Portege M780 - 10 H: stylus won't come out

Similar Questions

• W7 won't come out of 2560 x 1600 on my external 30 "monitor Dell

  W7 won't come out of 2560 x 1600 on my 30 external: monitor Dell, any help?

  Your video card does support this high resolution? If Yes, you have the latest drivers for it?

  Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• cartridges won't come out, says paper jam, how to get out of cartridges without killing printer.?

  cartridges aren't coming out,

  says paper jam, no paper in the printer,

  How to get out the cartridges without killing printer.?

  I did the thing video together 3 times and still won't come out? I'll call hp remote and hope they can fix it thank you

• HP TM2 TouchSmart Tablet battery not inserted right, now won't come out? Help

  Removed the battery, when I put stuck back, he won't at the moment can not remove it again. The trigger of the slide is stuck in a position to release battery but the dough will not come out.  It feeds the tm2 but not out of what can do?

  I had this happen once and a thin knife blade to gently the battery slowly along the edge and pushing the battery until it has published. It will scar the plastic if you do not work slowly & carefully.

• HP Photosmart Plus B210a won't come out of power save mode.

  The printer works fine until it sits awhile and goes into 'power saving mode'. Nothing it comes out that mode except unplug the power cord and back running the printer. I disabled the: power saving mode and have had no problems. Is there a fix so I can turn the: energy safe mode: back on?

  I have a HP Photosmart Plus B210a and it's brand new. I am using Windows 7 32 bit and I get no error message. When I ran the HP print utility, all checked in green except when I tried to print a test page and test page remained in Quebec and a red X.

  Technical support told me that the problem was a hardware problem. They sent me a new printer!

• my sidebar is displayed, but will not work. Defender won't come out, can not run safety programs

  My computer seemed a crash with sidebar, adobe Flash Player and security problems.  I can't get out to run and run.  They go out and disappear quickly.

  Sidebar will appear in the selection, but will not work.  Defender will appear just saying quickly extinguished.  Windows Security Essentials appears and extinguishes FST

  saying not up to date and will not be open for the scan.  Adobe said no uo to the latest version of flashplayer.  All it seems to be stuck and not come out.  Internet work

  fine and so email.

  Hi mgm842,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  You can try to run a scan online and check.

  Step 1:

  You can check out the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Check out the link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2:

  If you are still facing problems then try creating a new user account and check if the problem occurs:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in the new user, then check out the following link to fix a corrupted user account.

  Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

• Tecra A2 won't come out of standby

  My Tecra A2 laptop is not from standby mode several times.
  I had to remove the battery for a few minutes and replace new until it works again.
  Ideas and suggestions appreciated.

  Thank you.

  Already updated the BIOS?
  On multiple machines, the BIOS update has solved these problems standby.
  You should compare the BIOS installed on the laptop with the BIOS available on the page.
  I think that there should be a more recent version.

• HP Windows 7 home prem OA: my laptop won't come out of sleep mode after starting upwards!

  Hello I have a HP Windows 7 home prem AO. And I can't raise the lap top the sleep mod after departure. I tried rebooting with the removable battery according to the HP video help. But it does not help me I done all I can! If anyone can help me please!

  Hi there @Zotya15,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the computer not to wake. I'll be happy to help you.

  Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  I will do everything I can to help to get more information.

• Portege M780-106 - the mouse pointer position of the stylus trolling

  Question re Toshiba portege M780-106 touch screen laptop:
  We have a problem with the mouse, the position of the stylus trolling.

  This gap considerably increases the speed of the increase in movement of the stylus.
  As we had a task of monitoring with the stylus it is problematic.

  We run the task in Windows 7 using python 2.6 with mainly pygame library functions.
  Is there a way to disable the process that produces this discrepancy between stylus pointer and mouse?

  Any help much appreciated!

  Best
  Steve

  The CPU is running in performance mode? There may be a delay because the eco mode is activated, or the speed of the CPU has strangled at low speed.

• Portege M780-10V upgrade questions

  I'm glad my M780-10V and don't plan to change it too early, but I'd like to improve it.

  I upgraded RAM 8 GB, although windows 7 32-bit recognizes only 2,9 GB - ideas?

  Someone tried to move to Windows 7 64 bit, which should make more RAM available.

  Has anyone swapped the drive and installed an SSD, I think also 250GB, I guess that it should be a real boost.

  As for exchanging the i5 to an i7, I don't know who would be worthwhile - seems a costly change - as the i7 does not seem to add a lot by looking at different comparison sites.

  Thanks in advance.

  Simon

  I upgraded RAM 8 GB, although windows 7 32-bit recognizes only 2,9 GB - ideas?

  Win 7 32-bit as well as 32-bit systems recognize only 3.2 GB of RAM. This is the limit of 32-bit
  Recommended to use the 64-bit system in case you have more than 3 GB of RAM
  Portege M780-10V supports up to 8 GB of RAM so memory upgrade is possible.

  Has anyone swapped the drive and installed an SSD, I think also 250GB, I guess that it should be a real boost.

  The upgrade of the SSD HARD drive is the best move you could make... the performance gain will be noticeable. I made these updates on my Tecra laptop and am very happy with this...

  As for exchanging the i5 to an i7, I don't know who would be worthwhile - seems a costly change - as the i7 does not seem to add a lot by looking at different comparison sites.

  In my opinion, this is not necessary and I wouldn't recommend upgrade you the processor. First of all Toshiba and other laptop manufacturers do not support these updates. No one knows if these updates would not affect the functionality of the laptop, and in the worst cases, the BIOS would not support a new processor.
  At the other hand, you won't see the performance boost using new CPU... in my eyes these updates would be very useful.

• Need software preinstalled for Portege M780

  Hello

  I have reinstalled windows 7 pro on my Portege M780 and I need Toshiba pre installed Apps
  It was 7 Pro 32 bit and clean, I installed 7 Pro 64-bit Iv caught everything that is available in the download section for 7 64-bit, but not all is here.

  I used to have the cam, control rotation of the screen, DVD app and more I'm not even sure what to do as I have only had the day before installing windows :(
  If someone could help that would be great thank you

  PS I can't scanner finger to work anyway, once I installed it and set up com would not start after the login screen but did in safe mode then I disabled in Device Manager. Ideas Anyony Cheers

  I tried the pre installed applications recovery unsuccessfully :(

  Original recovery image that you got with your laptop contains the operating system, all necessary drivers, tools specific to Toshiba and utility and sure some additional software such as a DVD player, an antivirus, Office of test application.

  When you have installed OS on Toshiba download page you will find drivers, tools and utilities only. These additional requests will not be available. That you can have if you install original recovery image.

  Very important information of the end: Toshiba offer all that for operating systems supported only so if you can't find it on the download page, I can just say unlucky.
  In this case, you should try to find the right proposed drivers for other models, but with the same hardware components and it is quite complicated.

• Portege M780 + Win10 - is it possible?

  After the upgrade of my Portege M780-10R to win 10 pro or AUDIO and SCREEN TACTILE functions operate.
  I searched updated drivers, but there is nothing that win7 or an earlier version.
  Do I have a possibility to do things to work in winning 10 pro 32 bit?

  thanx

  M780 is not compatible with Win10. The touch screen is not a standard touchscreen device.

• Portege M780 finger touch does not

  Hello

  I have a Portege M780 and Windows 7 x 64.

  My laptop recognizes the pen and a point of contact devices.

  Can I use the pen is fine, no problem with that. But finger touch screen doesn´t of work. I go to the control panel and finger touch is enabled.

  I have download Wacom touch dual drivers for W7x64 web technical support Toshiba´s, but I can´t install it because when I try it says '' unsupported '' platform.

  Could someone please help?

  I have download Wacom touch dual drivers for W7x64 support Toshiba´s web

  Where did you find this 64-bit driver?
  The Toshiba European driver page does not touch Dual driver for Win 7 64 bit, but only for Win 7 32 bit

  

• Portege M780-10U frezees when using external LCD

  Hello

  I have a Toshiba Portege M780-10U running Windows 7 (x 32) SP1.
  I've updated all the drivers for the display, BIOS, etc.

  When I connect my Acer G235H laptop screen freezes after about 3 hours of operation.
  Nothing is recorded anywhere, just a complete freeze that requires a hard reset. The fan for the CPU to full power, and then runs once the freeze occurs.

  I'm not under any special graphics applications when it blocks just standard Office 2007 and IE8.
  I've isolated the gel down for display using a HP L1906 monitor and had no gel for 2 days.

  I tried the screen ACER G235H using VGA and HDMI, and I always get some freezes.

  Does anyone have ideas how I can fix this problem?

  Thank you

  > I've isolated the gel down for display using a HP L1906 monitor and had no gel for 2 days.
  For me it's really hard to believe that an external monitor may affect the functionality of the laptop, but it seems that your laptop freezes using only this special monitor (G235H).
  Use of the HP L1906 monitor everything is ok. Is this good?

  Hmm connect you the L1906 monitor to the same port as G235H?
  There may be differences between the external resolutions?

  Sorry mate, but it s really hard to tell what could bring it this maybe s a high temperature problem and perhaps its pure coincidence that freezes it cell phone using the external monitor.

• Portege M780 - names getting not transferred

  Hi guys,.

  Do you have a similar problem on Portege M780, I try to send SMS, I check the number for the name I send but the name not transferred and I had to type it manually myself... very frustrating.

  What SMS software do you use?

  If this is the Wireless Manager, try to update to the latest version on the site of support/drivers of Toshiba.