Plug the stereo receiver to computer

Similar Questions

• Satellite C50-B-12V: mic turns off when I plug the headphones

  Hello

  I recently bought a computer laptop Toshiba Satellite, Satellite C50-B-12V

  I'm really happy with my new lap top - thought I am facing a problem.
  It seems that the port to plug in headphones and the port to plug in a microphone is the same. so, if I plug headphones wireless for a Skype call, the other party can not hear me.

  Is there anyway that I can adjust the computer so that it shouldn't be a problem?

  Again, I would be able to plug the headset on my computer to hear my interlocutor better - and who have not cause the other party cannot hear me.

  Hello

  This integrated headphone / microphone port equipped with a plug of 4 section (identified with 3 black rings)
  You have two options to solve the problem mentioned.
  You must use a headset / microphone with jack combo or you could buy an adapter 'Y' which can connect your current helmet with separate microphone and speaker back to the headset / combo jack.

  Something like that:
  [Y audio / headphone | http://ecx.images-amazon.com/images/I/41Y59zwJxcL.jpg]

• Make a loud humming noise after I connected my stereo receiver in the headphones

  * loud snoring

  I am running windows 7.  I have my stereo receiver connected to my PC via the headphone jack.  When using my desktop, I get a noise loud huming as soon as I plug to the headphone jack.  When using my laptop this doesen't happen.

  Hello

  I suggest you to go through the following steps and check if it helps.

  a. check the connections between the components and make sure they are secure before moving on to the next step. Sometimes connections can cause a hum.

  b. the audio to separate the power cables; electromagnetic interference from the power cords can cause a hum stereo. Clamps to fix audio cables away power cables.

  c. plug a surge protector at the exit and all components and then plug the surge protector.

  d. connect a ground Plug and the surge protector and then plug the ground in the main market. A ground plug is available at any hardware store and turns a connection of three holes in one to two pins. Taken on the ground to eliminate 60 cycle hum.

  e. connect the wire of your turntable to the ground on the receiver wire connection. If this does not work, connect the ground wire to a screw on the outlet.

  A humming noise is probably material especially if the noise comes from the case. If the problem is related to the hard drive then I would recommend backing up data as quickly as possible. I suggest you to connect with the site of factory equipment and download a hard disk diagnostic test. I also recommend that clear the dust from the system with air canned that could cause problems with the fans, heat and material failure.

  How to back up files and recover data

  http://www.Microsoft.com/athome/Setup/backupdata.aspx

  http://support.Microsoft.com/kb/971759

  I hope that helps!

• PCI-6733 signal noise when the computer screen is plugged, the weight on the case

  Greetings,

  I hope that it is in the right section.

  Card: PCI-6733

  I'm a 60 Hz, 2 mV peak-to-peak with a compensated 2.4mV noise when the monitor is plugged into the VGA port.

  Same card in a second computer, problem is more serious, 4mV Ridge to Ridge, 4.3mV offset. When I push on the case near the power supply the offset rises from a few millivolts.

  The two computers are running the same exact versions of software and drivers. Dell and quite similar to each other in both material and form.

  I have a third computer that noise coming out of the map is horrible no matter what.

  I exchange business cards and the problem is with the computer, does not follow the acquisition cards.

  No idea how to solve this problem and what is the cause?

  Thanks for any thoughts!

  -Michael

  Tall_Michael,

  Looks like you may be plugging your monitor and your computer in different points of sale.  If this is the case, this is probably the cause of your noise and can be eliminated by connecting the two devices on the same socket.

  Here are some articles that deal with the noise you are experiencing and various workarounds in the cases where what I mentioned above are not the case:

  The problems of noise in the measurement configurations

  Sources of the measuring Signal ground

  How to eliminate noise on measures DC power without using a lowpass filter of material?

  I hope this helps!

  Thank you

  Trey C.

• We try to update the software on a computer and continue to receive the error 1719:

  We try to update the software on a computer and continue to receive the Error Message 1719: "Installer cannot access the Windows service". We tried to repair Windows install several times by the cancellation of registration registration without success. Windows Installer continues to block the update of the program

  We tried to install a new version of Kaspersky and have met the above problems.

  Hi Jug,

  Thanks for posting the question on the Microsoft Community Forums. I understand that while trying to update the software, you get an error 1719: "could access the Windows service install.

  This question is can be caused due to:

  You install or remove a program that uses Microsoft Installer Service to install a program on your computer. The Windows Installer Service is not running. The Windows Installer registry settings may be damaged or wrong.

  I suggest you check out the link to the troubleshooting steps.

  Error "The Windows Installer could access the Service" when you install or update programs on Windows 7 or Windows Vista.

  http://support.Microsoft.com/kb/2642495

  WARNING:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

  How to back up and restore the registry in Windows.

  If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• When I plug the USB FLASH drive into the PC it does not appear in the computer

  I have a USB Flash driver: Team Fusion more 4 GB

  Like this one:
  
  Same color and this one exactly.
  and when I put inside my computer I hear the BLOOP sound when I insert it and also when I go out, I hear a noise... but when I go to my computer it does not appear...
  It worked before, I inserted my USB Flash driver inside my computer... then when I right click on a file inside driver flash my computer got stuck and I force restarted my PC with exit it restarts normally and after that it doesn't work any more I just hear sounds when I insert the USB key inside and outside.
  I tried things.
  -Troubleshooting and it didn't help me at all... He didn't show me something when he finished it.
  -Tried restarting the computer and access bios and active in the advanced settings in the number 3 to USB - ZIP
  -J' inserted behind my computer and also in front of the computer USB flash driver.
  -Computer all analysed in depth scan with Advanced System Care Pro 5.4 and did not help even after a reboot.
  -Tried to reinstall the driver for the "Device Manager" USB flash drive
  -IMPORTANT! I tried to plug this USB on another computer and it arises there, but could not access the USB key, I tried to format and it says error and he said that he could not format... I tried to format it in NTFS, fat32, with formats fast and quick, but nothing has worked.
  SO the problem is with the USB FLASH DRIVE! not the computer...
  Help me please :| What should I do?
  Image when my USB driver is inside my computer:
  Open the image in a new tab to see full size image.
  Picture that shows that I reinstalled the driver for my USB Flash drive:
  

  Yes man, he is in disk management. I tried to do a right click on it and clicked on «letter of change of driver and paths...» "and it came up with error... Look man, I fixed that by myself... the flash disk is cool now xD you know what I did? I just went to my dad's pc... I tried to get the DRIVER USB FLASH, but he came up with the error and asked if I want to format it... I clicked format and it didn't work... I tried NTFS, FAT32, format not quick and fast and nothing worked... it was still * place... so what I did? I downloaded "HP USB Disk Storage Format Tool 2.2.3" of http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml here and then I formatted it with success! and then the flash driver disk worked on my dad's computer but when I tried to connect it to my pc, it does not appear lol but it worked on other computers, so it's cool: P I just going to format my PC: P it works now with the USB HP program disk formatting tool. only does not not on my pc, but it's ok... I formate my pc. :)

• My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

  My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

  Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

  Hi,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• "Core security check failed" and the computer hang when I plug the USB mouse

  Hello

  Whenever I plug my mouse into the USB port, my computer crashes and gives me the error "Kernel Security Check Failure". I tried to uninstall the mouse driver, but it does not work. The mouse works fine after restarting the computer. Thank you for your help.

  Here is the link to the single minidump file, I managed to download (with other permissions issues):
  https://SkyDrive.live.com/redir?RESID=AB9340451E9919AC%21161

  Let me know if there is anything you need. Thank you.

  Hello

  The attached file of the DMP is the verification of bug KERNEL_SECURITY_CHECK_FAILURE (139) .

  This bug check indicates that the kernel has detected a critical data structure corruption.

  Error checking 139, {3, ffffd00022411350, ffffd000224112a8, 0}

  Parameter 1 error checking is 3, indicating that a LIST_ENTRY has been tampered. Code 3, LIST_ENTRY corruption. This type of bug control can be hard to track down and indicates an inconsistency introduced in a list to double bond (detected when an input list element is added or removed from the list).

  Cannot load the image NMgamingms.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for NMgamingms.sys
  ERROR: Module load completed but symbols can be loaded for NMgamingms.sys
  Probably caused by: NMgamingms.sys ( NMgamingms + 1cbb )

  ^^ Primax and/or optical mouse USB Dell driver (CHECK OEM - system manufacturer). This is a highly problematic device driver in Windows or 8.1 simply due to the fact that it's drivers did not support for 8/8.1, so block you on connect. The only thing you can do is to check the website of the manufacturer of the mouse and check for a driver 8/8.1.

  Kind regards

  Patrick

• How can I download pictures from my Sanyo 3810 phone on my computer? I have a USB cord to plug into the front of my computer?

  I have a Sanyo 3810 phone that I got from Sprint.  My contract expired and I went with cellular consumption.  I don't have a place for a SIM card in this phone Sanyo.  There are pictures on this phone I want to download on my computer.  Some of them cannot be replaced because they are my granddaughter who died this summer, at the age of 2 years.  I desperately need to find a way to get these photos developed.  Please, please help me with this dilemma.  I would be grateful what you can do.  I bought a USB cord to connect on the phone and my computer.  Thank you for your help.  Glenda Gamez

  Hi Glenda,

  Welcome to the Microsoft community!

  According to the description provided, looks like you want to know how to copy pictures from the sanyo phone into the computer.

  However, we need more information about the issue to help you better.

  Please help me answer this question.

  What version of Windows are you using?

  Visit this link for the operating system you are using.

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  Here is a link that provides a soultion. Try the methods mentioned in this link and check.

  http://community.Sprint.com/Baw/thread/41336

  Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.

  Keep us updated on the status of the issue. Using the windows-related issues feel free to post on Microsoft Community.

• I get phone calls from a person claiming to be windows saying they are receiving my computer error messages and offering to show me what is the problem on my computer is this true

  I get phone calls from people saying they have reports that far, something is wrong with my computer and asks me to do the thing on my computer in order to allow them to show me wat is wrong?  Would Microsoft or Windows contact me by phone with succh a request?

  Tuesday, September 25, 2012 11:44:28 + 0000, Bob PaynePayne says:

  I get phone calls from people saying they have reports that far, something is wrong with my computer and asks me to do the thing on my computer in order to allow them to show me wat is wrong?  Would Microsoft or Windows contact me by phone with succh a request?

  No! Microsoft never this.  It's a scam and with various
  the names and phone numbers, those who become very common these days.

  In addition to their money get on your part to do anything of any value,
  If you leave them in your computer, which knows what losses they did are
  where confidential information they stole.

  So if you have done so, I highly recommend that you do both of the following
  immediately:

  1 do a clean reinstall of Windows.
  2. change all of your passwords, especially banks or other
  financial sites.
  Ken Blake, Microsoft MVP

• Try to install Windows 7 from XP, receive the error message "Windows could not retrieve information about the disks on this computer.

  Try installing Windows 7 from XP and keep having this error message before choosing my instalation method, Windows not able to retrieve information about the disks on this computer.

  Because the migration from Windows XP to Windows 7 requires a clean install anyway, might as well you are backing up your important files and settings using Windows Easy Transfer and do a custom clean install by booting from the Windows 7 DVD.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• Satellite Pro P100: Can which digital cable I use to connect the stereo

  I just bought a new P100 and think generally that it's great.

  However, if I plug it into my stereo via the headphone to the front of the computer, then it is very noisy. I read somewhere in the manual that this Jack is used also in digital form - weird! Is there a way to transform digital or I'd be better connection on my external (stereo only) DAC. If this option is ideal so what cable should I - nothing about this in the manual or on the Tosh site. I use a stereo plug for cable twin phono right now.

  Any advice from someone who has connected to their own hifi would be appreciated.

  Bill Mac

  Hello

  The headphone jack offers the possibility to S/PDIF which allows to connect the laptop to the hifi on digital channel.
  You need a simple cable S\PDIF. This cable you can get from each computer/laptop.

  Simply visit this dealer and ask for this kind of cable

  By the way: try to disable the option of its virtual when the laptop is connected to the stereo

• WMC and RF remote, "do not detect the IR receiver.

  I'm setting up WMC and spin on the common problem of "cannot locate the IR receiver". I decided to go for a RF remote that I don't have a direct line of sight between the components. It is a remote control designed for WMC. I have everything plugged in and works. The remote is to talk to everything, including the set - top box. But WMC will not recognize the RF Receiver to replace the IR.

  I took a glance at the manual to
  http://www.gyration.com/index.php/us/support/downloads.html
   
  It seems that you have to "bind" the receiver to yourPC and buttons
  along the top to determine how it operates in (IR for decoders, RF for)
  PC, etc.) and that there may be software, you must install - I can't tell if
  the software is just to control other things.
   
  You must install the driver software for the computer first, then plug it
  USB cable for the receiver. If you have an onboard eHome receiver, you can
  to disable it in Device Manager.
   
   
  On Saturday, July 17, 2010 21:22:50 + 0000, booyet wrote:
   
  >
  >
  > I have a Gyration Air music remote.  The (cam with remote) RF Receiver and the TV are connected to the PC. Remote air has 'learned' decoder and TV remote and control both.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• FrontMic is treated as the stereo mix.

  Whenever I plug in my microphone and Windows detects it as FrontMic, he treats as if it were the stereo mix. In fact, when I go to a program like Teamspeak and try to talk, all his read on Windows 7 is released instead of my voice.

  Thanks in advance.
  Info:
  My helmet is a Steelseries Siberia v2.
  I am running Windows 7 Home Premium
  EDIT:
  http://www.YouTube.com/watch?v=BxmzN7-RF0w <-- video="" displaying="" this="" problem="">

  Hello

  1. not the same problem occurs when you use the device on another computer?
  2 have you tried the suggestion from my previous post?
  You can contact the manufacturer of the device and check out what they have to say on the issue:
  http://SteelSeries.com/products/audio/SteelSeries-Siberia-v2

• Microsoft Silverlight will / can send information about the people and the info on their computer. What are the plans for Firefox to protect its community of users of this?

  After reading the privacy statement from Microsoft regarding their Silverlight 5, it has troubling information about the loss of his privacy, under the "collection and use of information...". "the personal information and the information on my computer! In addition, information may be stored outside of the United States! (paragraph 4 under "collection and use of information... »). As part of the FireFox community, what other options do we have?

  P. S.
  I clicked on "Shared Data" on my Firefox browser, that means all average data? All good or bad I should know about?

  Hello 010matrix010, firefox will not run on the default Web sites, but only silverlight content when a user activates explicitly the plug-in through the icon in the address bar or click on the embedded content.
  also the support for plugins like silverlight in the browser will be dismantled at the end of next year: https://blog.mozilla.org/futurereleases/2015/10/08/npapi-plugins-in-firefox/