polarizers... linear vs. circular

Similar Questions

• What is the secret to make a new brush model?

  I'm doing a brush model. I followed all of the instructions contained in the help files, but I get an alert that tells me that my brush contains works of art that can be used in a brush model. In an effort to find out exactly WHAT work can be used in a new model of brush, I have almost all taken consecutively IN the work unless the box that contains the original model, but I still get the error message. I even tried to use the original model, but without success. As far as I see it, there is no way to truly create a new brush model!  :-(

  I searched this forum and found this same query frustrated in another thread from another user, but there are no answers. Is it really possible to truly create a model brush in Adobe Illustrator?

  Thanks for any help...

  DS9

  You cannot use certain constructions of brushes. The limitations are consistent with common sense. Grad fills, for example: grad Illustrator types are very limited (in big, linear or circular). If Illustrator is unable, for example, apply a grad fill that revolves around a stroke, it follows logically that it cannot fold one on the way to the spine to which is applied a Brush. Same kind of thinking goes for raster images (and Pixelation effects, which are the same thing), clipping paths, live mixes, etc.

  Some of these constructions can be 'Dumbed-down' ('extended' language Illustrator) to more simple constructions. You can, for example, to develop a mix or a Grad fill to convert it to a regular stack filled with solid paths. The group that results is then authorized by a brush. To do this, however, will not nuts with it. For example, you should almost never default 256 steps in a mixture.

  This may all sound very debilitating, but it really isn't. The image below was created with one ArtBrush, who began as a circle with a Grad Radial fill to grayscale, has expanded to a few steps, and receives an option of colorization in the form Options dialog box:

  

  JET

• My circular polarizing filter does not appear to be a very broad spectrum of change?

  Circular polarizing filters come in different strengths, or ranges of change?  Are all the filters polarizing C the same thing?  Yes, I know how to use them. I know that the angle of 90 degrees to the Sun and all that... I think I should be able to rotate the filter and see through the lens excactly what the change will be... frankly, I find it very difficult to see the amount of change in the blue of the sky with the filter I have... shouldn't you be able to turn the filter and observe the gradations of change?  Should not be obvious as in a ND filter?  Should I apply a filter, polarizing "stronger"?

  Polarizers can have different strengths.  Technically they should all be similar, because theoretcially they should eliminate all waves perpendicular to the axis.  But this is theoretical, and polarizers cheap may not be effective.  What brand?

  It is unlikely, it is a complete fake, but I wouldn't be completely surprised if you bought a cheapo somewhere.  I've seen a lot of sunglasses polarized are not.

  One thing: technically, it's not 90 degrees to the Sun, it's 90 degrees to a reflective surface.  The thinking was to polarize, which allows the polarizer to block.  The effect on the blue sky may vary, depending on how many reflection (haze) it is in the sky.  The best way to make sure it works is to look at the sunlight reflecting off something, like a shiny object.

• Circular button

  HY there, I found a volume button in JavaFx 2.0 at http://fxexperience.com/2012/01/fun-javafx-2-0-audio-player/

  I was wondering if there is an implementation that is already in the JFX 1.8

  You know, I mean a cursor as being "radial" or "circular".

  He would not even think of a circle where the button rotates around.

  I don't have the idea to start with it.

  Thanks for the tips,

  So long

  Harry

  Hello

  I could easily port code to JavaFX 8.

  The classes that I post here and one of the download page to check what has changed, you can diff.

  Most of the changes is in the skin class and they host mainly so that the change in the skin and the API behavior between JavaFX 2.0 and 8.

  There is also a correction of syntax for the gradient in the CSS file.

  I have made no other changes to another class and I just put the provided NetBeans project to use the current platform of the JDK on my system (1.8.0_72) and the project could compile and run.

  I have not tested if it works fully well, but at least I can turn the knob with the mouse when you launch the application, then you should check if all sliders work properly.

  Now that said, keep in mind that: it will work not in JDK9 as the API packages and private classes will become inaccessible. the fact that behaviour what API will still not made public did not help either.

  Behavior class

  package fxexperienceplayer;
  
  import com.sun.javafx.scene.control.behavior.BehaviorBase;
  import com.sun.javafx.scene.control.behavior.KeyBinding;
  import java.util.ArrayList;
  import java.util.List;
  import javafx.scene.control.Slider;
  import static javafx.scene.input.KeyCode.*;
  import static javafx.scene.input.KeyEvent.KEY_RELEASED;
  import javafx.scene.input.MouseEvent;
  
  /**
  * A Behavior for slider that makes it into a circular knob
  *
  * @author Jasper Potts
  */
  public class KnobBehavior extends BehaviorBase {
      protected static final List SLIDER_BINDINGS = new ArrayList();
      static {
          SLIDER_BINDINGS.add(new KeyBinding(TAB, "TraverseNext"));
          SLIDER_BINDINGS.add(new KeyBinding(TAB, "TraversePrevious").shift());
          SLIDER_BINDINGS.add(new KeyBinding(UP, "IncrementValue"));
          SLIDER_BINDINGS.add(new KeyBinding(KP_UP, "IncrementValue"));
          SLIDER_BINDINGS.add(new KeyBinding(DOWN, "DecrementValue"));
          SLIDER_BINDINGS.add(new KeyBinding(KP_DOWN, "DecrementValue"));
          SLIDER_BINDINGS.add(new KeyBinding(LEFT, "TraverseLeft"));
          SLIDER_BINDINGS.add(new KeyBinding(KP_LEFT, "TraverseLeft"));
          SLIDER_BINDINGS.add(new KeyBinding(RIGHT, "TraverseRight"));
          SLIDER_BINDINGS.add(new KeyBinding(KP_RIGHT, "TraverseRight"));
          SLIDER_BINDINGS.add(new KeyBinding(HOME, KEY_RELEASED, "Home"));
          SLIDER_BINDINGS.add(new KeyBinding(END, KEY_RELEASED, "End"));
      }
      private double dragStartX,dragStartY;
  
      @Override protected void callAction(String name) {
          if ("Home".equals(name)) home();
          else if ("End".equals(name)) end();
          else if ("IncrementValue".equals(name)) incrementValue();
          else if ("DecrementValue".equals(name)) decrementValue();
          else super.callAction(name);
      }
  
      public KnobBehavior(Slider slider) {
          super(slider, SLIDER_BINDINGS);
      }
  
  //    @Override protected List createKeyBindings() {
  //        return SLIDER_BINDINGS;
  //    }
  
      /**
      * @param position The position of mouse in 0=min to 1=max range
      */
      public void knobRelease(MouseEvent e, double position) {
          final Slider slider = getControl();
          slider.setValueChanging(false);
          // detect click rather than drag
          if(Math.abs(e.getX()-dragStartX) < 3 && Math.abs(e.getY()-dragStartY) < 3) {
              slider.adjustValue((position+slider.getMin()) * (slider.getMax()-slider.getMin()));
          }
      }
  
      /**
      * @param position The position of mouse in 0=min to 1=max range
      */
      public void knobPressed(MouseEvent e, double position) {
          // If not already focused, request focus
          final Slider slider = getControl();
          if (!slider.isFocused())  slider.requestFocus();
          slider.setValueChanging(true);
          dragStartX = e.getX();
          dragStartY = e.getY();
      }
  
      /**
      * @param position The position of mouse in 0=min to 1=max range
      */
      public void knobDragged(MouseEvent e, double position) {
          final Slider slider = getControl();
          slider.adjustValue((position+slider.getMin()) * (slider.getMax()-slider.getMin()));
      }
  
      void home() {
          final Slider slider = getControl();
          slider.adjustValue(slider.getMin());
      }
  
      void decrementValue() {
          getControl().decrement();
      }
  
      void end() {
          final Slider slider = getControl();
          slider.adjustValue(slider.getMax());
      }
  
      void incrementValue() {
          getControl().increment();
      }
  }
  

  Skin class

  package fxexperienceplayer;
  
  import com.sun.javafx.scene.control.skin.BehaviorSkinBase;
  import java.util.Optional;
  import javafx.event.EventHandler;
  import javafx.scene.control.Slider;
  import javafx.scene.input.MouseEvent;
  import javafx.scene.layout.StackPane;
  
  /**
  * A simple knob skin for slider
  *
  * @author Jasper Potts
  */
  public class KnobSkin extends BehaviorSkinBase {
  
      private double knobRadius;
      private double minAngle = -140;
      private double maxAngle = 140;
      private double dragOffset;
  
      private StackPane knob;
      private StackPane knobOverlay;
      private StackPane knobDot;
  
      public KnobSkin(Slider slider) {
          super(slider, new KnobBehavior(slider));
          initialize();
          requestLayout();
          registerChangeListener(slider.minProperty(), "MIN");
          registerChangeListener(slider.maxProperty(), "MAX");
          registerChangeListener(slider.valueProperty(), "VALUE");
      }
  
      private void initialize() {
          knob = new StackPane() {
              @Override
              protected void layoutChildren() {
                  knobDot.autosize();
                  knobDot.setLayoutX((knob.getWidth() - knobDot.getWidth()) / 2);
                  knobDot.setLayoutY(5 + (knobDot.getHeight() / 2));
              }
  
          };
          knob.getStyleClass().setAll("knob");
          knobOverlay = new StackPane();
          knobOverlay.getStyleClass().setAll("knobOverlay");
          knobDot = new StackPane();
          knobDot.getStyleClass().setAll("knobDot");
  
          getChildren().setAll(knob, knobOverlay);
          knob.getChildren().add(knobDot);
  
          getSkinnable().setOnMousePressed(new EventHandler() {
              @Override
              public void handle(MouseEvent me) {
                  double dragStart = mouseToValue(me.getX(), me.getY());
                  double zeroOneValue = (getSkinnable().getValue() - getSkinnable().getMin()) / (getSkinnable().getMax() - getSkinnable().getMin());
                  dragOffset = zeroOneValue - dragStart;
                  getBehavior().knobPressed(me, dragStart);
              }
          });
          getSkinnable().setOnMouseReleased(new EventHandler() {
              @Override
              public void handle(MouseEvent me) {
                  getBehavior().knobRelease(me, mouseToValue(me.getX(), me.getY()));
              }
          });
          getSkinnable().setOnMouseDragged(new EventHandler() {
              @Override
              public void handle(MouseEvent me) {
                  getBehavior().knobDragged(me, mouseToValue(me.getX(), me.getY()) + dragOffset);
              }
          });
      }
  
      private double mouseToValue(double mouseX, double mouseY) {
          double cx = getSkinnable().getWidth() / 2;
          double cy = getSkinnable().getHeight() / 2;
          double mouseAngle = Math.toDegrees(Math.atan((mouseY - cy) / (mouseX - cx)));
          double topZeroAngle;
          if (mouseX < cx) {
              topZeroAngle = 90 - mouseAngle;
          } else {
              topZeroAngle = -(90 + mouseAngle);
          }
          double value = 1 - ((topZeroAngle - minAngle) / (maxAngle - minAngle));
          return value;
      }
  
      @Override
      protected void handleControlPropertyChanged(String p) {
          super.handleControlPropertyChanged(p);
          requestLayout();
      }
  
      void rotateKnob() {
          Slider s = getSkinnable();
          double zeroOneValue = (s.getValue() - s.getMin()) / (s.getMax() - s.getMin());
          double angle = minAngle + ((maxAngle - minAngle) * zeroOneValue);
          knob.setRotate(angle);
      }
  
      private void requestLayout() {
          final Optional slider = Optional.ofNullable((Slider) getNode());
          slider.ifPresent(s -> s.requestLayout());
      }
  
      @Override
      protected void layoutChildren(double contentX, double contentY, double contentWidth, double contentHeight) {
          super.layoutChildren(contentX, contentY, contentWidth, contentHeight);
          // calculate the available space
          double x = contentX;
          double y = contentY;
          double w = contentWidth;
          double h = contentHeight;
          double cx = x + (w / 2);
          double cy = y + (h / 2);
  
          // resize thumb to preferred size
          double knobWidth = knob.prefWidth(-1);
          double knobHeight = knob.prefHeight(-1);
          knobRadius = Math.max(knobWidth, knobHeight) / 2;
          knob.resize(knobWidth, knobHeight);
          knob.setLayoutX(cx - knobRadius);
          knob.setLayoutY(cy - knobRadius);
          knobOverlay.resize(knobWidth, knobHeight);
          knobOverlay.setLayoutX(cx - knobRadius);
          knobOverlay.setLayoutY(cy - knobRadius);
          rotateKnob();
      }
  
      @Override
      protected double computeMinWidth(double height, double topInset, double rightInset, double bottomInset, double leftInset) {
          return (leftInset + knob.minWidth(-1) + rightInset);
      }
  
      @Override
      protected double computeMinHeight(double width, double topInset, double rightInset, double bottomInset, double leftInset) {
          return (topInset + knob.minHeight(-1) + bottomInset);
      }
  
      @Override
      protected double computePrefWidth(double height, double topInset, double rightInset, double bottomInset, double leftInset) {
          return (leftInset + knob.prefWidth(-1) + rightInset);
      }
  
      @Override
      protected double computePrefHeight(double width, double topInset, double rightInset, double bottomInset, double leftInset) {
          return (topInset + knob.prefHeight(-1) + bottomInset);
      }
  
      @Override
      protected double computeMaxWidth(double height, double topInset, double rightInset, double bottomInset, double leftInset) {
          return Double.MAX_VALUE;
      }
  
      @Override
      protected double computeMaxHeight(double width, double topInset, double rightInset, double bottomInset, double leftInset) {
          return Double.MAX_VALUE;
      }
  }
  

  CSS (fixed the linear gradient towards the end of the file):

  #volume .knobOverlay {
      -fx-background-color: linear-gradient(from 0% 0% to 0% 100%, rgba(255,255,255,0.1) 0%,  rgba(0,0,0,0.5) 100%);
      -fx-background-radius: 500;
      -fx-background-insets: 0;
      -fx-background-image: url("images/volume-highlights.png");
      -fx-background-position: center center;
  }
  

• How to make a circular path of camera

  Hi all

  If I'm using Orbit Camera Tool, it creates a linear camera path. How can I create a circular? I need the camera to move smoothly, but not as a series of linear route.

  I could add vertices to a path and edit manually, but no doubt, there is an easier way to do this.

  Please notify.

  Thank you!

  Maltaannon has a good tutorial on building a platform camera to achieve with ease - and a script to automate if you want to speed things up for a price.

• Make a linear path to a path of circle

  I'm relatively new to Illustrator and trying to figure out how to change a linear object in a circle object. Below, you will see that I have a "River Road" (really just also spaced "waves" on a straigh line) in blue and a circular ring in yellow (crossed out red).

  I want to wrap the "River Road" to replace the internal path race red of the donut/circle. [I would also like to make a second version with the 'waves' on the outside of the ring/circle, so help would both be great.] Basically, I want to take an anchor to the end of the path of the 'River' and wrap it around a circular path until it meets the other end anchor.

  I tried using effect-> Warp-> Arc, and then copy the path and reflect, however, does not produce the effect of CRA real semicircle (see below).

  I read another thread here on the a with an 'art brush', but I don't know how to do this without more details than that post of the contours. If anyone knows how to do this with the art brush, I would be grateful orientation.

  Or any idea for my goal - a doughnut with the waves on the inside edge (and then again on the outer edge).

  CommCo,

  An Artbrush like a wave will keep the number of ridges and stretched to fit the path, it is applied to.

  You can:

  (1) create the wave as a continuous path with the correct number of coats of arms;

  (2) drag it to the paletee/panel shapes and drop it on the button new brush, just use the default values and name;

  (3) select the path (inside/outside), and then click the brush of wave.

  If you have ridges on the opposite side of a path, you can either create an another Artbrush checking everywhere, Flip or reverse paths (one way is to use the free reverse script here: http://park12.wakwak.com/~shp/lc/et/en_aics_script.html).

  And you can adjust the height of the wave/thickness by changing the weight of the race in the stroke palette/Panel.

• Linear gradient that follows a circle?

  Hello
  
  It must be something really simple, but I googled until I can't see straight and still have not been able to find the answer. I'm not too with the flash tools, drawing, so I'm not familiar with them. All I'm doing is create the preloader rotating little circle that you see everywhere, and I can't figure out how to get the linear gradient follows a circular path. If you don't know exactly what I'm talking about you, Adobe.com uses the same few rotating preloader circle on its home page. Can someone point me to a tutorial or just tell me how to do? I think there must be something simple that I'm missing.
  
  Thank you!
  Holli

  Holli,
  YER right - harder than it looks. Flash doesn't have the ability to bend gradients :(
  But you can simulate it:
  http://www.Mudbubble.com/downloads/loading.html
  http://www.Mudbubble.com/downloads/loading.zip

  Basically, I used a linear gradient and a small Ribbon to only show the part of the slope, I needed.

  It will be useful.

  ******************************************
  --> * Adobe Certified Expert *.
  --> www.mudbubble.com
  --> www.keyframer.com

  Wolli World says:
  > Hi,.
  >
  > It must be something really simple, but I googled until I can't see
  > straight and still have not been able to find the answer. I'm not too
  > with the flash drawing tools, so I'm not familiar with them. All that I am
  > try to do is create the preloader rotating little circle you see
  > everywhere and I can not figure out how to get the linear gradient to follow a
  > circular path. If you don't know exactly what I'm talking about, Adobe.com
  > use the same little rotating preloader circle on its home page. Can anyone
  > point me to a tutorial or just tell me how to do? I think it happened to
  > be something simple that I'm missing.
  >
  > Thank you!
  > Holli
  >

• Is there any function of linear programming in numbers version 3.6.2?

  I know there is no function of linear programming in numbers until 2011 (read all the old posts). I want to know is there any moment or Apple is still quite complacent to do something. In my class, I introduce spreadsheets and I choose to submit in numbers instead of excel, now I can't change my choice if I have to then I have to take excel classes and change all my previous worksheets which is equivalent to a failed in the class and object of repetition. I'm the only one facing this problem because I am the misfortunate, who made a mistake to love Mac. And in if he makes Apple feel better hear it "I manually fix (just had to learn any other way) linear programming models and then draw, while windows users use the built-in, they. Thank you Apple

  If you try to get the settings for a better line did I suggest to use linest() function:

  

  LINEST() is a function of linear estimation.  I suggest that spend you some time to familiarize yourself with the functions that offers numbers by typing the equal sign in any cell, and then looking through the list of functions on the right.

  To use the line eating function do something as show above, enter the data X and Y in the columns, as shown.  To get the slope (m in my example), select cell E2 and enter the formula:

  INDEX (LINEST (B2:B11, a2:a11, false, Nonzero-y-Intercept), 0)

  shortcut for this is:

  E2 = index (LINEST (B2:B11, a2:a11, Nonzero-y-Intercept, true), 0)

  to get the y:

  E3INDEX (LINEST (B2:B11, a2:a11, false, Nonzero-y-Intercept), 1).

  There are additional stats in the table linest() returns.  Read about it in the built-in help

  I hope this helps

• I need the circular activity icon that allows you to be in the classic toolbar.

  Hi, I, m the need for points circular icon that notifies you that an activity is underway. Please let me know if I can get it back. Thank you very much.

  You want the back throbber. In my view, that it has been deleted. You can get a replacement of:

  • https://addons.Mozilla.org/en-us/Firefox/addon/throbber-restored/

• When I mouse over a tab active, a circular symbol "block" appears and I can't close the tab or by clicking on

  When I'm in FireFox and I smile any area that normally would allow me to perform an operation, select a tab, close a tab or fill out the text in this area of details, a circular 'block' symbol appears and keeps me enter or do whatever it is. I scanned all the programs installed in the control panel and removed something suspicious and reviewed addons and other in FireFox, all anything will do. BTW, this problem does NOT occur in Google Chrome, but I prefer FireFox. Help!

  Note that your system details list shows several Flash plugins.

  1. Shockwave Flash 11.9 r900
  2. Shockwave Flash 11.8 r800

  You can find the installation path of the plugins on the topic: plugins page.

  You can view the Flash player for several plugins Flash player installation folder and delete all (older) versions of the plugin (NPSWF32) and (re) install the latest Flash Player.

  • (32-bit Windows) C:\Windows\System32\Macromed\Flash\
  • (Windows 64 bit) C:\Windows\SysWOW64\Macromed\Flash\

• FIRST HP: Solving a system of linear equations with a parameter

  Hello

  I know how to solve a system of linear equations by using a setting by hand but I don't know how to set up in the calculator.

  Can someone please help me solve the system of linear equations below with a 'p' on the first HP Calculator next parameter?

  2 x + 8z = 26

  4 x-4y-14z = - 38

  8 x - 4y + 2z = 14

  The answer to the above equations is:

  x = 13 - 4, =(45-15p)/2, z = p y p

  Thank you

  Arthur

  Hello

  What you're trying to solve is not really a system of equation with a parameter, but you try to solve a set of 2 equations with 2 variables (x and y).

  The case solve command can do for you.

  According to the CASE, type:

  Solve ([(2*x+8*z) = 26,(4*x-4*y-14*z) = - 38,(8*x-4*y+2*z) = 14], [x, y])

  Come in

  and the calculator will return

  {[-4 * z + 13, 15/2 * z + 45/2]}

  which is what you want.

  Cyrille

• Multiplication of cross-checking (circular convolution)

  Hello

  To make the circular convolution of vectors, I would like to make:

  FFT-> multiplication cross-check (W = u * V in MATLAB)-> IFFT

  for example [1 1 1 1 0 0 0 0] with himself-> [1 2 3 4 3 2 1 0]

  Is there an easy way to do this multiplication on the 50g, or a cross-check order direct cconv?

  Thanks in advance

  Hi, yYou can use the same commands with the 50G

  FFT

  IFFT

  For cross-checking multiplication on the 50g, try HADAMARD / / shift MATRICES OPER NXT HADAM

  RPL mode

  [1 2 3] [4-5-6] HADAMARD

  [4-10-18]

  In rpl:

  [ ... ]

  [ ... ]

  FFT

  HADAMARD

  IFFT

• Solve this linear system HP50g

  Hi guys,.
  I am an engineer in electrical engineering and have to solve systems of linear equations on a regular basis, so that the functionality is very important for me. Everything works very well, 95% of the time but sometimes I meet systems that the HP50g doesn't seem to like. For example one below.
  
  I want to solve for x, y, z and one in terms of V
  
  V- 100000 x +is-100000 100000x= 0
  -250000is-V+ 100000x100000z= 0
  -250000z+ 100000one+ 100000y= 0
  a+ 100000-250000z= 0
  
  After these 4 equations is on the stack, I'm them in a vector by pushing {4} in the stack and then by pressing -> ARRY. Then I push the variables I want to solve for the battery, x, y, z and a and a vector of them. Then, I use LINSOLV to solve the system. However, when I do it this way, the calculator gives me an equation for x, an equation for y and 2 equations for z and no equation for s. I'm not sure what I'm doing wrong. Is there another way to do that would give me 4 equations, one for each variable I want to solve for in terms of V?
  
  If my method to solve linear equations is somehow confusing, I basically followed this video
  http://www.YouTube.com/watch?v=z802L29JyQE
  
  Thanks in advance.

  Hello

  Do not know exactly how you typed, so I'm being explicit just for some b:

  Notes:

  (1) as an equation is entered, use ' '

  (2) it is preferable to use a comma to separate the real and imaginary parts

  (3) explicit use multiply

  If the entry will look like this:

  '(4,3*X) = (4.7)'

  For this simple equation and assuming that X is defined as an independent variable (reproduced by 'X' in the top middle of the screen), you can use SOLVEVX for this one: (No. 5 in S.SLV menu or F5 if you use soft-keys)

  with "_Approx" uncontrolled, the answer is:

  X = 7/3

  with "vabout" checked the answer is:

  X = (2.333333333,0) (although X is part of the imaginary number, it is himself a real number).

  Kind regards.

• Linear system

  Hi guys!

  I'm working with electrical circuits and I need to know how to solve a linear system with more than 03 variables, such as a 5 x 5 systema.

  How can I solve it?

  Hi!, @Jucimar_C:

  Try, if they serve, the Spanish language, the following examples video...

  FIRST HP: RESPOND TO SISTEMAS ECUACIONES...

  YouTube app

• Linear keyframe on a shape mask?

  I applied a mast of form to a video and when I add keyframes to make it move in the clip, do it with gentleness keyframes (movement starts slow, speeds up, slow ends). However, I need the linear keyframes (I am tracking an object moving at a constant speed and can not have keyframes by changing the speed of my mask.

  Unfortunately, I do not see my keyframes and the follow-up of the lines on the viewer with the mask effect shape the same as I would on a transformation operation. I tried two finger clicking (a MBPro here) on the keyframe in the Inspector, but it doesn't seem to be selectable for nothing but tilt head on and outside. I don't see anywhere in the Viewer to click and adjust the image type (linear/smooth) key on the shape of the mask either.

  

  Any thoughts? I'm on a MBPro 2011 17 "10.11.12 running and FCPX 10.2.2

  Thank you!

  JP

  You can see keyframes in video animation in the timeline Control-V controls.

  

  But unfortunately there is no option to change the interpolation of keyframes. You must use your comments to make a feature request.

  You can also watch TrackX of CoreMelt, which is ideal for what you want to do.