Similar Questions

• Please help me solve this message: Userinit logon application stopped working. I have windows 7. Thank you.

  Please help me solve this message: Userinit logon application stopped working. I have windows 7. Thank you.

  Hello

  -When exactly you receive this error message?
  -Did you do changes on the computer before this problem?
  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 7 in binding boot is a way of putting your computer to normal startup mode.
   
  Hope this information helps.

• Please help me to download the 13 elements, I all relevant issues and have tried several times but without success.

  PLEASE HELP ME TO DOWNLOAD ITEMS 13, I ALL RELEVANT ISSUES AND HAVE TRIED SEVERAL TIMES.

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• Hello. Can you help me get my built in webcam doesn't work on my Advent laptop with windows Vista operating system thanks

  Hello. I have a very nice laptop Advent and would love to get the built in Webcam work. Can you help me please? I have the windows Vista operating system. Thank you jeremy in Great Britain

  PS my grade o level B in computer science from Cambridge arriving 1984 useful! Thank you

  Hi Jeremy,.

  1. what happens when you try to access the webcam?

  2. have you updated the software and drivers for the webcam?

  You can check if the webcam is detected in Device Manager and also try to update the drivers.

  a.Click Start and type device manager in start search and press ENTER.

  b. in Device Manager check if the Webcam is listed.

  c. right click on the webcam and try to update the drivers.

  For more information, you can consult the following article:

  Updated a hardware driver that is not working properly

  You can also see the laptop manual to check if the computer manufacturer has provided a software for visualization of the webcam on your computer. You can also ask advent and are looking for the same thing.

  Support of advent

  Hope this information is useful.

• Can someone help me to choose good memory for my computer so I can upgrade from Windows Vista Basic?

  Windows Vista Home basic up grad

  I look to all the graduates of place for my windows vista home basic I need memory and there are many large chip that needsCan a computer help

  Hey O Dwayne,

  I suggest you to return the items.

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/compare?T1=Tab03

  http://Windows.Microsoft.com/en-us/Windows-Vista/this-old-PC-Windows-Vista-is-here-is-it-time-to-upgrade-your-hardware

  http://Windows.Microsoft.com/en-us/Windows-Vista/upgrade-to-another-edition-of-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Anytime-Upgrade-frequently-asked-questions

• Why the help and support of software still pop - up when I click on the buttons in Windows Vista SP1?

  I have this laptop to my cousin, because he does not use it more because of some problems. I tried several methods, but I still have this problem. When I open any software, automatically help and support appears.

  I hope you can help tnx I...

  Hi Jalke116,

  You can try these steps and see if it helps.

  Step 1:

  You can try to perform a clean boot and check if the problem persists.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After you resolve the problem, see the section on boot link to how to restore your computer to a Normal startup mode.

  Step 2:

  You can also read the following article and try to download the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Please help, convert this string to a number format

  I send orders via RS232 to my machine and the machine sent back with a display of the number "40" in display normal in my image attatched. I tried to use the string conversion to digital tools, but there is nothing happen just '0 '.

  I wondered with it, then I try output string in a different way as in attached code, display and hex display and see the format of it.

  I want to get the string '40' to take the number, how can I get it? Help, please

  

  Thank you in advance.

  It has worked well for me. Just to be on the safe side, you can use the Trim function spaces (channels palette) to clear the characters "\".

  

  Steve

• Please help me with the miniatures in pdf format

  Hi, I need help to see the thumbnails generated in PDF format. I have a very very large number of eBooks in the format PDF to work and study.  and all of a sudden I can't look at the generated thumbnails, only the icon of adobe, do me impossible to find a specific book.

  If I give, double-click the book opens normally and I can't reed as ever.

  Help, please! is very important for me its my way of life and work.

  Help.

  Read this:

  http://forums.Adobe.com/thread/303008?TSTART=0

• Please help me to choose the material for my new computer

  I'm creating a new editing machine I want to use after effect, photoshop, flash, illustrator and 3ds max. I do a lot of animation 2d and 3d, video editing and graphic design.

  It is the system that I'm currently planing on building:

  Processor: intel core i7 2600 k (I'll be overclocking it to about 4.8 ghz)

  Motherboard: Asrock p67 extreme6

  Memory: G.Skill ripjaws x series 16 GB ddr3 1600 case latency 7

  Graphics card: Gtx 570

  Power supply: Rosewill bronze series 1000w

  Hard drive: 4 x Corsair F120 in raid 0

  Case: Bitfenix collosus

  CPU cooler: Noctua Nh - d14

  I have a budget of $2500 for this computer. I was wondering if anyone has any suggestions on things should change / recommend a completely different version for my budget.

  Also, I was wondering if the gtx 570 is a stupid choice and I should get a quadro 2000 instead. I don't do any game.

  One last thing, do 4 ssd in raid 0 helps not at all or should I just get 8 HDD in raid 10 or I should spend less money on hard drives.

  PS I know that the i7 2600 k was recalled but I'm in no hurry to build this computer. Also, feel free to recommend the hardware that has not yet been published, but will probably be in the next 8 months.

  PSS all programs I listed are CS5.

  Join all Todd and some things that I consider:

  Two processors will pack punch rendered, especially in your 3D work.

  Even if the 16 GB of RAM is generous, I would consider more.  Remember the rule: 2 GB for each heart of the processor, as well as some more BONES and other applications.  If you are using 8 cores/threads for rendering, 24GO would be optimal.

  While hard drives give an awesome performance in this config, there are a lot of money to spend on less than a terabyte of storage.  RAID 0 is also quite volatile, so be sure to run a regular and reliable backup system.

  For my money, I'd probably use a SSD a good size for a system drive, then 3 or 4 Classics (or hybrid SSD) drives for storage of media, with a decent RAID controller. You will get 3 times the storage at half price and are still quite zippy I/O speeds.

• Unable to access computer because the account password for Windows Vista has been forgotten and don't have a password reset disk/hard to find ways to restore the system... Help please

  Hello
  I'm stuck on the screen on my computer for my Windows Vista Home Premium 64-bit edition. The password to the user account has been lost, and now I am unable to access my computer. I don't have a created password reset disk so I can't reset the password. I searched these forums and seems the most effective way is to run a system restore to a time where I did have a password for my account. Fortunately for me, I did an automatic update of Windows that created a system restore point literally moments before I put the password, so I should be able to get access to my computer once I figured out how to get system restore to work. The advice I found on other forums do not seem to work, because I'm in my Windows vista operating system disc, but no screen is coming up with 'Repair your computer', which indicate the steps happen. I need assistance to find another way to run the system restore on boot menus/Vista/DVD CD. Thank you.

  Go to Bestbuy or other PC shop. They can fix it for you. (Could I have so I am not allowed to post these alternative instructions.)

• Pavilion series 2100 p6: my computer says "operating system not found" Please help me

  I tried to reset my pc because my computer is very slow so I tried, during the reset there were times when he could not reset so I continued to do and then a message showed "an operating system not found. Try disconnecting all drives that do not contain an operating system". Please help me. I really don't much about computers. And I also had windows 10

  Juan8

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to the page of the product HP for your PC, it came not with preinstalled Win10.  THIS means that you have done the upgrade to Win10.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work.

  The problem you mentioned is usually due to one of two basic problems:
  (1) defective hard drive
  (2) damaged/missing bootloader files
  
  As to the first, please follow the instructions in this link to test your hard drive: http://support.hp.com/us-en/document/c00439024
  
  If that confirms that your drive has failed, then you will need to replace it.  Please report back if this is the case.
  
  As for the second, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  Once you have that, please download and create the Win10 installation media from this link: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT. If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Boot from the media that you have created and follow the instructions in this link: http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-windows-10-a.html
  
  You will need to go to the Advanced Options screen and click on startup repair.  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• My search function has been hijacked. Whenever I try to click on a relivant search it goes to a completely independent website. I deleted firefox and reinstalled but it did not work. This will not occur in Internet Explorer. Please help, I don't want to u

  My browser to search was hacked, how do I get rid of this. It does not work in Internet Explorer. Please help cause I don't want to use IE I don't have to.

  I have tried different anti virus programs but its still here.
  

  Michael

  Install, update and run these programs in this order. They are listed in order of efficiency.
  (Not all programs to detect malware, you may need to run them all to solve your problem.)
  These programs are provided free for personal use, but some have limited functionality in "free" mode - but these are the features that you really need not to find and eliminate the problem you have.
  
  Note: If your malware infection is bad enough and you're poorly led to URLS other than what is displayed, you may need to use another PC to download these programs and use a USB stick for transfer to the afflicted PC.

  Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
  
  SuperAntispyware - http://www.superantispyware.com/
  
  AdAware - http://www.lavasoftusa.com/software/adaware/
  
  Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
  
  Windows Defender: Home Page - http://www.microsoft.com/windows/prod.../default.mspx
  
  In addition, if you have a re-direct search engine problem, see this:
  
  http://deletemalware.blogspot.com/2010/02/remove-Google-redirect-virus.html

  If they can't find it or cannot delete it, post in one of these forums using specialized malware removal:
  
  http://www.spywarewarrior.com/index.php
  
  http://Forum.aumha.org/
  
  http://www.spywareinfoforum.com/
  
  http://bleepingcomputer.com

• Hi, I downloaded Adblock yesterday, since then my Safari is running as Aol dial up to 20 years. Do uotknow how to uninstall Adblock.Don't you think that this is the cause? MacBook Pro 2014 please help me! Thank you.

  Hi, I downloaded Adblock yesterday, since then my Safari is running as Aol dial up to 20 years. I don't know how to uninstall Adblock.Don't you think that this is the cause? MacBook Pro 2014 OS X El Capitan Version 10.11.3 retina 13 inches processor: 2.6 GHz Intel Core i5, 34,88 GB 120,11 GB free memory I must sound stupid that I don't know how to uninstall it, but I can't even find Adblock anywhere on my computer. Please help me! My nephew who is my personal COMPUTING guru is in Russia on vacation. Thank you very much.

  greekmama1

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.

• HP 15 ac189tu not find the bluetooth device please help me

  HP 15 ac189tu not find the bluetooth device please help me

  PLEASE HELP ME

  Mr President

  I found the solution

  I have install MS 72552.exe

  & his departure find device

  Thanks for supporting.

• Please help me with this < I have a virus, a bug, malware or something...

  There is something called Firewall Builder windows (activate ultimate protection then asks a credit card on an anonymous line) that keeps popping up and saying I have all sorts of things wrong... but I can't find a way to remove it, it blocks my anti virus and the scanner tools Microsoft apparently can't find it I need help with this... He also does something to my to my system restore, I can't go back today... This bug also always flashes something on torrent link detected everytime I try to download something from Microsoft... it's very frustrating please help.

  sincerely of Tanya Willis

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Firewall-constructor