Player C change frequently

Similar Questions

• Map effective, where the keys never change, but the values change frequently

  Hello

  I need to spend many independent data (DBL, pressure readings) autour points, and they must be accessible by name (channels) from different parts of my program. Rather than having a huge cluster of many elements, I thought using a card.

  My requirements are:

  • The keys are unchanged for the life of the program
  • Values change frequently and at the same time (currently 10 Hz, but it could grow to 100 Hz)
  • All the data is quite low)<100>

  What is the best way to store my data? https://decibel.NI.com/content/groups/large-LabVIEW-application-development/blog/2012/09/04/using-VA... Describes a table of effective correspondence. It seems optimized for fast retrieval of data; I don't know if this is it suitable for the storage of data fast and frequent.

  The 'best' way would be different if I had a large set of data (> 10 000 items)?

  Thank you!

  Less than 100 items with keys of the strings, use the variant attributes and call it a day. For the largest data sets, I'll use a hash of the bucket scheme. The first step maps the keys to one of a fixed number of buckets. Each segment is a Variant, and attributes are used to resolve collisions. I put in other systems that are faster, but there is a cost of complexity of code highly it is really only worth paying if you are curious or that you have a very demanding application. Variants are almost plug and play.

  Your other option would be a memory in the database like SQLite. Good API and enough speed for all but the most demanding applications.

• SMV UUID &amp; Instance UUID change frequently

  Hi all

  May I ask why the VMs UUID & Instance UUID change frequently? How VMware is to determine the uniqueness of a virtual computer? How to prevent the UUID UUID changes & instance?

  vCenter version: 5.5

  Kind regards
  J Louis had N

  Hello Louis,.

  For more detailed infou on VM UUID, take a look at these discussions:

  https://communities.VMware.com/message/2408233#2408233

  https://communities.VMware.com/message/2410558#2410558

  It could be that useful...

• Qosmio G30-175: how to install Qosimo Player after changing RAID

  I noticed on my G30-175 x 2 80 GB hard drive, I had the opportunity to do RAID1 but don't want that.
  I want RAID0, I understand that I have to rebuild, said drivers on the disk that is ready to go, but I noticed that the player seems to use a small partition on the hard disk 1.
  After I changed the raid settings in the Bios I assume that that info will be lost so now, during reconstruction, which will be reinstalled from the cd rocevery aswell?

  Help me please

  Hello

  You re right. Changing the settings in the BIOS RAID leads to loss of data on the hard drives.
  = RAID0 mirroring. This means that all data are saved on the first HARD disk will also be stored on the HARD drive second.

  So I guess that the Qosmio Player will be installed on the first HARD drive on a small partition.
  Do you have the Qosmio Player recovery CD?
  If Yes, then you should be able to reinstall this application.

  Note: To my knowledge the recovery CD contains only the operating system, drivers and utilities but not a Qosmio Player. So you must install it in addition form the Qosmio CD player!

• In windows media player, cannot change the album art view in the list of music icon.

  * - Original title - in windows media player, I can not change the album art view in the list of music icon...

  I recently deleted a lot of my music library, the Media Player (not while in the music folder in my library, but all using the MP). but now, in the classic view (and when I click on an album cover to view follow-up for an artist or album), it will only allow me see the tracks/albums with expanded tile or Details views we don't let me use the display of the icon; Indeed, this listening option is grayed out. I don't know what I did, but before that I deleted the music I could see the icon display in the library. Can I fix somehow?

  Here's how I put it in an e-mail to a friend, maybe the problem is clearer in this way:

  Very well - so the other night, I did a purge in my music folder, deleting a lot of tracks how much I did not listen. I was doing this WMP. Now, the default view in my WMP since always the view icon, with the great icons of the album covers next to the track. (large, compared to other views) But now, I can't get that discover more, not when I'm looking for the titles of music st - only when I look by Album, artist, Genre or year. In the opinion of music suddenly the only options I been authorized were expanded tile and details - icon option is grayed out and the purge he was not! I looked in the WMP folder in Program Files and there was a folder called icons; It was empty. I had never watched there before; so I don't know if this is normal or not. How can I fix it? I remove and reinstall WMP?

  Had the same problem and you probably already figured out the answer, but it's here... Media Player 12.

  HERE a THE FIX... go to the top near the top of the media player window and directly to the left of the search bar in the media player is a drop down for the choice of the view menu. It is somehow changed to "Détails" view in the mine... CHANGE "Expanded Tile" view and your icon appears again in the Middle as I had initially.  ;)

• Windows Media Player 12 changes to the titles of the songs

  In Windows Media Player 12 on Win 8 and Kantaris media player v0.7.7, when I chose to play a bunch of songs (labeled for example Petula Clark - Downtown), they have all both the list the songs with their real names. Just after that, they change the titles of the songs to follow for example 01.mp3, which is the name you see when you right click on a song, choose Properties, then chick on details. Is it possible to stop after the original song titles, so that I can see the titles of the songs I play the songs?

  Hi Alfonso,.

  Thanks for joining us again.

  You can follow these steps to run Windows media player convenience store settings and check.

  a. press the Windows key + W and type Troubleshooting.

  b. Select Troubleshooting.

  c. Select show all in the upper left corner.

  d. run Windows Media Player Settings troubleshooter.

  Let us know the status of the issue.

• Why 20 adobe flash player automatically changes security settings

  When I choose the preference/security settings in Adobe Flash Player for Safari, it is always the same, less secure, but different parameters. Why and is at - it something I can do?

  Have you obtained later from adobe directly?

• Computer sees no floppy and CD Rom/DVD player after change of motherboard of PC w / Windows XP SP3

  After changing the motherboard on my PC, a Dell Optiplex gx270s Windows XP SP3, the computer (which also works fine) does not see the CD/DVD or floppy drives CD, DVD or floppy is inserted. (He sees not thumb drives). When I look under the hardware in the system, the floppy drive and the Cd-Rom are marked as +. All appropriate updates had been installed. These discs worked fine before the motherboard was changed. (It was done because the capacitors were bulging.)

  What could be the problem and how to fix it?

  Please explain simply, that I'm not a computer expert.

  Thank you in advance.

  Hi 4Sunnydays,

  Welcome to the Microsoft community. According to the description of the problem, CD/DVD and floppy drive is missing.

  ·         You get the error message?

  I suggest you to follow the steps in the article and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Why change the size of the video player when resizing the window a bit?

  When I use the video player to view mp4 files, the 'player' window changes the size if I change the firefox window. Why and how should I do to get the correct size in direct (640 x 480)

  Hello
  I have change the width of the content in the same size as the player page for example 480.
  Now it's working.
  Thank you

• Change the names of folders and files to destination when synchronizing MP3 player to the computer with Windows Media Player

  I'm syncing my MP3 player with my computer (copy MP3s from it in my music folder), but I cannont find a way to synchronize as I want.  It's copy MP3 files in the folder and they are stored in subfolders in Album titles.  It is also copied to as just the title of the song under the file name instead of "Artist - title" because they were copied as original.  How can I change the way in which they are copied?

  Please go to Options of WMP - devices, double-click the MP3 player and change the creation on device settings folder hierarchy. Who help me?

• I tried to update flash player but it wont let me enter my password, I changed the password and it always leaves me

  I tried again and again to update to flash player, I changed the password I can log into account, but not to update flash player

  Hi all

  Please see what userid & password I need to install Flash Player?  It's the OS that requires the password, no Flash Player.

  --

  Maria

• Bad language in Windows Media Player

  I've been ripping both CD to windows media player library, but the titles of the CD displayed in Chinese characters when they should be in English.  Some time ago I ripped the CD but I have not had this problem before. How can I display in English?

  Hello
   
  1. did you normally before cd Ripper?
  2. what version of Windows is installed on the computer?
  3. you remember to make changes to the computer before the question?

  See the methods mentioned below and check if that helps.

  Method 1:
  I suggest you run the troubleshooting Windows Media Player Settings Troubleshooter and check.
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:
  I also suggest you go through the steps mentioned in the link and the Coachman.
  Windows Media Player language settings: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-language-settings-frequently-asked-questions

   
  Change settings for ripping
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music
   
  Method 3:

  If the problem occurred recently, try to restore the computer to an earlier point before this question and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following articles:

  Restore system files and settings

  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

   
  See also:
  Add or edit media information in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-media-information-in-Windows-Media-Player

  Modify the system locale

  http://Windows.Microsoft.com/en-us/Windows7/change-the-system-locale
   
  Hope this helps and provide us more information if you need more assistance.

• VMWare Player startup with the command line command does not work!

  Hello everyone,

  I'm new to the community and it will probably show. So, I say sorry in advance for the flaws, I'll do. Since I am of German native language I need to translate it into English. So, I could use special terms wrong, but I'll certainly try to avoid this. Just keep in mind. And now my question:

  I was running VMware Player 3.0 with VMware Tools installed and VMware VIX 1.8.0 installed on a host of Win7 Ultimate 64-bit. The Useraccount on the host has administrator rights. Guest operating system is WinXP SP3. Since I need two softwares of different recording/Dictation on my workstation and I could only one of them simultaneously open (which is very uncomfortable, when you need to change frequently), because those two were always challenging who got to use the microphone, I installed a second microphone (that only the application for the two contest) and then created a virtual machine to run the software second with one of the two microphones connected only to the prompt. (Directly/comfortably) to start the second software I created a. LNK shortcut file (and attached to the startmenu) who run the command

  Departure of player "C:\Program Files (x 86) \VMware\VMware" t "C:\Users\USERPROFILE\Eigene virtual Computer\Recorder Windows XP Pro Windows XP Pro SP3.vmx VM SP3\Recorder VM.

  with the recorder VM "VM Windows XP Pro SP3" opening the second software automatically (autostart).

  This worked well, until I updated my VMware Player to 3.0.1. Since the update however, my shortcut file simply is unable to start the virtual machine. However, starting the virtual machine of VMWare Player normal window still works. By running the command mentioned above constitute the command line prompt, I got the information, this vmrun.exe could not connect to the host, due to an error, the specified version is not found, which probably means that the VMware Player.

  P:\ & gt; "" Player t C:\Program Files (x 86) \VMware\VMware VIX\vmrun.exe "start"C:\Use ".

  virtual rs\USERPROFILE\Eigene Computer\Recorder VM Windows XP Pro SP3\Record

  ER VM Windows XP Pro SP3.vmx"

  Unable to connect to the host.

  Error: The specified version is not found

  P:\ & gt;

  I tried the VMware VIX update (from 1.8.0 to 1.8.1) without success. The errormessage even remains.

  The three relevant paths for VMware Player, VMware Vix and the VM are spezified in the systemvariable path as follows:

  % SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\; "" C:\Program Files (x 86) \VMware\VMware VIX ". "" C:\Program Files (x 86) \VMware\VMware Player. " "' Virtual C:\Users\USERPROFILE\Eigene computer; C:\Program Files (x 86) \QuickTime\QTSystem\

  Today suddenly wrong?

  Any help would be greatly appreciated.

  Thanks in advance to one that solves the Enigma.

  Hello

  Meine VMs starte ICH mit dem VMplayer so:

  vmplayer.exe _

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Video player for amazon is different since firefox update

  After the upgrade to 37.0.1 Firefox, the video player for amazon has changed (she even worked as before on IE)
  connection speed and the video quality is significantly degraded the physical characteristics of the player has changed (pop no longer available through window) was limited to watch in the browser or full screen (without between - pop out)
  All the modules and plugins to update reset browser several times - same problem

  I have an image of how he used to study and the way it looks today but will have download problems (15 min worn out trying to download 200 KB gif before stopping) screenshot

  We will check this first;

  If you have any problems with the current versions of Shockwave Flash plugin then check this:

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• Videos YouTube block when quality change.

  I use Firefox for my browser. On Firefox, I used to Watch youtube videos, and I would like to have the quality video streaming, which Firefox usually allows me to have. But recently, every time I load a YouTube video and try to change the quality, no matter where I am in the video or how do I change the quality (by changing higher or lower quality has the same effect on the video), the video will go black, the sound stops and it is clear that the video is no longer running. I don't remember when it started, but it was not for maybe long, 1-3 months. If I do the YouTube Player widescreen and reload the page, the video will default to 480 p, but I still can not change in this position either. I tried to do this in Chrome and I can change the quality, but I can't be bothered using another browser just to play videos, and frankly, Chrome sucks. I don't know what caused it. I think this is related to the new layout of the YouTube video player.

  The behavior of the current YouTube media player seems different to me when changing the resolution.
  I now see an icon of rotation for a short period until the player has changed the resolution and has made sufficient buffer to switch to the new resolution.
  The change is barely noticeable for me.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting
  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin

  You can try the basic steps like these:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes