PoE 3502i WAP & Catalyst 3550 and 4500

Similar Questions

• Catalyst 3550, SecureCRT > COM3 connected > Blank Screen

  Day 1

  Hello

  I am very new to the CISCO world! Preparing for CCNA and thought having a laboratory at home would be a good idea! Got stuck on the first session never :(

  I got Catalyst 3550 which is connected via a USB-Serial cable, after 2 days has got to get it connected to the COMM port. However when I run my switch with SecureCRT open, it does nothing. Just a white screen.

  Could not find good help online, may be new to the world of networks and research my problem with wrong keywords. Finally I thought to go to the CISCO forum looking for an answer to my problem...

  Everyone, please help!

  Much appreciated! :)

  Day 2

  After a few hours of waiting and trying a few other things, thought to try if the COMM ports are working OK or not.

  Using Windows command prompt.

  Echo Hello > COM1 (directed by management of devices in use) return no error message doesn't mean works great!

  Echo Hello > COM3 (as directed by management of devices in use by my USB serial adapter) return no error message doesn't mean works great!

  However when trying to glazier, SecureCRt and Tera Term my Catalyst 3550 does not load anything on the screen and just a blank screen with blinking cursor.

  Someone please help!

  Hello

  other options:

  -use another COM port

  -updated driver for USB-to-serial adapter

  -use another USB-to-serial adapter

  -use another outside the secure crt terminal emulator software: PuTTY teraterm, hyerpterminal,.

  -Try another PC/laptop (the oldest is serial port)

  -Try a USB-to-serial cable and console on another router/switch

  If all else fails, I propose to replace the 3550.

• support the catalyst 3550 dhcp depend on 802. 1 x

  Hi all

  the catalyst 3550 does support user dhcp depends on authentication for 802. 1 x? Someone try this and does anyone have an example?

  Thanks for help

  Best regards

  Uwe

  I don't think so

  http://www.Cisco.com/univercd/CC/TD/doc/product/LAN/c3550/12114ea1/3550scg/swdhcp82.htm

• Cisco Catalyst 6509 and 6513 goes into config race disk0: / Backup Script

  We use a Cisco Catalyst 6509 and 6513 switches in our network LAN and Man.

  Please help me and share the script to take backup of all respective running to their disk0 configuration switches: / per week.

  Double post.

• Cisco Catalyst 6509 and 6513 running config backup to their respective disk0: / Script

  We use a Cisco Catalyst 6509 and 6513 switches in our network LAN and Man.

  Please help me and share the script to take backup of all respective running to their disk0 configuration switches: / per week.

  Kind regards

  Vinay

  Double post.

• Uninstalling ATI catalyst Manager and ATI catalyst control center.

  So Im STILL, try to install windows 7, but honestly I am beginning to have some sort of fear. Its asking me to uninstall the ATI catalyst Manager and ATI catalyst control center. I was able to uninstall ATI catalyst not Manager control centering forest. I was wondering that if I have to reinstall them back and if so, how to do this. Is that going to affect my laptop, I seriously can't afford a new computer laptop im a student on a budget tight. Anyone can shed some light. Is it safe to actually upgrade, I contacted HP, and that's what they said.
  I want to just confirm that we do not recommend to upgrade the operating system, we do not support the operating system pre-installed and tested on your laptops.
  Its hardware is capable of upgrade to windows 7 but I want to just confirm that we do not recommend the upgrade if your laptop does not come with the windows upgrade option 7.
  Someone please help! Update affect my computer?

  Oh God, that doesn't sound so appealing to me. I think that just keep patient windowsvista. I had problems with installing wondows 7 since day 1, I think it's a sign. THANK YOU SO MUCH! You have been great. Seriously, thanks for your time and patience.

• I have a subscription to creative cloud but I want only muse and catalyst for business as a minimal or muse, catalyst, indesign and photoshop. Is there a plan, can I change which will integrate any one of these two options and if so how much it cost? and

  I have a subscription to creative cloud but I want only muse and catalyst for business as a minimal or muse, catalyst, indesign and photoshop. Is there a plan, can I change which will integrate any one of these two options and if so how much it cost? and how to convert my membership to which? Thank you, Linda

  You can opt for the one application CC if the product is available. The CC app cannot be designed according to the choice.

  We bundle for Photo Shop bathroom & light only.

  Concerning

  Stéphane

• HP Envy 4500: HP envy Wi - Fi printing and 4500 - half page only

  I'm trying to print from my HP envy 4500 from my top of Dell Windows 7 Desktop Professional.  I only get half of the page and the printer never ends the book, so I always have to pull him out.  It's so weird, because all my HP printers before the pages flew and I always pick up out of the ground.

  The amount of data, I get a page can vary - sometimes a few more lines than the other.

  Sometimes I get the header of a page on another page background (for a while I thought it was a problem with the paper, but this can happen many times even with a few pieces of paper (no stuffing).)

  I turned on and off several times and still no luck.  Please advise!

  Hi @kwhitebuy,

  Welcome to the HP Forums!

  I noticed that you can print half page, with your HP Envy 4500, Windows 7 wireless printer. I'm happy to help with this problem!

  What happens when you try to print a test page from the printer control panel? Video: printing a Test Page. The same thing happens?

  If so, please try the steps outlined in this guide, an "out of paper" message. As it will show you how to clean the rollers in the printer. (Even if the title of the guide may not correspond to your question, I think that the solutions will help.)

  If the same is not the case, please try our HP print and Scan Doctorand let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this helps and have a nice day!

• AllinOne want 4500: OSX 10.6 and 4500 want to crash HP and Capture of Image

  Thanks in advance for the help.

  Running OS x 10.6.3 Snow Leopard on an iMac 2 GHz Core 2 duo with 2g of memory.  I installed the software included for 4500 want disk and configure the wireless connection. The machine will print wireless with no problems. The unit will not scan wireless or connected by usb. The unit will not recognize the iMac. After working with the Mac since 1999, I think that I have set up the queue correctly.

  HP software "turn the analysis" check box is selected, but the orange button is lit indicating that no computer is available. Information system recognizes the unit both wireless and when it is connected through usb. Attempt to analysis whether the HP software crashes. Image Capture Software Apple also blocks.

  I did the uninstall and trashed the preferences of hp. I downloaded the software FRO HP and reinstalled. The same thing is happening, help or opinions are appreciated.

  Hello RudyKatz,

  Thanks for the update and humor!  Glad to hear that the analysis of the problem has been resolved.  Preview is another in-OS for scanning and I aplologize option for not only suggesting and the Image Capture.  You also mentioned that since I use an extract successfully, that the HP scan software also worked without problem.  Image capture since you used?  What were the results?

• PoE for Cisco Catalyst 2960PD-8TT-L

  Hello

  Will deploy this device for a small office. Just a quick question, a Cisco Catalyst 2960PD-8TT-l switch provides PoE on all its 8 ports or simply powered through his PoE uplink port.

  Read the URL below, but did not have much info. TIA!

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps6406/produc...

  Sent by Cisco Support technique iPhone App

  Sorry John, my comment is not directed at you.  The link you posted, the content is very, the lack of a better term, misleading.

  http://www.Cisco.com/en/us/products/ps12200/prod_models_comparison.html

  Go to this site instead.  It shows that the model you have chosen has NO PoE.  Instead, it uses the PoE of a switch upstream to turn.

• Problem with VLAN between Cisco Catalyst (3560G) and SG300-52

  I am having trouble with the creation of a trunk of vlan between a SG300-52 and a Cisco Catalyst 3560 G.  I have 4 VLANS (1, 2, 10 and 11) on the 3650 and I need ports on the SG300 to be able to communicate with them.

  On the 3560, port 14 is defined as:

  interface GigabitEthernet0/14

  switchport trunk encapsulation dot1q

  switchport mode trunk

  spanning tree portfast

  On the Sg300 port 52 is defined as:

  interface GigabitEthernet52

  point to point link type spanningtree

  switchport trunk allowed vlan add 1,2,10,11

  description macro switch

  Try to understand what the problem... Any help would be appreciated.

  Thank you

  Chris

  Hi Chris, the first problem is the spanning tree portfast, it shouldn't be on an interconnection network switch. You may have a mismatch of vlan native as well, but that shouldn't matter.

  A suggestion, however, the value of the port SG300 general mode and disable the input filter.

  -Tom
  Please mark replied messages useful

• 3850 catalyst, MAB and RADIUS

  Hello

  This a 3850 catalyst drivers to speak (C3750 MAB auth works like a charm) and the strange thing is that I don't see RAIUS client sending packets button anywhere:

  Statistics of RADIUS #show
  Auth.      ACCT.       Both
  Length maximum inQ: NA NA 0
  Length maximum waitQ: NA NA 0
  Length maximum doneQ: NA NA 0
  Total number of responses seen: 0 0 0
  Packages with answers: 0 0 0
  Packages without answers: 0 0 0
  Access releases: 0
  Average answer delay (ms): 0 0 0
  Maximum response delay (ms): 0 0 0
  Number of timeouts RADIUS: 0 0 0
  Detects duplicate IDS: 0 0 0
  Buffer allocation failed: 0 0 0
  Memory (bytes) maximum buffer size: 0 0 0
  Malformed responses: 0 0 0
  Authenticators: 0 0 0
  Unknown answers: 0 0 0
  Source Port range: (2 ports only)
  1645 - 1646
  Used in last Port Source / ID:
  1645/0
  1646/0

  Time passed since the last reset of counters: 6h44m
  Distribution of radius of latency:
  <= 2ms="" :         ="" 0         ="">
  3-5ms  :          0          0
  5 10ms: 0 0
  10 20ms: 0 0
  20 50ms: 0 0
  50-100 m: 0 0
  > 100ms: 0 0

  Current length of the NQI: 0
  Current length of the doneQ: 0

  #debug talkative RADIUS

  All mac addresses are unable to authenticate

  #sh newspaper

  03007: 3 August 17:55:20.239 UTC: % MAB-5-FAIL: failure of authentication for the client (XXXX. XXXX. XXXX) on the Interface item in gi1/0/7 AuditSessionID XXXXXXXXXXXXXXXXXXXXXXXXXX
  003008: 3 August 17:55:20.239 UTC: % MAB-5-FAIL: failure of authentication for the client (XXXX. XXXX.XXX) on the Interface item in gi1/0/7 AuditSessionID XXXXXXXXXXXXXXXXXXXXXXXXX

  There entry context very log in debugging MAB invalid EVT 9 of the EAP (I don't know what it could be)

  MAB #debug all

  003085: 3 August 18:04:26.146 UTC: mab - ev: [XXXX. XXXX. XXXX, item in gi1/0/48] context MAB received create from AuthMgr
  003086: 3 August 18:04:26.146 UTC: mab - ev: MAB authorizing XXXX. XXXX. XXXX
  003087: 3 August 18:04:26.146 UTC: mab - ev: client context created MAB 0x1B00004B
  003088: 3 August 18:04:26.146 UTC: mab: State has original mab_initialize enter
  003089: 3 August 18:04:26.146 UTC: mab - ev: [XXXX. XXXX. XXXX, item in gi1/0/48] sent to create a new event in context of EAP of MAB to 0x1B00004B (XXXX. XXXX. XXXX)
  003090: 3 August 18:04:26.147 UTC: mab - ev: [XXXX. XXXX. XXXX, gi1/0/48 article] authenticating MAB began to 0x536EE850 (XXXX. XXXX. XXXX)
  003091: 3 August 18:04:26.147 UTC: mab - ev: [XXXX. XXXX. XXXX, item in gi1/0/48] Invalid EVT 9 of the EAP
  003092: 3 August 18:04:26.147 UTC: mab - sm: [XXXX. XXXX. XXXX, item in gi1/0/48] received event 'MAB_CONTINUE' on the 0x1B00004B handle
  003093: 3 August 18:04:26.147 UTC: mab: during the mab_initialize State, had 1 (mabContinue) event
  003094: 3 August 18:04:26.147 UTC: @ mab: mab_initialize-> mab_authorizing
  003095: 3 August 18:04:26.147 UTC: mab - ev: [XXXX. XXXX. XXXX] formatted mac = XXXXXXXXXXXX
  003096: 3 August 18:04:26.147 UTC: mab - ev: [XXXX. XXXX. XXXX] created mab nickname dot1x profile dot1x_mac_auth_XXXX. XXXX. XXXX
  003097: 3 August 18:04:26.148 UTC: mab - ev: [XXXX. XXXX. XXXX, item in gi1/0/48] from MAC-AUTH-BYPASS to 0x1B00004B (XXXX. XXXX. XXXX)
  003098: 3 August 18:04:26.148 UTC: mab - ev: [XXXX. XXXX. XXXX, item in gi1/0/48] Invalid EVT 9 of the EAP
  003099: 3 August 18:04:26.148 UTC: mab - ev: [XXXX. XXXX. XXXX, item in gi1/0/48] MAB received an Access-Reject for 0x1B00004B (XXXX. XXXX. XXXX)
  003100: 3 August 18:04:26.148 UTC: % MAB-5-FAIL: failure of authentication for the client (XXXX. XXXX. XXXX) on the Interface 0A48021200000FD1007B87DE AuditSessionID item in gi1/0/48
  003101: 3 August 18:04:26.148 UTC: mab - sm: [XXXX. XXXX. XXXX, item in gi1/0/48] received event 'MAB_RESULT' on the 0x1B00004B handle
  003102: 3 August 18:04:26.148 UTC: mab: during the mab_authorizing State, had 5 (mabResult) event
  003103: 3 August 18:04:26.148 UTC: @ mab: mab_authorizing-> mab_terminate
  003104: 3 August 18:04:26.149 UTC: mab - ev: [XXXX. XXXX. XXXX, item in gi1/0/48] delete profile of credentials for 0x1B00004B (dot1x_mac_auth_XXXX. XXXX. XXXX)
  003105: 3 August 18:04:26.150 UTC: mab - sm: [XXXX. XXXX. XXXX, item in gi1/0/48] received event 'MAB_DELETE' on the 0x1B00004B handle

  The configuration is below:

  RADIUS AAA Server Group XXX-XXXXXX
  Server 10.XX. XX.30
  Server 10.x.x.x. XX.30

  AAA authorization network default Group XXX-XXXXXX no
  accounting dot1x default start-stop group AAA-XXX-XXXXXX

  radius of the IP source-interface Loopback0

  RADIUS-server host 10.XX. XX.30 touches 7 XXXXXXXXXXXXXXXXXXXXXXX
  RADIUS-server host 10.x.x.x. XX.30 touches 7 XXXXXXXXXXXXXXXXXXXXXXX
  RADIUS server retransmit 0
  RADIUS 3 server timeout

  interface GigabitEthernet1/0/6
  XXXX XXXXX description
  switchport access vlan XXX
  switchport mode access
  switchport voice vlan XXX
  the host-mode multi-auth authentication
  authentication order mab
  Auto control of the port of authentication
  authentication timer restart 180
  MAB
  no link-status of snmp trap
  Storm-control broadcasts 0.50
  spanning tree portfast
  end

  #sh worm

  Model switch SW Version SW Image Mode ports
  ------ ----- -----              ----------        ----------            ----
  * 1 56 WS-C3850 - 48P INSTALL 03.07.02E cat3k_caa-universalk9
  2 56 WS-C3850 - 48P INSTALL 03.07.02E cat3k_caa-universalk9

  Any ideas?

  P.

  Your authentication dot1x missing "aaa".

• Cisco Aironet AIR-SAP2602I-E-K9 WAP config autonomous and roaming

  Hey guys,.

  I'm quite 'green' where wireless technology is concerned, but have a few questions, I was hoping that someone can help me with that.

  I have a number of AIR-SAP2602I-E-K9 from WAP that I would install in a standalone configuration (no controller). These will connect in our infrastructure from switch L2 giving access to our corporate network to wireless devices activate. In total, I have 10 WAP which will focus on 2 floors in our office building. I would like to set up seamless roaming allowing users to walk around the building without noticing that their device connects from a WAP to the other.

  I guess I just configure each WAP individually with its own static IP address and configure the SSID / wireless network / security but I am wondering if there is a method to export the config filled from a WAP and import in other in order to avoid the obligation to re-create the SSID and the configuration on each WAP again and again. I'm also not sure to know how then would set up roaming between the WAP and also how their awareness of each other (because I'm sure they should be to allow transparent roaming). I can't find any real documentation specifically this - only on controller based deployments.

  Pointers would be greatly appreciated.

  Thank you very much to anyone who takes the time to read this message and reply.

  Thanks in advance.

  Must be configured, no, but if your voice using wireless, you probably need to or if you also have sensitive applications.  The reason is the time it takes to perform a roam. If you watch this doc, go to the homelessness section and it will show you a few times homeless.

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/cuipph/7925g/7_0/...

  -Scott

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• How to create a mobile blog page layout, combining the Business Catalyst Modules and function of mobile design of Adobe Muse?

  The title says it all. I love the ability of Adobe mobile design Muse and tablet of layouts and became very fond of the workflow between Adobe Muse and Business Catalyst. The only problem I found is the ability to integrate the module blog on a drawing of the design or the mobile tablet. I understand that Business Catalyst has insert you a code of the tag to create a page template for the blog to sit in but is possible to have a mobile phone and Tablet for the same blog layout? I'd love if visitors read my blog from their phone, did not have to move from a phone on a desk combination available just to read the blog. Once they have read / switch the blog, they can no longer return to the mobile version of Web site due to the page template that I posted to the blog. Overall, I want just the ability to have the blog to adapt to all mobile, tablet and desktop versions. Any ideas?

  It's a very interesting question. Your regular blog module should be fine for the tablet. For some time I did a mobile in British Colombia, but I think you can add a template to another blog layout module and use it. You should be able to actually build a custom template in British Colombia for that as well. Maybe pop on the BC Forum and see. There is a guy named Liam on the BC forums who probably knows more about BC some of the engineers. ;-)

  You can also add a link to the mobile device quite easily. You can even hide the link and show the iff only that the user is on a phone using the {system_visitorDeviceClass} tag in British Colombia.

  More information on that here: Introducing tablet & phone support for sites