Portege M440 - Vista problems: problems of Bluetooth, the unknown device and tablet.

Similar Questions

• Root of the unknown device. ISATAP\0017

  I get pop ups telling me to update this unknown device when I first turn on the computer now Im up to about 10 popups and when I try to update... he can't do something is not.

  Hi Grannytotwo,

  ·        Do you have any external USB or firewire devices connected to the computer?

  If you have any external device connected to the computer via USB or firewire, you can disconnect all devices and start to connect the devices one by one and check which device is causing the problem and post back the result.

  You can also open the Device Manager and check that the unknown device and make a note of the error and after return from the error code. Access the link below and follow the steps to open the Device Manager.

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Also, you can try to update the drivers for the unknown device in Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not work

  Windows Media Player

  No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file."  And the media player does not work

  Reset the WMP.

  Step by step instructions are given here: -.

  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• unknown device and bluetooth probook 4530 s

  I bought a 4530 s used. He had an illegal copy of windows on it. The recovery partition was gone. I have two devices left problem. One is an unknown device. The other is a generic bluetooth. It's a xuo15ut 4530 s Details of the unknown device.

  USB\VID_138A & pid_003c & rev_0086

  USB\VID_138A & pid_003c

  Details of the generic bluetooth device

  usb\vid_03f0 & pid_311d & rev_0001

  usb\vid_03f0 & pid_311d

  Hello:

  Install this driver for the fingerprint sensor.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106154-1

  Install the Atheros bluetooth driver and software:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-94298-1

  Paul

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• I get a popup that says no audio device imput found. Make sure that your audio hardware is workingand check your audio configuration in the audio device and sound themes control anel

  I get a popup that says that no sound device imput is to make sure that your audio hardware works and check your audio configuration in the audio device and sound control panel themes

  Hello

  1. what operating system is installed on the computer?

  2. when exactly you receive this pop up?

  3. able to play sounds using Windows Media Player?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the troubleshooting provided in the link below steps to solve the problem.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• IHAVE pavilion g6 2006tx with win 8.1 pro ineed driver for the unknown device

  driver for the unknown device

  Hello:

  This is the driver you need for this device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4132&product=5278311&sw_lang=

• Connect my phone: not found a driver for the unknown device

  USB port

  wanted to connect my phone to the computer, says "not found a driver for the unknown device" what to do?

  View your manufacturers of mobile phones and FAQ about the connection to win7 support

• Problem starting with the Tecra A8 and A9 models

  We have about 20 or more, A8 and A9 Tecra notebooks and each has shown signs of the same problem again. If rebotting and netwrok cable is attached, so they will not start. Remove the cable and it is a normal startup.
  The A8 has a motherboard replacement (problem existed before the replacement) and is still there now after the replacement. The MB is replaced mainly because the sound card was dead. All machines are running XP Pro OS. The A9 is a novelty. Would be - this driver issue or - this one of my favorite - an update from MS that has caused problems.

  > If reboot and the cable network is connected, then they will not start. Remove the cable and it is a normal startup.

  Hmm that's strange.
  However, I recommend that you check the BIOS settings, please ensure that LAN is not set as first boot device.
  Also check if the BIOS has been updated to the State

  Sorry, but this is really rare and you should try universal workaround solutions that could help resolve this problem.

• Problems to show the driver IVI and property loader error messages when you use a type of operator interface

  I use UI operator (programmed in ICB, with asynchronous timer) in the folder OP1 in attached zip file. This operator interface does not have the error message from the driver of the IVI, properts, charger etc. on the screen (messages as in the photo attached error.jpg in zip file attached). Due to stability problems, I use this operator interface, but I need these error message. One other operator interface is OP2 in attached zip file. This operator interface puts the error message from the driver of the IVI, charger properts... on the screen (messages as in the photo attached error.jpg in zip file attached). Now, I want to have this feature with OP1 for reasons of stability I use OP1. How can I implement this in OP1? I tried and tried a lot of time, but I have not found a method to implement this. can someone help me? Thank you kind regards Samuel

  Hello, Johann,.

  I'm not sure you understood my problem. My problems are not the IVI and loader drivers error messages property! But my problem is, that errors of the IVI drivers and property loader operator interface does not bring on the screen. So to test this situation, cause an error of the driver of the IVI or shipper of property, then you can see that with a PC, you have an error message and with another IO no error message takes place and the test of stocks without a message. Do you know why this OI does not show the error messages and how showing the error message can be implemented in this operator interface

  concerning

  Samuel

• Problem with the unknown device - Code 43

  This USB controller has no drivers. It indicates the Version of the driver is 6.1.760.17586.

  I tried to disable and uninstall it with other USB controllers, but he returned as a unknown device vacuum.  This means that I can not connect devices to ports 3 & 4.  I am using Windows 7 32 bit.

  I'll be grateful for any advice.

  Thank you

  Andy

  This means that the other usb ports on the PC work, if so it looks more like a problem of internal connection with these two ports

• PROBLEMS TO INSTALL THE CLOUD CREATIVES AND ACROBAT READER DC PRO

  I'm trying to download the creative cloud and your applications, two weeks ago, and I can't. In the case of the clouds of Creative, the error message that is displayed is error 50. In the case of Acrobat Reader DC Pro, the message says that it is not possible to save the key in the registry. Can someone help me, please?

  Run the cleaning time Acrobat tool and check:

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs