on the screen buttons not working not not in tablet mode

Similar Questions

• Portege M200: the screen is blank when you switch to Tablet mode

  Hello.

  Have a problem with my Portege M200 and after hours of searching for a solution, I'm still at a complete loss as to how to fix it.

  Essentially, when you attempt to switch to Tablet mode - or if I press the button cover closed 'sensor' on the far right, which is essentially the same thing: the screen goes black.

  This means that I can not in tablet mode at all.

  What happens across multiple operating systems and will happen even before that an operating system has started. Of course, I checked that when in Windows, the option "When I close the lid" is set to do nothing and I even checked for any cable setting in bios but saw nothing relevant.

  As far as I know this has only started happening since I sent it for repair with toshiba a month or two back (motherboard has been replaced I think).

  No way to control it via software or am I'm going to have to send it for repair again?

  > Like as far as I know that this has only started happening since I sent for repair with Toshiba a couple months back (motherboard has been replaced I think). Anyway to control this via software or am I'm going to have to send it for repair again?

  You description, it looks more like a hardware problem as a problem of software because this happens before an operating system has started. That's why I would exclude a software problem.

  In your case I would recommend you to contact the ASP again and explain the whole situation with your laptop.

  Good luck

• Portege M200 detects not in tablet mode

  I just got my M200 return of warranty repair, where it had its motherboard replaced. He seems to have acquired the accelerometer utilities and functionality of motion detection, which either were not there or I wasn't aware of before (he had a clean rebuild several times, and I was never invited to calibrate this utility). However, it seems more to be able to detect its current mode of operation - that is, it is no longer the screen automatically rotates when I switch to Tablet mode, and when I put features such as Tablet Access Code to work in tablet mode, they don't work at all no matter what mode.

  Also, I just checked the power settings, and nothing happens when the lid is closed, regardless of the setting here. The machine continues to operate, and I see that the backlight is always on, shining out of the closed case.

  It seems to me as they neglected to connect the lid close button, which I guess would be she realizes how it went in tablet mode, as well as when to turn off the backlight etc. for a lid close. I tried pressing the cover independently close button and nothing happens. I suspect it's going to be an another money-back guarantee, but nobody knows what I might be missing?

  Can someone advise?

  Hello Tim

  On your device, there are too many different problems, and it must be checked properly. I know that you may want to solve the easier way, but I believe that without service partner there is no much to do. Please contact them and ask for complete verification.

  They should use the factory settings and test everything, especially compressed usage mode.

• The screen backlight not working anymore on Satellite M

  Hello

  I have a problem with my laptop screen. The backlight of the screen does not work no matter how suspect more and I switch that turns off the screen when I close my laptop is broken.

  When I press the power button and release, a fast and light the backlight flash can be noticed.
  Does anyone have a solution for this so I can fix it myself?

  Thanks in advance, Stephan

  Hello

  I wouldn't recommend trying to fix it yourself if you n t have any experience with the laptop repair and do not be angry with me, but it seems that you don t have this experience
  In this case contact a technician and explain the problem

• 4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• How do synchronize you a phone if the screen does not work?

  How do synchronize you a phone if the screen does not work?

  Rstansbury wrote:

  How do synchronize you a phone if the screen does not work?

  You need solve the problem first otherwise you do not have.

• Satellite L300 - 1-5 - the screen does not work

  Recently, I encountered a problem with my laptop, the screen does not work.
  I tested my inverter of the screen and my backlight lamp to see that if that was the problem, but they both worked perfectly, I then tried the entire screen with the parts and that worked too. (I tried in my friends Toshiba Satellite L300 - 217)

  Then I looked around online and got told to try to connect my laptop to an external monitor, so I did and the screen didn't work there either. So now I'm stuck, I have tried everything even made sure all connections aren't loose etc but it still does not.

  Anyone know what the problem with my laptop?

  Thank you, Tom

  Hey Buddy,

  > connect my laptop to an external monitor, so I did and the screen didn't work there either.
  This means that the internal monitor is ok and the reason must be the graphics card or card mother herself.

  I guess for now, you get only a screen empty and nothing happens on your laptop?

  In this case, you should contact the closest service provider authorized in your country. Just get in touch with the guys and ask for help. They can check the cell phone and fix it! ;)

• Keys (Fn + F6 and F7) function to set the brightness of the screen does not work

  original title: Fn + F6 and F7 to adjust the brightness of the screen does not

  The function Fn + F6 or F7 has suddenly stopped working. It has been fine until now, but when I press on them now, nothing happens. I use a toshiba laptop with windows xp, can provide more information if necessary

  Thank you

  Hello

  1 have had any changes made to your computer before this problem?

  2. What is the number of the model of the computer?

  3. the other function keys work as should.

  Perform the steps mentioned below and check:

  Step 1:

  Check if the problem persists when the computer is in clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Make sure that you put the computer to Start Normal once you have finished by referring to step 7 in the article.

  Step 2:

  I suggest you perform the steps mentioned below and check if it helps:

  http://forums.Toshiba.com/T5/keyboards-touchpads/fn-key-not-working/TD-p/253131

  (Valid for all models of Toshiba laptops)

  If the problem persists I suggest you to contact Toshiba to get help:

  http://Toshiba.com/Tai/support.jsp

  Let us know if it helps.

• ease of access on the keyboard of the screen does not work?

  My easy access on the keyboard of the screen does not work. I have easy access to the centre and left click on the keyboard of the screen then nothing. I double click, then nothing. I'm using a head pointer and live the clicker. I can access the touch keyboard, but it doesn't have the function or alt etc. keys. Can I download the easy access on the keyboard of the screen and reinstall?

  Thanks for the reply. He started working now. Very strang. Well.

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help!

  I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help! I've tried everything. Google it. Searched through itunes, etc. It MUST be a bug, because it started right after I accepted the 12.3.3 update on my laptop running Windows 7 32.

  I count on the part of the main screen, which is not. Its strange. PLEASE HELP ME! In addition to the main page of the Itunes Store, everything else works fine as before. Music from my library work screens, etc.

  I also have exactly the same problem since the last update. Tried to find a way to solve the problem but no luck. Someone please help!

• Satellite A210 1AP - the screen does not turn

  I had a problem about a month ago with my Toshiba Satellite A210-1AP, just that the screen did not turn. Was working on the computer, all the lights were on. The light that shows the HARD disc flickered, as usual, but with display always off. So I stop, and the next time I tried it was warking as usual, with display turned on, he asked if I want to start windows normally or in safe mode (as when it is restarted abnormally). Then worked normally for a few days, and then it happens again. At this point, I could not go to the service (computer was in warranty, and how do you prove that something happens sometimes if it happened there). So I continued to use it, and as the time past the problem was more often. So I decided to go to the service.

  Guy in the service, said that the problem is the motherboard, so he changed the motherboard and it took months for him to do, and then when I called he said that it still does not. And maybe he has change rooms, display, graphics card is perhaps a problem, that he has not seen the problem like this...

  So my question is do you know what could be the problem? And the second question is can I demand of him, because he went from 30 days to give me a new computer rather change all parties to this issue?

  Thank you
  Nikola

  Hi mate,

  It's really hard to say what causes this problem, but I think that notebok technicians do a good job and they will be committed to repair your laptop as soon as possible. Maybe they ordered some new parts, but they are not available at this time

  Theoretically, all that could be the reason of this problem FL inverter, LCD screen, motherboard, graphics card, cable, etc.

  So I think you should call the technicians still what is the current status.
  But I doubt that you can get a new laptop for free. If it of still under warranty, it will be repaired.

• My pavilion G6 - 1210 SA goes in but the screen is not

  Hello

  I tried. Turn on my g6 last night and it works but the screen is not the fan starts and the lights are normal, I tried to take the battery. Out and adapter and the second fact 30 thing that did not work, I tried without the battery and still nothing at one point it seemed that updated operating system running but the screen does not (windows 7) any help would be great because I have a lot of work to do on my laptop

  Hey AJ2106,

  First of all, I wish you welcome on the HP Forums!

  Like your laptop is by train (heard the noise of the fan and LED is lit), but the screen remains black, I suggest you to watch the following document 'computer won't start (Windows 7, Vista, XP)'. Now, this document you have already done the hard reset so you won't have to do it again once, but the part you want to follow the steps, is symptom: LEDs flow, the fan noise is heard, but the display is black or white.

  Please let me know the results of the troubleshooting steps.

  Looking forward to working with you!

• Text on the screen is not clear

  I have a new Dell Vista pc runiing. I have a LCD Ultrsharp DEll monitor. ATI @MB graphics card, the resolution is set to 1280 x 1024, everything seems OK, but any text on the screen is not clear. HE's a little fuzzy. How can I fix it?

  Hi Amber321,
   
  How long have you been faced with his problem?
   
  You make changes to the computer until this problem occurred?

  I recommend you set the screen resolution and other settings. To do this follow the link below:
   
  http://windowshelp.Microsoft.com/Windows/en-us/help/617624ee-08f3-4AFF-9713-5e84a9674a261033.mspx
    
  You can also check out the links below:
   
  Ways to improve display quality
   
  http://windowshelp.Microsoft.com/Windows/en-us/help/132c1dab-6da1-47cf-96af-8f00eceaf6f51033.mspx
   
  If the links above do not work, you can check out the link below which will be useful:
   
  Troubleshoot monitor and video card
   
  http://windowshelp.Microsoft.com/Windows/en-us/help/2582c444-448C-4fb5-ba0c-d753f88d64791033.mspx
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• My iPhone my iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  My iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  You should go to the apple store and ask them to check it for you! You may have a faulty screen or faulty motherboard! in any case it is best to call or go to the apple store