Portege R100 and Linux - function keys not working do not and the latest version of the BIOS?

Similar Questions

• Function keys not working do not after Windows 7 installation

  Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

  What can I do with this? I want to re install windows. ?

  Hello

  This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

  http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

  Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.

• function keys not working not not toshiba satellite P875

  My laptop is fairly new, less than 6 months, and I regularly put updated, but for some reason, all my function keys stopped working. The only thing they do, it's me enter and exit full screen in chrome mode. Really annoyed on this subject and any help is appreciated.

  Probably as a result of some update optional / recommended that you have installed, if you don't know not what updates have been installed when this problem first occurred, visit the support site of Tosh for your model and reinstall the correct of there drivers

• A210-17i XP function keys not working not

  Hey, I bought a Notbook Equium model: A210-17i, I downgraded to XP, and I need the function keys to work.
  It doesn't seem to be all the drivers available to me, if someone can please help me find?

  Any help would be appreciated!

  Have you installed all the drivers from Toshiba?

  Be sure to only install the driver Hotkey, modules, FN-Esse, Toshiba common controls. An update of the BIOS can also help :)

• Portege R100 and RIPREP

  Hello

  I'm having a problem with RIS and my laptop Toshiba Portege R100. When I try to extract an image from the notebook using riprep, it keeps failing. This happens even with a vanilla XP installation. All other my laptop works very well except this model.

  I noticed that since the file riprep.sif the last lines are missing from the torn picture failure. A successful image should look like this:

  [OSChooser]
  Description = "test image - Toshiba R100"
  Help =' '
  LaunchFile ="%INSTALLPATH%\%MACHINETYPE%\templates\startrom.c om»
  ImageType = SYSPREP
  Version = "5.1 (2600) '"
  SysPrepSystemRoot = "Mirror1\UserData\WINDOWS".
  HalName = halacpi.dll
  ProductType = 0

  An image failed would replace the last few lines with the following information:

  [OSChooser]
  Description = "Windows Professional.
  Help = "this will install Windows Professional in a standard configuration.
  LaunchFile = "%INSTALLPATH%\%MACHINETYPE%\templates\startrom.co m '.
  ImageType = "Flat".

  I also checked the riprep.log file to see if there was no problem there. There are some services that were not arrested before the images were torn off. However, these services also appear in other newspapers of riprep files other images which have succeeded. I also stopped these services before starting the imaging process, but the problem persists.

  I rip an image successfully just now. I showed a colleague what happens when I tried using riprep, and it worked. I was pretty stripped, but this was the first and last time.

  I should also mention that the configuration of the network is DHCP statistics. I also tried to give a static IP address.

  Any help would be appreciated.

  If you need further information do not hesitate to contact me.

  Hello

  I'm not familiar with this, but please check this Microsoft article http://support.microsoft.com/default.aspx?scid=kb;en-us;304992.

  Also check this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5558&messageID=19046#19046 topic

  Good bye

• Portege R100 and HDD upgrade

  Hello

  I have a Portege R100 and I want to upgrade the 40 GB HARD disk. What is the highest size that I could upgrade using Toshiba or not Toshiba HDD?
  There are 1.8 "SSD? What would be the best way to update?

  Thank you
  Romeo

  I have an old Portege 2000 and it's almost the same specifications your one, but my has been delivered with 20 GB of HARD drive. I've updated it with 60 GB and it works perfectly.
  I can understand your wishes on the HARD drive upgrade, but I recommend you to be a little more realistic and spend it is logical and understandable for this older model laptop.

  So I can confirm that 60 GB HARD drive will be working well. Maybe you can use the HARD disk with more capacity, but Toshiba is now your Portege with 40 GB max. What you can do is to contact the nearest Toshiba authorized maintainer and ask them if they have more experiences with the hardware upgrade on this laptop.

  To be honest, this laptop is not designed for multimedia stuff and in fact 60 GB HARD drive is quite enough for the installation of applications and for the registration of all the important things like maybe a few videos, photos and office documents.

  What you want to do with this laptop?

• Someone else has volume function keys stop working?  If so, I know a fix?

  Sometimes, my function keys stop working.  The small volume box appears and the volume is shown to change but there is no real effect on the volume.  Anyone know a fix for this other than to restart the computer?

  you have speakers connected, secure, powered?

  helmet?

   > System Preferences > Sound

  What is your output on?

• Win 10 Portege R700 and R930 works but wher is the BIOS?

  I installed W10 on my R700 and R930 successfully - but I have two minor I have questions can´t address:
  -I can not enter the BIOS - the road via advanced settings - start - troubleshooting - repair etc does not work. How can I enter BIOS in W10?
  -J' I try to update my Intel drivers through the Intel driver utility to update - but when I run this app - the App are not able to identify the Intel on my Porteges two drivers - how can it be possible? In the system information, can I see information about Intel processors - how is this possible?
  Otherwise W10 works well...

  / Anders

  Well - I found the answer to the first question - how to enter in Bios in W10 - energy options that you must disable the quick start - then you enter BIOS just taking the F12 to power. Worked on my two Portégé.
  / Anders

  I installed W10 on my R700 and R930 successfully - but I have two minor I have questions can´t address:
  -I can not enter the BIOS - the road via advanced settings - start - troubleshooting - repair etc does not work. How can I enter BIOS in W10?
  -J' I try to update my Intel drivers through the Intel driver utility to update - but when I run this app - the App are not able to identify the Intel on my Porteges two drivers - how can it be possible? In the system information, can I see information about Intel processors - how is this possible?
  Otherwise W10 works well...

  / Anders

• Visual studio displays an error message indicating that these functions are not in the context.

  Original title: c#

  I am using visual studio 2010... but when I use commands like ToInt, den ToDouble etc, it shows an error indicating that these functions are not in the frame... Please give a solution... Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• LSI Logic SCSI Ultra320 RAID Firmware and the BIOS utility. Cannot make the diskettes.

  I downloaded the pack sp29637 for Firmware LSI Logic Ultra320 SCSI RAID and the BIOS utility to my Workstation xw 8200. I'm doing a disk from the downloaded file. I runs the file, but when it tells me to put a floppy disk in the A: drive and I confirm, the window closes and the diskette is not made. Looks like the copy in the file program is corrupted.
  Does anyone have this already developed package files so I can copy them to a floppy disk?
  The files are supposed to be the following:

  Hi Sasi,

  Yes you are right. Then, I realized that I could open these files using Winzip or Winrar. I thank very you much for responding to my post.

• Satellite L310 - I can not enter the Bios settings

  Dear team,

  I have a toshiba that is always on warraty.
  Is there anyway you can help me.

  It ceased to operate effectively. It does not exceed the Bios.
  By that I mean you reach the Bios screen, but you can not enter the Bios settings.

  Details
  model: toshiba Satellite L310

  What exactly do you say: you reach the Bios screen, but you can not enter the Bios settings?
  The BIOS is secured by password or what?
  You see a splash screen of Toshiba for short time?
  Is it possible to start the Windows operating system or to recover the laptop?

  Please publish more details!

• Satellite P100 PSPA3A - Touchpad and function keys not working not

  Hello
  I'm new to the forum so please excuse my lack of computer skills.

  Where my problems began, is that I deleted the driver of my computer keyboard.
  I reinstalled and now works with the exception of the function keys.

  I tried to install Hotkeys out of the Toshiba web site without success. It will not be loaded on the computer for me.
  I also reinstalled "utilities" and in doing so the touch pad mouse has stopped working.

  Is someone able to offer, for me, what should I do to fix this?

  Thank you very much in advance for your help.
  Sam

  I never heard of a keyboard driver deleting, but if some of your buttons work so I think the software is very good. It may be a loose keyboard connector is loose, which is located under your keyboard around the buttons 'Fred '.

  I return the phone to the place of purchase and get them to fix it. Less pain for you and an easy solution. Keep it simple, everyone!

  Good luck.

• Satellite Pro A120 - error function keys not working and affected

  I have a Satellite Pro A120 PSAC1E-04Q00VEN.

  A couple of weeks, I started to have a dialog "Error of TouchED" to come to the start box (containing the message: 'Thotkey' recovery has no code error 0 X 00031402, 0x00000002) and at the same time the function keys did not work.

  I spent several hours as a result of the wide variety of questions that have been posted on this forum and elsewhere regarding this problem with computers laptop Toshiba, but nothing has worked. I reinstalled all the drivers from my initial backup disk, installed new drivers on the Toshiba site, updated the bios and restored the system to date before the problem started to occur. I also can't find Thotkey.exe everywhere on my machine.

  Can anyone help with this? It seems to be a common problem, for which he doesn't seem to be a definitive answer. Any useful response would be really appreciated.

  David

  Hey Buddy

  Go to the page of European driver of Toshiba.
  Select your laptop model and download and reinstall the tools and the following drivers:
  -Common module
  -Utilities for display devices Hotkey
  -Utilities
  -Wireless keyboard shortcut

  Check it out!

• Portege R830 - functional keys not working after installing Windows 7

  Hello
  I have Toshiba portege R830.
  I install new windows 7, no recovery - new windows.
  Now, I have a problem because my function keys don't ' t work.
  I can't turn on y wifi with fn + F8.
  I was looking for drivers, but I don't ' get there for my toshiba.

  Originally posted by Tomasz
  

  Hello
  I have Toshiba portege R830.
  I install new windows 7, no recovery - new windows.
  Now, I have a problem because my function keys don't ' t work.
  I can't turn on y wifi with fn + F8.
  I was looking for drivers, but I don't ' get there for my toshiba.

  Have you installed the VAP (value added package)

  That should restore the functionality of your

• Backlighting and function keys not working not not on Windows 10

  Hello!

  After I updated my Windows 8.1 to 10, I lost my keyboard function keys backlight (volume, brightness, etc.) and the OSD that I used to have (similar to the OSX one).

  My Bootcamp has been updated via USB, after preparation on the Mac side. Now it's on version 6.

  I tried to manually reinstall, remove all what about Apple and relocation, etc., but nothing seems to help.

  Actually I was not able to remove the support of Bootcamp, because there was no option at this point.

  My MBP is mid-2012.

  Do you know what I can do to fix this?

  Thank you!!!

  Gustavo

  In your device manager, you have the Apple keyboard driver? You have an element of Bootcamp in the Panel?