Portege 3110 boot - hexadecimal error codes

Similar Questions

• What does error code 2149842966 mean?

  What is the meaning can you enlighten me and be more precise... Thank you

  This is the decimal equivalent of the hexadecimal error code 0 x 80240016.

  For Windows Update, it should disappear if you run WIndows Update again. If this is not the case, see:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80240016

  (should work for Vista)

• Get the error Code: 0xc000000d and your PC needs to be repaired.

  * Original title: Error Code: 0xc000000d

  Hello, I have Windows 8, and at random, I had projected blue and the computer reset and now I have this message on my computer when I try to start it

  Your PC needs to be repaired

  The Boot Configuration data file is missing some required information

  File: \Boot\BCD
  Error code: 0xc000000d

  You will need to use the tools of recovery on your support of instillation. f you do not have any media (such as a disc or usb device) please contact your system administrator device

  I can't pass this screen please help. The only disc that came with this computer is a reinstallation DVD.

  Hello

  Please follow the steps mentioned here and see if they help you:

  http://www.kapilarya.com/fix-the-boot-configuration-data-file-is-missing-some-required-information

  Hope this helps, good luck :)

• Error Code 10 Intel 82579LM LAN connection on Portege R830 - 13 c

  After the recent update 32-bit Windows 7, the connection to the local network cannot start (Code 10) in Device Manager

  "This device cannot start. (Code 10) »

  I tried to uninstall drivers / back / and install which follows Toshiba support page files, but does not solve the problem.

  lan-20110330164846
  brahim-20110331130330

  How Intel 82579LM Gigabit on Portege 830-13 C of working network connection?

  (wireless is fine)

  Hello

  Error code 10 is generated when the Device Manager cannot start the hardware device and usually its caused by obsolete or corrupt drivers.
  So I think that the driver installation should help solve this problem.

  I would recommend this as:

  -Go to Device Manager and uninstall the driver LAN
  -Restart the laptop but don t install the driver
  -Install the CCleaner and clean the registry
  -Restart the computer once more
  -Then go to Device Manager, select the network card (Ethernet controller) and install the downloaded driver

  As an option, I would recommend test page of Intel LAN driver.

• HP Envy 17: 0xc0000225 error code won't BOOT HP ENVY 17

  Trying to turn on, get the Error Message:

  0xc0000225 error code

  Your PC could not start properly

  The NEW blue screen of death!

  The computer was loaded just a few Microsoft updates last night before stopping.

  10 64-bit Windows

  Where do we go from here?

  The error code and the situation are not addressed by Microsoft and hours of work-around so did not work.  Recovery disk was ineffective as a myriad of Internet solutions.

  I had to buy a CD of Windows 10 for $150, and enter the BIOS to boot from the CD Ms.  Once I had the opening screen, I selected "REPAIR".  2.5 HOURS later, I was back to and all running programs.

  MS scammed me once again... Thank you Bill Gates!

  SDJL THANKS for the reply.

• In Safari, I get the error code BSO D 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.

  In Safari, I get the error code BSOD 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.

  You have utilities installed on the computer antivirus, cleanup, or other third party maintenance?

• Blue Screen: Error Code C0000218(Registry File Failure) I have NO recovery disk, boot disk, etc. What can I do?

  I have a desktop HP that I installed a new hard drive on Windows XP Home Edition Service Pack 3. He has been working very well. But, the other day, I took out my DVD ROM and try it switched with different DVD - ROM, and when I restarted my computer, I got the "blue screen error Code: C0000218 (registry file failure)." The registry cannot load the HIVE (file). \System ROOT-SYSTEM 32-CONFIG-SOFTWARE or its log or alternate. It is damaged, missing, or not accessible in writing. "So, back to my main issue, I guess. How can I fiw it without any sort of disk recovery or boot disk etc... I know I could probably go buy some sort of recovery software, but can't afford it right now. Can someone help me, please?

  You have all the Norton/Symantec products installed and if so, do you know which ones and versions?

  You start with a chkdsk/r from the XP Recovery Console.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• I replaced my motherboard, now Vista will not boot. I can not install either (error code 0 x 8007002)

  I changed my motherboard and now my Windows Vista SP2 does not start.

  I have downloaded and burned a boot from Windows Vista DVD from microsoft.com and I tried to install it but I get a message "this installation has been cancelled. The dialog box shows

  «Windows cannot open the required file D:\Sources\Install.wim...» "Error code: 0 x 8007002.

  Help please?

  "arielca" wrote in message News: * e-mail address is removed from the privacy * .com...

  I changed my motherboard and now my Windows Vista SP2 does not start.

  I have downloaded and burned a boot from Windows Vista DVD from microsoft.com and I tried to install it but I get a message "this installation has been cancelled. The dialog box shows

  «Windows cannot open the required file D:\Sources\Install.wim...» "Error code: 0 x 8007002.

  Help please?

  If your computer has an OEM version (supplied with the computer) of Windows Vista, it is linked to the original motherboard and when you replaced the motherboard the license becomes invalid.  The only exception is if the original motherboard been replaced by or with the approval of the OEM (computer manufacturer) due to a failed motherboard and an exact match is not available.  It would then the OEM manufacturer to provide a license appropriate for the computer.

• Received error BSOD, ran Diagnostics, got the error code 2000-0146, tried to boot from different HARD drive, got the same stop error message

  So my friend gave me his computer dell laptop. The thing would boot normally for a few days until he would give me a blue screen of death with the "UNMOUNTABLE_BOOT_VOLUME" message constantly to not even upward. I ran the diagnostics and got the error code 2000-0146. What I've read, this code error means that the HARD drive is bad and must be replaced. So, to make sure that it's the hard drive, tried to boot from an old hard drive, I got around the installation by USB and windows gave me the same stop error message. May - so that means it's a motherboard problem?

  No, it isn't - unless the operating system was installed on this drive AND the system in question, that it won't work as a bootable drive.

  Unplug the system, remove or disconnect the battery and hold the power for 30 seconds approximately.  Turn on and re-run the diagnostic tests - if the same error appears again, the drive is bad.  Replace it.

• Error code = Ox496 after the boot failure

  I recently met a boot failure and after starting "repair" I was informed that:

  Verifying the integrity of system files and repair

  Result: failed.  Error code = Ox496.

  Please how can I deal with this problem.

  OS: Windows 7 Home Premium.

  Thank you

  Curiousroblin

  See if the answer in this thread helps:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-files-integrity-check-and-repair-failed/51b0cc28-16ed-4C75-95AC-a11a13b22a85

• The boot configuration data file is missing some required information, error code: 0xc000000d

  Original title: question of recovery of Windows 8

  I have a Toshiba laptop with windows 8.  and this morning when I tried to turn it on, it's the message that is displayed:

   

  "RECOVERY".

  your PC needs to be repaired

  The boot configuration data file is missing some required information

   

  File \BCD

  Error code: 0xc000000d

  
  you will need to use the tools of recovery on your installation media. "If you, etc.".

   

  There is no USB or CV came with the laptop.  It is automatically installed when I first turned on.

   

  I was looking at a trip to this topic last night and everything was perfect, now, this morning, I get this message.

   

  I restarted the computer a few things, but this message is still there.

   

  My question is how can I get my laptop to work again, because I can't go in the computer to change the settings or options.

   

  Help, please

   

  Thank you

  Winnie

  Hello

  We are here to help.

  You can perform the troubleshooting steps below:

  Option 1: Windows startup parameters in the Windows recovery environment .

  • Windows recovery environment, enter in safe mode. After you have successfully loaded in safe mode, perform the clean boot.

  Option 2: restore your PC to an earlier point in time .

  1. Enter in the right edge of the screen and then click on Search.
  2. Enter the Control Panel in the search box, and then tap or click Control Panel.
  3. Enter the collection in the control panel search box, and then tap or click recovery.
  4. Press or click open system restore, and then follow the instructions.

  Let us know how it goes.
  

• The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034.

  I just bought my ASUS laptop (with no dvd player) 3 days ago. Today I turned on for the first time and was usually up to 1 hour later this bluescreen poped out: RECOVERY, your PC needs to be repaired. The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034. You will need to use the tools for restore on your installation media. If you don't have any media of the instalation (such as a disc or USB device), contact your system administrator or the PC manufacturer... As I said before that my laptop came with Windows 8, and it is not a dvd player.

  Thank you.

  Remove the power supply and remove the battery

  Press and hold the power button for 60 seconds

  Apply the AC voltage ONLY (DO NOT INSTALL THE BATTERY)

  Click on the power button and more quickly, press F9

  Follow the instructions to reset the computer to factory default

• I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8. It is a Tablet dual boot. I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code.

  I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8.  It is a Tablet dual boot.  I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code.  I have tactile and available USB.  Any help would be appreciated!  Also, once I get Windows running again how do I start to Android?  This option is missing.

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem may be due to a corrupt or damaged files in the system partition or boot record that are required for Windows 8.1 start successfully. You may need to run the automatic repair of Windows 8.1.

  However, I would recommend at this point, contact the manufacturer of the Tablet for the best support possible, since you use dualboot.

  Please respond to this topic, after you talk with the manufacturer so that we can continue to research the issue and help you accordingly.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Portege R100 stoped working - the power LED flashes error codes

  I have a R100 that has suddenly stopped working.
  The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.

  That - what it means, and where can I get a list of all codes error?

  I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.

  I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?

  Thanks in advance.

  Hello

  I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.

  In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
  Here it s only a user to user forum and I have never seen anyone from Toshiba again.

  Anyway, here you can search for the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!