Plotter of selfs of large print files

Similar Questions

• Transparency flattening / rasterization of large print files

  Hello world

  I was wondering if anyone out there with experience dealing with large prints (72 in. x 36 in. @350 dpi) has any advice in the following situations:

  I was hired to make a print in large print for a gallery (12 ft by 3 ft). They want me to use a favorite printer that requires a resolution of the final output of 300-350dpi. My source file is an Illustrator file (CS5.1) containing of MANY overlapping polygons, transparencies (100)). The printer had me said first that there was a weather provide the Illustrator file as two parts, 6 ' x 3 ' with as well as vectors. They just go for me and rejected my files, request now full resolution TIFF. I tried flattening transparency and the output to TIFF, but either Illustrator crashes indefinitely to halfway in the process or errors, telling me that the combination of the size and the resolution is impossible to exit. I even tried to import into photoshop as a smart object, etc. It seems I am running out of memory/cpu power/Illustrator skills even if I tried this on a mac pro with 12 GB quad cpu memory. For the moment, I'm screwed. I have no idea how rasterize my art in vector at an acceptable resolution anywhere near. The image is very dense and full of subtle changes in color and density due to transparency. I need to preserve as much as possible. I'd be happy for any guidance in this area. Thank you!

  Save the file as an .ai with PDF compatibility on. Then open in Photoshop and pixelation.

• DesignJet 5500: hurt large print PDF file

  I try to print a large PDF file to my 5500 and I'm getting "out of memory" and the error messages "lost data".  I tried to use the cable parallel and through the network interface.  I don't know how to check, but I guess that the printer has the amount of memory that was the standard when the printer was new.  Problems of memory seem to be linked to the memory of the printer, because the computer has a lot of memory.

  I have a RIP Fiery X 2 - CP, but I've never used. Do I have to use some sort of RIP to the buffer or coil (whatever it's called) between the computer and the printer memory?

  I tried to print a picture 63 "long that is 30" wide, the printer will print the entire length but only approximately 12 "wide.

  Let me know if you have any questions.

  Hello

  You can find the firmware on the following link

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=82225 & swItemId = pl_59704_5 & swEnvOid = 228

  The 5500 doesn't have an EEROM reset like the T795.

  If you install the driver HPGL2, go to printing preferences > Services > troubleshooting Menu > compatibility with app 19 bits, use send as Bitmap.

  Issue.

  On what application the PDF has been created?

• How to send large video files from my iPad

  How to send large video files from my iPad

  The restriction for large files to mailing in general is defined by your email provider. Most of the suppliers imposed restrictions on the size of attachments. You can contact your e-mail for more information provider, but in general, consider a large video file too large to email.

• Where can I find the print files

  Hello fellow Mac'ers

  I sent a file from a PC to my Macbook using Hello. I do not see the files in the print queue or anywhere else, but now I get pages virgins churning of my laser printer.

  I can't print from the Mac in the form of files what if producing blank pages prevents all other files sent to the printer
  If I can find where the print files are sent, I hope that, by removing the file/s, the problem can be solved.

  I restarted the printer, the Mac and the PC and also deleted Hello.

  Hoping someone can shed some light on this problem

  Open Safari and type the following URL

  631 / jobs /.

  You should see the work queued here. If that does not work either and you don't have that one printer the fastest way is to reset the printing system

• External hard drive does not allow me to backup large video files

  Hi - I wonder if anyone can tell me why the Toshiba 1 TB 3.5 "external hard drive I recently bought does not allow me to backup large video files from my PC.
  The files are located in the region of 5 to 10 GB and when I try to save these I get the message that they are too big for the destination.

  Any help would be appreciated. Thank you.

  Do you want to just copy/move these files from your PC to the external HARD drive?

• Split a large data file

  Hello:

  I have a large .dat file that contains multiple groups of data. I tried the Import Wizard, but it is only able to analyze all the data channels (columns). How to create a data plugin that is capable of breaking a large file into several groups of data?

  Example Structure:

  Comments and header information

  Group info

  Group info

  Group info

  Channels

  Data...

  Group info

  Group info

  Group info

  Channels

  Data...

  and it repeats.

  My goal to have in separate groups is to import each group of data in the form of sheets in an excel file.

  Hello stfung,

  Please find attached a draft for the use. Download the file "URI" on your computer and then double click on it. This will install a use called "ModTest-text file.

  The major section of the Plugin meta-data handling. reading data from the signal into groups is the smallest part.

  If you are interested in this part of the script is in a function called "ProcessSignals(oFile,oGroup)".

  Please let me know if the plugin works for you.

  Andreas

• How to read a selected part of a large ascii file (~ 200 MB)?

  I have several large ascii files I need to read in.  These files are part of a standard test for an application that I wrote. How well my application parses files determines how the program accomplishes its main task. For a real test, the application captures live data in the form of a 2D double table and analyzes the data of this form.  This table is long of 3 million items (1 ms/s @ 3s).  I usually never treat any form of ascii file because all data is stored as TDMS using this method (though I need to update this link with a few critical changes). (Thank you again Ben)

  Ascii files I have to read all have two rows of data from the header, followed a ~ 8 million lines of data representing the data I capture in general.  Each line contains point data and a value of accumulated time.  I need to load each file separately, analyze the data within, and communicate the results.  The part that I need help for loading of the file.  So far, I was able to load a file without memory problems.  A stay is similar to a real test, I need actually only 3 million lines for analysis.  But I have to be able to select the 3 million lines by time values in the file.  Technically, I only need the single column of data and the frequency of sampling, represented by time values.

  How can I select a specific section of an ascii file and read them in LabVIEW as a double 2D array?  Which is possible for 3 million points of data without crippling the system using all the memory just to accomplish this task?  An alternative version of 'last resort' would be to run a separate program to create a file DDHN that I could then read and go from there.  But I prefer to read the file directly to my request.

  I'm running on an HP EliteBook 8540w with Win 7 Enterprise (64-bit), i7 CPU bicoeur (2.67 GHz) with 8 GB of RAM and 32-bit LV2011.

  Thank you

  Scott

  
  

• Print outs are increasingly large print shown on the screen. Help please.

  Original title: print the problem

  Print outs are increasingly large print shown on the screen. This Cup is right edge

  or way to print additional pages. Help please.

  Hello

  1. facing this problem when printing from all applications or specific application?

  2. What is the serial number and model of the printer?

  You try to print the test page and verify that you are experiencing the same issue.

  To print a test page

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_test_page.mspx?mfr=true

• All-in-one HP Deskjet 2542: 2542 all-in-one - large Print - low ink

  Hello

  So I have a large print job (25 pages all black color) and the estimator of ink indicates 1/4 of the remaining black ink and ink color 1/3 remaining.

  I want to AVOID pages that are stained, streaked or faded.

  Should I go get a black cartridge HP-61 and install it for this work (, I anticipate printer will be want to print a test page and others and confused when I put the full cartridge 1/4 in),

  or,

  should I just give it a try.

  Kind regards

  RunningWolf

  Hi @RunningWolf,

  I see that you would like to know if you have enough ink to print a 25 page work. I would like to help you today.

  I suggest to print 5 pages at a time, the application when you go to print you can select pages to print at the same time. Then make the next set of 5 and so on. In this way, you don't end up with a bad impression. You can try the full 25-page document and if the pages are faded, then you can always go back and simply print these specific pages.

  

  Hope that helps. If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• trying to send a large audio file

  How to send a large audio file by e-mail. Message says error cannot send it's big.

  What is the size of the file and who is your mail server. They all have limits, and if you talk about 10 MB +, not many people would want to receive even if you could send it. You can used a third-party Web site to do this. These are only two of many.

  Download large files. An alternative to e-mail.

  YouSendIt:
  www.YouSendIt.com

  SendThisFile:
  www.SendThisFile.com

• CRC error on large compressed files (.zip, .rar, .cab, etc...) The installation fails too...

  Hello world

  I have a new Dell computer. It's a Dell Studio 540 with Windows Vista Home Premium 64 bit, with 1 TG of hard drive and 8 GB of RAM. I have problems with "decompression" of a large number of large compressed files (more than 50 GB). Also, because the files on a DVD are often compressed (in the cab for the majority file), the same error occurred on an installation package. Thus, to resume, I got CRC error on compressed files, while opening the zipper AND my different types of software installation fails with errors of Sami.

  Before you answer, please read my steps below:

  1. I reinstalled Windows Vista 2 times from scratch with a clean format. Whenever I get the same error on the same files even when there is nothing installed (even the drivers are not installed).
  2. I tried to run Windows XP Mini, a very light version of XP is the launch of a CD at startup and run in RAM. The same problem.
  3. I did all kinds of tests of the material myself AND with Dell technical support. Nothing was found, and I'm sure it's 99.9% true. Everything has been tested: RAM, hard drive, processor, motherboard, etc. The Dell technical support told me that my computer is 100% functional and that this error is due to some software (Windows) does not very well with 64-bit processor... Everything works well in my work all day EXCEPT for the decompression of data.
  4. my files are not damaged: they unzip perfectly on other computers. In addition, the program that do not install because of the CRC error with compressed file are all used before on another computer OR are new. I even changed DVD to the store to get a new one and the problem is still there. I also tried to download the torrent from the .iso file and the same problem happened.
  5. the files on my computer are not corrupted by the hard drive. I copy keys usb, directrly on the DVD to the hard drive. All possible tests have been done on the files, and they are ok.
  6. I did all kinds of tests such as checkdisk, spyware, etc... but given that the installation has not helped with it, I don't think it's related.

  My last hope is here... MVP is maybe know a problem in which Windows with zip files. I read a lot of people of the CRC errors, so I'm sure something happens. I am currently with the Dell customer service to get a full refund to buy a new computer without a 64-bit processor because it looks too new for Microsoft.

  So if anyone knows something I could try, tweak, change to help me with my problem please let me know.

  Thank you very much!

  DarkJaff

  Hello!

  This morning, I realized that I never returned to close this topic. In fact, I work with dell for a number of weeks, talk to like 10 or 15 support technical Member, try something else and you know what works?

  Reinstall windows... But in my case, I have reinstalled windows 2 times before they ask me to do it again. So I did and everything worked perfectly... For the third time is lucky: P in fact, perhaps during the first installation of 2, RAM has not been installed properly or has failed for a second, because every file that has been read has become corrupted, but at the same time, everything is normal on my computer seems to work ok... In addition, it could be the update that I did for my BIOS. So, a good test would be to update your BIOS, shut down your computer, check if the ram is installed ok, restart, verify that your ram is detected.

  After that, reinstall your windows, but DO NOT use the file you had on your "not working version of windows. I lost a lot of backup of the thing on my computer because even put on my new fresh install of windows, these rar did not work. I needed to pick up an old DVD and they worked

  So, I hope this will help!

  DarkJaff

• What is the purpose of the 'neighbourhood' of printing file in each folder Windows Vista user?

  It does not printers or links to all printers, even if 7 printers are installed on the computer.

  Hi Casey,.

  Thanks for posting your question in the Microsoft Community Forums.

  Based on the information, you try to find the object of the 'Neighbourhood of print' file in the folder of Windows Vista users.

  'Neighbourhood' of printing stores the path to the folder containing shortcuts to printers that you have added to the computer.

  These files are called a junction. Junctions work as shortcuts, but in the case of Vista look like standard folders with an arrow. A junction is intended to reorient the programs that access to their to their equivalent of Windows Vista. Since junctions aren't really folders, it is not possible to access, and any attempt to do so will give an "Access denied" error.

  C:\Users\$user$(User Name) \AppData\Roaming\Microsoft\Windows\Printer shortcuts.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Documents scanned on more than 8600 are recorded in the form of very large pdf files

  HP Officejet pro 8600 more all-in-one.

  OS Vista Home Premium 32 bit

  . The PDF files created by scanner are 10 times larger than files created by my previous all-in-one to the same DPI setting.

  How can we reduce the size of the file.

  Open the 8600 Officejet Analyzer and select the Advanced Settings.

   

  • 
    
  • Select from the file tab, then look where it says file size / quality and move the slider to your needs.
  • 

  Then click on the OK button to go back to windows to scan and analyze your PDF files.

  * Click the stars KUDOS to say thanks

  * also click on the Solution button if your question is answered.

• Why Outlook edit text in e-mails to a VERY large print?

  In our business, we have at least five computers running Outlook Express (my soft Office 2010) with the following problem:
  Customers are often receive e-mails with text in very large print - hard to read and not a professional look for us.

  I don't know how your network is set up, and I don't use of moy. I found this through Google well.

  From: http://free.avg.com/ww-en/faq.num-3031#tba2

  The AVG E-mail Scanner can affect your sending/receiving e-mail, since it is designed to analyze the messages and needs to access somehow. The access method messages depends on your e-mail client, but that the personal email of Scanner plugin can interfere with communication between your computer and the e-mail server.
  To disable the personal E-mail Scanner (if it is installed), please:

  Please activate the servers that have been enabled originally again when possible.

  And from here: http://www.vcn.com/knowledgebase/article.php?id=436

  1. exit all programs are running email.
  2. start the AVG Control Center. To do this, click the small square red, black, yellow and green to the bottom of the clock in the taskbar, in the lower right of your screen.
  3. click on the big button Email Scanner (found on the right side of the Control Center window). Select 'Properties' from the bottom panel in the control center.
  4. a window should open with a plug-in tab at the top. Click on "disable plugin" in the Plug-ins tab.
  5. click the "Configure" button and uncheck all 5 options (scan incoming messages, scan outgoing messages, use the heuristic method, scan in archives, scan attachments).
  6. click on OK and then OK again.
  7. close the control center. Open your e-mail program, and then try again.

  ****************************************************

  If the problem persists, it may well be the sender of outgoing messages scanning, but if this happens for every sender, which is unlikely.