Portege M100: USB mouse is crazy

Similar Questions

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye

• Problems with USB mouse

  Hello

  I've seen similar reports listed who are about a year or so old at this point.  I wanted to post my question, as is currently the case.  I have a HP Pavilion DV7 with Windows 7 and a processor Intel Core i7-2670QM CPU @ 2.20 GHz, Mhz, 4 Lossnay 2201, 8 logical processors and 4 GB of RAM.  I use an external mouse (I don't like trackpads) and my mouse keeps a malfunction.  It will seem like it disappears from the screen in any way endangered and take about 15 or 20 seconds to return it will also block on the screen and not move and other times it will not move in the right direction.  Sometimes she will go from one side of the screen and change from an arrow to a glove.  This is happening with the wired mouse and wireless and no matter what brand is the mouse.  I did some research online and there was a response on a forum of HP who seem to speak exactly to my problem where the HP employee advised the person to update their BIOS, so I was having no impact on the problem.  I also completely keep up-to-date with all the updates from Microsoft.  It's driving me crazy because I use my laptop a lot.  One last thing - I still have to find forums with this problem which had a solution.

  Any suggestion would be appreciated.

  Original title: external USB mouse keeps locking

  Hello

  Did you do changes on the computer before the show?

  I wish that you read the following article and follow the suggestions in the article.

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-CA/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Logitech USB mouse does not work after the upgrade to Windows 7

  I have a HP Pavilion DV6XXX laptop computer series (MS Vista Home Premium has been loaded from the factory), recently updated with Windows 7 Home Premium.  It is then this problem began.

  Wherever I am, everything I do (typing, surfing, reading) my cursor made a break of about 3 seconds, 26-28 seconds.  This interruption is making me crazy!  Everything what I'm typing, the cursor becomes unavailable for 3 seconds.  Everything I typed is gone.

  My laptop has a touchpad, but I use a Logitech USB mouse.  I can't disable my touchpad, but that does not change.  In addition, it is matter if I type or not: my cursor disappears for 3 seconds, 26-28 seconds.  I can sit and watch it.  I have disabled the touchpad, unplugged the USB mouse, find the updated HP drivers and Synaptics to nothing does not.

  Looking for other suggestions.

  Original title: cursor refreshes frequently

  Hello

   
  Thanks for posting your query in Microsoft Community.
   

  I understand that you have problems using the mouse effectively on Windows 7 computer.

  (1) what is the Logitech mouse model number?

   

  In the meantime, please follow the following suggestions to solve the problem.

   

  Method 1: Try to put your system in a clean boot state, which helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Referring to "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after troubleshooting.

  Method 2: You can follow the link and identify and correct the mouse, touchpad and keyboard problems in Windows.

   
  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows
   

  Method 3: If the above does not help then, try to get the latest drivers installed for the mouse and see if that helps.

   
  Support

  http://www.Logitech.com/en-us/support

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
   
  Thank you

• Trackpad and usb mouse stop temporarily when the power adapter is connected

  It is a very weird, crazy question. It began to happen today.

  Introduction: I installed ubuntu since 2008 in this laptop from version 8, now I installed 11.04. My brother has the same problem since a month there is around. It has the same model of laptop (DV9000 HP), but Windows Vista computer.

  The problem: mouse freeze random by 1 or 2 seconds, the two mouse pad and usb mouse attached. When I unplug the AC adapter, mouse works well immediately.

  Indices: I forgot my adapter in my apartment this week, and I got my brother to work here (the House of my parents). And another hint, I used a power adapter for cars, today give it a 19, 7V instead 18, original 5V AC adapter. My brother also use this car adapter.

  Hey, try to get the other original AC adapter. My laptop has become normal when I got my power adapter. See me first post

• Tecra S11 with BIOS 3.50 - USB mouse is not recognized at startup

  Hello

  I installed the latest version of the BIOS in my TECRA S11 - U10, and now my "HID" device does not-that is to say my dongled USB wireless mouse. I must now remove the dongle and re - insert before the TECRA sees the mouse.
  Boring, just about usable, but it's a PITA and I'm aware of always 'making/breaking' the USB connection.

  Must be something to do with the BIOS and see devices HID on "start"?
  Finally, I enabled Legacy USB in the BIOS device support, but still no joy. In addition, have tested the mouse on other laptops - works well at the start, so NOT the mouse.

  Suggestions, people? Thank you...

  Hello

  Disconnect your USB mouse and go to Device Manager.
  Remove all USB hubs and USB controllers in Device Manager list.
  Reboot the laptop.
  Wait until all the USB ports have recognised and installed again.
  Then connect the USB mouse and check how it works.

  You should also test different USB ports available on this laptop.

• A keyboard for a Portege S100 will work in a Portege M100?

  Quick question - a keyboard for a Portege S100 will work in a Portege M100?

  Page layout looks like. Although a different color.

  Hello

  I think that you can not use the same keyboard as the Portege S100 supports the year-easy-to-use 84 keys (US) or 85-keyboard (UK) and the Portege M100 supports the year-easy-to-use 85/86-keyboard.
  In addition, the S100 connector supports the keyboard interface 34 CN3230 pins and the M100 supports PJ3230 34pin keyboard connector.

  So maybe this could be a problem.
  I recommend using the original keyboards published for each laptop model.

• Portege M100 - video player does not work

  Can anyone help?
  Had to rebuild my beloved Portege M100, after a hard disk failure.
  Everything works well except the video player.

  Tried using Windows Media Player and Intervideo Win DVD, but the two close as soon as the video starts.
  WMP has said that this is a problem with a codec called ivivideo forming Intervideo and Corel as they are now.

  However, their site is less useful and I can't find a way to update.

  Suggestions anyone?

  Hello

  Try VLC Player.
  It s small tool/player which can be downloaded for free.
  It plays most files smoothly.

  In addition, you could install some packages of codec as K-Lite codec pack

  Good luck

• Portege M100 BIOS supports more than 128 GB of HARD drive?

  subj

  Portege m100 BIOS does support HDD > 128 (137) Go?

  What IDE controller has been integrated?
  You could install a tool of diagnosis of equipment as Everest home edition and could check your hardware specifications.

  But I guess the protégé M100 supports South Bridge Intel ICH4 - M and the IDE controller must support the Ultra ATA 100/66/33

  However, you must still install these diagnostic tools to ensure a what IDE controller has been installed.

  The fact is that since ATA - 6 (also known as Ultra DMA/100, Ultra DMA 5 or Ultra-ATA100 mode) the 48-bit LBA is supported which allows to use more large 128 GB drives

  Good bye

• Portege M100 problems

  I recently had to return my laptop to get a defective hard drive replaced and have found it difficult to re - install all drivers for W2K. I don't hold any recovery CD.

  After installing W2K, Manager of devices has about 11 items requiring pilots (and a single unknown device). I installed these drivers on the Toshiba site for this model but could not do any support to see if they were to be installed in any particular order. Device Manager now seems to be correct, but I still have problems with the Modem (Toshiba Software Modem). The diagnostics tab reports that the modem could not open a port.

  Only COM1 and LPT1 appear under Ports in the Device Manager.

  Any ideas?

  Hello Bing,

  Sett you up a new system without a recovery CD, you need to install the drivers and tools in the correct order.

  Here is the list:

  9.0 DirectX v9.0
  Patch to fix vulnerabilities "Java Applet" Q329077
  Security patch "A buffer uncontrolled in the HTML Help" Q323255
  Fix to "support the authentication of 802. 1 x on computers' Q313664
  Fix for Q328523 "Withdrawal starting by default to IE of CIF"
  Fix for Q329112 ' DVD extra feature of writing. "
  Fix for Q810090 "Transfer speed decreasing with USB2.0 after sleep"
  Fix for "Taking up the issue of hibernation for USB mouse" Q814484
  Fix for Internet Explore 6 Service Pack 1 Q810847
  Fix for "A buffer uncontrolled in the Service Locator" Q810833
  Intel Chipset Software Installation Utility V4.30.1006
  V6.00.05 TOSHIBA common modules
  SoundMAX Integrated Digital Audio V5.12.01.3600update (signed)
  Intel (r) 82852/82855 GM/GME Graphics Controller V6.13.10.3514
  TOSHIBA Power Saver V4.17.03
  Utilities TOSHIBA V4.20.02
  TOSHIBA Extension3 Mobile V3.37.00
  TOSHIBA ConfigFree V2.00.14
  Intel(r) PRO/100 VE Network Connection V6.4.14
  Internal wireless V1.02GM LAN driver
  LAN wireless internal utility V1.03
  Microsoft Windows (r) 2000 USB 2.0 Driver V5.1.2600.0
  Hotkey wireless V2.0.0.3
  TOSHIBA Software Modem SM2122ALD05 / SM31116ALD5
  SMSC IrCC - Fast Infrared V5.1.2500.0b Port
  Windows Media Player 9 V9.00.00.2980
  TOSHIBA Skins for Windows Media Player V1.00.1121
  TOSHIBA V3.02.02(Common-V4.xx) Console
  TOSHIBA V3.00.0100 controls
  SD Card Driver Set V2.0.4
  Format card memory SD TOSHIBA V2.0.0
  Bluetooth Stack for Windows by Toshiba V2.01.01
  TOSHIBA display device utility change V1.0.0.1
  TOSHIBA Hotkey utility for display V1.00.01.00 - 02
  InterVideo WinDVD V4.0Build11.96
  Drag ' n Drop CD + DVD V3.00.259
  Driver DVD-RAM V3.0.8.0 software
  TOSHIBA Management Console Final OME V3.0.2
  The TOSHIBA user manual

  Theo Bye

• Portege M100 - none of the drivers work

  None of the Vista drivers work for Windows 7, so I switched to XP Professional and always SOME drivers don't work?

  Is there a special way to install after installing Windows?

  see you soon

  Hi ollie,.

  It would be interesting to know what you mean with none of the drivers work. You get an error message or what is exactly happening?

  Regarding the issue of Windows 7 I think that it of normal that Vista drivers do not work for Windows 7 because the Portege M100 is very old notebook, so I doubt that Windows 7 will work on this subject.

  Moreover, the Toshiba site, you will find an installation instructions document. Use this list a driver installation order is recommended.
  Check this box!

• Portege M100 - need driver ethernet

  Hello!

  I need driver for my laptop ethernet. It's the Portege M100.
  I have download all the drivers from the drivers download, but still ethernet does not work.

  Thank you!!!

  What you mean with network does not work?
  Brands you yellow in Device Manager?
  Can connect you to a network?
  Please explain this more accurate.

  Did you download the driver here?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  It would also be interesting what OS you have.

• Portege M100 - no audio output device

  I recently acquired a Portege M100 1.2 ghz model no PPM1DE-0000Y-EN. The hard drive had been cleaned, so I installed Windows XP with Service Pack 3. I don't have a utility Toshiba and driver CD.

  For the moment, my main problem is that there is no sound and I get messages of "no audio output device. I can watch a DVD but once again his silence as the internal speakers do not work. I am a novice, so if you have any tips please try to not do not technical but in simple terms that I can understand. There are probably a number of questions that I haven't discovered yet IE Power Saver, etc. without wire.

  I think you're missing the SOUNDMAX program to render sounds. At least that's what I had with my M200, but apparently M100 and M200 are quite similar. Installed SOUNDMAX SE will solve the problem. The easiest way is probably to get a sort of utility CD.

  And it's probably the only one too. Even if make you it work without, you always end up without the other Toshiba Utilities (which can be quite crucial, as power saving, ability to use the buttons and the FN keys, possibility to use the touchpad, etc..).

• Portege M100 PPM10A-0008GP & PPM10A-09E6M has the same motherboard?

  Portege M100 PPM10A-0008GP & PPM10A-09E6M has the same motherboard?

  Thank you very much!!!

  Portege M100 PPM10A-09E6M seems to confirm this hardware configuration:
  Intel Pentium M 1.3 GHz LV
  Graphics Controller Intel 855GM
  RAM 512 MB (installed) / 2 GB (max) - DDR SDRAM - PC2100 - 266 MHz
  Hard drive 80 GB

  The Portege M100 PPM10A-0008GP seems to support the Intel Pentium M 1.2 GHz, 256 MB and 60 GB HARD drive.

  But it seems that the motherboard must be the same.

• Portege M100 stop when unplug the a/c adapter - battery problem

  Hi people,

  Laptop for my wife, it's a Portege M100 3 or 4 years, which is seems a good machine, although the hard drive failed and had to be replaced recently.
  However, there is also a problem with the battery charging.

  The machine works very well when connected to AC power whether the battery is or not, but as soon as you remove the power cable it stops working immediately, it is to say everything, including the fan stops immediately.

  The sign of the battery on the top edge of the screen/cover blinking orange.
  I figured it was the battery that had given up and bought an another toshiba (IE not a compatible but the real thing) and he slotted in but still.

  This problem above the hard drive has been changed also.

  Any thoughts or ideas?
  Thank you very much

  > The sign of the battery on the top edge of the screen/cover blinking orange
  Are you sure that it is a LED battery?
  AFAIK the battery LED indicates the State of charge of the battery.
  Green: charging completely charged and orange way. But in both cases the LED does not flash/blink.
  Only the power adapter LED will Flash orange if feeding malfunctions and the voltage is abnormal.

  But if the battery LED flashes then I guess this code refers to the battery failure.
  You should always buy a battery recommended by Toshiba and not other 3rd party products.
  The manufacturer of the HARD drive is not important, but if the battery is dead so you can buy one that is part supported by Toshiba