Portege 3500 Tablet OS restore

Similar Questions

• Portege 3500: upgrading WiFi 802.11 g

  Hello

  I have a Toshiba Portege 3500 Tablet of 1.3 ghz. It comes with 802. 11 b WIFI configuration. I was told it take a MINI PCI card. Anyone know if I can switch to 802.11 g... If If have a URL

  What about Jazz

  Hello

  One of my friends has done and it works perfectly. He told me that he used the mini of Agere PCI Wireless card.

  Good bye

• Need of German recovery CD for Portege 3500

  Hello I'm looking for the Portege 3500 tablet pc recovery CD... Because mine are missing and the helpdesk told me that they do not have these CDs more :-(

  I want the German version of area. Money should not be the problem...

  I also have a legal Windows XP Tablet serial number, because I m a universitity student @msdnaa...
  My only problem is that I don't have the recovery CD...
  My system is already running, due to the installation of windows via pxe, but partitioning is not this beautiful :-) due to the installation of BACK...

  I m really looking forward to your response!

  Hello

  I kindly may I ask which service center contacted you´ve? You called a sort of hotline Toshiba or you request authorized service partner in your country?

  You can try this service partner which is in Bavaria and served with some very good service:
  http://www.IME.de/

  If they allow couldn t you can go in the global ASP Locator on the toshiba site and look for another. Usually the ASP should be able to serve with some recovery in General...

  Welcome them

• CD-ROM for Portege 3500 recovery does not work!

  I have a Portege 3500 tablet pc and the recovery cd does not work.
  I followed the instructions but nothing happened to my windows again!
  Can you tell me please how can I get my phone?
  Thank you

  Hello

  AFAIK the Portege 3500 dose does not support internal CD/DVD players.
  Have you used an external hard drive that is compatible and supported for boot from the CD?

• Need to restore disk for Portege M200 tablet pc

  Dear all,

  I need a copy of the disk original restoration for a Portege M200 Tablet pc.
  Just found out that Toshiba does not sell these disc more. (?!)
  Too old... I'm in trouble!

  Can someone help me please? Anyone got one?

  I tried ebay but without success for me.

  Thanks in advance.

  An owner of desparate M200 in Holland.

  Hello

  This is a really silly situation. I have no such media, but maybe you should contact the nearest authorized service provider. Maybe they have this CD.
  I put t have much experience with the tablet PC, but up to what you expect you should try installing WXP Professional and all offered drivers Toshiba, tools and utilities.

• Portege 3500 will not start on PCMCIA - tablet PC 2005 installation

  Hello
  Sorry for my English, I'm french
  I want to reinstall a tablet PC 2005 Edition.
  I have a portege 3500 with CDROM PCMCIA reader.
  Tablet PC does not start on PCMCIA...

  Help me
  TKS

  Hello

  I found a very interesting document of the FAQ on the Toshiba site:
  Procedure of product recovery and Bootdisk (FD) for the Portege 3500 Series.
  http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm

  It should help you get started on the PCMCIA drive.

  In any case, this theme has been discussed a lot of time here in the forum.
  Please check other threads:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5926
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15336&MessageID=55939

  Give us a feedback if you succeeded.

• Portege 3500 - problems pcmcia

  Hello
  I bought a reader of external cd for my portege 3500.
  This is the original toshiba drive (connectet via a pcmcia 32-bit card and bootable)
  I run WindowsXP Tablett Edition on the tablet.

  When I plug the device in the slot pcmcia, nothing happens. (Windows Device Manager indicates also nothing new)
  Should I have all the drivers to use pcmcia devices or do I have to change something in the bios?

  The reader is 100% working, I tested it with another laptop.

  Hope you can help me
  Leon

  Look in the BIOS for a setting that allows you to switch between <->CardBus PCMCIA mode.

  Ensure that the slots are running ok in Device Manager.

  You have another PCCard you can test in the laptop?

  It is possible that the pins inside the PCMCIA slot can be bent or broken. Look in the slot with a torch and make sure that all the stems are straight.

• Portege 3500 - change HARD drive and deal with overheating CPU

  I recently bought a Portege 3500 without any support of discs etc. It doesn't have a CD or a floppy disk. It has 2 problems, I want to trouble.
  (a) HARD drive is obviously out because it is by clicking on me, and it presents a permanent red section during defragmentation.
  (b) the fans are at full power all the time, and the CPU is running slowly.

  (a) I had a new HARD drive that I reformatted on other laptops. I put a base Windows XP on this HARD drive and uploaded on my external that I attach to the Portege. I used "transfer... Assistant "to transfer files, folders, and settings to the new HARD drive but I don't know how to install the old Windows XP OS Tablet it." I have the product key of Microsoft for the operating system. Any suggestions would be helpful.

  (b) I believe that the transfer of heat from the CPU on the radiator is a failure, causing the processor to hot and therefore slows down. I already solved the same problem with a Dell by coating the top of the CPU with Artic Silver 5 paste. I cannot, however to get the CPU in the same Portege so I removed all the screws down. Does anyone know how to split the case without causing damage?

  Hello

  (a) Unfortunately, but I don t really know how you want to install the operating system without using the recovery CD or the windows CD.
  I searched a bit in this forum and found these messages on the installation of the OS on the Portege 3500:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5926
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15336&MessageID=55939

  See also this FAQ:
  http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm

  (b) on the Portégé, you should find the power saver utility. This utility allows you to change the different modes of cooling and processing speed.
  In my opinion, you should also check if the fans are clean. Especially the dust and debris inside of the laptop is responsible for cooling not properly of the CPU and other parts.

  But if you want to know how to remove the covers so I would recommend checking this site. Maybe you'll find something useful.
  http://tech.irisvista.com/laptops/Toshiba4010/portege4010_1.htm

• Question about the Installation of Windows XP on Portege 3500 home

  I have a second hand Portege 3500 with WXP tablet 2005 Server Pack 2 market version, but without the original disks. However, recently had a virus that did something to Prime the area on the hard disk. I have removed the virus but now get unexpected core dumps memory and system restarts when you try to connect to the internet.

  Question: can I go down a level and safely install ordinary WXP software to work around the problem or the acquisition of new version of WXP Tablet and reinstall the software to circumvent the problem of core dump?

  Installation of an operating system on this laptop, it's the hardest thing I have ever tried to do. Once start you, you will notice that there is no device boot attached to this pc. To install windows, yourself, the only options are to buy the cdrom drive for this laptop toshiba external or install via a network.

  The toshiba cdrom drive is now quite obsolete, more expensive and the external device only that the laptop starts from (I tried with the other external cdroms, DVDs, disks usb keys and hard). It seems extremely difficult to boot from lan unless you already manage it infrastructure of the company. It is possible in theory, but after 3 weeks I still hadn't thought about her.

  My solution at the end of the day was to send it to my local toshiba support center and ask them to re - install for me (he happened to have one in stock toshiba cdrom burners). I got the installation cd, so I guess you will need get these images from toshiba as well (or buy another os).

  Good luck!

• Wireless driver is not install on Portege 3500

  Tosh Portege 3500 with ' Toshiba wireless lan mini pci card.
  XP SP2 tablet Edition

  I want to upgrade the driver of 7.43.0.9 to the new site 7.63.0.9 (because I need WPA security)

  The process seems to be okay, I chose wlags48.inf, several copied files, BUT in the end, I get the message
  An error occurred during the installation of this device
  Access is denied

  I can go back to the old driver tbhe without problem

  I tried to disable the adapter and even turn it off with the switch

  I tried to do the upgrade mode safe

  Anyone has any suggestions please?

  Steve

  Hello Steve

  I'm really skeptical about WPA security, but maybe you can relate more after installing the driver successfully. Download driver driver and extract it to the new folder created somewhere on the desktop. When you start the driver installation please choose the advanced option and navigate in that order.

  As far as I know you should not choose anything just browse in the right folder. Please try again.

• How to boot from Portege 3500 - instructions

  I discovered far from starting form Toshiba Portege 3500 and laptop now mt work.
  Email me [email protected] for help

  Hello

  Thanks for the offer, but it will be nice if you can post your instructions here.
  A lot of people read this forum and this is the right place to post some useful instructions.

  Good bye

• Need drivers for Toshiba Portege 3500

  Hi I m new to the forum.

  I have the problem. I can't find t on Toshiba support drivers and utilities for this model, where can I find all this kind of software (console, saving etc..)?

  Hello!

  First of all, welcome in the forum!

  Have you searched the Web from Toshiba site? You will find all the drivers who need you for this model.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  * Archive *-Portege-online Portege 3xxx-online Portege 3500 online

  Good bye

• Installation of WXP on Portege 3500

  It is a question of a person can suffer idiots like me!
  A friend gave me a Portege 3500 without a HARD drive.
  I have one but have no manual. Looked on the Toshiba site but does not tell me how to access BIOS which is obviously a problem.

  3500 has no floppy or the HARD disk drive if the 3500 will recognize the external USB drive with disk to install XP in it? (if I can change the boot sequence?
  Do I need to burn discs of startuop XP and buy a floppy drive?
  I would be grateful if someone who can take me through the steps to get this up and running. I have a PC to burn aging if necessary.

  Thank you very much,.
  Martin to the: [email protected]

  Hello

  The fact is that not all external CD/DVD drives are supported for the start.
  You need an individual. As far as I know the compatible is a PX1055E-1NST.
  But this device only comes with a 32-bit cardbus card. This card will be recognized only in the Windows operating system.
  You need a 16-bit cardbus card. The Bios can recognize this card and you can boot from the external drive.

  Note: The pc card controller option must be set to automatic selection or CCIP compatible.

• Portege 3500 - common module installation does not work

  I have a Portege 3500, I downloaded the good common module for this model I decompress a common model, click setup.exe and nothing is happen

  I think Kouros with hourglass and nothing no configuration.

  Hello

  I checked the page European of Toshiba and found protégé 3500 common Modules for deposited XP edition version 5.04.00TE

  All must be downloaded first, then extract it and then run the setup.exe file.

  In many cases you won't see anything on the screen because the complete procedure of installation is running in the background.
  However, I recommend to download again, unzip properly, and then repeat the installation.

  Good bye

• Re: Portege 3500 - part of RTC CMOS battery repalcement not.

  Hello

  My Toshiba Portege 3500 RTC CMOS battery is low as constantly lose the BIOS settings but not its standard CMOS batt then what part of repalcement don't.
  Should I use the same party as an another Toshiba laptop I can find on eBay?

  I don't want to pay £30 for a mattress of 50 p.
  Thank you

  I really wonder that you are not Google. Google says that you should use the P000331520 part number. Check it out and confirm if it is the right.