Political diagnosis Service access is denied no Internet
I have Windows 7. My HP laptop took a long time to start and get in line, so I ran a check of the system and tried a system restore to an earlier date. Since I am getting the error message 5, don't not running Diagnostic Policy Service. I tried all the more simple suggestions and it did not work. I can't find my administrator password. A computer technician will be able to fix my internet access? Thank you.
Hi Valerie,
Thanks for the reply.
To avoid a repeat of the troubleshooting steps, I would like to know, which of the troubleshooting steps you have already tried?
This problem can occur when the Trusted Installer account is missing and the permissions for the registry key is refused for 'Diagnostic Policy Service.
Try the troubleshooting steps below and check if they help to resolve the issue.
Method 1:
You can see the article running the Fixit and try the steps for Diagnostic Policy Service solve the problem.
Some services do not start in Windows Vista and Windows 7
Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information, you can view the article:
Method 2:
If the problem persists, you can also temporarily disable third-party security software and firewalls installed on the system and check the issue.
If disabling the security software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.
Note: be sure to enable the security software on the computer after checking the issue.
Hope the helps of information.
Post back with the results of the troubleshooting steps provided. If you need help with Windows, let know us and we will be happy to help you.
Tags: Windows
Similar Questions
-
How can I correct errors of political diagnosis service?
I recently had to restore my computer and now I can not internet. Only, I get a message when I'm trying to diagnose and repair as follows: Network Diagnostics cannot run because the Diagnostics Policy Service is not running.
I tried to start the Service manually Diagnostic strategy and get error 5 access denied message. I also tried to make the disk check and check the sfs to fix the problem. In this, I get a message that says resource protection Windows has found corrupt files but was unable to fix some of them. Then in the next line is said details are included in the convertible bonds. Journal, but I don't know how to access. Please tell me that there is a cure for thisHello
After reinstalling Vista, you need to update the drivers for it.
Go to the website of the manufacturer of the computer > drivers download section > equip your model number > operating system > find the Vista drivers for it, the network adapter, etc. > download and install.
You can't get on the Net, use another computer to go here, download and save them > copy of Flash Drive > transfer and then install them like that.
See you soon.
-
Political diagnosis Service failure
Log name: System
Source: Service Control Manager
Date: 09/08/2016-20:36:50
Event ID: 7000
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: SearchMachine
Description:
The political Service of Diagnostic service failed to start due to the following error:
The account specified for this service is different from the account specified for other services running in the same process.
The event XML:
7000
0
2
0
0
0 x 8080000000000000
118503
System
SearchMachine
Diagnostic policy service
% 1079
Thank you for your response. I rechecked the question that you provided, and I see that you receive an error 1079.
The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.
To help solve the problem, you can run the troubleshooter in Microsoft Fix it . Click on the link below for more information.
We know the result.
Thank you
-
original title: error 5 access denied firewall
Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »
Hi vipin sharmavg,.
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
See the below Microsoft article and try the steps mentioned, check if it helps.
You cannot start the Windows Firewall service in Windows XP SP2
-
Hello
I'm a ControlledAccessException while accessing service book records if the Internet permission DENY on device, why?
Thanks for help.
You can raise this issue in the RIM developer Issue Tracker (Jira): https://www.blackberry.com/jira/secure/Dashboard.jspa
Maybe there is a bug, or maybe an application can bypass permission DENY Internet fiddling with Service book Records...
-
Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)
Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.
Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.
-
Good evening!
About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!
Very respectfully,.
Jay2010Hello
Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
http://WindowsXP.MVPs.org/DHCP.htm----------------------------------------
Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN
You can copy and paste this command, and then press enter
netsh winsock reset catalog
======================
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html----------------------------------------
Try setting all Windows services on their default values.
Start - type in the search box-> find Services at top - right click - RUN AS ADMIN
Vista default services
http://www.blackviper.com/WinVista/servicecfg.htm---------------------------------------
Actually try updating your driver: (use a wire or download on another computer and transfer via)
removable media)Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx---------------------------------------
You can get more help in these forums.
http://social.technet.Microsoft.com/forums/en/category/windowsvistaitproI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Unable to start the service to install under Windows 7, get the error 5 access is denied
THIS PROBLEM IS RESOLVED (PLEASE READ):
There was NOTHING on the internet that has helped me. While I thought, on the permissions, and I thought of my C:\ (main one with what you have).Here's what I did to fix (this applies to all versions on Windows):
(1) right click on C:\ (or E:\ whatever one holds your stuff)
2) go to properties
(3) under Security, click SYSTEM
(4) ensure that the SYSTEM has all the permissions on ALL
NOTE: When you do that on that day will be "cannot give permission to C:\boot (for example)" that's fine, just click continue until it's over
And I'll put the first response as response so that when people search he said answered
=========================================================
I went to Serives.MSC and noticed that my Windows Installer service is not started. When I pressed 'Start' (manual, automatic and automatic (delayed start) to start the service, it said 'error 5 access is denied' I'm an administrator, but it did nothing.)
I tried many thingsI tried 'net user administrator /active' then go to the administrator (the account) and did the same thing, but he did nothing.I tried to make another administrator account, and then did nothing.When I type "net start MSIServer" in command prompt (ran as administrator), but it says "error 5 access is denied."Hello
Thanks for posting the question in the Microsoft Community!
You cannot start the Windows Installer service and get error Error 5 access is denied.
Have you tried to install or uninstall any program?
The problem may occur may be corrupted Windows Installer engine.
I suggest you follow the steps mentioned below
Method 1: Re-save the installation service
a. click Start, type MSIEXEC /Unregister. in the search box and press enter
b. Click Start, type MSIEXEC / REGSERVER in the search box and press on enter.
Method 2: File system (CFS) Scan Checker
SFC scan will find all missing or incorrect system files and repairs them.
See the site:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
Original title: mcshield is a nightmare for me.
McShield is a nightmare for me. Its location is c:\program files\common files\mcafee\ACore\mcshield.
When I try to stop it in services.msc I get the error "could not stop McAfee Amti-Malware Core service on Local computer. Error 5: access is denied. »
I have administrative rights at sign on. How to stop this monster?
http://www.pchell.com/virus/uninstallmcafee.shtml
read this through
If it was me I would uninstall McAfee, it is not highly recommended by someone I know.
Once it is removed, try a free antivirus, I use MSE, but you have to read the instructions first!
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201
Download MSE
http://experts.Windows.com/w/experts_wiki/89.aspx
MSE installation checklist
If you choose to use Mcafee, download autoruns, which shows which takes over at the start and you can disable here.
AUTORUNS
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
Above is autoruns to loadup questions
If you still can't find the entry in the registry, download Autoruns. Let it finish the scanning, then click the Services tab. Find the name of the service 'wrong' in the left column ("Autorun entry"). Right click and select ' go to '. You will go straight to the appropriate entry in the registry for editing.
I would like to examine what you load at startup. You should see if you have any programs from loading during the startup process, which can be changed on request.
With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.When you use Autoruns, you will need to click on the "Connection" tab to see what runs at startup.
-
Hi - I turned on after four days in a row and my pc behaves oddly - have had a process of 12965402:3844684543.exe running in the Manager tasks that I can not close and suspect it is a virus - installed microsoft security but who no longer - the error I get doesn't even exist when I search it - 0 x 80070005. It is said that he cannot start microsoft security services - access denied. Also got a TCPIP error log-when I look it up on top of MS it says that it is to do with the virus and malware etc - when I followed the instructions on that to find the possible culprit, it says that there is the System Idle process - I can't seem to do anything, and now I'm really stuck. any ideas and help someone please? Thank you very much
Hello
If it is necessary to download the programs below on another computer and transfer it to this one
on removable media (such as CD, DVD or USB drives). Rename the .exe programs to
such as MBAM.exe to XXSCAN.COM .com - rename when analysis completed.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be done in Safe Mode - repeatedly, press F8 as you start however, you should also
Run them in regular Windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
RUN - type in the box-
sfc/scannow
Then run checkdisk (chkdsk).
RUN - type in the box-
Chkdsk /f /r
-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
================================
For extreme cases:
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp================================
If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Original title - MESSAGE of ERROR
Hello
I am runnung Windows Vista on my laptop Toshiba A200. As of a few days ago, asking that I try to open a session (I'm the admin), I get an error message saying "the Group Policy Client service does not log. Access is denied. »
I managed to get in the "back door" through my wife and did a system full scan with Norton and Spybot and neither found anything unusual. He asked me to change my user account settings, but of course, because my wife is not the admin, he won't let my do changes.
In addition, some of my software, such as Final draft, also seem to have vaporized.
Help!
Thanks in advance,
Steve Hayward
Hi stevehayward
1. is the computer on a domain?
2. during how long have you had this problem?If the computer is not connected to the domain, you can start in safe mode, and then try to perform a system restore.
Step 1 :
In safe mode; you have access to only the drivers and base files. Check out the link to start the computer in safe mode and then check-
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeStep 2:
You can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To do this, there must be a restore point from the system in which the connection was successful.
Please refer to the below of the help links on performing a system restore.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questionsI hope this helps.
-
Error message "Group policy service has no logon. customer Access is denied. »
Original title: "Group policy client service has no logon. Access is denied. "Error
I have looked at other posts with this same error and followed the steps, but did not have a chance to get to my desktop. I use windows 7 on a z935-P300 of Toshiba Portege SSD if it's relevant.
I use my home computer, I am the only user (admin) and I have no other connection to the user. I did not the latest changes to my computer. I tried the following:
start windows in safe mode - always brings me to the login screen and the same error
Perform a restore of the system to a previous point - no change
has ran Startup Repair - windows can't find nothing wrong
I have access to the command prompt via the advanced startup options in the section to repair your computer, I don't have a boot disk, my laptop with no cd player. I use an iPad to access this site.
Thanks for any help you are able to provide =)
Hi Prandeep,
I ended up calling the Microsoft response service, and they were able to fix my computer. Thank you for your help.
Have a good!
~ Kristina
-
"the Group Policy client service could not denied logon.access '.
user cannot connect to windows, receive the following error message: "the Group Policy client service could not denied logon.access '.
other users can connect to his pc, but it can not connect to any pc in the field. (problem affecting only about the user)
Hi KofiPete,
I suggest you to send your request in the TechNet Forums to improve assistance in this regard. They are experts in your field of investigation and would be in a better position to answer your concerns.
It will be useful.
-
I recently had a weird problem with my Dell Inspiron 1525 under Windows 7 Home Premium. (Which is here: http://bit.ly/rwzCt6). In any case it was resolved to boot from the Windows 7 Edition installation disc Home Premium and do a system restore. When I logged on I was so happy that I wasn't getting the famous black screen with cursor. But now my background is black and bottom right, he says:
Windows 7Build 7601This copy of Windows is not genuineWhenever I open the 'Activate Windows' program, he said only: "an error has occurred." If I click on see details, it is said:Code:0x80070005
Description:Access is denied.I can't use Office, Security Essentials, and it is really annoying that every five minutes it tells me to activate online (which by the way, tells me this):Windows validation has been stopped.
The validation service is unavailable at this time. Please try validation again later.).Anyway, I'd appreciate any help I have buy Windows 7 and Office and I cannot use it properly. Thanks in advance!EDIT:I just got a message saying the following:Windows must be restored
An unauthorized change was made to Windows. You must reinstall or restore Windows system files to activate.
How to reinstlall Windows?What is system restore?
_____| Close |
Also, here is my report of diagnosis:Diagnostic report (1.9.0027.0):-----------------------------------------Validation of Windows data-->
Validation code: 50Code of Validation caching online: 0x0Windows product key: *-* - YVY6H - KWQGK-43CVPThe Windows Product Key hash: hD77W7MCMCNBBclOu3WNr0B4jiI =Windows product ID: 00359-031-8202817-85512Windows product ID type: 5Windows license type: retailThe Windows OS version: 6.1.7601.2.00010300.1.0.003ID: {1C40B657-E0E9-44F8-A29F-82EDBE1CE829} (3)Admin: YesTestCab: 0x0LegitcheckControl ActiveX: registered 1.9.9.1,Signed by: MicrosoftProduct name: Windows 7 Home PremiumArchitecture: 0x00000000Build lab: 7601.win7sp1_gdr.110622 - 1506TTS error:Validation of diagnosis:Resolution state: n/a
Given Vista WgaER-->ThreatID (s): n/a, hr = 0 x 80070002Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->Cached result: n/a, hr = 0 x 80070002File: No.Version: N/a, hr = 0 x 80070002WgaTray.exe signed by: n/a, hr = 0 x 80070002WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->Cached result: n/a, hr = 0 x 80070002Version: N/a, hr = 0 x 80070002OGAExec.exe signed by: n/a, hr = 0 x 80070002OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->Office status: 109 n/aOGA Version: N/a, 0 x 80070002Signed by: n/a, hr = 0 x 80070002Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Data browser-->Proxy settings: N/AUser Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)Default browser: C:\Users\Zach\AppData\Local\Google\Chrome\Application\chrome.exeDownload signed ActiveX controls: fastDownload unsigned ActiveX controls: disabledRun ActiveX controls and plug-ins: allowedInitialize and script ActiveX controls not marked as safe: disabledAllow the Internet Explorer Webbrowser control scripts: disabledActive scripting: allowedRecognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
Other data-->Office details:{1C40B657-E0E9-44F8-A29F-82EDBE1CE829} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 32 *-*-*-*-43CVP 00359-031-8202817-85512 5 S-1-5-21-1948162439-658446731-1811467869 Dell Inc.. Inspiron 1525 Dell Inc.. A16 20081016000000.000000 + 000BA5D3107018400FA 1009 0409 Time(GMT-05:00) Standard is 0 3 DELL M08 109
Content Spsys.log: 0 x 80070002
License data-->C:\Windows\system32\slmgr.vbs(1131, 5) Microsoft VBScript runtime error: permission denied
Windows Activation Technologies-->HrOffline: 0x00000000HrOnline: 0xC004C327Beyond: 0 x 0000000000000000Event timestamp: 11:22:2011 17:28ActiveX: Registered, Version: 7.1.7600.16395The admin service: recorded, Version: 7.1.7600.16395Output beyond bitmask:
--> HWID dataCurrent Hash HWID: OgAAAAEABgABAAIAAAACAAAAAgABAAEAeqhcPoQkwLJsPLbACiVGg2zM7vAGpJT7ovGLyF7kguwqhQ ==
Activation 1.0 data OEM-->N/A
Activation 2.0 data OEM-->BIOS valid for OA 2.0: YesWindows marker version: 0x0OEMID and OEMTableID consistent: YesBIOS information:ACPI Table name OEMID value OEMTableID valueREFERENCE DELL M08 APICFACP DELL M08HPET DELL M08STARTING DELL M08MCFG DELL M08M08 DELL SLICOSFR DELL M08SSDT PmRef CpuPmHmm - what is the error with Development?
The Norton Removal Tool is here...
(I have problems accessing for the moment)
do not worry about the error of wshext.dll - it is not relevant, in my opinion.
Restart, and run another MGADiag - he'll tell us if the re-recordings had no effect.
-
The backup computer fails with the error "access is denied. (0x80070005) »
original title: computer backup failure
My computer will be back up to a point, then will be an error "access is denied. (0x80070005) "at the same time, Microsoft security essentials SAIS it detects a potential threat.
My question is this: if he stops because it detects a corrupted file? or is there an error with a certain application that prevents a full backup?
Hi Cyberwasp35,
· Exactly how are you trying to backup?
· You run the computer as an administrator?
· Have you tried a backup on an external hard drive?
Try the following steps.
Step 1
Perform an online scan to remove the threat detected by the basics of Microsoft security during the backup process
To make online scan click on the link below:
Online analysis of Microsoft security essentials
http://OneCare.live.com/site/en-us/default.htm
Try to disable antivirus software and check if the backup is successful.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Step 2
This error can also occur because the recovery partition is enabled for the file backup or restore of the system and is almost full. To work around this problem, do not select D:\ as a backup source. In addition, go to the System Protection in Control Panel and make sure that D:\ is not activated for restore points.
(1) open the backup and restore by clicking on the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.
2) click change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(3) clear the partition D drive if it is selected, and then try to backup again
Check if the service is stopped or started. Change it to start if it is stopped. The service name is windows backup.
Reply back with the results
Maybe you are looking for
-
How to re - install my HP webcam on my DV-6 1359 WM
I had a virus clear my computer. I lost my Microsoft Works, my Webcam and some other stuff. I buy microsoft works, but whenever I look for my webcam I have a msg to check the path. I don't know what this means. I have Windows 7, 64 bit.
-
What are the temperatures that are acceptable to the GPU and the CPU? I have a CPU E5300 and a processor Nvidia 9500 GT graphics. I only use the GPU for purposes of multi-monitor. I'm writing this, shows 49 oC, EVGA precision with a speed of 70%. PC
-
C460 JBOD - cannot install the OS right...
Hi guys,. First of all, thank you in advance for your comments. I am a worker of cisco. A customer bought UCS C-460 with SSD of 12, 3 TB each. He got no RAID controller, this is just JBOD. I try to install RHEL 7.2 on it, as the user has requested [h
-
Fade in and out between Adobe Muse pages
HelloHow do I create the fade in and fade out effect between pages on Adobe Muse 2015.1 without using widgets.Thank you and good evening.
-
Cannot install Jquery reagent Gallery
I bought (and gained) the appropriate Gallery Jquery app, but cannot download it using the Adobe plug-in. It appears in my modules, but nothing happens when I press on install. I use Dreamweaver CC2015 to Adobe Cloud. 3.4.1.181 on Windows 10.