Portege 3480CT shows only 500 MHz instead of 600 MHz

Similar Questions

• Qosmio G30-10 b: BIOS shows only 3328 MB instead of 4 GB of memory

  I've updated by laptop 4 GB of memory. The reports correctly that 4096 MB in the BIOS screen. When you start however it shows only as 3328 MB and that's obviously what Vista reports. (I know that 32-bit Windows systems probably will not see any memory, but probably checking the BIOS boot should display correctly).

  Last update of the BIOS was done - running on v3.50

  Post edited by: gerhards

  If the BIOS recognizes all 4 MB of memory, so I don't think it could have a bad influence on the performance of the laptop.
  As you already suggested the whole 4 MB can be recognized by the operating system 32-bit Windows due to the limitation of the system.

  Recommend checking this Toshiba document:
  http://support.toshiba-tro.de/KB0/TSB7601WE0007R01.htm

  Please check the part called "(detailed) resolution:
  I put the memory 2x2gb bars in my computer laptop and the BIOS and the operating system is worth about 3 GB
  So BIOS might watch also a value of bad memory

• Satellite L30 PSL33E shows only 896 MB instead of 1024 MB

  I bought a PSL33E with 512 MB of memory. I upgraded to 1024Mo by adding a second SAMSUNG 512 MB, exactly equal to the original. Instead of 1024 MB, it displays only 896 MB. What is the reason for this difference?

  Is something related to the video memory, 128 MB, or can I have a problem in the computer? I removed the memory and it shows 448MB, boths memories and in both slots.

  Hello

  You have a shared memory graphics card?

  The actions of graphics memory shared the part of main memory and, therefore, the main memory does not show the full 1024Mo.

  It seems that the difference of 128 MB (1024 MB - 896 MB = 128 MB) is used by the graphics card.
  It's nothing wrong and nothing wrong. So don t worry buddy. Everything looks ok ;)

  Greetings

• Update IOS Sierra shows only 8 GB instead of 16 GB

  After the upgrade to my system Sierra shows that 8GB instead of 16 GB in which I have two installed RAM 8 GB cards.

  Ive done a reset of the NVRAM/PRAM memory and no help.

  Does anyone else have this problem?

  

  I would try reinstalling the memory in Bank 1. I doubt that Sierra has nothing to do with it, just a coincidence I guess. I've not seen anyone else with this issue since Sierra was released.

• Satellite Pro A200 - shows only 3 GB instead of 4 GB of RAM

  Hello

  2 years ago I had a Satellite Pro A200 as a professional laptop and it works with XP SP2, later with SP3. With 2 GB, it shows 2 GB memory in Windows - and I know it's a Radeon 7500 with 256 MB memory graphics individual, and there is no shared memory.

  I upgraded to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and ATI system monitor shows 4 GB. I know that 4 GB is not possible under XP 32-bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems, I've seen values between 3.3 and 3.7 GB.

  So, where's the memory? It looks like a bug - the chips of memory have two 2 GB I checked this. Because it's a company laptop I can not just switch to 64-bit XP :-(

  There's no option in the BIOS - first I thought that it is the graphics card, but mine has independent graphics with own memory so that the computer comes up with MB 2048 or 4096 after the upgrade.

  Shared memory would show about 1900 MB of RAM for the operating system as my private EEEpc.

  Hi shadowmaster_1,

  > I know that 4 GB is not possible under XP 32 bit
  Then why do you ask this question here if you already know? Moreover, it s not a limitation in XP, it s a material limitation on all 32-bit systems

  > only on Windows 2003 R2 32 bit or Vista
  And who says that Windows 2003 or Vista can use 4 GB? Okay, there's an update for Vista where 4 GB correct displayed in system properties, but that doesn't make no difference. Vista 32 bit peut t use all of 4GB, it s only cosmetic improvements! ;)

  > So where is memory?
  Memory is installed on your computer, but can t be used complelty with a 32 bit OS.

  At the end of the story: If you want to use 4 GB, you need to install a 64 bit OS. On all the 32 bit OS, you can use only upward to ~3.2GB RAM!

• Tecra M10 - Diagnostic mode shows only 3 GB instead of 4 GB of RAM

  Hello

  I have 2 Tecra M10-133 and M10J. In both cases, the system BIOS shows 4 GB (4096 MB) memory total. When I activate the Diagnostic Mode (Enable) and restart the system, this shows the following:

  3072MB MEMORY CHECK 1 OK
  3072MB MEMORY CHECK 2 OK
  3072MB MEMORY CHECK 3 OK
  3072MB MEMORY CHECK 4 OK

  Some body knows the reason why does not not the 4096MB of RAM?

  Thank you very much..!

  Hello

  I'm not very well why the diagnosis Mode shows same 3072MB 4 GB are inserted m but what value of memory is reported by the Windows operating system?
  Windows recognizes the full 4 GB of RAM?

  I should mention that only 64-bit OS can use and recognize the full 4 GB of RAM.
  The 32 bit OS will recognize as the 3.2 GB

  The other thing is that the graphics card uses part of the RAM, but generally, this should not affect the Diagnostic Mode.

  However, check your BIOS version and if more recent BIOS was released, then I recommend you to update.

• my 1 TB hard drive shows only 500 GB size

  I recently had to use this backup to another PC hard drive hard drive is only 500GB, so when the imaged system it I lost the other 500GB, I guess that. I have strength to know that he was going to take the space like that or I would not have done to this PC. When I reinstalled windows and reformat the disk, it recognizes that the 500. I even went in disk management and other programs to try to unlock the other and watch her do not back up.

  Any thoughts on how to retrieve other that find a system of 1 to copy image and load on this pc?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that 500 GB of space on your disk to 1 TB is not present even after formatting. We will try the following methods and check.

  Method 1:

  
  Step 1: Check if the problem occurs in safe mode:

  Please refer to: , start your computer in safe mode

  Step 2: If the problem does not occur in safe mode, then you can perform a clean boot and check.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 3.

  Method 2: This issue could be due to malicious programs in the system, so you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• list of archive logs show only 1 location instead of 2

  Friends...
  OS: OEL 5.5 64-bit
  DB: 11g R2 (11.2.0.3) 64-bit
  I put 2 destination to archive. Log_archive_dest_1 = / u01/archive1 and log_archive_dest_2 under/u01/archive2.
  When I do this...

  SQL> archive log list
  Database log mode              Archive Mode
  Automatic archival             Enabled
  Archive destination            /u01/archive2/
  Oldest online log sequence     8
  Next log sequence to archive   10
  Current log sequence           10

  at the same time, when I do this...

  SQL> select dest_name,status,destination from v$archive_dest;
  
  DEST_NAME                                          STATUS                                             DESTINATION
  -------------------------------------------------- -------------------------------------------------- --------------------------------------------------
  LOG_ARCHIVE_DEST_1                                 VALID                                              /u01/archive1/
  LOG_ARCHIVE_DEST_2                                 VALID                                              /u01/archive2/

  Why list archives logs showing that one location whereas the query indicates both the location. and why list of newspapers of record showing instead of archive1 archive2?
  
  Thank you

  The LIST of NEWSPAPERS of ARCHIVES control gives a quick overview of the State of archive, it clearly should not be used to report on destinations.

  The ARCHIVE_DEST view $ V gives a clear view into where on the disk are these destinations and when you use the LOG_ARCHIVE_DEST_n parameter, is closely related to what has been entered in the file init.ora parameters

  Maybe this might help you http://www.databasejournal.com/features/oracle/article.php/3867646/Oracle-Database-Archive-Logging---Where-are-my-archive-logs.htm

• Satellite A200-1AE shows only 3 GB instead of 4 GB of RAM

  First of all the http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm * Help *.
  (Come on security start-Control Panel of configuration-system-configuration-boot system Administrative Tools - Advanced options, make sure the maximum memory of the option is not checked. If it is checked, uncheck, press on apply, Ok and restart). -* not working *.

  I've got BIOS, Windows 7 64 bit v1.4
  BIOS see 3 GB (BIOS available on the toshiba Web site is for win XP and Vista only)
  Windows 7 see 4 GB but 3 GB usable

  Please help, thanks.

  Satellite A200-1AE (http://ce.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?LNG=20&service=CE&BV_Us eBVCookie = yes & PRODUCT_ID = 127556)

  Hello

  to be honest, this problem is one of the most annoying problem as the failure of Bios in this forum.

  > BIOS see 3 GB (BIOS available on the toshiba Web site is for win XP and Vista only)

  I think that problem is in the Bios, it does not recognize the 4 GB, but only 3 GB.

• My tab page shows only 6 tabs instead of 9

  The gear in the top right won't let me hide the new tab page, not to set parameters, as it says on the help page.

  Hello

  With the new update of Firefox, the number of tiles is now determined on the size of the screen - if zoom you or enlarge the window, you can have several tiles appear.

  If you want to set a fixed number of tiles, I believe you can do it with the following extensions:

  • https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-tools/

• Oracle BI 11. Analysis report shows only 500 lines per Page

  How can I extend the Maximum lines per Page for an answer on Oracle BI 11.

  Hi user,

  Set the parameter to Pivot Table and charts parent in instanceconfig.xml file section,

  
  
  

  
  1000
  5000
  25
  30
  
  
  300
  1000
  5000
  25
  30
  
  
  2000
  1000
  2000
  25
  4096
  
  
  

  * Make a backup of instanceconfig.xml file before making the above change

  Rgds,
  DpKa

• X 1 carbon i7 showing only 4 processors in Device Manager

  I just bought 4 X 1 carbon i7 and I noticed that the Manager device (Windows 7 64 bit) shows only 4 processors instead of 8.  My HP desktop computers, which are also i7, show 8 (4 physical cores, 4 cores, Hyperthreaded) processors.  The X 1 bios shows hyperthreading is enabled and the msconfig file does not limit the number of cores.  No idea how to re-enable the missing processors?

  Hello

  I just took a glance at the expedition of Tabukand the only X 1 options carbon i7 I see are dual-core:

  Processor Intel Core i7-3667U (2 hearts, 2.0 GHz, 4 MB cache), Intel HD Graphics 4000,
  (Up to 1600 MHz) DDR3 memory controller, Intel Turbo Boost 2.0 (3.20 GHz), HT technology

  There may be a quad-core option, but I'm not.  What is your type of machine (for example 1234-xyz)?

  Z

• hard drive 500 GB shows only 150gbs.

  I have installed a new hard drive for SSHD 500GH and partitioned to install Ubuntu or Linux Mint, but later decided that I didn't want to install Linux. I tried to delete the partition, but it wouldn't let me, so I got 150GBs of space on my back.

  How can I recover the other 350GBs of storage?

  Here are the screenshots.

  

  Thank you in advance.

  If you have created a Linux partition on the disk, then you need to use Linux to remove it. Disk utility can not handle partitions and disks in Linux. The images you provided don't make much sense. It shows a 500 GB disc with almost 90% of accounting for 150 GB, while the rest of the drive is only 4 GBs. clearly there is a problem. You can use GParted under Linux to restore the disk on a partition full size. Set the drive is formatted using the MBR and FAT32. The OS X utility, disk utility, can read/write this format in order to be able then to re partition using the GUID and format the drive using Mac OS Extended journaled.

• Pavilion 500-246: GB of ram it shows only GB why usable?

  I have a Pavilion of 500-246 with 8 GB of ram it shows only 7.18 usable - PLEASE HELP.

  I also try to install a GeForce 8400 GS with 1024 MB ddr3 pci-e 2.0 and cannot operate. If I plug into the video card and that you start the computer NOTHING on the screen at all. S ' PLEASE HELP.

  Hello:

  The memory problem you reported is normal.

  Part of memory has been reserved for some devices of system such as the integrated graphics card.

  The issue of the video card does not...

  I see the product that your PC came with factory-installed W8.1.

  In order to get a video card no HP to work, you need to change 2 settings of the BIOS before installing your video on any PC card that came with W8 or newer version of the factory.

  See this link to change the BIOS settings.

  http://support.HP.com/us-en/document/c03653200/

  Also before you install your video card, you must uninstall the graphics card in Device Manager, check the box uninstall driver, stop, disconnect the PC and install your video card.

  You can do this after you change the BIOS settings.

• CF 10 mistakes show Error 500 instead of normal error message

  Hello

  Strangely, our CF 10 Server started to show a "500 - internal server error" every time that happens a CF error, rather than the normal error message. The error is saved, but the front-end server shows the 500 error and nothing else. Normally, see us the error message and trace the stack etc.

  How to solve that?

  EDIT: This is a CF10 on Server IIS 8 Windows 2012, with updated 11.

  Kind regards

  Mark

  Post edited by: Tribble

  If you had previously childless, that is, you would see the ColdFusion message and stack trace of the error, not the generic screen for IIS, and then all of a sudden the generic IIS 500 error started showing, my guess would be that your web.config file has replaced either by a global change or another local change.  I don't know how you'd put in place before, but if you want to completely ignore the standard IIS 500 error msg and use your own ColdFusion integrated error (or simply to see the ColdFusion "grey area") then you must have this line somewhere in your Web.config, like this:

  There is an entire thread on this topic here: http://forums.adobe.com/message/5388861

  This applies to 404 and 500 handling.  Not sure how IIS 8 differs from 7.5, but I think that these concepts are similar.  I hope I understand your problem correctly.  I've dealt with all of this, during the passage of CF9 on IIS 6 to CF10 on IIS 7.5.