Portege 7220 - memory not recognized

Similar Questions

• Portege 7220 does not recognize the Extension of memory (Kingston)

  Hello

  Recently, I wanted to update my old notebook, Portege 7220 with a 256 MB Stick of Kingston Ram. According to their website, it should work, but the machine does not recognize the memory at all. (just using internal 64 MB).

  I can't upgrade the Bios either, because when I press F12 when the computer starts, it cannot read the floppy drive in the docking station. Do I need a USB floppy drive for that? I tried with a usb key, but it does not work. is there a possibility to redo an update of windows? (Comp running Windows 2000)

  Thanks for your help, much apprechiated.

  Rawnonymous

  > I can't upgrade the Bios either, because when I press F12 when the computer starts, it cannot read the floppy drive in the docking station. Do I need a USB floppy drive for that? I tried with a USB but that doesn't work. Isn't there a possibility to do a windows update? (Comp running Windows 2000)

  Only the TRAD of the BIOS version exists for this Portege.
  This means that you will not be able to update the Windows operating system running, but you will need an external floppy drive to perform these updates.

  Regarding your problem of memory;
  Check this box:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5388&ft=m&St=3

  You can find the compatible memory module. It s a PC100 144 pin SODIMM.

  Maybe you used the not-entirely-compatible module or the module is defective

• Tecra M3 (PTM30E) - new module of memory not recognized

  Hello

  I have a Tecra M3 PTM30E 09X01LEN and am trying to upgrade the memory - addition to the 512 MB, it came with.

  I bought an upgrade memory of 1 GB Toshiba - PC2-4300 DDR2-553 and tried to install it in the housing B (leaving the original card where he was). As far as I know I've followed the instructions in the manual (which is pretty poor, since it is just of the drawings), but the new memory is not recognized.

  What can I do else?

  Hello

  Strange but perhaps your new RAM module is defective or the second memory location.

  Have you tried the new memory module in the first place?
  What happens if you put the original 512 MB module in the second slot? The module is recognized?

  Check it!

• Satellite L500 - second module of memory not recognized

  Have installed 2 GB Offtek extra memory in 2nd slot of memory, but it is not recognized by the system--still show only 2 GB installed memory.

  What is the problem?

  Hey,.

  I've never heard of RAM modules Offtek

  From my own experience, I can say that work really well Kingston memory module and never had a problem with them, they are of high quality modules.

  In my opinion, you should try a different RAM module. Maybe it s is not compatible, so it will not be recognized that s my personal opinion.

• The SanDisk Ultra Plus 64 GB sdxc card memory not recognized by PC even if PC shows these letters to front

  SanDisk memory card Ultra Plus sdxc 64 GB not recognized by PC even if PC shows these letters on the front of the hard drive. From time to time I can get it to recognize the memory card but mostly not. Then I manually to the top of my camera (Canon T3i) onto the PC and make my photos to the PC camera is very heavy! Does anyone have this problem? I can't find anything online that answers my question. TYIA solution to anyone.

  Simple solution is to buy one of these small memory card readers.  Costs about $5.  Plug the memory card on it.  Plug it into a USB port.

  If still not recognized, the memory card must be reformatted or replaced.

• Portege 7220 will not start

  Hello

  Can anyone help?
  My Portege 7220 Wona? t recognize the CD-rom drive in the docking station. The hard drive has been erased completely before I bought it with no recovery disk.
  Any suggestions or comments would be useful.

  Hello

  Hello

  I found an IDE driver lying on the Toshiba driver page.
  Scope of the IDE Controller Driver Toshiba V1.01.01

  Supported features:
  (1) DMA33 Mode2 ultra / MWu DMA Mode2
  (2) CD/DVD-ROM LAN Docker Hot Docking

  But as San Remo said check the page and choose the drivers for your operating system.

• Compaq Presario SR5010NX: One of the two locations of memory not recognized / work

  Had already upgraded RAM from 512 to 1 GB.  In an attempt to level again with a 2nd (identical to the first) 1 GB DDR2 DIMMS, I discovered that the 2nd module of memory was not being recognized.  I also tried with success the new! G in the first taken.  Specification to support up to 2 GB with 1 GB DDR2 DIMMS in each shot. However, "no beeps" and not "start with anything in the second taken.   I also tried two 256 KB RAM modules and as the two 1Gs only the a 256 KB has been recognized.

  I also tried to boot with a module in the 2nd outlet only and found that my system wouldn't start.  Any suggestion would be appreciated.

  C001uS

  Thanks again for your response.  I went not the CMOS battery. However, your answer made me look on a possible revision of the BIOS through HP customer care.  I downloaded the version of BIOS the same but with a more recent date.

  After download and install I shut down my computer, insert the 2nd module of 1 G and made a new shoe.

  Happiness is a system of 2 GB Dual Channel now running.

  PROBLEM SOLVED

• External memory not recognized

  Hello world

  I just want to clarify that I have read the previous posts on this and I'm still having a problem.  I just bought the "rocket" yesterday (07/04/09)

  Windows XP does not see my external memory chip.  I was back to the MTP to MSC.  While MSC, XP sees the "rocket" as a removable device with 4 GB of storage and DPW acknowledges as a "peripheral" (with a nice icon... lol) with 4 GB of storage.  In addition, WMP11 sees either Mode exactly the same way as the Windows one.

  The problem is that I bought two external memory chips and none appear anywhere (desktop or WMP11).  I have a PNY MicroSd (4 GB) and a PNY MicroSD (8 GB).  Also, just to be sure... the chip is loaded with plated connectors facing the back of the unit, correct?

  There is not yet any sync'd up music is not a matter of loading the MSC music and other music in MTP mode.  My firmware version is 01.01.07A.  I understand there's a 01.01.22. to update out now, but I don't him have not yet downloaded.

  Help, please!

  ~ Rich

  I had a lot of trouble when I had my initial microsdhc card. Make sure it is recessed in the case of the rocket, you fell with a click. When you eject it it will be as a button that is depressed when he is in a position, when you go to put it up (or disable) you feel he's going or down a little bit more before coming without the locking mechanism.

  Additionally, make sure that the cards are in the format. SDHC, it is recommended that FAT32 is used, see:

  http://Panasonic.jp/support/global/CS/SD/download/sd_formatter.html

• Memory not recognized for computer laptop dv5020

  Laptop older specifies 2 GB max memory, but when I install 2 GB (1 x 1 modules) it will only recognize 1 GB.  A scanner memory shows one of the RAM slots is empty even when I swap modules.  I was wondering if there was a configuration switch that I would need to change if she recognizes the two slots?  Both are full, but we show that it is empty.

  The system is 64 bit AMD running XP Home edition with Service Pack 3.

  Hello

  Remove 1 of your memory modules and check if it is recognized in slot 1 and slot 2 - try also with just one module of memory.  Each single module is recognized in each slot?

  It might be useful to reset the default settings of the bios as follows.

  Judgment of the laptop.  Tap here to f10 as soon as you start Notepad to open the menu of the bios.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• upgrade memory not recognized

  I have a pavilion dv6405ca that came with 2 512 memory sticks. I replaced them with 2 1gig sticks and all thing as before, but the computer works is still only 1 ram total concert. The bios won't let me change anything, but the date and time and memory remapping is not on the menu.  the operating system is vista Home premium.

  Oh... I have flashed the bios to f.42 f.43. no problems, but the machine is still unaware of the increased ram.

  RESOLVED the 2nd slot was not properly seated new stick. The old man sat down with a problem, but the new ram RAM has not quite contact (about 8 times in a row!). I finally noticed and made a misguided pushing and he sat and I have my complete 2gig. Thank you for you time and effort.

• Pavilion p6280t: ram memory not recognized

  I have 6 GB memory ram installed in p6280t (2 GB x 3 sites).  Only 2 GB is displayed in windows and BIOS.  I tried to replace the sticks of memory in slots - no luck.  I have upgraded to the latest version of the BIOS - still shows only 2 GB.  All three memory sticks are the same part # Kingston.  Any idea what the problem can come and how to fix it?

  Thank you

  I found 2 memory locations that work.  I put a 2 GB stick in each of them and now show 4 GB of memory, as well in the BIOS and windows. Locations of memory #2 and #3 seem to be bad.  I decided against buying and installing a new mobo - too expensive and the computer is 5 years.  My computer works acceptable with 4 GB.  Any failure of a major component in the future, I'll scrap computer and buy a new desktop computer.

  Thank you all for your help and your suggestions.

• EliteBook 8540w - memory not recognized

  Hello

  I bought a refurbished 8540w i7 M620 with 4 GB of memory. The 2x2gb are both installed, but only 2 GB are shown under 'My computer', and the system Bios information.

  I guess I have a bad memory module, or there is a setting in Bios that I can't find the memory dual channel configuration.

  Any help is appreciated. I have 2 x 4 GB I would install, for as much as I can get both channels to work. When I installed the 2 x 4 GB, windows crashed during the splash screen.

  Thank you!

  PJ

  Thank you, Mario.

• Memory not recognized

  I have 8 gig of ram and am running vista 32, which it does not recognize.  How can I switch to a 64-bit system without having to reload all my programs?  I have Vista 64 or am willing to go to Windows 7 if necessary.  Thank you.

  Hello

  32-bit to 64-bit is not a upgrade path in any Windows operating system

  to switch from 32-bit vista to vista 64-bit, you must do a clean install with a license of vista full 64-bit

• EliteBook 8540w memory not recognized in windows 8.1

  I've updated the memory in my notebook with 2 x 4 GB. Windows 8 told me: installed memory: 12 GB (3.93 GB usable).

  the bios sees all the 12 GB of memory

  Slot #1
  Type DDR3
  Size 2048 MB
  Manufacturer Samsung
  Band bandwidth Max PC3-10700 (667 MHz)
  Part number M471B5673EH1-CH9
  {Information} order number
  Week/year 20 / 10
  SPD ext.    EPP

  Slot #2

  Type DDR3
  Size 2048 MB
  Manufacturer Samsung
  Band bandwidth Max PC3-10700 (667 MHz)
  Part number M471B5673EH1-CH9
  {Information} order number
  Week/year 20 / 10
  SPD ext.    EPP

  slot #3

  Type DDR3
  Size 4096 MB
  Kingston manufacturer
  Band bandwidth Max PC3-10700 (667 MHz)
  Part number 9905428 - 043.A01G
  {Information} order number
  Week/year 27 / 11
  SPD ext.    EPP

  Slot #4
  Type DDR3
  Size 4096 MB
  Kingston manufacturer
  Band bandwidth Max PC3-10700 (667 MHz)
  Part number 9905428 - 043.A01G
  {Information} order number
  Week/year 27 / 11
  SPD ext.    EPP

  any person who those what can be wrong?

  Thank you

  solved the problem in Exchange for memory, moved from 2 x 4 slot 1 a 2, moved the 2 x 2 to slot 3 and 4.

  I hope this info will help someone someday.

• upgrade memory - not recognized by vm

  I have a virtual Red Hat machine that had 3 GB of memory. I stopped, upgraded the memory to 4 GB. After I have reboot and run a free - m, he sees more than 3 GB. Is there anything else I need to do?

  Thank you

  Scott

  You need to use a PAE kernel. Use your up2date or else find and install.