Platform issues

Similar Questions

• database cloned from 32 64-bit platform issues.

  Here's the scenario: Prod database is running on windows server 2003 32-bit, 10.2.0.5 recently patched to 10.2.0.4.
  
  Need a test copy of this running on Server 2008 R2 64-bit, so I installed 10.2.0.4 with - ignore the switch of sysprereqs running setup.exe, then patched to 10.2.0.5, which is taken in charge on 2008 R2
  
  create a database named "test", to create directory structures, file init, etc..
  
  then copy datafiles of new destinations from the last user online, startup nomount, managed backup, create controlfile with set of base data etc. then question restore database until cancel using backup control file, apply a few archives copied from prod and then cancel and open resetlogs. (my usual process clone)
  
  but this time, when you do an open resetlogs I hunted and session close by ora-1092. I try and again beginning of database and get the errors that require data recovery files, and publish all recover data file '.. ' commands and try and open again, again put on the door. Check the alerts log and he asks "open upgrade. I connect as sys, startup mount and open upgrade, database begins!
  
  So I think I have run better catproc on this database anyway, so I try to run it (as sysdba) and get:
  
  SQL > @c:\oracle\product\10.2.0\db_1\rdbms\admin\catproc.sql
  DOC>######################################################################
  DOC>######################################################################
  DOC > the following PL/SQL block will cause an error ORA-20000 and
  DOC > end the SQLPLUS session if the user is not SYS.
  DOC > disconnect and reconnect with AS SYSDBA.
  DOC>######################################################################
  DOC>######################################################################
  DOC > #.
  DECLARE
  *
  ERROR on line 1:
  ORA-06553: PLS-801: internal error [56319]
  
  Disconnected from the database Oracle 10 g Enterprise Edition Release 10.2.0.5.0 - 64
  little Production
  With OLAP, Data Mining and Real Application Testing options
  
  Then, connect as sys even once, stop the DB and try to upgrade to start, get again errors "datafile needs of recovery", recover the data files and open with upgrade, try running catproc again and the same error message saying that I need to be connected as sysdba , which I was.
  
  In any case, the database is in place and works ok at this point, so I stopped, issuing start and get kicked again when trying to open, save back with mount starup and then change the database open upgrade and it opens again.
  
  I think I'll just create a blank database at this stage and exp/imp, but I've been under heard that 32-bit backup could be restored to 64-bit platforms - unless I missed something somewhere?
  
  any ideas?
  
  Thank you!

  MOS document in question is 62290.1. See, for example, http://www.tek-tips.com/viewthread.cfm?qid=1606238

• forms, digital signatures, the platform issues

  I'm trying to implement pdf forms in an educational environment to use digital signatures and reduce paper. The data in the form has no need to go anywhere. There's just the form at this point. Some people on campus machines Windows, other Macs. All Windows machines have Acrobat Pro installed and not drive. Macs are more likely to have the drive. There has been problems with emailing these forms between the platforms. Anyone have any ideas on how to solve this problem? My IT Department will not support player on Windows machines, so the shapes must work in Acrobat and Reader! How the original document, that I put online must be registered to work in the programs and platforms? What direction should I give users on to fill out it to save the forms and sign? I have looked everywhere for this kind of info, but can't seem to find it. Any help is greatly appreciated. For the record, I'm not a computer scientist. Thank you!!!

  This is a classic symptom of save the form with preview. To check, see what he lists as the PDF producer: file > properties > PDF producer

  If it shows something like 'Mac OS X 10.6.5 Quartz PDFContent', this is your culprit. For more information, see: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

  If it's not her, I would be interested in looking at a sample.

• Installation of MS Virtual PC 2007 on my XP Professional SP3 platform issues.

  Problems with the installation of MS Virtual PC 2007 on my PC of Office XP Professional. Tried several times. Program crashes at halfway through and not complete the installation.

  Hi Nareshsubra,

  1. do you get an error message?

  We recommend that you check whether your system meets the minimum requirements of the system.
  See Virtual PC 2007

  If so, then disable all non-Microsoft programs, and then try to install Virtual PC 2007. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/310353
  b. method 2, follow steps 1 and 2, and then restart the computer.
  c. install the program.
  d. in the article, follow the steps in the "steps to configure Windows to use a Normal startup state" section, and then restart the computer.
  e. start the program and verify its operation.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Applet: how to write a file?

  This thread is a continuation of this one, but another question: Applet: cannot read the file using getResource()
  
  I'm happy, signing the Applet resolved because I couldn't get the URL resource since the * .jar file.
  Now, here's my question:
  
  If I want to write/create a file on the computer running the cmdlet, the jvm throws an exception indicating that the path is incorrect, not found.
  The server runs on Linux and the customers are mostly Windows XP/seven workstations.
  
  (1) do I take care of separators leader for cross-platform issues? On Windows, the file separator is different from Linux/Mac OS, of course.
  (2) how can I get the local directory by default on the client side?
  (3) is that a good idea to map a "ramdisk" to avoid security checks associated with access to the local file system by the Applet to write/create/modify some files? The idea is to write on this virtual disk files rather than writing them to the local file system using FileOutputStream () - I only need 1 GB at most.
  
  My first idea was to write in the * .jar file that I could take the resources OF the * .jar I expected that it was possible to put resources to the * .jar, but I was wrong.
  As the Applet is run by the customer, this feature is not always possible.
  
  Really, I don't know when an Applet is launched, at the file system level, there's an entry 'root' for any file system access (saving temporary data and so on...) and if this entry exists where it located at FMV.
  
  I had to get the resource, then change it, save it and print it. Right now, I can get it, change it, but it can't save ^^
  
  Thanks in advance for the future lights ^^
  
  PS: it works if I do not specify a path in the name of the file, but I just wanted to know if it is possible to get the local file system path, to create a special file in it.
  
  Published by: Hurukan on October 20, 2012 13:52

  (1) do I take care of separators leader for cross-platform issues? On Windows, the file separator is different from Linux/Mac OS, of course.

  I think that / works on any platform, but it is safer to use File.separator.

  (2) how can I get the local directory by default on the client side?

  New File("."). getAbsolutePath()

  (3) is that a good idea to map a "ramdisk" to avoid security checks associated with access to the local file system by the Applet to write/create/modify some files? The idea is to write on this virtual disk files rather than writing them to the local file system using FileOutputStream () - I only need 1 GB at most.

  N ° your applet is already signed, so you should be able to use the file system, that allow normal user rights (Windows). You have a few problems at the moment, but they can be solved.

• Muse-issues platform model anomaly

  I have a construction site Muse based on the model of platform (1160 pixels wide) and when I publish and display on my iMac it looks good, but when I click on the link to display on my iPad and iPhone all I get is the graphic platform model database - not the layout, I created and can see it on my iMac.

  Does anyone know why this may be?

  Thank you

  

  Hi Aldo,.

  You have created views Tablet and phone?

  This happens because you have not updated these page layout in the template.

  Kind regards

  Akshay

• Cross-platform RMAN compatibility issue...

  This question is posted in the RMAN forum listed below, but I wanted to refer here in case someone here might be able to help.
  
  a little-endian - possible Windows AIX?
  
  Restoring a database to an AIX platform Windows-based question.
  
  THX...

  As stated in the MoS post link in the RMAN forum, you can do RMAN restores between Windows and AIX because they aren't the same endian. You will need to do a logical migration using exp, goldengate, flow, etc

• The issue of deployment of secure Inizializzation platform module.

  Hello

  I have a large network with 200 laptops with the 32-bit version of Windows 7 installed.

  Now I want to deploy bitlocker with TPM, all security this laptop have the TPM but does not turn on.

  I read that I can deploy bitlocker, but how can I initialize the TPM secure on all laptop without intervention of the user physically?

  I read that it is possible in Windows Vista. What about Windows 7? All the laptops have the same brand.

  I hope someone can answer because I can't initialize the TMP module physically on all laptops.

  I'm really stuck on this.

  Thank you very much in advance!

  It is a forum for specific consumers. Try posting in the forum Pro-specifique in Win7 THERE appropriate: http://social.technet.microsoft.com/Forums/windows/en-US/home#category=w7itpro

• Known issues on the Platform 4.6.1.112 blackBerry Smartphones

  
  

  Maybe this can be the solution for someone with the same problem:
  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=55686#M55686

• Pages on issues of formatting to iCloud

  Hey everybody,

  I created a document Pages using the Pages application on my macbook pro I downloaded then to iCloud Pages so that I can access it from any computer. The issue I'm having is that I formatted some of the text to have a black background and the text to yellow color. For the life of me I can't understand how to change the background color of text on the Pages of iCloud. I beginning to think that changing the background color of text just is not possible on the platform of iCloud, but wanted to put this out there just to make sure.

  I appreciate any help or clarification on this issue.

  Thank you!

  Background (highlight) text color controls are absent in the Pages for iCloud, because it is a subset of Pages for Mac.

  This has been discussed in a previous post here, not so long ago.

• Graphics card Radeon laptop on platform Windows 8 crashes when you watch videos in Firefox. Problem does not replicate on other browsers. Is there a solution?

  I have a 4540 of Hp ProBook with a Radeon 7 x chip video integrated of series, platform Windows 8.1. When I watch videos with the browser Firefox video adapter fails and the computer sometimes freezes. If I watch videos with another browser I don't have a problem. I went to HP and have downloaded the latest drivers from AMD but still no will. So far, the only solution is to not use Firefox when watching video clips. In short, I don't know what direction to go, and since the problem seems to be specific with Firefox, I thought I would draw your attention to the problem.

  Some additional info... If I bypass the Radeon chip, i.e. use the alternate Intel video chip, I don't have a problem. It said the native PC with Windows 7 pro with the upgrade software and the key of Windows 8. In any case when 7 was installed there where no problems with the playback of videos in Firefox. Installing Windows 8 was installed a clean place, not an upgrade...

  Thank you

  I forgot a second hardware acceleration setting, which is changed in Flash itself. See this article from Adobe technical support: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

• How can I disable the affiliation platform 'Improve text' which is present on all my web surfing

  When I use the Firefox browser to surf the web, on nearly every web page I visit an invasive advertising platform creates the anchor links on web pages (keywords anchor with two hyperlinks under the anchor Word) which, when clicked takes the Viewer to an advertisement. Most of the links seems to be part of an advertising belonged to 'Enhance text' platform, I contacted to complain. They played kind of stupid. I said I thought it was the result of some malicious software where they were the sole beneficiary and they assured me that they instigate it. I went on the Warrior Forum, and some members suggested it sounded like he just one of your extensions or plugins. My security and rubbed my computer technology consultant and they removed some of your extensions and plugins and the problem disappeared. But two weeks later, he is back and she is omnipresent. Even words in my online bank accounts show these text links.

  Apart from security issues, my biggest fear is that they fly the traffic on the Web sites I publish - Web sites where I'm selling either my own or affiliate products. And that bothers me a lot.

  I don't know that I'm not the only user of the web that encounter this issue. If other web publishers also get their traffic flown and directed to a competitor's site, you can bet that there will be a class action lawsuit on the horizon for Mozilla. So I suggest go you to the bottom of this situation and remedy, because legal action will be the inevitable result.

  I don't want to alarm you because I use Firefox as my main browser. However, I checked IE, and Chrome and Chrome presents the same situation. So I don't really know how this happens, and this is why I am contacting you in this regard.

  Please let me know if you know how to disable this invasive pest.

  Kind regards
  Tom O'boyle
  [email protected]

  I eliminated it by removing the toolbar StartNow via:
  Tools > Modules > Extensions

  Edit: See also these great answers by EmailyDesarno

  Message from EmailyDesarno on page 2:
  
  I searched on Google and forums and they all say to go here to remove the text improve.

  Most also say "opting" out only will bring you more spam, so I wouldn't do that if the experts say not to do.

  so... go to this site, it has the most information on this and I found useful, I have no connection to them, it's just to help. http://botcrawl.com/how-to-remove-text-enhance/

  Message from EmailyDesarno on page 3
  
  DO NOT CHOOSE

  Which will cause more spam, it is not a solution.

  I already said, all solutions, you need to delete text improve are here:

  http://botcrawl.com/how-to-remove-text-enhance/

• Warranty issues-say no to Apple

  Hello

  I have buyed Mac book pro about 8 months and is still under warranty. One day Mac book has been ask for password and I had no idea what to do. Although pass the incorrect entry code the mac book is disabled.

  I took it to the after-sales service b2xx Pacific Mall Ghazibad, India, with the original invoice and macbook in which after the diagnosis, the Center said that they can not fix the issue offer any resolution and mac book, I bought is a piece of bin now and Apple offers no replacements, also in case of warranty. The same information is documented by the service center in their report of delivery.

  I contacted Apple in India contact center where support promises were made by Mr. Shrikant but right now no solution from Apple.

  If representative of apple is around please update with the resolution or legal platform is the only platform for Apple products.

  Rgds,

  Valentin Vikrant

  "Tell Apple".

  It is a forum to a user, is not endowed by Apple employees.  You have an administrative problem which cannot be solved by Apple where you are.

  Ciao.

• Boot camp unrecognized cross-platform records

  So here's a little history, I had an installation work of Yosemite and Win 7 ultimate running on my MacPro 3.1 beginning 2008, saw disks cross-platform with the standard read write limits, data was all mixed-platform so I decided to backup my stuff at the same time, wipe and do a clean install, I only have a disc of snow leopard OSX so I wiped and did a clean install with one of there , I noticed there was a worm even newer to avalible OSX install El Capitan then I updated level and attempted to do a training camp, although bootcamp and apples website says that my machine would support 7 when you enter the disk, he said I could do only a win 8 64-bit installation, I did not no more nor want to. It's jogging my memory that I had to modify the plist for the first time I did this, so I started to do some reading and what appeared to be the fastest workaround has been download a copy of bootcamp 4, because the new version does not support mixed installation of the iso (32 & 64 bit ver on one disc) did the installation went well spent ran boot camp software Player was not grateful so I tried to connect to the internet and there was a problem any appeared adapters but I just couldn't join the network and other issues at random so I started back in OSX deleted the partition and booted, this time networking the problem has been resolved but hard disk recognition was still a question , from windows I can openboot camp software and select this option to start card, but can not see the player mac, Mac I see windows on the desktop player but does not not in the utility disc or bootcamp and a target boot disk.

  Sorry for the long background but I seem not to be the only person having this problem perhaps this may help understand why its happening and lead to a better solution, aka prevent it

  Here is the info that you seem to need to read the other discussions on this topic

  I read the solution for the subjects to which I'm fairly certain that I'm having the same problem with and I am confident in preforming the required steps, like to confirm that, that is the question and what numbers should I use in my case for steps 7 and 8 and help is greatly appreciated.

  Thank you!

  Please after the release of

  sudo fdisk/dev/disk0

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

• Pavilion dv7-6135dx screens on the video driver blue igdpmd64.sys after the platform update KB2670838

  Windows Update has delivered platform update KB2670838 Feb. 27.

  After that, any time I open Internet Explorer, I get a blue screen of death which calls igdpmd64.sys, which is part of the video driver.

  I tried to install the latest video driver HP site was for this machine, even though it is dated as a couple of years.  But he says that I don't have the minimum requirements.   !!??

  I tried a restore point before and everything was fine.

  I let go of the front through the platform Windows Update again and the same problem.

  Now today I have no restore point so I can't go back.

  Because now I am simply not using IE, everything else works fine so far.

  Here are my questions...

  1. is this a known problem of someone else?  Is there an article on the best solution anywhere yet?

  2. suggested approaches to solve this?

  3. How can I get the alternative video drivers to try?

  3A. HP Site latest since this laptop says that it does not meet the min requirements!

  3B. should I even try the following more old?

  3 c. pros and cons of try the drivers of Intel or ATI sites instead of on HP site

  4. If after testing things, if I wanted to reinstall my current driver, how 'save', or protect some how now?  (I think THAT it is the original of the 2011 original installation schedule)

  5. How can I do to reinstall the video driver as 'supplied with the machine', for example since the recovery D: partition?

  6. If I end up having to reinstall Windows, how to do that since the recovery partition?

  Hey cfravel,

  All major issues! Sorry to hear that you use in the blue screens, but you did a good job of troubleshooting. I'll answer the questions in the order that you asked them.

  1 and 2.  Here is a link to the Microsoft Forumwhere there was a similar question. It looks like uninstalling and hiding the implementation update will correct the problem. To uninstall an update,

  • Click Start
  • Program 'type '.
  • Click on programs and features
  • Click View Installed Updates (left)
  • Search for KB2670838.
  • Select this option and click on uninstall.

  To hide the update,

  • Click Start
  • Type "update".
  • Click on Windows Update
  • Click Find updates
  • Click "# important updates available"
  • Search for KB2670838
  • Right-click on it and click on hide (you can always restore hidden updates in the future if you want by clicking on "restore hidden updates" from the main screen of Windows Update.

  3. here is the correct driver for your laptop HP Special Page. I think you're probably already doing it correctly, but just in case. How many times have you tried this driver? Try a couple of times.

  3B. Yes you could certainly try the next previous driver.

  3 c. the drivers coming from Intel or ATI are almost the same driver in most cases. We invite you to try them because they can always be uninstalled. Just, they are not guaranteed to work properly for your specific model.

  4. There are two versions of the driver for your ATI video chip. These and all future versions will still be available on your driver page. Click on the link under the latest driver that says "available versions" for a complete list of all the versions that are never released.

  5. to reinstall the driver of origin or any other original software that is preinstalled on your laptop, you can use HP Recovery Manager.

  • Click Start
  • Type "HP recovery".
  • Click HP Recovery Manager
  • Click re - install the drivers and software.
  • Scroll through the list and select drivers or software to install. These drivers will still be available on your page of driver as well.

  6 here is a link on how to reinstall Windows from the recovery partition. In the links in blue at the top, click on "Recovering from the start (in the system startup) screen". This is a very simple process.

  Please let me know if you have any questions or if these suggestions helped (it could help others with similar issues). I'll keep an eye out for your answer!