Portege M200 detects not in tablet mode

Similar Questions

• Portege M200 does not detect the Modem PCMCIA card

  I have the Portege M200, when I insert a PCMCIA card (LAN or wireless) the pc detects it ok but if I insert a modem PCMCIA ANY, as a standard 56 k modem, modem card v620 air verizon or a sierra wireless aircard 710, the pc does not detect any, nothing happens when I put it in or out.

  V620 Verizon is the card that I have to make it work as soon as POSSIBLE, others, I used for the test, it seems that modems do not work for some reason any on the PCMCIA.

  any help?

  If the WLAN card manufacturer supplied driver with this card please read manual how to install it on the right track. It is possible that the driver must be installed first.

  Sorry, but my opinion on the laptop PCMCIA port is OK and if you need support try to contact the manufacturer of the card. They should have enough experience with own products.

• Portege M700 - spin button does not not in Tablet Mode

  I have a Portege M700 and the spin button does more work when I turn in tablet mode.
  It works when it in portable mode.

  I have the rotation utility of going to secondary landscape and its switching is more and the button on the front of the screen won't it be more.
  I can go into the rotation software and turn it manually.

  Any suggestions on how to get the button works again?

  Oh and I'm under Vista business with SP 2.

  Any help would be appreciated.

  If you rotate the portable unit, the screen automatically rotates using the accelerometer?

• Portege M200 does not start

  I have a Toshiba Portege M200 with Microsoft Windows XP Tablet Edition. When I turn on the computer, I get the following message is displayed:

  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit Intel Boot Agent
  Insert system disk in drive.
  Press a key when you are ready.

  When I insert the recovery and Applications/drivers DVD Portege M200 Series, the same message will reappear.

  What is my next step?

  Thank you.

  This message appears only if the safe portable couldn t of the other sources and tries to boot from LAN.

  The question is; Why the Portege M200 doesn't boot from the HARD drive?
  In my opinion, there are two possibilities; There is no OS on the HARD drive or the HARD drive died.

  I think that this should be checked first

• Keyboard yoga 900 arise does not in Tablet Mode

  I've had settings and devices and clicked on the box I was supposed to click on.

  In TABLET mode, when I touch the Google to enter text inside bar, the keyboard does not appear, so I have to manually launch the keyboard then when I finished I have to manually close the keyboard because there is no button 'DONE' or 'GO' or 'ENTER' on the keyboard in tablet mode.

  Thank you for your suggestions.

  I'm afraid that the resolution of this problem lies with Google. The Chrome browser does not trigger local keyboard in tablet mode. It is a desktop application that does not use the API of Windows 10 news for this feature. Personally, I doubt that Google will rush to remedy this.

  As you have discovered, Microsoft Edge brings up the local keyboard in tablet mode. IE11 goes.

• Dell coming Pro 8 with 10 Windows, all of a sudden not in tablet mode on-screen keyboard

  Yesterday it worked.  -Although I'm worried I'm headed on a bad road for the last month, I started to have to hold the power button about 5 seconds to turn it on.   I upgraded from Windows 8 to 10 Windows on this tablet more than 6 months, in August 2015.

  This new problem is that when I'm in tablet mode and use an application non-tablette as the browser Chrome, the on-screen keyboard fails to materialize when I type an entry field.  The same thing happens when I use another Windows program which is a map file.  But he can't, it's that the on-screen keyboard is launched even in tablet mode, when using Office programs such as Word or Excel or Microsoft browser instead of Chrome Edge.

  If I manually switch non-tablette mode, on-screen keyboard doesn't show when I type an entry, either field, but at least I put in place so that the keyboard icon appears in the taskbar in non-tablette mode.  So I can choose the keyboard from there I can enter data into the search field of the browser.

  This used to work, up until yesterday, while without having to manually switch off the table mode, I could choose the browser from Google app from the START screen, he'd jump open on the screen and when I typed an entry field research, the on-screen keyboard will be launched automatically.

  Hi, I had the same problem and found a way around - hold - click the lower panel until a small window with 4 options of additional icons will appear. One of the options is 'See the keyboard key' - check it.

  In case that the keyboard does not appear in Chrome automatically, you can fill it with this button.

  It will be useful.

  Miro

• on the screen buttons not working not not in tablet mode

  I have a S10 - 3T and have recently filed to windows 7 Home premium. After the upgrade in tablet mode buttons on natural for touch screen only works in landscape and not in the other 3 positions.

  We know the fix this.

  Allan

  I reinstalled Natual Touch and turn off the PC Tablet mode, everything works now.

  Thank you for your help.

  Allan

• revolve 810 will not in tablet mode

  I have a HP revolve 810 G1 which won't in tablet mode.   Someone at - it ideas why this would be or if it's just a setting that should be adjusted?

  Thanks for your reply, but the problem seems to be updates BIOS F.47 day & 8.1 of Windows that have been installed.  I found some messages from users having the same problem and when I went down the BIOS to version F.44, when everything started to work.  I hope HP fixes this problem with the next update of the BIOS.

• Portege M200 will not install product recovery.

  Hello.

  I have a laptop Toshiba Portege M200 (model No.: PPM20A-00LG4). Three years ago, that I ran the recovery of products and records program to get a new install of XP Pro. Then I loaded all service packs of the internet. Very well, everything worked fine and the perfermed the laptop.

  Recently, the laptop was quite slow, so I decided to do it again.

  I booted the laptop on the program of recovery on the external CD-ROM drive. He reformatted the HARD drive, etc. I then installed the product recovery CD four amount requested by the installation on screen menu and the laptop seemed to accept them. Then, when invited to "Remove the disk from the drive and press a key" the laptop restarts but does is display a white blinking cursor against a black screen, for hours. Nothing happens.

  After pressing a button to restart, the Toshiba flash appears with different sources of boot, the HARD drive is first, then just the blinking cursor. I tried to re - start the laptop but get the same routine and then the blinking cursor.

  I'd appreciate really no clue to the diagnosis.

  Thanks in advance for any help.

  Hey,.

  The blinking cursor means that the operating system can t be started. To me it sounds like that, something was wrong during the installation of Windows.

  I recommend reinstalling Windows if more boot of the Toshiba Recovery disk and follow the instructions on the screen. In other words, do the same steps that you have already done and check what happens.

  Such things as installation doesn t work properly can occur without any particular reason. So, don t you worry and just test it again. ;)

• Portege M200: the screen is blank when you switch to Tablet mode

  Hello.

  Have a problem with my Portege M200 and after hours of searching for a solution, I'm still at a complete loss as to how to fix it.

  Essentially, when you attempt to switch to Tablet mode - or if I press the button cover closed 'sensor' on the far right, which is essentially the same thing: the screen goes black.

  This means that I can not in tablet mode at all.

  What happens across multiple operating systems and will happen even before that an operating system has started. Of course, I checked that when in Windows, the option "When I close the lid" is set to do nothing and I even checked for any cable setting in bios but saw nothing relevant.

  As far as I know this has only started happening since I sent it for repair with toshiba a month or two back (motherboard has been replaced I think).

  No way to control it via software or am I'm going to have to send it for repair again?

  > Like as far as I know that this has only started happening since I sent for repair with Toshiba a couple months back (motherboard has been replaced I think). Anyway to control this via software or am I'm going to have to send it for repair again?

  You description, it looks more like a hardware problem as a problem of software because this happens before an operating system has started. That's why I would exclude a software problem.

  In your case I would recommend you to contact the ASP again and explain the whole situation with your laptop.

  Good luck

• Portege M200: serial port does not work with port replicator

  Hello
  I have a Tablet m200 and the top mentioned dock/replication PA3314-1PRP port.
  As the M200 has no serial port (rs232), I want to use the one on the docking station, but it is not recognized as a device on my tablet.

  Thew network connections and usb ports all work fine and the lpt port is shown in Device Manager. I have restored the Tablet and it still does not recognize the serial port.
  How can I get this port recognized so that I can use it.

  Thank you very much
  Lee

  Hello Lee

  I just, I can confirm that when you use the Replicator port advanced III with Portege M200 several ports do not work. Problem is that Portege M200 does not support these interfaces.

  This is a technical limitation and the port of mouse PS/2 port keyboard PS/2, serial port, I.Link (Firewire) port and DVI port will not be supported when Portege M200 is anchored on the Advanced Port Replicator III. :(

• Portege M200 - Toshiba start screen appears and then nothing

  My Portege M200 does not start.

  Turn it on and toshiba start screen appears and remains like that. Nothing works (or F2 to enter the BIOS)

  Any ideas?

  Hey,.

  To me, it looks like hat it is a certain hardware for computers problem stops at the screen of the Toshiba BIOS...

  It's really hard to say what could be the reason

  First of all, you must follow the instructions in this article and maybe it helps:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Portege Z20t-C-121 screen does not automatically turn into tablet mode

  Hello

  We bought a Portege Z20t-C-121 to test as a replacement for some of our leaders. I have built with Windows 10 company and installed all the drivers latest on the Toshiba site. A WiFi Intel driver did not work properly so I downloaded and installed from the Intel Web site.

  The only thing that I can't work seems to be the automatic rotation of the screen; When I dock the screen to use as a Windows Tablet detects this and goes into tablet mode, but however I turn the screen remains in the same landscape as it was when it was docked.

  Name of the operating system: Microsoft Windows Enterprise 10
  OS version: 10.0.10586 n/a build 10586

  Can someone tell me what I need to do to get this feature works please?

  Have you installed the drivers Win8 or Win10?

  Have you installed the driver system of Toshiba and Toshiba system settings?

• Portege M200: registering does not voice when you use the handwriting recognition

  When I'm in "tablet mode" using handwriting text recognition that my Portege M200 regularly presents a message to say, he could not save the speech recognition and I have to switch off the microphone if I do not use it. I often use it to take notes of the meeting so there is always background noise. Usually, text is lost when this message appears. The message will also appear when I save.

  How to turn off the microphone while maintaining the functional handwriting recognition please?

  Just a question: what software do you use for text recognition?

• M200 & Multidock II the external display orientaion is upside in tablet mode

  With the Portege M200 and II Mutidock I wanted to log in and use an external monitor, so I could use the M200 to draw/write on Tablet mode everything glancing outside, but little matter I try in screen orientation, one of the screens is backwards is not usable.
  It's a feature announced, so I expect there's a way to guide the tablet screen a way while still getting the external monitor to display vertical position?
  Thank you

  Hello

  The resolution of this problem is actually very simple. Go to display properties. Then click on the last tab on the right, and then click Advanced. Change the settings for the "second monitor" to "extend my Windows desktop on this monitor. This should fix the problem of the display 2nd upside down. Have a great day.