Podcasts don't downlown not, just play.
On my mobile (HTC Desire) if tries to download the podcast from the BBC goes directly listen to the podcast, no option to save him.
Hello, you can long tape somewhere on the player interface and select Save audio/videoin order to download the file.
Tags: Firefox App
Similar Questions
-
A Notification alert text - not always play a sound?
Hello-
I'm new to these forums and I've been skimming them for about 2 hours now and I have not seen this question posted anywhere, so I hope this is a new post.
We should now know all that we can change our text alerts to be our own custom - ringtones very well!
My problem is that, sometimes, the alert displays on the phone, but for some reason, the sound does not play.
Does anyone else have this problem? Most of the time the text alert plays very well, but sometimes after a long time don't receive any text message, or if I get some time after another, it is not just playing the tone. All the volume controls in the settings are cranked up to full speed, but the tone does not sound right. Unusual? I think that Yes... but maybe I'm not alone.
So, it looks that the device is not sufficient to allow his awakening. If you have not already done so, you can do a wipe applications and data from device information, reset the Options, delete Apps & data, (all PIM data on the device will be deleted and then restored you backup such as Palm or Google profile source, etc.). This can solve the problem and is worth a try. I would like to perform a manual backup of backup before you try this option.
If you have already tried this option, you can download and run Web OS doctor to repair the ROM on the device. You can get this information from www.palm.com/ROM, you enter the serial number and download Web OS Dr. and follow the instructions.
-
Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you
It's a delicate issue... like some patches cannot stipulate pitchbend...
But to quickly test your pitchbend wheel actually works properly...
Download the free lunch monitor...
Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.
-
Original title: unable to disable my lan connection
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
I turn off my connection to the local network, it is showing message.
It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.
Please answer soon
You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi MVTDA,
You can try the following methods and check to see if it helps:
Method 1:
a. Click Start and select run, type cmd and click OK.
b. type net stop cryptsvc and press ENTER.
c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.
d. restart the computer.
e. open new command prompt and Type net start cryptsvc, and press ENTER.
Method 2:
If the same problem persists then you can try to uninstall the network drivers and check.
a. click the Start button. Select run, type devmgmt.msc and press OK.
b. Select the network card and right click on it.
c. now, select Properties.
d. in the Properties window, on the driver tab, click Uninstall.
e. After you have uninstalled the drivers, restart the computer.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How I just play all my songs randomly in my v12 to Windows Media Player library?
How to play just all my songs randomly in my v12 for Windows Media Player that are in the library?
It seems that I must make a playlist named 'all' select all the music then play this list. So I need to do each time I have download more music on the computer. New music in the library that it scans the concerned disks but then reading list "all" is old and lack the new songs. There must be an easier way that I'm missing that works without need to create a new play list whenever I have add new music to my computer. Anyone know?The right limit MP3 was just an example, they touch the part that is in you is to customize the filter for your library: "then, we must take a test that corresponds to all the songs.
Another option is to simply add a "sort by", which filter actually at all. Then, you just play with Shuffle on if you want to ignore the sorting criteria.
You can add a file type filter, and even if the mp3/wma/wav files selector is a drop down, if you click on it and then start to type, you can type "blah" and change the first drop until "is not. That said, includes all files that are NOT of type of file "blah". This means that all file types will be paired because he is not a real file of 'blah' type I tested and it works fine.
Similar approach could be taken with any of the other filters such as title/Album etc. by selecting "Filename" 'Is not' 'asdflkjsdflskjfsd' and that includes all the files except the one named "asdflkjsdflskjfsd" music :)
Another approach would be to just use a filter aside and say 'at least is' 'Unrated', which will include essentially all of the songs that they have a side or not. I don't know if some of the more obscure types of music files will have sides, but as I don't know where this information is stored, certain types of files may not support it.
"More...". ""File size""is at least""0 ".
I could go on.
-
For example, I go to http://jwplayer.com and when I click to see the video I get the following error:
"Error loading of media: file could not be played.Now for the other mistake... I go to a site where the video looks to his will start and it turns white with the error "html5: badly encoded video."
I went to http://detectmybrowser.com and in the section check the HTML5 video webm and h264 are red (which means that I don't have these plugins that I guess)
Then... How to fix this?
Maybe you need this:
Windows Media Feature Pack for Windows 7 N and Windows 7 KN: -
Firefox don't support not any page after some time.
I'm having a problem with firefox while surfing after a while. For example, during the first 15 minutes, there is no problem, after a while firefox does not load any page, I have to close and reopen again to make it work. While firefox does not load, I can use other browsers as usual. It just don't load not any page at all, but the program itself is so I can close it with the X button. What could be the problem, I'm using firefox last.
The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.
Try to decrease the value of the pref Network.http.Max - connections 256-30 such as used in versions of Firefox 3.
See also:
-
IPod Nano 7th gen... podcasts don't sync to itunes. synchronization for podcast is on... im confused. THX!
When you say "synchronization for podcast is on", have you done the following...? Select the iPod in iTunes (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window. The side left (in the sidebar), under settings, click Podcasts. Right, Podcasts from iPod settings screen. If the checkbox for synchronize Podcasts is not checked, check it. Activates the automatic synchronization of podcasts. Set up this form as you wish, to tell how to synchronize episodes of the podcast to iTunes and click apply.
If sync Podcasts has been already verified, describe how you have the rest of the screen of the iPod Podcasts settings put in place (or include a screenshot of it).
-
TEMPRO is terrible - surely it's not just me?
TEMPRO warns me of Toshiba-the author software updates. Fine.
It found updates are available for my particular Tosh. Fine.
The alerts have a "Alert Details" button that I can click, and it takes me to a site Web of Tosh. Fine.
He then presents me with a WHOLE PAGE of downloads - dependent on the manufacturer of chips (for example) my WiFi adapter, with no easy way for me to put in place the right pair, without going into Device Manager. NOT GOOD AT ALL!
If Tempro can determine that my Tecra needs an update, probably, it can determine the RIGHT update?
I am engineer, quite capable of understanding what is happening here, but still I dropped in front of no easy way to determine what download was necessary.
All the world is it?
No it's not just you. Many other people is confused with Tempro.
For this, I have a good tip: don touch t well running system and remove Tempro system.
To do this, and take advantage of your laptop. -
Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.
I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem. None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.
I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.
I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.
Drivers that do not work on Windows 7 32-bit are:
Realteck RTL8188EE 802 - 11 b/gn witeless lan
Die Ethernet Realteck and
Intel High definition graphics driver
That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.
So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?
Hello:
Should be no problem to get W7 32 bit to work on this model.
Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.
Your model uses only the Intel HD graphics driver.
The first pilot, you need to install the Intel chipset installation utility and reboot.
Audio: Accept the agreement. Download and install the driver first on the list.
If for some reason, this model Intel HD graphics driver does not work, use this one...
https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713
-
My CD/DVD drive don't bed not any disk.,.
DVD player, CD/DVD drive properties don't bed not any disk, said this device works, crossed the convenience store and checked the Device Manager and it says that the drivers are there and working, but the player will still not CD/DVD read, and it hangs my PC when I try to play a CD/DVD. So what's the problem?
Hi williamroyce,Follow the steps listed in the section "Let me fix it myself" from the link below and check if it solves the problem: -
For about two days, my sound is really starting to * me off. = D now, the problem is that it seems to you that it works (its icon in the lower-right corner is white and with three soundwaves), however, there just not sound at all. When I try to test my sound in Control Panel, it says "the test sound could not be played." When I go into the Device Manager, it says that everything is up to date and working correctly. Also, when I try to play any audio or video file in WMV, he said is a problem and it stops at the video. I tried deleting and reinstalling all audio drivers and then it works for about two minutes, but then it stops working again.
The following article might be worth a visit:
Windows 7 - no sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
(valid for XP - Vista - 7) -
CDRom does not work and the DVD player does not work. Have you checked the two drivers are up-to-date.
Hello
For the 6to4 card number, which is separate from the issue of the CD/DVD.
Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore errors if you wish and on some
computers, it will always be there but no problem to be expected.On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520==============================================
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
If necessary:
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
BlackBerry Smartphones PDF attachments don't display not correctly
Make & model - Bold 9700
Carrier - AT & T
BES 4.0 Server
Symptoms:
Open attachments, attachment recovery begins, I noticed with a pdf attachment 30 k will download and show, not readable but. Very slow.
With an attachment k 600 recovery freezes, have to keep clicking more until the download is 100%. Attachment always shows don't step properly, just white is displayed.
Have no idea and really could use it little assistance. Thank you.
Also check with your BES admins to see if there is anything they can help with. Also, try the following steps:
Hello!
I suggest the following:
(1) registry HRT
- Homescreen > Options > Advanced Options > host Routing Table > BBKey (it matter little what line is current) > sign up now
(2) Service reference books
- KB02830 Send the directories for the BlackBerry Internet Service
- KB03577 How to return the service directories to smartphones BlackBerry in BlackBerry Enterprise Server
(3) restart to take batt
- Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.
I hope that will move things again for you!
-
Chapter Playlists do not completely play when built with Encore CS5 projects DVD double layer
Friends,
I don't know if this is a problem that is known or not.
SETUP: I created a project in Encore CS5, basically, it's a movie of 2 hours and there are 2 songs in the film. The film consists of 15 chapters. I created a chapter of playlists to listen to the songs. I have three selections of chapter that are configured in the following way.
SONG1 CHAPTER PLAYLIST-> chapter of a song is added to this selection. The actual number of chapter is 2.
SONG2 CHAPTER PLAYLIST-> chapter of the second song is included in this playlist. The actual number of chapter is 10.
CHAPTER PLAYLIST-> SONGS it contains two chapters (Chapter 2 and chapter 10).
All of the above chapter playlists are linke to their respective button in the Menu of songs.
: Project Encore CS5 for a DVD (dual layer)
Menus: I have three menus, main Menu, Menu of songs and Menu chapter.
Timeline: A chronology (MPEG2-DVD encoded thro first Pro CS5).
Audio: Audio (PCM)
Subtitle: A SubTitleTrack
QUESTION: In the Preview mode all the chapter playlist play well and return to the Menu of the time songs that they are played completely. But when the project is built, read the DVD, this is the question I.
1 SONG1 CHAPTER PLAYLIST (contains chapter 2 only) works very well, played in full.
2 SONG2 CHAPTER PLAYLIST (contains chapter 10 only) go back to the Menu songs after a few seconds, does not fully play.
3. all THE CHAPTER PLAYLIST SONGS (contains chapters 2 and 10) play Chapter 2 completely and starts Chapter 10, but returns to the Menu songs after a few seconds (same SONG2 CHAPTER PLAYLIST behavior).
Please let me know where is the problem and can also let me know if you need additional information.
Thank you and best regards,
Vinciane
Well, that's a problem with jumps of Encore.Encore layer creates a sordid cell to the place where the layer break is applied which once encountered during playback causes the action to end execution.
To resolve this issue, do one of the following-
Manual layer jump 1) apply exactly to the point of chapter. (I think that currently the automatic layer break is trying to apply the layer break in Chapter 10). To apply the manual layer jump, in the building Board select thenbuild and manual layer jump. A dialog box to select the layer break will appear. In this dialog box, you can specify the time code of Chapter 10 to which layer break must be applied.
(2) if above does not solve your problem, try applying manual breaking down images before Chapter 10.i.e. If chapter 10 starts 00:49:55:20, are trying to apply the layer pause at the end of Chapter 9 of 00:49:55:10.This way which you will lose only a few frames of Chapter 9, but will be able to playback of the entire DVD.
Let me know if it helps.
Thank you
Maybe you are looking for
-
WTF? Where are the settings?
-
How can I solve "content encoding error."
Many sites (including mozilla) without giving me the error message above - now work with other browsers and I am disappointed that, after searching the web everywhere seem to many people with the same problem but no solution.
-
I was unable to find a way to resolve the "one finger click" on a box just out of the Apple Magic Trackpad 2 that I bought with a new, end of 2015 the iMac retina. After anticipating the joys of the use of any force touch multi-geste on the new mtp2
-
M4 Aqua cannot connect on the T-Mobile network
Hello all I'm new hereToday, as I just bought a Sony Xperia M4 Aqua E2363 Dual SIM. But the problem is when I'm insterting the nano-sim after the process of restarting failed to connect on the network at all, when I go looking for networks, looming T
-
How to clear the ListField component
I have a custom component ListField, who is quite simple - it is the feature primary method of painting. It uses ListFieldCallback callback = this.getCallback (); to get the data. But I have a problem with this table of compensation? the list (this c