $datastoreinfo. CapacityGB

  $props | Add-member-name "$($DiskNum) DatastoreFreeSpace disc"-Membertype NoteProperty-value $datastoreinfo. FreeSpaceGB

  $DiskNum ++

  }

  $Information += $props

  }

  $Information | Out-GridView

• Satellite 2140CDS: message: "insert the disk and press a key".

  Hello

  I got this laptop but the necessary update. I tried to put a master drive from my other laptop to update and it came with 'error' and now when I turned it back on it does nothing about it, totally blank and rpet "insert the disk and press a key".

  I've got everything I can think but still can not do anything.

  Please can someone help?

  Hello

  What do you mean with master drive? Do you mean the Toshiba Recovery CD or what?

  It seems that the laptop can not find a source of seed and so this message appears on the screen!

  If you use a FDD drive please check if the disk has been removed.

  You must simply insert your Toshiba Recovery CD and boot from the CD/DVD drive. That's all.

  PS: Check if the HARD drive isn't too bad, as if the internal HARD drive is malfunctioning you will not be able to reinstall the OS from the CD

• I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

  I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
  OS El Capitan

  This can help:

  Reboot safe mode (it is a slow process):

  -stop of the mac

  -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

  -When everything started, connect

  -Once connected, stop the mac once again, nothing else is necessary.

  -restart normally.

  Lex

  PS: This clears all system caches.

• HP 110-243wb desktop PC: can I upgrade the ram and memory of my HP 110-243wb desktop PC?

  Can I upgrade the ram and memory of this HP 110-243wb desktop PC? What suggest you and you thank in advance.

  What did you find?  Was it a 8 GB module?  Two modules of 8 GB is the MAXIMUM.

  Yes, this is why I suggested the part numbers.  You have to match pairs.

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• The video file can be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again.

  It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.

  ~*~

  OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).

  ~*~

  I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;

  ~*~

  "Cannot complete the movie publish .

  The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."

  ~*~

  I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)

  ~*~

  Thank you very much

  Len

  Microsoft Windows Movie Maker is not to let me publish my movies

  Hello

  I suggest you try the steps mentioned in the link given below.

  Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.

  http://support.Microsoft.com/kb/930435

  Additional information:

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

• how re vista windows install so lost the disk and the nly have export key sticker

  Pleading for help.  I bought a computer laptop esprimo Fujitsu three years ago. It came with the disc of instalastion for windows vista home.  I lost the disk and the pc fell and blamed the hard drive and lost all software including my windows original vista, it wouldn't start. one of my friends took for a guy who fixed and installed its own software for windows 7. Then I found when using its true not his and massage keeps poping up that is not authentic. Cannot get their hands on the guy. I can not even media player inst anythalling and even download updates everytime im online cannot be installed and when I followed the link he encourages me to buy a windows 7 for R702 and I only have the money. I was happy with my windows vista. so I got the info under the laptop computer product key it is to say but sctuffy and the serial number, now how do I reinstall my vista from this fake windows 7 oh please someone help please how can I get my rear my own window.

  See the instructions for the reinstallation of Windows Vista:

  http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

• continue to be "WindowsUpdate_8024200D" "WindowsUpdate_dt000" I've updated all the disks and still a problem

  continue to be "WindowsUpdate_8024200D" "WindowsUpdate_dt000" I've updated all the disks and still have a problem. have tried all what windows help suggested and still used to install

  Hello

  Thanks for posting in the Microsoft community!

  I understand from the description of the question, that you found WindowsUpdate_8024200D. I'll be happy to help you on this question.

  Please follow the steps mentioned below and get back to us with the results.

  
  Windows Update error 8024200d
  http://Windows.Microsoft.com/en-in/Windows7/Windows-Update-error-8024200d

  After trying the steps above suggested, giving us the results. If you are unable to solve the problems of Windows Update or display us additional troubleshooting results.

• Unable to increase the CPU and memory in vRA in the Server tab billing information is not responsible to reconfigure

  Unable to increase the CPU and memory in vRA in the Server tab billing information is not responsible to reconfigure

  Please make the task below

  1. go Vcenter and check what VLAN is assigned note this number of VLANs

  2. go on the reservation tab and in the network profile enable VLAN

  3 do this data collection

  4. they that you try to configure the processor and memory, that it should work

• I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  You can do it, but you don't have to install cs3 in order to install your upgrade of cs5.5.

  You can launch the installation of cs5.5 and you will be asked your cs5.5 serial number.  Setup will ask you then select the product (in a drop-down list) calling.  Select cs3 and you will be prompted for the serial number for cs3.

  Enter the correct number at the right time and to proceed with the installation.

  If you no longer need these programs on your old laptop, disable (help > deactivate) before uninstalling so that you can keep your two activations.

• I bought 10 items on the disk and now need to install it on a new computer that lacks a dvd player. Download it from the Adobe site?

  I bought 10 items on the disk and now need to install it on a new computer that lacks a dvd player. Download it from the Adobe site?

  Download Photoshop Elements | 10, 12, 14, 11, 13

• Restrict the user admin reserveing VM the processor and memory on VM

  
  Hi team,

  Need your help. We have the cluster on which vm admin a permisstion to create the virtual machine. We limit so that they cannot create CPU & memory, booking on VMs.We have permisstion created at the level of the cluster. Please advice

  See the Documentation for virtual vSphere on Computer Configuration here: Library of vSphere 5.5 - Virtual Machine Configuration

  According to the document, the name of privilege 'virtual machine. Configuration.Change resources' allows you to change the configuration of a set of nodes of virtual machine resources in a given resource pool.

  You can edit or create a new role that disable this privilege.

  Clone the existing role assigned to the administrator of the virtual machine, and then change the cloned role.

  On the privilege, go to the virtual machine > Configuration > uncheck the resource of change

  

  Go to host & clusters, change the role of admin of vm of existing role to the new (cloned role) who does not have access to the resources for change.

  Now the vm admin not able to set up reserves, limit or actions on both the CPU and memory - but the user should always be able to change the number of vCPU or the size of the memory.